uv-k5-firmware/settings.c
2023-10-06 09:00:13 +01:00

271 lines
6.9 KiB
C

/* Copyright 2023 Dual Tachyon
* https://github.com/DualTachyon
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <string.h>
#if defined(ENABLE_FMRADIO)
#include "app/fm.h"
#endif
#include "driver/eeprom.h"
#if defined(ENABLE_UART)
#include "driver/uart.h"
#endif
#include "misc.h"
#include "settings.h"
EEPROM_Config_t gEeprom;
#if defined(ENABLE_FMRADIO)
void SETTINGS_SaveFM(void)
{
uint8_t i;
struct {
uint16_t Frequency;
uint8_t Channel;
bool IsChannelSelected;
uint8_t Padding[4];
} State;
#if defined(ENABLE_UART)
UART_LogSend("sFm\r\n", 5);
#endif
memset(&State, 0xFF, sizeof(State));
State.Channel = gEeprom.FM_SelectedChannel;
State.Frequency = gEeprom.FM_SelectedFrequency;
State.IsChannelSelected = gEeprom.FM_IsMrMode;
EEPROM_WriteBuffer(0x0E88, &State);
for (i = 0; i < 5; i++) {
EEPROM_WriteBuffer(0x0E40 + (i * 8), &gFM_Channels[i * 4]);
}
}
#endif
void SETTINGS_SaveVfoIndices(void)
{
uint8_t State[8];
#if defined(ENABLE_UART)
UART_LogSend("sidx\r\n", 6);
#endif
State[0] = gEeprom.ScreenChannel[0];
State[1] = gEeprom.MrChannel[0];
State[2] = gEeprom.FreqChannel[0];
State[3] = gEeprom.ScreenChannel[1];
State[4] = gEeprom.MrChannel[1];
State[5] = gEeprom.FreqChannel[1];
State[6] = gEeprom.NoaaChannel[0];
State[7] = gEeprom.NoaaChannel[1];
EEPROM_WriteBuffer(0x0E80, State);
}
void SETTINGS_SaveSettings(void)
{
uint8_t State[8];
uint32_t Password[2];
#if defined(ENABLE_UART)
UART_LogSend("spub\r\n", 6);
#endif
State[0] = gEeprom.CHAN_1_CALL;
State[1] = gEeprom.SQUELCH_LEVEL;
State[2] = gEeprom.TX_TIMEOUT_TIMER;
State[3] = gEeprom.NOAA_AUTO_SCAN;
State[4] = gEeprom.KEY_LOCK;
State[5] = gEeprom.VOX_SWITCH;
State[6] = gEeprom.VOX_LEVEL;
State[7] = gEeprom.MIC_SENSITIVITY;
EEPROM_WriteBuffer(0x0E70, State);
State[0] = 0xFF;
State[1] = gEeprom.CHANNEL_DISPLAY_MODE;
State[2] = gEeprom.CROSS_BAND_RX_TX;
State[3] = gEeprom.BATTERY_SAVE;
State[4] = gEeprom.DUAL_WATCH;
State[5] = gEeprom.BACKLIGHT;
State[6] = gEeprom.TAIL_NOTE_ELIMINATION;
State[7] = gEeprom.VFO_OPEN;
EEPROM_WriteBuffer(0x0E78, State);
State[0] = gEeprom.BEEP_CONTROL;
State[1] = gEeprom.KEY_1_SHORT_PRESS_ACTION;
State[2] = gEeprom.KEY_1_LONG_PRESS_ACTION;
State[3] = gEeprom.KEY_2_SHORT_PRESS_ACTION;
State[4] = gEeprom.KEY_2_LONG_PRESS_ACTION;
State[5] = gEeprom.SCAN_RESUME_MODE;
State[6] = gEeprom.AUTO_KEYPAD_LOCK;
State[7] = gEeprom.POWER_ON_DISPLAY_MODE;
EEPROM_WriteBuffer(0x0E90, State);
memset(Password, 0xFF, sizeof(Password));
Password[0] = gEeprom.POWER_ON_PASSWORD;
EEPROM_WriteBuffer(0x0E98, Password);
memset(State, 0xFF, sizeof(State));
State[0] = gEeprom.VOICE_PROMPT;
EEPROM_WriteBuffer(0x0EA0, State);
#if defined(ENABLE_ALARM)
State[0] = gEeprom.ALARM_MODE;
#else
State[0] = 0xFF;
#endif
State[1] = gEeprom.ROGER;
State[2] = gEeprom.REPEATER_TAIL_TONE_ELIMINATION;
State[3] = gEeprom.TX_CHANNEL;
EEPROM_WriteBuffer(0x0EA8, State);
State[0] = gEeprom.DTMF_SIDE_TONE;
State[1] = gEeprom.DTMF_SEPARATE_CODE;
State[2] = gEeprom.DTMF_GROUP_CALL_CODE;
State[3] = gEeprom.DTMF_DECODE_RESPONSE;
State[4] = gEeprom.DTMF_AUTO_RESET_TIME;
State[5] = gEeprom.DTMF_PRELOAD_TIME / 10U;
State[6] = gEeprom.DTMF_FIRST_CODE_PERSIST_TIME / 10U;
State[7] = gEeprom.DTMF_HASH_CODE_PERSIST_TIME / 10U;
EEPROM_WriteBuffer(0x0ED0, State);
memset(State, 0xFF, sizeof(State));
State[0] = gEeprom.DTMF_CODE_PERSIST_TIME / 10U;
State[1] = gEeprom.DTMF_CODE_INTERVAL_TIME / 10U;
State[2] = gEeprom.PERMIT_REMOTE_KILL;
EEPROM_WriteBuffer(0x0ED8, State);
State[0] = gEeprom.SCAN_LIST_DEFAULT;
State[1] = gEeprom.SCAN_LIST_ENABLED[0];
State[2] = gEeprom.SCANLIST_PRIORITY_CH1[0];
State[3] = gEeprom.SCANLIST_PRIORITY_CH2[0];
State[4] = gEeprom.SCAN_LIST_ENABLED[1];
State[5] = gEeprom.SCANLIST_PRIORITY_CH1[1];
State[6] = gEeprom.SCANLIST_PRIORITY_CH2[1];
State[7] = 0xFF;
EEPROM_WriteBuffer(0x0F18, State);
memset(State, 0xFF, sizeof(State));
State[0] = gSetting_F_LOCK;
State[1] = gSetting_350TX;
State[2] = gSetting_KILLED;
State[3] = gSetting_200TX;
State[4] = gSetting_500TX;
State[5] = gSetting_350EN;
State[6] = gSetting_ScrambleEnable;
EEPROM_WriteBuffer(0x0F40, State);
}
void SETTINGS_SaveChannel(uint8_t Channel, uint8_t VFO, const VFO_Info_t *pVFO, uint8_t Mode)
{
#if defined(ENABLE_UART)
UART_LogSend("schn\r\n", 6);
#endif
if (IS_NOT_NOAA_CHANNEL(Channel)) {
uint16_t OffsetMR;
uint16_t OffsetVFO;
OffsetMR = 0x0000 + (Channel * 16);
OffsetVFO = OffsetMR;
if (!IS_MR_CHANNEL(Channel)) {
if (VFO == 0) {
OffsetVFO = 0x0C80 + ((Channel - FREQ_CHANNEL_FIRST) * 32);
} else {
OffsetVFO = 0x0C90 + ((Channel - FREQ_CHANNEL_FIRST) * 32);
}
}
if (Mode == 2 || !IS_MR_CHANNEL(Channel)) {
uint32_t State32[2];
uint8_t State8[8];
State32[0] = pVFO->ConfigRX.Frequency;
State32[1] = pVFO->FREQUENCY_OF_DEVIATION;
EEPROM_WriteBuffer(OffsetVFO + 0, State32);
State8[0] = pVFO->ConfigRX.Code;
State8[1] = pVFO->ConfigTX.Code;
State8[2] = (pVFO->ConfigTX.CodeType << 4) | pVFO->ConfigRX.CodeType;
State8[3] = (pVFO->AM_CHANNEL_MODE << 4) | pVFO->FREQUENCY_DEVIATION_SETTING;
State8[4] = 0
| (pVFO->BUSY_CHANNEL_LOCK << 4)
| (pVFO->OUTPUT_POWER << 2)
| (pVFO->CHANNEL_BANDWIDTH << 1)
| (pVFO->FrequencyReverse << 0)
;
State8[5] = (pVFO->DTMF_PTT_ID_TX_MODE << 1) | pVFO->DTMF_DECODING_ENABLE;
State8[6] = pVFO->STEP_SETTING;
State8[7] = pVFO->SCRAMBLING_TYPE;
EEPROM_WriteBuffer(OffsetVFO + 8, State8);
SETTINGS_UpdateChannel(Channel, pVFO, true);
if (IS_MR_CHANNEL(Channel)) {
memset(&State32, 0xFF, sizeof(State32));
EEPROM_WriteBuffer(OffsetMR + 0x0F50, State32);
EEPROM_WriteBuffer(OffsetMR + 0x0F58, State32);
}
}
}
}
void SETTINGS_UpdateChannel(uint8_t Channel, const VFO_Info_t *pVFO, bool bUpdate)
{
#if defined(ENABLE_UART)
UART_LogSend("svalid\r\n", 8);
#endif
if (IS_NOT_NOAA_CHANNEL(Channel)) {
uint8_t State[8];
uint16_t Offset;
uint8_t Attributes;
Offset = 0x0D60 + (Channel & ~7U);
EEPROM_ReadBuffer(Offset, State, sizeof(State));
if (bUpdate) {
Attributes = 0
| (pVFO->SCANLIST1_PARTICIPATION << 7)
| (pVFO->SCANLIST2_PARTICIPATION << 6)
| (pVFO->Band << 0);
if (State[Channel & 7U] == Attributes) {
return;
}
} else {
Attributes = 0xFF;
}
State[Channel & 7U] = Attributes;
EEPROM_WriteBuffer(Offset, State);
gMR_ChannelAttributes[Channel] = Attributes;
}
}