uv-k5-firmware/settings.h
2023-10-14 19:48:36 +01:00

195 lines
4.4 KiB
C

/* Copyright 2023 Dual Tachyon
* https://github.com/DualTachyon
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef SETTINGS_H
#define SETTINGS_H
#include <stdbool.h>
#include <stdint.h>
#include "radio.h"
enum POWER_OnDisplayMode_t {
POWER_ON_DISPLAY_MODE_FULL_SCREEN = 0U,
POWER_ON_DISPLAY_MODE_MESSAGE = 1U,
POWER_ON_DISPLAY_MODE_VOLTAGE = 2U,
};
typedef enum POWER_OnDisplayMode_t POWER_OnDisplayMode_t;
enum {
F_LOCK_OFF = 0U,
F_LOCK_FCC = 1U,
F_LOCK_CE = 2U,
F_LOCK_GB = 3U,
F_LOCK_430 = 4U,
F_LOCK_438 = 5U,
};
enum {
SCAN_RESUME_TO = 0U,
SCAN_RESUME_CO = 1U,
SCAN_RESUME_SE = 2U,
};
enum {
CROSS_BAND_OFF = 0U,
CROSS_BAND_CHAN_A = 1U,
CROSS_BAND_CHAN_B = 2U,
};
enum {
DUAL_WATCH_OFF = 0U,
DUAL_WATCH_CHAN_A = 1U,
DUAL_WATCH_CHAN_B = 2U,
};
enum {
FREQUENCY_DEVIATION_OFF = 0U,
FREQUENCY_DEVIATION_ADD = 1U,
FREQUENCY_DEVIATION_SUB = 2U,
};
enum {
OUTPUT_POWER_LOW = 0U,
OUTPUT_POWER_MID = 1U,
OUTPUT_POWER_HIGH = 2U,
};
enum VOICE_Prompt_t {
VOICE_PROMPT_OFF = 0U,
VOICE_PROMPT_CHINESE = 1U,
VOICE_PROMPT_ENGLISH = 2U,
};
typedef enum VOICE_Prompt_t VOICE_Prompt_t;
enum ALARM_Mode_t {
ALARM_MODE_SITE = 0U,
ALARM_MODE_TONE = 1U,
};
typedef enum ALARM_Mode_t ALARM_Mode_t;
enum ROGER_Mode_t {
ROGER_MODE_OFF = 0U,
ROGER_MODE_ROGER = 1U,
ROGER_MODE_MDC = 2U,
};
typedef enum ROGER_Mode_t ROGER_Mode_t;
enum CHANNEL_DisplayMode_t {
MDF_FREQUENCY = 0U,
MDF_CHANNEL = 1U,
MDF_NAME = 2U,
};
typedef enum CHANNEL_DisplayMode_t CHANNEL_DisplayMode_t;
typedef struct {
uint8_t ScreenChannel[2];
uint8_t FreqChannel[2];
uint8_t MrChannel[2];
uint8_t NoaaChannel[2];
uint8_t RX_VFO;
uint8_t TX_VFO;
uint8_t field7_0xa;
uint8_t field8_0xb;
uint32_t POWER_ON_PASSWORD;
uint8_t SQUELCH_LEVEL;
uint8_t TX_TIMEOUT_TIMER;
bool KEY_LOCK;
bool VOX_SWITCH;
uint8_t VOX_LEVEL;
VOICE_Prompt_t VOICE_PROMPT;
bool BEEP_CONTROL;
uint8_t CHANNEL_DISPLAY_MODE;
bool TAIL_NOTE_ELIMINATION;
bool VFO_OPEN;
uint8_t DUAL_WATCH;
uint8_t CROSS_BAND_RX_TX;
uint8_t BATTERY_SAVE;
uint8_t BACKLIGHT;
uint8_t SCAN_RESUME_MODE;
uint8_t SCAN_LIST_DEFAULT;
bool SCAN_LIST_ENABLED[2];
uint8_t SCANLIST_PRIORITY_CH1[2];
uint8_t SCANLIST_PRIORITY_CH2[2];
uint8_t field29_0x26;
uint8_t field30_0x27;
uint16_t VOX1_THRESHOLD;
uint16_t VOX0_THRESHOLD;
uint16_t FM_SelectedFrequency;
uint8_t FM_SelectedChannel;
bool FM_IsMrMode;
uint16_t FM_FrequencyPlaying;
uint8_t field37_0x32;
uint8_t field38_0x33;
uint16_t FM_LowerLimit;
uint16_t FM_UpperLimit;
bool AUTO_KEYPAD_LOCK;
ALARM_Mode_t ALARM_MODE;
POWER_OnDisplayMode_t POWER_ON_DISPLAY_MODE;
ROGER_Mode_t ROGER;
uint8_t REPEATER_TAIL_TONE_ELIMINATION;
uint8_t KEY_1_SHORT_PRESS_ACTION;
uint8_t KEY_1_LONG_PRESS_ACTION;
uint8_t KEY_2_SHORT_PRESS_ACTION;
uint8_t KEY_2_LONG_PRESS_ACTION;
uint8_t MIC_SENSITIVITY;
uint8_t MIC_SENSITIVITY_TUNING;
uint8_t CHAN_1_CALL;
char ANI_DTMF_ID[8];
char KILL_CODE[8];
char REVIVE_CODE[8];
char DTMF_UP_CODE[16];
uint8_t field57_0x6c;
uint8_t field58_0x6d;
char DTMF_DOWN_CODE[16];
uint8_t field60_0x7e;
uint8_t field61_0x7f;
char DTMF_SEPARATE_CODE;
char DTMF_GROUP_CALL_CODE;
uint8_t DTMF_DECODE_RESPONSE;
uint8_t DTMF_AUTO_RESET_TIME;
uint16_t DTMF_PRELOAD_TIME;
uint16_t DTMF_FIRST_CODE_PERSIST_TIME;
uint16_t DTMF_HASH_CODE_PERSIST_TIME;
uint16_t DTMF_CODE_PERSIST_TIME;
uint16_t DTMF_CODE_INTERVAL_TIME;
bool DTMF_SIDE_TONE;
bool PERMIT_REMOTE_KILL;
int16_t BK4819_XTAL_FREQ_LOW;
bool NOAA_AUTO_SCAN;
uint8_t VOLUME_GAIN;
uint8_t DAC_GAIN;
uint8_t field77_0x95;
uint8_t field78_0x96;
uint8_t field79_0x97;
VFO_Info_t VfoInfo[2];
} EEPROM_Config_t;
extern EEPROM_Config_t gEeprom;
void SETTINGS_SaveFM(void);
void SETTINGS_SaveVfoIndices(void);
void SETTINGS_SaveSettings(void);
void SETTINGS_SaveChannel(uint8_t Channel, uint8_t VFO, const VFO_Info_t *pVFO, uint8_t Mode);
void SETTINGS_UpdateChannel(uint8_t Channel, const VFO_Info_t *pVFO, bool bUpdate);
#endif