custom-uv-k5-firmware/settings.h

/* Copyright 2023 Dual Tachyon
 * https://github.com/DualTachyon
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 *     Unless required by applicable law or agreed to in writing, software
 *     distributed under the License is distributed on an "AS IS" BASIS,
 *     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *     See the License for the specific language governing permissions and
 *     limitations under the License.
 */

#ifndef SETTINGS_H
#define SETTINGS_H

#include <stdbool.h>
#include <stdint.h>
#include "radio.h"

enum POWER_OnDisplayMode_t {
	POWER_ON_DISPLAY_MODE_FULL_SCREEN = 0U,
	POWER_ON_DISPLAY_MODE_VOLTAGE     = 2U,
};

typedef enum POWER_OnDisplayMode_t POWER_OnDisplayMode_t;

enum {
	F_LOCK_OFF = 0U,
	F_LOCK_FCC = 1U,
	F_LOCK_CE  = 2U,
	F_LOCK_GB  = 3U,
	F_LOCK_430 = 4U,
	F_LOCK_438 = 5U,
};

enum {
	SCAN_RESUME_TO = 0U,
	SCAN_RESUME_CO = 1U,
	SCAN_RESUME_SE = 2U,
};

enum {
	CROSS_BAND_OFF = 0U,
	CROSS_BAND_CHAN_A = 1U,
	CROSS_BAND_CHAN_B = 2U,
};

enum {
	DUAL_WATCH_OFF = 0U,
	DUAL_WATCH_CHAN_A = 1U,
	DUAL_WATCH_CHAN_B = 2U,
};

enum {
	FREQUENCY_DEVIATION_OFF = 0U,
	FREQUENCY_DEVIATION_ADD = 1U,
	FREQUENCY_DEVIATION_SUB = 2U,
};

enum {
	OUTPUT_POWER_LOW = 0U,
	OUTPUT_POWER_MID = 1U,
	OUTPUT_POWER_HIGH = 2U,
};

enum VOICE_Prompt_t {
	VOICE_PROMPT_OFF = 0U,
	VOICE_PROMPT_CHINESE = 1U,
	VOICE_PROMPT_ENGLISH = 2U,
};

typedef enum VOICE_Prompt_t VOICE_Prompt_t;

enum ALARM_Mode_t {
	ALARM_MODE_SITE = 0U,
	ALARM_MODE_TONE = 1U,
};

typedef enum ALARM_Mode_t ALARM_Mode_t;

typedef struct {
	uint8_t VfoChannel[2];
	uint8_t EEPROM_0E82_0E85[2];
	uint8_t EEPROM_0E81_0E84[2];
	uint8_t EEPROM_0E86;
	uint8_t EEPROM_0E87;
	uint8_t RX_CHANNEL;
	uint8_t TX_CHANNEL;
	uint8_t field7_0xa;
	uint8_t field8_0xb;
	uint32_t POWER_ON_PASSWORD;
	uint8_t SQUELCH_LEVEL;
	uint8_t TX_TIMEOUT_TIMER;
	bool KEY_LOCK;
	bool VOX_SWITCH;
	uint8_t VOX_LEVEL;
	VOICE_Prompt_t VOICE_PROMPT;
	bool BEEP_CONTROL;
	uint8_t CHANNEL_DISPLAY_MODE;
	bool TAIL_NOTE_ELIMINATION;
	bool VFO_OPEN;
	uint8_t DUAL_WATCH;
	uint8_t CROSS_BAND_RX_TX;
	uint8_t BATTERY_SAVE;
	uint8_t BACKLIGHT;
	uint8_t SCAN_RESUME_MODE;
	uint8_t SCAN_LIST_DEFAULT;
	bool SCAN_LIST_ENABLED[2];
	uint8_t SCANLIST_PRIORITY_CH1[2];
	uint8_t SCANLIST_PRIORITY_CH2[2];
	uint8_t field29_0x26;
	uint8_t field30_0x27;
	uint16_t VOX1_THRESHOLD;
	uint16_t VOX0_THRESHOLD;
	uint16_t FM_CurrentFrequency;
	uint8_t FM_CurrentChannel;
	bool FM_IsChannelSelected;
	uint16_t FM_FrequencyToPlay;
	uint8_t field37_0x32;
	uint8_t field38_0x33;
	uint16_t FM_LowerLimit;
	uint16_t FM_UpperLimit;
	bool AUTO_KEYPAD_LOCK;
	ALARM_Mode_t ALARM_MODE;
	POWER_OnDisplayMode_t POWER_ON_DISPLAY_MODE;
	uint8_t ROGER;
	uint8_t REPEATER_TAIL_TONE_ELIMINATION;
	uint8_t KEY_1_SHORT_PRESS_ACTION;
	uint8_t KEY_1_LONG_PRESS_ACTION;
	uint8_t KEY_2_SHORT_PRESS_ACTION;
	uint8_t KEY_2_LONG_PRESS_ACTION;
	uint8_t MIC_SENSITIVITY;
	uint8_t MIC_SENSITIVITY_TUNING;
	uint8_t CHAN_1_CALL;
	char ANI_DTMF_ID[8];
	char KILL_CODE[8];
	char REVIVE_CODE[8];
	char DTMF_UP_CODE[16];
	uint8_t field57_0x6c;
	uint8_t field58_0x6d;
	char DTMF_DOWN_CODE[16];
	uint8_t field60_0x7e;
	uint8_t field61_0x7f;
	char DTMF_SEPARATE_CODE;
	char DTMF_GROUP_CALL_CODE;
	uint8_t DTMF_DECODE_RESPONSE;
	uint8_t DTMF_AUTO_RESET_TIME;
	uint16_t DTMF_PRELOAD_TIME;
	uint16_t DTMF_FIRST_CODE_PERSIST_TIME;
	uint16_t DTMF_HASH_CODE_PERSIST_TIME;
	uint16_t DTMF_CODE_PERSIST_TIME;
	uint16_t DTMF_CODE_INTERVAL_TIME;
	bool DTMF_SIDE_TONE;
	bool PERMIT_REMOTE_KILL;
	int16_t BK4819_XTAL_FREQ_LOW;
	bool NOAA_AUTO_SCAN;
	uint8_t VOLUME_GAIN;
	uint8_t DAC_GAIN;
	uint8_t field77_0x95;
	uint8_t field78_0x96;
	uint8_t field79_0x97;
	VFO_Info_t VfoInfo[2];
} EEPROM_Config_t;

extern EEPROM_Config_t gEeprom;

void SETTINGS_SaveFM(void);
void SETTINGS_SaveVfoIndices(void);
void SETTINGS_SaveSettings(void);
void SETTINGS_SaveChannel(uint8_t Channel, uint8_t VFO, const VFO_Info_t *pVFO, uint8_t Mode);
void SETTINGS_UpdateChannel(uint8_t Channel, const VFO_Info_t *pVFO, bool bUpdate);

#endif