postgresql/INSTALL

     Installation instructions for PostgreSQL 7.0.

If you haven't gotten the PostgreSQL distribution, get it from
ftp.postgresql.org, then unpack it:

gunzip postgresql-7.0.tar.gz
tar -xf postgresql-7.0.tar
mv postgresql-7.0 /usr/src

Before you start

Building PostgreSQL requires GNU make. It will not work with other make
programs. On GNU/Linux systems GNU make is the default tool, on other
systems you may find that GNU make is installed under the name "gmake". We
will use that name from now on to indicate GNU make, no matter what name it
has on your system. To test for GNU make enter

gmake --version

If you need to get GNU make, you can find it at ftp://ftp.gnu.org.

Up to date information on supported platforms is at
http://www.postgresql.org/docs/admin/ports.htm. In general, most
Unix-compatible platforms with modern libraries should be able to run
PostgreSQL. In the doc subdirectory of the distribution are several
platform-specific FAQ and README documents you might wish to consult if you
are having trouble.

Although the minimum required memory for running PostgreSQL can be as little
as 8MB, there are noticable speed improvements when expanding memory up to
96MB or beyond. The rule is you can never have too much memory.

Check that you have sufficient disk space. You will need about 30 Mbytes for
the source tree during compilation and about 5 Mbytes for the installation
directory. An empty database takes about 1 Mbyte, otherwise they take about
five times the amount of space that a flat text file with the same data
would take. If you run the regression tests you will temporarily need an
extra 20MB.

To check for disk space, use

df -k

Considering today's prices for hard disks, getting a large and fast hard
disk should probably be in your plans before putting a database into
production use.


Installation Procedure

PostgreSQL Installation

For a fresh install or upgrading from previous releases of PostgreSQL:

  1. Create the PostgreSQL superuser account. This is the user the server
     will run as. For production use you should create a separate,
     unprivileged account (postgres is commonly used). If you do not have
     root access or just want to play around, your own user account is
     enough.

     Running PostgreSQL as root, bin, or any other account with special
     access rights is a security risk and therefore won't be allowed.

     You need not do the building and installation itself under this account
     (although you can). You will be told when you need to login as the
     database superuser.

  2. If you are not upgrading an existing system then skip to step 4.

     You now need to back up your existing database. To dump your fairly
     recent post-6.0 database installation, type

     pg_dumpall > db.out

     If you wish to preserve object id's (oids), then use the -o option when
     running pg_dumpall. However, unless you have a special reason for doing
     this (such as using OIDs as keys in tables), don't do it.

     Make sure to use the pg_dumpall command from the version you are
     currently running. However, do not use the pg_dumpall script from 6.0
     or everything will be owned by the PostgreSQL super user. In that case
     you should grab pg_dumpall from a later 6.x.x release. 7.0's pg_dumpall
     will not work on older databases. If you are upgrading from a version
     prior to Postgres95 v1.09 then you must back up your database, install
     Postgres95 v1.09, restore your database, then back it up again.

                                        Caution
      You must make sure that your database is not updated in the middle of your
      backup. If necessary, bring down postmaster, edit the permissions in file
      /usr/local/pgsql/data/pg_hba.conf to allow only you on, then bring
      postmaster back up.
  3. If you are upgrading an existing system then kill the database server
     now. Type

     ps ax | grep postmaster

     or

     ps -e | grep postmaster

     (It depends on your system which one of these two works. No harm can be
     done by typing the wrong one.) This should list the process numbers for
     a number of processes, similar to this:

       263  ?  SW   0:00 (postmaster)
       777  p1 S    0:00 grep postmaster

     Type the following line, with pid replaced by the process id for
     process postmaster (263 in the above case). (Do not use the id for the
     process "grep postmaster".)

     kill pid

          Tip: On systems which have PostgreSQL started at boot time,
          there is probably a startup file which will accomplish the
          same thing. For example, on a Redhat Linux system one might
          find that

          /etc/rc.d/init.d/postgres.init stop

          works.

     Also move the old directories out of the way. Type the following:

     mv /usr/local/pgsql /usr/local/pgsql.old

     or replace your particular paths.

  4. Configure the source code for your system. It is this step at which you
     can specify your actual installation path for the build process and
     make choices about what gets installed. Change into the src
     subdirectory and type:

     ./configure

     followed by any options you might want to give it. For a first
     installation you should be able to do fine without any. For a complete
     list of options, type:

     ./configure --help

     Some of the more commonly used ones are:

     --prefix=BASEDIR

          Selects a different base directory for the installation of
          PostgreSQL. The default is /usr/local/pgsql.

     --enable-locale

          If you want to use locales.

     --enable-multibyte

          Allows the use of multibyte character encodings. This is primarily
          for languages like Japanese, Korean, or Chinese.

     --with-perl

          Builds the Perl interface. Please note that the Perl interface
          will be installed into the usual place for Perl modules (typically
          under /usr/lib/perl), so you must have root access to use this
          option successfully.

     --with-odbc

          Builds the ODBC driver package.

     --with-tcl

          Builds interface libraries and programs requiring Tcl/Tk,
          including libpgtcl, pgtclsh, and pgtksh.

  5. Compile the program. Type

     gmake

     The compilation process can take anywhere from 10 minutes to an hour.
     Your milage will most certainly vary. Remember to use GNU make.

     The last line displayed will hopefully be

     All of PostgreSQL is successfully made. Ready to install.

  6. Install the program. Type

     gmake install

  7. Tell your system how to find the new shared libraries. How to do this
     varies between platforms. What tends to work everywhere is to set the
     environment variable LD_LIBRARY_PATH:

     LD_LIBRARY_PATH=/usr/local/pgsql/lib
     export LD_LIBRARY_PATH

     on sh, ksh, bash, zsh or

     setenv LD_LIBRARY_PATH /usr/local/pgsql/lib

     on csh or tcsh. You might want to put this into a shell startup file
     such as /etc/profile.

     On some systems the following is the preferred method, but you must
     have root access. Edit file /etc/ld.so.conf to add a line

     /usr/local/pgsql/lib

     Then run command /sbin/ldconfig.

     If in doubt, refer to the manual pages of your system. If you later on
     get a message like

     psql: error in loading shared libraries
     libpq.so.2.1: cannot open shared object file: No such file or directory

     then the above was necessary. Simply do this step then.

  8. Create the database installation. To do this you must log in to your
     PostgreSQL superuser account. It will not work as root.

     mkdir /usr/local/pgsql/data
     chown postgres /usr/local/pgsql/data
     su - postgres
     /usr/local/pgsql/initdb -D /usr/local/pgsql/data

     The -D option specifies the location where the data will be stored. You
     can use any path you want, it does not have to be under the
     installation directory. Just make sure that the superuser account can
     write to the directory (or create it) before starting initdb. (If you
     have already been doing the installation up to now as the PostgreSQL
     superuser, you may have to log in as root temporarily to create the
     data directory.)

  9. The previous step should have told you how to start up the database
     server. Do so now.

     /usr/local/pgsql/bin/postmaster -D /usr/local/pgsql/data

     This will start the server in the foreground. To make it detach to the
     background, use the -S.

 10. If you are upgrading from an existing installation, dump your data back
     in:

     /usr/local/pgsql/bin/psql -d template1 -f db.out

     You also might want to copy over the old pg_hba.conf file and any other
     files you might have had set up for authentication, such as password
     files.

This concludes the installation proper. To make your life more productive
and enjoyable you should look at the following optional steps and
suggestions.

   * Life will be more convenient if you set up some enviroment variables.
     First of all you probably want to include /usr/local/pgsql/bin (or
     equivalent) into your PATH. To do this, add the following to your shell
     startup file, such as ~/.bash_profile (or /etc/profile, if you want it
     to affect every user):

     PATH=$PATH:/usr/local/pgsql/bin

     Furthermore, if you set PGDATA in the environment of the PostgreSQL
     superuser, you can omit the -D for postmaster and initdb.

   * You probably want to install the man and HTML documentation. Type

     cd /usr/src/pgsql/postgresql-7.0/doc
     gmake install

     This will install files under /usr/local/pgsql/doc and
     /usr/local/pgsql/man. To enable your system to find the man
     documentation, you need to add a line like the following to a shell
     startup file:

     MANPATH=$MANPATH:/usr/local/pgsql/man

     The documentation is also available in Postscript format. If you have a
     Postscript printer, or have your machine already set up to accept
     Postscript files using a print filter, then to print the User's Guide
     simply type

     cd /usr/local/pgsql/doc
     gunzip -c user.ps.tz | lpr

     Here is how you might do it if you have Ghostscript on your system and
     are writing to a laserjet printer.

     gunzip -c user.ps.gz | gs -sDEVICE=laserjet -r300 -q -dNOPAUSE -sOutputFile=- | lpr

     Printer setups can vary wildly from system to system. If in doubt,
     consult your manuals or your local expert.

     The Adminstrator's Guide should probably be your first reading if you
     are completely new to PostgreSQL, as it contains information about how
     to set up database users and authentication.

   * Usually, you will want to modify your computer so that it will
     automatically start the database server whenever it boots. This is not
     required; the PostgreSQL server can be run successfully from
     non-privileged accounts without root intervention.

     Different systems have different conventions for starting up daemons at
     boot time, so you are advised to familiarize yourself with them. Most
     systems have a file /etc/rc.local or /etc/rc.d/rc.local which is almost
     certainly no bad place to put such a command. Whatever you do,
     postmaster must be run by the PostgreSQL superuser (postgres) and not
     by root or any other user. Therefore you probably always want to form
     your command lines along the lines of su -c '...' postgres.

     It might be advisable to keep a log of the server output. To start the
     server that way try:

     nohup su -c 'postmaster -D /usr/local/pgsql/data > server.log 2>&1' postgres &

     Here are a few more operating system specific suggestions.

        o Edit file rc.local on NetBSD or file rc2.d on SPARC Solaris 2.5.1
          to contain the following single line:

          su postgres -c "/usr/local/pgsql/bin/postmaster -S -D /usr/local/pgsql/data"

        o In FreeBSD 2.2-RELEASE edit /usr/local/etc/rc.d/pgsql.sh to
          contain the following lines and make it chmod 755 and chown
          root:bin.

          #!/bin/sh
          [ -x /usr/local/pgsql/bin/postmaster ] && {
              su -l pgsql -c 'exec /usr/local/pgsql/bin/postmaster
                  -D/usr/local/pgsql/data
                  -S -o -F > /usr/local/pgsql/errlog' &
              echo -n ' pgsql'
          }

          You may put the line breaks as shown above. The shell is smart
          enough to keep parsing beyond end-of-line if there is an
          expression unfinished. The exec saves one layer of shell under the
          postmaster process so the parent is init.

        o In RedHat Linux add a file /etc/rc.d/init.d/postgres.init which is
          based on the example in contrib/linux/. Then make a softlink to
          this file from /etc/rc.d/rc5.d/S98postgres.init.

   * Run the regression tests. The regression tests are a test suite to
     verify that PostgreSQL runs on your machine in the way the developers
     expected it to. You should definitely do this before putting a server
     into production use. The file
     /usr/src/pgsql/postgresql-7.0/src/test/regress/README has detailed
     instructions for running and interpreting the regression tests.

To start "playing around", set up the paths as explained above and start the
server. To create a database, type

createdb testdb

Then enter

psql testdb

to connect to that database. At the prompt you can enter SQL and start
experimenting.