mirror/postgresql
2
0
Fork 0
mirror of https://git.postgresql.org/git/postgresql.git synced 2024-12-21 08:29:39 +08:00
Code Issues Packages Projects Releases Wiki Activity
89f4f4a8e5
postgresql/doc/TODO.detail/update

513 lines
20 KiB
Plaintext
Raw Blame History

From pgsql-hackers-owner+M15878=candle.pha.pa.us=pgman@postgresql.org Mon Nov 26 18:35:28 2001
Return-path: <pgsql-hackers-owner+M15878=candle.pha.pa.us=pgman@postgresql.org>
Received: from rs.postgresql.org (server1.pgsql.org [64.39.15.238] (may be forged))
by candle.pha.pa.us (8.11.6/8.10.1) with ESMTP id fAQNZRf08314
for <pgman@candle.pha.pa.us>; Mon, 26 Nov 2001 18:35:28 -0500 (EST)
Received: from postgresql.org (postgresql.org [64.49.215.8])
by rs.postgresql.org (8.11.6/8.11.6) with ESMTP id fAQNXtR48254
for <pgman@candle.pha.pa.us>; Mon, 26 Nov 2001 17:34:22 -0600 (CST)
(envelope-from pgsql-hackers-owner+M15878=candle.pha.pa.us=pgman@postgresql.org)
Received: from sss.pgh.pa.us ([192.204.191.242])
by postgresql.org (8.11.3/8.11.4) with ESMTP id fAQNSam38109
for <pgsql-hackers@postgresql.org>; Mon, 26 Nov 2001 18:28:36 -0500 (EST)
(envelope-from tgl@sss.pgh.pa.us)
Received: from sss2.sss.pgh.pa.us (tgl@localhost [127.0.0.1])
by sss.pgh.pa.us (8.11.4/8.11.4) with ESMTP id fAQNSIk16033;
Mon, 26 Nov 2001 18:28:18 -0500 (EST)
To: Bruce Momjian <pgman@candle.pha.pa.us>
cc: Philip Warner <pjw@rhyme.com.au>, pgsql-hackers@postgresql.org
Subject: Re: [HACKERS] Minor buglet in update...from (I think)
In-Reply-To: <200111262022.fAQKMtj16709@candle.pha.pa.us>
References: <200111262022.fAQKMtj16709@candle.pha.pa.us>
Comments: In-reply-to Bruce Momjian <pgman@candle.pha.pa.us>
message dated "Mon, 26 Nov 2001 15:22:55 -0500"
Date: Mon, 26 Nov 2001 18:28:17 -0500
Message-ID: <16030.1006817297@sss.pgh.pa.us>
From: Tom Lane <tgl@sss.pgh.pa.us>
Precedence: bulk
Sender: pgsql-hackers-owner@postgresql.org
Status: ORr
Bruce Momjian <pgman@candle.pha.pa.us> writes:
> Can anyone explain this failure? It still exists in CVS.
>> update t1 set f2=count(*) from t2 where t1.f1=2 and t2.f1=t1.f1 ;
>> ERROR: ExecutePlan: (junk) `ctid' is NULL!
As I recall, discussion about fixing that problem trailed off because
no one could explain what an aggregate means in UPDATE. My thought
is we should probably forbid the construct entirely (SQL does).
See previous discussion around 7/7/00.
regards, tom lane
---------------------------(end of broadcast)---------------------------
TIP 1: subscribe and unsubscribe commands go to majordomo@postgresql.org
From tgl@sss.pgh.pa.us Mon Nov 26 19:28:31 2001
Return-path: <tgl@sss.pgh.pa.us>
Received: from sss.pgh.pa.us (root@[192.204.191.242])
by candle.pha.pa.us (8.11.6/8.10.1) with ESMTP id fAR0SVf13056
for <pgman@candle.pha.pa.us>; Mon, 26 Nov 2001 19:28:31 -0500 (EST)
Received: from sss2.sss.pgh.pa.us (tgl@localhost [127.0.0.1])
by sss.pgh.pa.us (8.11.4/8.11.4) with ESMTP id fAR0SVk16312;
Mon, 26 Nov 2001 19:28:31 -0500 (EST)
To: Bruce Momjian <pgman@candle.pha.pa.us>
cc: Philip Warner <pjw@rhyme.com.au>, pgsql-hackers@postgresql.org
Subject: Re: [HACKERS] Minor buglet in update...from (I think)
In-Reply-To: <200111270023.fAR0NHJ12366@candle.pha.pa.us>
References: <200111270023.fAR0NHJ12366@candle.pha.pa.us>
Comments: In-reply-to Bruce Momjian <pgman@candle.pha.pa.us>
message dated "Mon, 26 Nov 2001 19:23:17 -0500"
Date: Mon, 26 Nov 2001 19:28:31 -0500
Message-ID: <16309.1006820911@sss.pgh.pa.us>
From: Tom Lane <tgl@sss.pgh.pa.us>
Status: ORr
Bruce Momjian <pgman@candle.pha.pa.us> writes:
> Oh, so it is the aggregate. What threw me off is that both parts of the
> WHERE clause are required to cause the failure,
Not necessarily; I think it's got more to do with a null aggregate
result:
regression=# create table t1 (f1 datetime);
CREATE
regression=# create table t2 (f2 datetime);
CREATE
regression=# update t2 set f2 = min(f1) from t1;
ERROR: ExecutePlan: (junk) `ctid' is NULL!
regression=# insert into t1 values ('now');
INSERT 400577 1
regression=# update t2 set f2 = min(f1) from t1;
ERROR: ExecutePlan: (junk) `ctid' is NULL!
regression=# insert into t2 values ('now');
INSERT 400578 1
regression=# update t2 set f2 = min(f1) from t1;
UPDATE 1
regression=#
However the ERROR is only one symptom. The real problem is that the
calculation that's being done is useless/nonsensical.
> I don't see a problem with aggregates in UPDATE,
Think harder ... what is the aggregate being taken over, and how do you
associate the aggregate's single result row with any particular row in
the UPDATE's target table?
regards, tom lane
From pgsql-hackers-owner+M15883=candle.pha.pa.us=pgman@postgresql.org Mon Nov 26 19:40:39 2001
Return-path: <pgsql-hackers-owner+M15883=candle.pha.pa.us=pgman@postgresql.org>
Received: from rs.postgresql.org (server1.pgsql.org [64.39.15.238] (may be forged))
by candle.pha.pa.us (8.11.6/8.10.1) with ESMTP id fAR0ecf14089
for <pgman@candle.pha.pa.us>; Mon, 26 Nov 2001 19:40:38 -0500 (EST)
Received: from postgresql.org (postgresql.org [64.49.215.8])
by rs.postgresql.org (8.11.6/8.11.6) with ESMTP id fAR0YFR49958
for <pgman@candle.pha.pa.us>; Mon, 26 Nov 2001 18:37:54 -0600 (CST)
(envelope-from pgsql-hackers-owner+M15883=candle.pha.pa.us=pgman@postgresql.org)
Received: from sss.pgh.pa.us ([192.204.191.242])
by postgresql.org (8.11.3/8.11.4) with ESMTP id fAR0Sjm40352
for <pgsql-hackers@postgresql.org>; Mon, 26 Nov 2001 19:28:45 -0500 (EST)
(envelope-from tgl@sss.pgh.pa.us)
Received: from sss2.sss.pgh.pa.us (tgl@localhost [127.0.0.1])
by sss.pgh.pa.us (8.11.4/8.11.4) with ESMTP id fAR0SVk16312;
Mon, 26 Nov 2001 19:28:31 -0500 (EST)
To: Bruce Momjian <pgman@candle.pha.pa.us>
cc: Philip Warner <pjw@rhyme.com.au>, pgsql-hackers@postgresql.org
Subject: Re: [HACKERS] Minor buglet in update...from (I think)
In-Reply-To: <200111270023.fAR0NHJ12366@candle.pha.pa.us>
References: <200111270023.fAR0NHJ12366@candle.pha.pa.us>
Comments: In-reply-to Bruce Momjian <pgman@candle.pha.pa.us>
message dated "Mon, 26 Nov 2001 19:23:17 -0500"
Date: Mon, 26 Nov 2001 19:28:31 -0500
Message-ID: <16309.1006820911@sss.pgh.pa.us>
From: Tom Lane <tgl@sss.pgh.pa.us>
Precedence: bulk
Sender: pgsql-hackers-owner@postgresql.org
Status: OR
Bruce Momjian <pgman@candle.pha.pa.us> writes:
> Oh, so it is the aggregate. What threw me off is that both parts of the
> WHERE clause are required to cause the failure,
Not necessarily; I think it's got more to do with a null aggregate
result:
regression=# create table t1 (f1 datetime);
CREATE
regression=# create table t2 (f2 datetime);
CREATE
regression=# update t2 set f2 = min(f1) from t1;
ERROR: ExecutePlan: (junk) `ctid' is NULL!
regression=# insert into t1 values ('now');
INSERT 400577 1
regression=# update t2 set f2 = min(f1) from t1;
ERROR: ExecutePlan: (junk) `ctid' is NULL!
regression=# insert into t2 values ('now');
INSERT 400578 1
regression=# update t2 set f2 = min(f1) from t1;
UPDATE 1
regression=#
However the ERROR is only one symptom. The real problem is that the
calculation that's being done is useless/nonsensical.
> I don't see a problem with aggregates in UPDATE,
Think harder ... what is the aggregate being taken over, and how do you
associate the aggregate's single result row with any particular row in
the UPDATE's target table?
regards, tom lane
---------------------------(end of broadcast)---------------------------
TIP 3: if posting/reading through Usenet, please send an appropriate
subscribe-nomail command to majordomo@postgresql.org so that your
message can get through to the mailing list cleanly
From pgsql-hackers-owner+M15884=candle.pha.pa.us=pgman@postgresql.org Mon Nov 26 19:49:23 2001
Return-path: <pgsql-hackers-owner+M15884=candle.pha.pa.us=pgman@postgresql.org>
Received: from rs.postgresql.org (server1.pgsql.org [64.39.15.238] (may be forged))
by candle.pha.pa.us (8.11.6/8.10.1) with ESMTP id fAR0nNf14894
for <pgman@candle.pha.pa.us>; Mon, 26 Nov 2001 19:49:23 -0500 (EST)
Received: from postgresql.org (postgresql.org [64.49.215.8])
by rs.postgresql.org (8.11.6/8.11.6) with ESMTP id fAR0ijR50260
for <pgman@candle.pha.pa.us>; Mon, 26 Nov 2001 18:47:51 -0600 (CST)
(envelope-from pgsql-hackers-owner+M15884=candle.pha.pa.us=pgman@postgresql.org)
Received: from candle.pha.pa.us (candle.navpoint.com [162.33.245.46])
by postgresql.org (8.11.3/8.11.4) with ESMTP id fAR0dCm40733
for <pgsql-hackers@postgresql.org>; Mon, 26 Nov 2001 19:39:12 -0500 (EST)
(envelope-from pgman@candle.pha.pa.us)
Received: (from pgman@localhost)
by candle.pha.pa.us (8.11.6/8.10.1) id fAR0d6d13929;
Mon, 26 Nov 2001 19:39:06 -0500 (EST)
From: Bruce Momjian <pgman@candle.pha.pa.us>
Message-ID: <200111270039.fAR0d6d13929@candle.pha.pa.us>
Subject: Re: [HACKERS] Minor buglet in update...from (I think)
In-Reply-To: <16309.1006820911@sss.pgh.pa.us> "from Tom Lane at Nov 26, 2001
07:28:31 pm"
To: Tom Lane <tgl@sss.pgh.pa.us>
Date: Mon, 26 Nov 2001 19:39:06 -0500 (EST)
cc: Philip Warner <pjw@rhyme.com.au>, pgsql-hackers@postgresql.org
X-Mailer: ELM [version 2.4ME+ PL90 (25)]
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=US-ASCII
Precedence: bulk
Sender: pgsql-hackers-owner@postgresql.org
Status: OR
> Bruce Momjian <pgman@candle.pha.pa.us> writes:
> > Oh, so it is the aggregate. What threw me off is that both parts of the
> > WHERE clause are required to cause the failure,
>
> Not necessarily; I think it's got more to do with a null aggregate
> result:
>
> regression=# create table t1 (f1 datetime);
> CREATE
> regression=# create table t2 (f2 datetime);
> CREATE
> regression=# update t2 set f2 = min(f1) from t1;
> ERROR: ExecutePlan: (junk) `ctid' is NULL!
> regression=# insert into t1 values ('now');
> INSERT 400577 1
> regression=# update t2 set f2 = min(f1) from t1;
> ERROR: ExecutePlan: (junk) `ctid' is NULL!
> regression=# insert into t2 values ('now');
> INSERT 400578 1
> regression=# update t2 set f2 = min(f1) from t1;
> UPDATE 1
> regression=#
>
> However the ERROR is only one symptom. The real problem is that the
> calculation that's being done is useless/nonsensical.
>
> > I don't see a problem with aggregates in UPDATE,
>
> Think harder ... what is the aggregate being taken over, and how do you
> associate the aggregate's single result row with any particular row in
> the UPDATE's target table?
I thought the aggregate would be generated on all rows in the table in
the pre-transaction version of the table, so in this example:
regression=# update t2 set f2 = min(f1) from t1;
It places the minimum value of t1.f1 in all t2.f2 rows. Is there
another way to look at it?
--
Bruce Momjian | http://candle.pha.pa.us
pgman@candle.pha.pa.us | (610) 853-3000
+ If your life is a hard drive, | 830 Blythe Avenue
+ Christ can be your backup. | Drexel Hill, Pennsylvania 19026
---------------------------(end of broadcast)---------------------------
TIP 3: if posting/reading through Usenet, please send an appropriate
subscribe-nomail command to majordomo@postgresql.org so that your
message can get through to the mailing list cleanly
From tgl@sss.pgh.pa.us Mon Nov 26 19:51:12 2001
Return-path: <tgl@sss.pgh.pa.us>
Received: from sss.pgh.pa.us (root@[192.204.191.242])
by candle.pha.pa.us (8.11.6/8.10.1) with ESMTP id fAR0pCf14964
for <pgman@candle.pha.pa.us>; Mon, 26 Nov 2001 19:51:12 -0500 (EST)
Received: from sss2.sss.pgh.pa.us (tgl@localhost [127.0.0.1])
by sss.pgh.pa.us (8.11.4/8.11.4) with ESMTP id fAR0pDk16384;
Mon, 26 Nov 2001 19:51:13 -0500 (EST)
To: Bruce Momjian <pgman@candle.pha.pa.us>
cc: Philip Warner <pjw@rhyme.com.au>, pgsql-hackers@postgresql.org
Subject: Re: [HACKERS] Minor buglet in update...from (I think)
In-Reply-To: <200111270039.fAR0d6d13929@candle.pha.pa.us>
References: <200111270039.fAR0d6d13929@candle.pha.pa.us>
Comments: In-reply-to Bruce Momjian <pgman@candle.pha.pa.us>
message dated "Mon, 26 Nov 2001 19:39:06 -0500"
Date: Mon, 26 Nov 2001 19:51:13 -0500
Message-ID: <16381.1006822273@sss.pgh.pa.us>
From: Tom Lane <tgl@sss.pgh.pa.us>
Status: ORr
Bruce Momjian <pgman@candle.pha.pa.us> writes:
> I thought the aggregate would be generated on all rows in the table in
> the pre-transaction version of the table, so in this example:
> regression=# update t2 set f2 = min(f1) from t1;
> It places the minimum value of t1.f1 in all t2.f2 rows.
This actually is not the most interesting example, because the aggregate
doesn't depend at all on t2. Try this instead:
regression=# create table t1(f1 int);
CREATE
regression=# create table t2(f1 int);
CREATE
regression=# insert into t1 values(-1);
INSERT 400599 1
regression=# insert into t1 values(-2);
INSERT 400600 1
regression=# insert into t1 values(-3);
INSERT 400601 1
regression=# insert into t2 values(-1);
INSERT 400602 1
regression=# insert into t2 values(-2);
INSERT 400603 1
regression=# insert into t2 values(-3);
INSERT 400604 1
regression=# update t2 set f1 = count(*) from t1;
UPDATE 1
regression=# select * from t2;
f1
----
-2
-3
9
(3 rows)
regression=#
This is certainly broken, but what's the correct behavior?
Or how about this, which doesn't even use an aggregate:
regression=# update t2 set f1 = t1.f1 from t1;
UPDATE 3
regression=# select * from t2;
f1
----
-1
-1
-1
(3 rows)
regression=#
That's surprising too, perhaps, but what would you have expected
and why?
There's a reason why SQL99 forbids joins and aggregates in UPDATE ...
they're not always well-defined.
I had a proposal (GROUP BY ctid) in the older thread for fixing the
aggregate misbehavior, but it doesn't solve the more general problem
of a join that produces multiple matches for the same target row.
Seems like that probably ought to draw an error.
regards, tom lane
From pgsql-hackers-owner+M15885=candle.pha.pa.us=pgman@postgresql.org Mon Nov 26 20:10:34 2001
Return-path: <pgsql-hackers-owner+M15885=candle.pha.pa.us=pgman@postgresql.org>
Received: from rs.postgresql.org (server1.pgsql.org [64.39.15.238] (may be forged))
by candle.pha.pa.us (8.11.6/8.10.1) with ESMTP id fAR1AXf16581
for <pgman@candle.pha.pa.us>; Mon, 26 Nov 2001 20:10:33 -0500 (EST)
Received: from postgresql.org (postgresql.org [64.49.215.8])
by rs.postgresql.org (8.11.6/8.11.6) with ESMTP id fAR12nR50907
for <pgman@candle.pha.pa.us>; Mon, 26 Nov 2001 19:06:09 -0600 (CST)
(envelope-from pgsql-hackers-owner+M15885=candle.pha.pa.us=pgman@postgresql.org)
Received: from candle.pha.pa.us (candle.navpoint.com [162.33.245.46])
by postgresql.org (8.11.3/8.11.4) with ESMTP id fAR0wHm41320
for <pgsql-hackers@postgresql.org>; Mon, 26 Nov 2001 19:58:17 -0500 (EST)
(envelope-from pgman@candle.pha.pa.us)
Received: (from pgman@localhost)
by candle.pha.pa.us (8.11.6/8.10.1) id fAR0w6c15346;
Mon, 26 Nov 2001 19:58:06 -0500 (EST)
From: Bruce Momjian <pgman@candle.pha.pa.us>
Message-ID: <200111270058.fAR0w6c15346@candle.pha.pa.us>
Subject: Re: [HACKERS] Minor buglet in update...from (I think)
In-Reply-To: <16381.1006822273@sss.pgh.pa.us> "from Tom Lane at Nov 26, 2001
07:51:13 pm"
To: Tom Lane <tgl@sss.pgh.pa.us>
Date: Mon, 26 Nov 2001 19:58:06 -0500 (EST)
cc: Philip Warner <pjw@rhyme.com.au>, pgsql-hackers@postgresql.org
X-Mailer: ELM [version 2.4ME+ PL90 (25)]
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=US-ASCII
Precedence: bulk
Sender: pgsql-hackers-owner@postgresql.org
Status: OR
> Bruce Momjian <pgman@candle.pha.pa.us> writes:
> > I thought the aggregate would be generated on all rows in the table in
> > the pre-transaction version of the table, so in this example:
> > regression=# update t2 set f2 = min(f1) from t1;
> > It places the minimum value of t1.f1 in all t2.f2 rows.
>
> This actually is not the most interesting example, because the aggregate
> doesn't depend at all on t2. Try this instead:
>
> regression=# create table t1(f1 int);
> CREATE
> regression=# create table t2(f1 int);
> CREATE
> regression=# insert into t1 values(-1);
> INSERT 400599 1
> regression=# insert into t1 values(-2);
> INSERT 400600 1
> regression=# insert into t1 values(-3);
> INSERT 400601 1
> regression=# insert into t2 values(-1);
> INSERT 400602 1
> regression=# insert into t2 values(-2);
> INSERT 400603 1
> regression=# insert into t2 values(-3);
> INSERT 400604 1
> regression=# update t2 set f1 = count(*) from t1;
> UPDATE 1
> regression=# select * from t2;
> f1
> ----
> -2
> -3
> 9
> (3 rows)
>
> regression=#
>
> This is certainly broken, but what's the correct behavior?
Shouldn't it be 9 because there is no join of t1 and t2?
I can also see 3 as a valid answer.
> Or how about this, which doesn't even use an aggregate:
>
> regression=# update t2 set f1 = t1.f1 from t1;
> UPDATE 3
> regression=# select * from t2;
> f1
> ----
> -1
> -1
> -1
> (3 rows)
>
> regression=#
>
> That's surprising too, perhaps, but what would you have expected
> and why?
So it grabs the first match. Seems reasonable because t1 returns more
than one row.
>
> There's a reason why SQL99 forbids joins and aggregates in UPDATE ...
> they're not always well-defined.
Yes, I see that now.
> I had a proposal (GROUP BY ctid) in the older thread for fixing the
> aggregate misbehavior, but it doesn't solve the more general problem
> of a join that produces multiple matches for the same target row.
> Seems like that probably ought to draw an error.
Or a NOTICE stating a random row was chosen.
--
Bruce Momjian | http://candle.pha.pa.us
pgman@candle.pha.pa.us | (610) 853-3000
+ If your life is a hard drive, | 830 Blythe Avenue
+ Christ can be your backup. | Drexel Hill, Pennsylvania 19026
---------------------------(end of broadcast)---------------------------
TIP 1: subscribe and unsubscribe commands go to majordomo@postgresql.org
From pgsql-hackers-owner+M4046@hub.org Fri Jun 30 08:55:30 2000
Received: from hub.org (root@hub.org [216.126.84.1])
by candle.pha.pa.us (8.9.0/8.9.0) with ESMTP id HAA17845
for <pgman@candle.pha.pa.us>; Fri, 30 Jun 2000 07:55:30 -0400 (EDT)
Received: from hub.org (majordom@localhost [127.0.0.1])
by hub.org (8.10.1/8.10.1) with SMTP id e5UBuOu21797;
Fri, 30 Jun 2000 07:56:24 -0400 (EDT)
Received: from acheron.rime.com.au (root@albatr.lnk.telstra.net [139.130.54.222])
by hub.org (8.10.1/8.10.1) with ESMTP id e5UBtgu21623
for <pgsql-hackers@postgresql.org>; Fri, 30 Jun 2000 07:55:44 -0400 (EDT)
Received: from oberon (Oberon.rime.com.au [203.8.195.100])
by acheron.rime.com.au (8.9.3/8.9.3) with SMTP id VAA27179
for <pgsql-hackers@postgresql.org>; Fri, 30 Jun 2000 21:50:24 +1000
Message-ID: <3.0.5.32.20000630215746.03221df0@mail.rhyme.com.au>
X-Sender: pjw@mail.rhyme.com.au
X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32)
Date: Fri, 30 Jun 2000 21:57:46 +1000
To: pgsql-hackers@postgresql.org
From: Philip Warner <pjw@rhyme.com.au>
Subject: [HACKERS] Minor buglet in update...from (I think)
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
X-Mailing-List: pgsql-hackers@postgresql.org
Precedence: bulk
Sender: pgsql-hackers-owner@hub.org
Status: ORr
A minor nasty error I got when trying to improve the query used to disable
triggers:
create table t1(f1 int4, f2 int4);
create table t2(f1 int4, f2 int4);
insert into t1 values(1, 0);
insert into t1 values(2, 0);
insert into t2 values(1, 0);
update t1 set f2=count(*) from t2 where t1.f1=1 and t2.f1=t1.f1 ;
UPDATE 1
update t1 set f2=count(*) from t2 where t1.f1=2 and t2.f1=t1.f1 ;
ERROR: ExecutePlan: (junk) `ctid' is NULL!
I would have expected no update to occur since no rows match.
----------------------------------------------------------------
Philip Warner | __---_____
Albatross Consulting Pty. Ltd. |----/ - \
(A.C.N. 008 659 498) | /(@) ______---_
Tel: (+61) 0500 83 82 81 | _________ \
Fax: (+61) 0500 83 82 82 | ___________ |
Http://www.rhyme.com.au | / \|
| --________--
PGP key available upon request, | /
and from pgp5.ai.mit.edu:11371 |/
Reference in New Issue View Git Blame Copy Permalink