/* Copyright 2023 Dual Tachyon
 * https://github.com/DualTachyon
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 *     Unless required by applicable law or agreed to in writing, software
 *     distributed under the License is distributed on an "AS IS" BASIS,
 *     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *     See the License for the specific language governing permissions and
 *     limitations under the License.
 */

#ifndef RADIO_H
#define RADIO_H

#include <stdbool.h>
#include <stdint.h>
#include "dcs.h"

enum {
	MR_CH_SCANLIST1 = (1U << 7),
	MR_CH_SCANLIST2 = (1U << 6),
	MR_CH_BAND_MASK = 0x0FU,
};

enum {
	RADIO_CHANNEL_UP = 0x01U,
	RADIO_CHANNEL_DOWN = 0xFFU,
};

enum {
	BANDWIDTH_WIDE = 0U,
	BANDWIDTH_NARROW = 1U,
};

enum PTT_ID_t {
	PTT_ID_OFF  = 0U,
	PTT_ID_BOT  = 1U,
	PTT_ID_EOT  = 2U,
	PTT_ID_BOTH = 3U,
};

typedef enum PTT_ID_t PTT_ID_t;

enum STEP_Setting_t {
	STEP_2_5kHz,
	STEP_5_0kHz,
	STEP_6_25kHz,
	STEP_10_0kHz,
	STEP_12_5kHz,
	STEP_25_0kHz,
	STEP_8_33kHz,
};

typedef enum STEP_Setting_t STEP_Setting_t;

typedef struct {
	uint32_t Frequency;
	DCS_CodeType_t CodeType;
	uint8_t Code;
	uint8_t Padding[2];
} FREQ_Config_t;

typedef struct VFO_Info_t {
	FREQ_Config_t ConfigRX;
	FREQ_Config_t ConfigTX;
	FREQ_Config_t *pCurrent;
	FREQ_Config_t *pReverse;
	uint32_t FREQUENCY_OF_DEVIATION;
	uint16_t StepFrequency;
	uint8_t CHANNEL_SAVE;
	uint8_t FREQUENCY_DEVIATION_SETTING;
	uint8_t SquelchOpenRSSIThresh;
	uint8_t SquelchOpenNoiseThresh;
	uint8_t SquelchCloseGlitchThresh;
	uint8_t SquelchCloseRSSIThresh;
	uint8_t SquelchCloseNoiseThresh;
	uint8_t SquelchOpenGlitchThresh;
	STEP_Setting_t STEP_SETTING;
	uint8_t OUTPUT_POWER;
	uint8_t TXP_CalculatedSetting;
	bool FrequencyReverse;
	uint8_t SCRAMBLING_TYPE;
	uint8_t CHANNEL_BANDWIDTH;
	uint8_t SCANLIST1_PARTICIPATION;
	uint8_t SCANLIST2_PARTICIPATION;
	uint8_t Band;
	uint8_t DTMF_DECODING_ENABLE;
	PTT_ID_t DTMF_PTT_ID_TX_MODE;
	uint8_t BUSY_CHANNEL_LOCK;
	uint8_t AM_CHANNEL_MODE;
	bool IsAM;
	char Name[16];
} VFO_Info_t;

extern VFO_Info_t *gTxInfo;
extern VFO_Info_t *gRxInfo;
extern VFO_Info_t *gCrossTxRadioInfo;

extern DCS_CodeType_t gCodeType;
extern DCS_CodeType_t gCopyOfCodeType;
extern uint8_t gCode;

extern STEP_Setting_t gStepSetting;

bool RADIO_CheckValidChannel(uint16_t ChNum, bool bCheckScanList, uint8_t RadioNum);
uint8_t RADIO_FindNextChannel(uint8_t ChNum, int8_t Direction, bool bCheckScanList, uint8_t RadioNum);
void RADIO_InitInfo(VFO_Info_t *pInfo, uint8_t ChannelSave, uint8_t ChIndex, uint32_t Frequency);
void RADIO_ConfigureChannel(uint8_t RadioNum, uint32_t Arg);
void RADIO_ConfigureSquelchAndOutputPower(VFO_Info_t *pInfo);
void RADIO_ApplyOffset(VFO_Info_t *pInfo);
void RADIO_ConfigureTX(void);
void RADIO_ConfigureCrossTX(void);
void RADIO_SetupRegisters(bool bSwitchToFunction0);
void RADIO_ConfigureNOAA(void);
void RADIO_PrepareTransmit(void);

void RADIO_SomethingElse(uint8_t Arg);
void RADIO_SomethingWithTransmit(void);
void RADIO_EnableCxCSS(void);
void RADIO_Something(void);
void RADIO_Whatever(void);
void RADIO_SendEndOfTransmission(void);

#endif