mirror/postgresql
2
0
Fork 0
mirror of https://git.postgresql.org/git/postgresql.git synced 2024-12-27 08:39:28 +08:00
Code Issues Packages Projects Releases Wiki Activity
4b06f6f9c8
postgresql/doc/TODO.detail/optimizer
Bruce Momjian 79434a3d54 Update TODO list.
1999-09-21 21:17:42 +00:00

988 lines
42 KiB
Plaintext
Raw Blame History

From owner-pgsql-hackers@hub.org Mon Mar 22 18:43:41 1999
Received: from renoir.op.net (root@renoir.op.net [209.152.193.4])
by candle.pha.pa.us (8.9.0/8.9.0) with ESMTP id SAA23978
for <maillist@candle.pha.pa.us>; Mon, 22 Mar 1999 18:43:39 -0500 (EST)
Received: from hub.org (majordom@hub.org [209.47.145.100]) by renoir.op.net (o1/$Revision: 1.6 $) with ESMTP id SAA06472 for <maillist@candle.pha.pa.us>; Mon, 22 Mar 1999 18:36:44 -0500 (EST)
Received: from localhost (majordom@localhost)
by hub.org (8.9.2/8.9.1) with SMTP id SAA92604;
Mon, 22 Mar 1999 18:34:23 -0500 (EST)
(envelope-from owner-pgsql-hackers@hub.org)
Received: by hub.org (TLB v0.10a (1.23 tibbs 1997/01/09 00:29:32)); Mon, 22 Mar 1999 18:33:50 +0000 (EST)
Received: (from majordom@localhost)
by hub.org (8.9.2/8.9.1) id SAA92469
for pgsql-hackers-outgoing; Mon, 22 Mar 1999 18:33:47 -0500 (EST)
(envelope-from owner-pgsql-hackers@postgreSQL.org)
Received: from po8.andrew.cmu.edu (PO8.ANDREW.CMU.EDU [128.2.10.108])
by hub.org (8.9.2/8.9.1) with ESMTP id SAA92456
for <pgsql-hackers@postgresql.org>; Mon, 22 Mar 1999 18:33:41 -0500 (EST)
(envelope-from er1p+@andrew.cmu.edu)
Received: (from postman@localhost) by po8.andrew.cmu.edu (8.8.5/8.8.2) id SAA12894 for pgsql-hackers@postgresql.org; Mon, 22 Mar 1999 18:33:38 -0500 (EST)
Received: via switchmail; Mon, 22 Mar 1999 18:33:38 -0500 (EST)
Received: from cloudy.me.cmu.edu via qmail
ID </afs/andrew.cmu.edu/service/mailqs/q007/QF.Aqxh7Lu00gNtQ0TZE5>;
Mon, 22 Mar 1999 18:27:20 -0500 (EST)
Received: from cloudy.me.cmu.edu via qmail
ID </afs/andrew.cmu.edu/usr2/er1p/.Outgoing/QF.Uqxh7JS00gNtMmTJFk>;
Mon, 22 Mar 1999 18:27:17 -0500 (EST)
Received: from mms.4.60.Jun.27.1996.03.05.56.sun4.41.EzMail.2.0.CUILIB.3.45.SNAP.NOT.LINKED.cloudy.me.cmu.edu.sun4m.412
via MS.5.6.cloudy.me.cmu.edu.sun4_41;
Mon, 22 Mar 1999 18:27:15 -0500 (EST)
Message-ID: <sqxh7H_00gNtAmTJ5Q@andrew.cmu.edu>
Date: Mon, 22 Mar 1999 18:27:15 -0500 (EST)
From: Erik Riedel <riedel+@CMU.EDU>
To: pgsql-hackers@postgreSQL.org
Subject: [HACKERS] optimizer and type question
Sender: owner-pgsql-hackers@postgreSQL.org
Precedence: bulk
Status: RO
[last week aggregation, this week, the optimizer]
I have a somewhat general optimizer question/problem that I would like
to get some input on - i.e. I'd like to know what is "supposed" to
work here and what I should be expecting. Sadly, I think the patch
for this is more involved than my last message.
Using my favorite table these days:
Table = lineitem
+------------------------+----------------------------------+-------+
| Field | Type | Length|
+------------------------+----------------------------------+-------+
| l_orderkey | int4 not null | 4 |
| l_partkey | int4 not null | 4 |
| l_suppkey | int4 not null | 4 |
| l_linenumber | int4 not null | 4 |
| l_quantity | float4 not null | 4 |
| l_extendedprice | float4 not null | 4 |
| l_discount | float4 not null | 4 |
| l_tax | float4 not null | 4 |
| l_returnflag | char() not null | 1 |
| l_linestatus | char() not null | 1 |
| l_shipdate | date | 4 |
| l_commitdate | date | 4 |
| l_receiptdate | date | 4 |
| l_shipinstruct | char() not null | 25 |
| l_shipmode | char() not null | 10 |
| l_comment | char() not null | 44 |
+------------------------+----------------------------------+-------+
Index: lineitem_index_
and the query:
--
-- Query 1
--
explain select l_returnflag, l_linestatus, sum(l_quantity) as sum_qty,
sum(l_extendedprice) as sum_base_price,
sum(l_extendedprice*(1-l_discount)) as sum_disc_price,
sum(l_extendedprice*(1-l_discount)*(1+l_tax)) as sum_charge,
avg(l_quantity) as avg_qty, avg(l_extendedprice) as avg_price,
avg(l_discount) as avg_disc, count(*) as count_order
from lineitem
where l_shipdate <= '1998-09-02'::date
group by l_returnflag, l_linestatus
order by l_returnflag, l_linestatus;
note that I have eliminated the date calculation in my query of last
week and manually replaced it with a constant (since this wasn't
happening automatically - but let's not worry about that for now).
And this is only an explain, we care about the optimizer. So we get:
Sort (cost=34467.88 size=0 width=0)
-> Aggregate (cost=34467.88 size=0 width=0)
-> Group (cost=34467.88 size=0 width=0)
-> Sort (cost=34467.88 size=0 width=0)
-> Seq Scan on lineitem (cost=34467.88 size=200191 width=44)
so let's think about the selectivity that is being chosen for the
seq scan (the where l_shipdate <= '1998-09-02').
Turns out the optimizer is choosing "33%", even though the real answer
is somewhere in 90+% (that's how the query is designed). So, why does
it do that?
Turns out that selectivity in this case is determined via
plancat::restriction_selectivity() which calls into functionOID = 103
(intltsel) for operatorOID = 1096 (date "<=") on relation OID = 18663
(my lineitem).
This all follows because of the description of 1096 (date "<=") in
pg_operator. Looking at local1_template1.bki.source near line 1754
shows:
insert OID = 1096 ( "<=" PGUID 0 <...> date_le intltsel intltjoinsel )
where we see that indeed, it thinks "intltsel" is the right function
to use for "oprrest" in the case of dates.
Question 1 - is intltsel the right thing for selectivity on dates?
Hope someone is still with me.
So now we're running selfuncs::intltsel() where we make a further call
to selfuncs::gethilokey(). The job of gethilokey is to determine the
min and max values of a particular attribute in the table, which will
then be used with the constant in my where clause to estimate the
selectivity. It is going to search the pg_statistic relation with
three key values:
Anum_pg_statistic_starelid 18663 (lineitem)
Anum_pg_statistic_staattnum 11 (l_shipdate)
Anum_pg_statistic_staop 1096 (date "<=")
this finds no tuples in pg_statistic. Why is that? The only nearby
tuple in pg_statistic is:
starelid|staattnum|staop|stalokey |stahikey
--------+---------+-----+----------------+----------------
18663| 11| 0|01-02-1992 |12-01-1998
and the reason the query doesn't match anything? Because 1096 != 0.
But why is it 0 in pg_statistic? Statistics are determined near line
1844 in vacuum.c (assuming a 'vacuum analyze' run at some point)
i = 0;
values[i++] = (Datum) relid; /* 1 */
values[i++] = (Datum) attp->attnum; /* 2 */
====> values[i++] = (Datum) InvalidOid; /* 3 */
fmgr_info(stats->outfunc, &out_function);
out_string = <...min...>
values[i++] = (Datum) fmgr(F_TEXTIN, out_string);
pfree(out_string);
out_string = <...max...>
values[i++] = (Datum) fmgr(F_TEXTIN, out_string);
pfree(out_string);
stup = heap_formtuple(sd->rd_att, values, nulls);
the "offending" line is setting the staop to InvalidOid (i.e. 0).
Question 2 - is this right? Is the intent for 0 to serve as a
"wildcard", or should it be inserting an entry for each operation
individually?
In the case of "wildcard" then gethilokey() should allow a match for
Anum_pg_statistic_staop 0
instead of requiring the more restrictive 1096. In the current code,
what happens next is gethilokey() returns "not found" and intltsel()
returns the default 1/3 which I see in the resultant query plan (size
= 200191 is 1/3 of the number of lineitem tuples).
Question 3 - is there any inherent reason it couldn't get this right?
The statistic is in the table 1992 to 1998, so the '1998-09-02' date
should be 90-some% selectivity, a much better guess than 33%.
Doesn't make a difference for this particular query, of course,
because the seq scan must proceed anyhow, but it could easily affect
other queries where selectivities matter (and it affects the
modifications I am trying to test in the optimizer to be "smarter"
about selectivities - my overall context is to understand/improve the
behavior that the underlying storage system sees from queries like this).
OK, so let's say we treat 0 as a "wildcard" and stop checking for
1096. Not we let gethilokey() return the two dates from the statistic
table. The immediate next thing that intltsel() does, near lines 122
in selfuncs.c is call atol() on the strings from gethilokey(). And
guess what it comes up with?
low = 1
high = 12
because it calls atol() on '01-02-1992' and '12-01-1998'. This
clearly isn't right, it should get some large integer that includes
the year and day in the result. Then it should compare reasonably
with my constant from the where clause and give a decent selectivity
value. This leads to a re-visit of Question 1.
Question 4 - should date "<=" use a dateltsel() function instead of
intltsel() as oprrest?
If anyone is still with me, could you tell me if this makes sense, or
if there is some other location where the appropriate type conversion
could take place so that intltsel() gets something reasonable when it
does the atol() calls?
Could someone also give me a sense for how far out-of-whack the whole
current selectivity-handling structure is? It seems that most of the
operators in pg_operator actually use intltsel() and would have
type-specific problems like that described. Or is the problem in the
way attribute values are stored in pg_statistic by vacuum analyze? Or
is there another layer where type conversion belongs?
Phew. Enough typing, hope someone can follow this and address at
least some of the questions.
Thanks.
Erik Riedel
Carnegie Mellon University
www.cs.cmu.edu/~riedel
From owner-pgsql-hackers@hub.org Mon Mar 22 20:31:11 1999
Received: from renoir.op.net (root@renoir.op.net [209.152.193.4])
by candle.pha.pa.us (8.9.0/8.9.0) with ESMTP id UAA00802
for <maillist@candle.pha.pa.us>; Mon, 22 Mar 1999 20:31:09 -0500 (EST)
Received: from hub.org (majordom@hub.org [209.47.145.100]) by renoir.op.net (o1/$Revision: 1.6 $) with ESMTP id UAA13231 for <maillist@candle.pha.pa.us>; Mon, 22 Mar 1999 20:15:20 -0500 (EST)
Received: from localhost (majordom@localhost)
by hub.org (8.9.2/8.9.1) with SMTP id UAA01981;
Mon, 22 Mar 1999 20:14:04 -0500 (EST)
(envelope-from owner-pgsql-hackers@hub.org)
Received: by hub.org (TLB v0.10a (1.23 tibbs 1997/01/09 00:29:32)); Mon, 22 Mar 1999 20:13:32 +0000 (EST)
Received: (from majordom@localhost)
by hub.org (8.9.2/8.9.1) id UAA01835
for pgsql-hackers-outgoing; Mon, 22 Mar 1999 20:13:28 -0500 (EST)
(envelope-from owner-pgsql-hackers@postgreSQL.org)
Received: from sss.sss.pgh.pa.us (sss.pgh.pa.us [206.210.65.6])
by hub.org (8.9.2/8.9.1) with ESMTP id UAA01822
for <pgsql-hackers@postgreSQL.org>; Mon, 22 Mar 1999 20:13:21 -0500 (EST)
(envelope-from tgl@sss.pgh.pa.us)
Received: from sss.sss.pgh.pa.us (localhost [127.0.0.1])
by sss.sss.pgh.pa.us (8.9.1/8.9.1) with ESMTP id UAA23294;
Mon, 22 Mar 1999 20:12:43 -0500 (EST)
To: Erik Riedel <riedel+@CMU.EDU>
cc: pgsql-hackers@postgreSQL.org
Subject: Re: [HACKERS] optimizer and type question
In-reply-to: Your message of Mon, 22 Mar 1999 18:27:15 -0500 (EST)
<sqxh7H_00gNtAmTJ5Q@andrew.cmu.edu>
Date: Mon, 22 Mar 1999 20:12:43 -0500
Message-ID: <23292.922151563@sss.pgh.pa.us>
From: Tom Lane <tgl@sss.pgh.pa.us>
Sender: owner-pgsql-hackers@postgreSQL.org
Precedence: bulk
Status: ROr
Erik Riedel <riedel+@CMU.EDU> writes:
> [ optimizer doesn't find relevant pg_statistic entry ]
It's clearly a bug that the selectivity code is not finding this tuple.
If your analysis is correct, then selectivity estimation has *never*
worked properly, or at least not in recent memory :-(. Yipes.
Bruce and I found a bunch of other problems in the optimizer recently,
so it doesn't faze me to assume that this is broken too.
> the "offending" line is setting the staop to InvalidOid (i.e. 0).
> Question 2 - is this right? Is the intent for 0 to serve as a
> "wildcard",
My thought is that what the staop column ought to be is the OID of the
comparison function that was used to determine the sort order of the
column. Without a sort op the lowest and highest keys in the column are
not well defined, so it makes no sense to assert "these are the lowest
and highest values" without providing the sort op that determined that.
(For sufficiently complex data types one could reasonably have multiple
ordering operators. A crude example is sorting on "circumference" and
"area" for polygons.) But typically the sort op will be the "<"
operator for the column data type.
So, the vacuum code is definitely broken --- it's not storing the sort
op that it used. The code in gethilokey might be broken too, depending
on how it is producing the operator it's trying to match against the
tuple. For example, if the actual operator in the query is any of
< <= > >= on int4, then int4lt ought to be used to probe the pg_statistic
table. I'm not sure if we have adequate info in pg_operator or pg_type
to let the optimizer code determine the right thing to probe with :-(
> The immediate next thing that intltsel() does, near lines 122
> in selfuncs.c is call atol() on the strings from gethilokey(). And
> guess what it comes up with?
> low = 1
> high = 12
> because it calls atol() on '01-02-1992' and '12-01-1998'. This
> clearly isn't right, it should get some large integer that includes
> the year and day in the result. Then it should compare reasonably
> with my constant from the where clause and give a decent selectivity
> value. This leads to a re-visit of Question 1.
> Question 4 - should date "<=" use a dateltsel() function instead of
> intltsel() as oprrest?
This is clearly busted as well. I'm not sure that creating dateltsel()
is the right fix, however, because if you go down that path then every
single datatype needs its own selectivity function; that's more than we
need.
What we really want here is to be able to map datatype values into
some sort of numeric range so that we can compute what fraction of the
low-key-to-high-key range is on each side of the probe value (the
constant taken from the query). This general concept will apply to
many scalar types, so what we want is a type-specific mapping function
and a less-specific fraction-computing-function. Offhand I'd say that
we want intltsel() and floatltsel(), plus conversion routines that can
produce either int4 or float8 from a data type as seems appropriate.
Anything that couldn't map to one or the other would have to supply its
own selectivity function.
> Or is the problem in the
> way attribute values are stored in pg_statistic by vacuum analyze?
Looks like it converts the low and high values to text and stores them
that way. Ugly as can be :-( but I'm not sure there is a good
alternative. We have no "wild card" column type AFAIK, which is what
these columns of pg_statistic would have to be to allow storage of
unconverted min and max values.
I think you've found a can of worms here. Congratulations ;-)
regards, tom lane
From owner-pgsql-hackers@hub.org Mon Mar 22 23:31:00 1999
Received: from renoir.op.net (root@renoir.op.net [209.152.193.4])
by candle.pha.pa.us (8.9.0/8.9.0) with ESMTP id XAA03384
for <maillist@candle.pha.pa.us>; Mon, 22 Mar 1999 23:30:58 -0500 (EST)
Received: from hub.org (majordom@hub.org [209.47.145.100]) by renoir.op.net (o1/$Revision: 1.6 $) with ESMTP id XAA25586 for <maillist@candle.pha.pa.us>; Mon, 22 Mar 1999 23:18:25 -0500 (EST)
Received: from localhost (majordom@localhost)
by hub.org (8.9.2/8.9.1) with SMTP id XAA17955;
Mon, 22 Mar 1999 23:17:24 -0500 (EST)
(envelope-from owner-pgsql-hackers@hub.org)
Received: by hub.org (TLB v0.10a (1.23 tibbs 1997/01/09 00:29:32)); Mon, 22 Mar 1999 23:16:49 +0000 (EST)
Received: (from majordom@localhost)
by hub.org (8.9.2/8.9.1) id XAA17764
for pgsql-hackers-outgoing; Mon, 22 Mar 1999 23:16:46 -0500 (EST)
(envelope-from owner-pgsql-hackers@postgreSQL.org)
Received: from po8.andrew.cmu.edu (PO8.ANDREW.CMU.EDU [128.2.10.108])
by hub.org (8.9.2/8.9.1) with ESMTP id XAA17745
for <pgsql-hackers@postgreSQL.org>; Mon, 22 Mar 1999 23:16:39 -0500 (EST)
(envelope-from er1p+@andrew.cmu.edu)
Received: (from postman@localhost) by po8.andrew.cmu.edu (8.8.5/8.8.2) id XAA04273; Mon, 22 Mar 1999 23:16:37 -0500 (EST)
Received: via switchmail; Mon, 22 Mar 1999 23:16:37 -0500 (EST)
Received: from hazy.adsl.net.cmu.edu via qmail
ID </afs/andrew.cmu.edu/service/mailqs/q000/QF.kqxlJ:S00anI00p040>;
Mon, 22 Mar 1999 23:15:09 -0500 (EST)
Received: from hazy.adsl.net.cmu.edu via qmail
ID </afs/andrew.cmu.edu/usr2/er1p/.Outgoing/QF.MqxlJ3q00anI01hKE0>;
Mon, 22 Mar 1999 23:15:00 -0500 (EST)
Received: from mms.4.60.Jun.27.1996.03.02.53.sun4.51.EzMail.2.0.CUILIB.3.45.SNAP.NOT.LINKED.hazy.adsl.net.cmu.edu.sun4m.54
via MS.5.6.hazy.adsl.net.cmu.edu.sun4_51;
Mon, 22 Mar 1999 23:14:55 -0500 (EST)
Message-ID: <4qxlJ0200anI01hK40@andrew.cmu.edu>
Date: Mon, 22 Mar 1999 23:14:55 -0500 (EST)
From: Erik Riedel <riedel+@CMU.EDU>
To: Tom Lane <tgl@sss.pgh.pa.us>
Subject: Re: [HACKERS] optimizer and type question
Cc: pgsql-hackers@postgreSQL.org
In-Reply-To: <23292.922151563@sss.pgh.pa.us>
References: <23292.922151563@sss.pgh.pa.us>
Sender: owner-pgsql-hackers@postgreSQL.org
Precedence: bulk
Status: ROr
OK, building on your high-level explanation, I am attaching a patch that
attempts to do something "better" than the current code. Note that I
have only tested this with the date type and my particular query. I
haven't run it through the regression, so consider it "proof of concept"
at best. Although hopefully it will serve my purposes.
> My thought is that what the staop column ought to be is the OID of the
> comparison function that was used to determine the sort order of the
> column. Without a sort op the lowest and highest keys in the column are
> not well defined, so it makes no sense to assert "these are the lowest
> and highest values" without providing the sort op that determined that.
>
> (For sufficiently complex data types one could reasonably have multiple
> ordering operators. A crude example is sorting on "circumference" and
> "area" for polygons.) But typically the sort op will be the "<"
> operator for the column data type.
>
I changed vacuum.c to do exactly that. oid of the lt sort op.
> So, the vacuum code is definitely broken --- it's not storing the sort
> op that it used. The code in gethilokey might be broken too, depending
> on how it is producing the operator it's trying to match against the
> tuple. For example, if the actual operator in the query is any of
> < <= > >= on int4, then int4lt ought to be used to probe the pg_statistic
> table. I'm not sure if we have adequate info in pg_operator or pg_type
> to let the optimizer code determine the right thing to probe with :-(
>
This indeed seems like a bigger problem. I thought about somehow using
type-matching from the sort op and the actual operator in the query - if
both the left and right type match, then consider them the same for
purposes of this probe. That seemed complicated, so I punted in my
example - it just does the search with relid and attnum and assumes that
only returns one tuple. This works in my case (maybe in all cases,
because of the way vacuum is currently written - ?).
> What we really want here is to be able to map datatype values into
> some sort of numeric range so that we can compute what fraction of the
> low-key-to-high-key range is on each side of the probe value (the
> constant taken from the query). This general concept will apply to
> many scalar types, so what we want is a type-specific mapping function
> and a less-specific fraction-computing-function. Offhand I'd say that
> we want intltsel() and floatltsel(), plus conversion routines that can
> produce either int4 or float8 from a data type as seems appropriate.
> Anything that couldn't map to one or the other would have to supply its
> own selectivity function.
>
This is what my example then does. Uses the stored sort op to get the
type and then uses typinput to convert from the string to an int4.
Then puts the int4 back into string format because that's what everyone
was expecting.
It seems to work for my particular query. I now get:
(selfuncs) gethilokey() obj 18663 attr 11 opid 1096 (ignored)
(selfuncs) gethilokey() found op 1087 in pg_proc
(selfuncs) gethilokey() found type 1082 in pg_type
(selfuncs) gethilokey() going to use 1084 to convert type 1082
(selfuncs) gethilokey() have low -2921 high -396
(selfuncs) intltsel() high -396 low -2921 val -486
(plancat) restriction_selectivity() for func 103 op 1096 rel 18663 attr
11 const -486 flag 3 returns 0.964356
NOTICE: QUERY PLAN:
Sort (cost=34467.88 size=0 width=0)
-> Aggregate (cost=34467.88 size=0 width=0)
-> Group (cost=34467.88 size=0 width=0)
-> Sort (cost=34467.88 size=0 width=0)
-> Seq Scan on lineitem (cost=34467.88 size=579166 width=44)
including my printfs, which exist in the patch as well.
Selectivity is now the expected 96% and the size estimate for the seq
scan is much closer to correct.
Again, not tested with anything besides date, so caveat not-tested.
Hope this helps.
Erik
----------------------[optimizer_fix.sh]------------------------
#! /bin/sh
# This is a shell archive, meaning:
# 1. Remove everything above the #! /bin/sh line.
# 2. Save the resulting text in a file.
# 3. Execute the file with /bin/sh (not csh) to create:
# selfuncs.c.diff
# vacuum.c.diff
# This archive created: Mon Mar 22 22:58:14 1999
export PATH; PATH=/bin:/usr/bin:$PATH
if test -f 'selfuncs.c.diff'
then
echo shar: "will not over-write existing file 'selfuncs.c.diff'"
else
cat << \SHAR_EOF > 'selfuncs.c.diff'
***
/afs/ece.cmu.edu/project/lcs/lcs-004/er1p/postgres/611/src/backend/utils/adt
/selfuncs.c Thu Mar 11 23:59:35 1999
---
/afs/ece.cmu.edu/project/lcs/lcs-004/er1p/postgres/615/src/backend/utils/adt
/selfuncs.c Mon Mar 22 22:57:25 1999
***************
*** 32,37 ****
--- 32,40 ----
#include "utils/lsyscache.h" /* for get_oprrest() */
#include "catalog/pg_statistic.h"
+ #include "catalog/pg_proc.h" /* for Form_pg_proc */
+ #include "catalog/pg_type.h" /* for Form_pg_type */
+
/* N is not a valid var/constant or relation id */
#define NONVALUE(N) ((N) == -1)
***************
*** 103,110 ****
bottom;
result = (float64) palloc(sizeof(float64data));
! if (NONVALUE(attno) || NONVALUE(relid))
*result = 1.0 / 3;
else
{
/* XXX val = atol(value); */
--- 106,114 ----
bottom;
result = (float64) palloc(sizeof(float64data));
! if (NONVALUE(attno) || NONVALUE(relid)) {
*result = 1.0 / 3;
+ }
else
{
/* XXX val = atol(value); */
***************
*** 117,130 ****
}
high = atol(highchar);
low = atol(lowchar);
if ((flag & SEL_RIGHT && val < low) ||
(!(flag & SEL_RIGHT) && val > high))
{
float32data nvals;
nvals = getattdisbursion(relid, (int) attno);
! if (nvals == 0)
*result = 1.0 / 3.0;
else
{
*result = 3.0 * (float64data) nvals;
--- 121,136 ----
}
high = atol(highchar);
low = atol(lowchar);
+ printf("(selfuncs) intltsel() high %d low %d val %d\n",high,low,val);
if ((flag & SEL_RIGHT && val < low) ||
(!(flag & SEL_RIGHT) && val > high))
{
float32data nvals;
nvals = getattdisbursion(relid, (int) attno);
! if (nvals == 0) {
*result = 1.0 / 3.0;
+ }
else
{
*result = 3.0 * (float64data) nvals;
***************
*** 336,341 ****
--- 342,353 ----
{
Relation rel;
HeapScanDesc scan;
+ /* this assumes there is only one row in the statistics table for any
particular */
+ /* relid, attnum pair - could be more complicated if staop is also
used. */
+ /* at the moment, if there are multiple rows, this code ends up
picking the */
+ /* "first" one
- er1p */
+ /* the actual "ignoring" is done in the call to heap_beginscan()
below, where */
+ /* we only mention 2 of the 3 keys in this array
- er1p */
static ScanKeyData key[3] = {
{0, Anum_pg_statistic_starelid, F_OIDEQ, {0, 0, F_OIDEQ}},
{0, Anum_pg_statistic_staattnum, F_INT2EQ, {0, 0, F_INT2EQ}},
***************
*** 344,355 ****
bool isnull;
HeapTuple tuple;
rel = heap_openr(StatisticRelationName);
key[0].sk_argument = ObjectIdGetDatum(relid);
key[1].sk_argument = Int16GetDatum((int16) attnum);
key[2].sk_argument = ObjectIdGetDatum(opid);
! scan = heap_beginscan(rel, 0, SnapshotNow, 3, key);
tuple = heap_getnext(scan, 0);
if (!HeapTupleIsValid(tuple))
{
--- 356,377 ----
bool isnull;
HeapTuple tuple;
+ HeapTuple tup;
+ Form_pg_proc proc;
+ Form_pg_type typ;
+ Oid which_op;
+ Oid which_type;
+ int32 low_value;
+ int32 high_value;
+
rel = heap_openr(StatisticRelationName);
key[0].sk_argument = ObjectIdGetDatum(relid);
key[1].sk_argument = Int16GetDatum((int16) attnum);
key[2].sk_argument = ObjectIdGetDatum(opid);
! printf("(selfuncs) gethilokey() obj %d attr %d opid %d (ignored)\n",
! key[0].sk_argument,key[1].sk_argument,key[2].sk_argument);
! scan = heap_beginscan(rel, 0, SnapshotNow, 2, key);
tuple = heap_getnext(scan, 0);
if (!HeapTupleIsValid(tuple))
{
***************
*** 376,383 ****
--- 398,461 ----
&isnull));
if (isnull)
elog(DEBUG, "gethilokey: low key is null");
+
heap_endscan(scan);
heap_close(rel);
+
+ /* now we deal with type conversion issues
*/
+ /* when intltsel() calls this routine (who knows what other callers
might do) */
+ /* it assumes that it can call atol() on the strings and then use
integer */
+ /* comparison from there. what we are going to do here, then, is try
to use */
+ /* the type information from Anum_pg_statistic_staop to convert the
high */
+ /* and low values
- er1p */
+
+ /* WARNING: this code has only been tested with the date type and has
NOT */
+ /* been regression tested. consider it "sample" code of what might
be the */
+ /* right kind of thing to do
- er1p */
+
+ /* get the 'op' from pg_statistic and look it up in pg_proc */
+ which_op = heap_getattr(tuple,
+ Anum_pg_statistic_staop,
+ RelationGetDescr(rel),
+ &isnull);
+ if (InvalidOid == which_op) {
+ /* ignore all this stuff, try conversion only if we have a valid staop */
+ /* note that there is an accompanying change to 'vacuum analyze' that */
+ /* gets this set to something useful. */
+ } else {
+ /* staop looks valid, so let's see what we can do about conversion */
+ tup = SearchSysCacheTuple(PROOID, ObjectIdGetDatum(which_op), 0, 0, 0);
+ if (!HeapTupleIsValid(tup)) {
+ elog(ERROR, "selfuncs: unable to find op in pg_proc %d", which_op);
+ }
+ printf("(selfuncs) gethilokey() found op %d in pg_proc\n",which_op);
+
+ /* use that to determine the type of stahikey and stalokey via pg_type */
+ proc = (Form_pg_proc) GETSTRUCT(tup);
+ which_type = proc->proargtypes[0]; /* XXX - use left and right
separately? */
+ tup = SearchSysCacheTuple(TYPOID, ObjectIdGetDatum(which_type), 0, 0, 0);
+ if (!HeapTupleIsValid(tup)) {
+ elog(ERROR, "selfuncs: unable to find type in pg_type %d", which_type);
+ }
+ printf("(selfuncs) gethilokey() found type %d in pg_type\n",which_type);
+
+ /* and use that type to get the conversion function to int4 */
+ typ = (Form_pg_type) GETSTRUCT(tup);
+ printf("(selfuncs) gethilokey() going to use %d to convert type
%d\n",typ->typinput,which_type);
+
+ /* and convert the low and high strings */
+ low_value = (int32) fmgr(typ->typinput, *low, -1);
+ high_value = (int32) fmgr(typ->typinput, *high, -1);
+ printf("(selfuncs) gethilokey() have low %d high
%d\n",low_value,high_value);
+
+ /* now we have int4's, which we put back into strings because
that's what out */
+ /* callers (intltsel() at least) expect
- er1p */
+ pfree(*low); pfree(*high); /* let's not leak the old strings */
+ *low = int4out(low_value);
+ *high = int4out(high_value);
+
+ /* XXX - this probably leaks the two tups we got from
SearchSysCacheTuple() - er1p */
+ }
}
float64
SHAR_EOF
fi
if test -f 'vacuum.c.diff'
then
echo shar: "will not over-write existing file 'vacuum.c.diff'"
else
cat << \SHAR_EOF > 'vacuum.c.diff'
***
/afs/ece.cmu.edu/project/lcs/lcs-004/er1p/postgres/611/src/backend/commands/
vacuum.c Thu Mar 11 23:59:09 1999
---
/afs/ece.cmu.edu/project/lcs/lcs-004/er1p/postgres/615/src/backend/commands/
vacuum.c Mon Mar 22 21:23:15 1999
***************
*** 1842,1848 ****
i = 0;
values[i++] = (Datum) relid; /* 1 */
values[i++] = (Datum) attp->attnum; /* 2 */
! values[i++] = (Datum) InvalidOid; /* 3 */
fmgr_info(stats->outfunc, &out_function);
out_string = (*fmgr_faddr(&out_function)) (stats->min,
stats->attr->atttypid);
values[i++] = (Datum) fmgr(F_TEXTIN, out_string);
--- 1842,1848 ----
i = 0;
values[i++] = (Datum) relid; /* 1 */
values[i++] = (Datum) attp->attnum; /* 2 */
! values[i++] = (Datum) stats->f_cmplt.fn_oid; /* 3 */ /* get the
'<' oid, instead of 'invalid' - er1p */
fmgr_info(stats->outfunc, &out_function);
out_string = (*fmgr_faddr(&out_function)) (stats->min,
stats->attr->atttypid);
values[i++] = (Datum) fmgr(F_TEXTIN, out_string);
SHAR_EOF
fi
exit 0
# End of shell archive
From owner-pgsql-hackers@hub.org Tue Mar 23 12:31:05 1999
Received: from renoir.op.net (root@renoir.op.net [209.152.193.4])
by candle.pha.pa.us (8.9.0/8.9.0) with ESMTP id MAA17491
for <maillist@candle.pha.pa.us>; Tue, 23 Mar 1999 12:31:04 -0500 (EST)
Received: from hub.org (majordom@hub.org [209.47.145.100]) by renoir.op.net (o1/$Revision: 1.6 $) with ESMTP id MAA08839 for <maillist@candle.pha.pa.us>; Tue, 23 Mar 1999 12:08:14 -0500 (EST)
Received: from localhost (majordom@localhost)
by hub.org (8.9.2/8.9.1) with SMTP id MAA93649;
Tue, 23 Mar 1999 12:04:57 -0500 (EST)
(envelope-from owner-pgsql-hackers@hub.org)
Received: by hub.org (TLB v0.10a (1.23 tibbs 1997/01/09 00:29:32)); Tue, 23 Mar 1999 12:03:00 +0000 (EST)
Received: (from majordom@localhost)
by hub.org (8.9.2/8.9.1) id MAA93355
for pgsql-hackers-outgoing; Tue, 23 Mar 1999 12:02:55 -0500 (EST)
(envelope-from owner-pgsql-hackers@postgreSQL.org)
Received: from sss.sss.pgh.pa.us (sss.pgh.pa.us [206.210.65.6])
by hub.org (8.9.2/8.9.1) with ESMTP id MAA93336
for <pgsql-hackers@postgreSQL.org>; Tue, 23 Mar 1999 12:02:43 -0500 (EST)
(envelope-from tgl@sss.pgh.pa.us)
Received: from sss.sss.pgh.pa.us (localhost [127.0.0.1])
by sss.sss.pgh.pa.us (8.9.1/8.9.1) with ESMTP id MAA24455;
Tue, 23 Mar 1999 12:01:57 -0500 (EST)
To: Erik Riedel <riedel+@CMU.EDU>
cc: pgsql-hackers@postgreSQL.org
Subject: Re: [HACKERS] optimizer and type question
In-reply-to: Your message of Mon, 22 Mar 1999 23:14:55 -0500 (EST)
<4qxlJ0200anI01hK40@andrew.cmu.edu>
Date: Tue, 23 Mar 1999 12:01:57 -0500
Message-ID: <24453.922208517@sss.pgh.pa.us>
From: Tom Lane <tgl@sss.pgh.pa.us>
Sender: owner-pgsql-hackers@postgreSQL.org
Precedence: bulk
Status: RO
Erik Riedel <riedel+@CMU.EDU> writes:
> OK, building on your high-level explanation, I am attaching a patch that
> attempts to do something "better" than the current code. Note that I
> have only tested this with the date type and my particular query.
Glad to see you working on this. I don't like the details of your
patch too much though ;-). Here are some suggestions for making it
better.
1. I think just removing staop from the lookup in gethilokey is OK for
now, though I'm dubious about Bruce's thought that we could delete that
field entirely. As you observe, vacuum will not currently put more
than one tuple for a column into pg_statistic, so we can just do the
lookup with relid and attno and leave it at that. But I think we ought
to leave the field there, with the idea that vacuum might someday
compute more than one statistic for a data column. Fixing vacuum to
put its sort op into the field is a good idea in the meantime.
2. The type conversion you're doing in gethilokey is a mess; I think
what you ought to make it do is simply the inbound conversion of the
string from pg_statistic into the internal representation for the
column's datatype, and return that value as a Datum. It also needs
a cleaner success/failure return convention --- this business with
"n" return is ridiculously type-specific. Also, the best and easiest
way to find the type to convert to is to look up the column type in
the info for the given relid, not search pg_proc with the staop value.
(I'm not sure that will even work, since there are pg_proc entries
with wildcard argument types.)
3. The atol() calls currently found in intltsel are a type-specific
cheat on what is conceptually a two-step process:
* Convert the string stored in pg_statistic back to the internal
form for the column data type.
* Generate a numeric representation of the data value that can be
used as an estimate of the range of values in the table.
The second step is trivial for integers, which may obscure the fact
that there are two steps involved, but nonetheless there are. If
you think about applying selectivity logic to strings, say, it
becomes clear that the second step is a necessary component of the
process. Furthermore, the second step must also be applied to the
probe value that's being passed into the selectivity operator.
(The probe value is already in internal form, of course; but it is
not necessarily in a useful numeric form.)
We can do the first of these steps by applying the appropriate "XXXin"
conversion function for the column data type, as you have done. The
interesting question is how to do the second one. A really clean
solution would require adding a column to pg_type that points to a
function that will do the appropriate conversion. I'd be inclined to
make all of these functions return "double" (float8) and just have one
top-level selectivity routine for all data types that can use
range-based selectivity logic.
We could probably hack something together that would not use an explicit
conversion function for each data type, but instead would rely on
type-specific assumptions inside the selectivity routines. We'd need many
more selectivity routines though (at least one for each of int, float4,
float8, and text data types) so I'm not sure we'd really save any work
compared to doing it right.
BTW, now that I look at this issue it's real clear that the selectivity
entries in pg_operator are horribly broken. The intltsel/intgtsel
selectivity routines are currently applied to 32 distinct data types:
regression=> select distinct typname,oprleft from pg_operator, pg_type
regression-> where pg_type.oid = oprleft
regression-> and oprrest in (103,104);
typname |oprleft
---------+-------
_aclitem | 1034
abstime | 702
bool | 16
box | 603
bpchar | 1042
char | 18
cidr | 650
circle | 718
date | 1082
datetime | 1184
float4 | 700
float8 | 701
inet | 869
int2 | 21
int4 | 23
int8 | 20
line | 628
lseg | 601
macaddr | 829
money | 790
name | 19
numeric | 1700
oid | 26
oid8 | 30
path | 602
point | 600
polygon | 604
text | 25
time | 1083
timespan | 1186
timestamp| 1296
varchar | 1043
(32 rows)
many of which are very obviously not compatible with integer for *any*
purpose. It looks to me like a lot of data types were added to
pg_operator just by copy-and-paste, without paying attention to whether
the selectivity routines were actually correct for the data type.
As the code stands today, the bogus entries don't matter because
gethilokey always fails, so we always get 1/3 as the selectivity
estimate for any comparison operator (except = and != of course).
I had actually noticed that fact and assumed that it was supposed
to work that way :-(. But, clearly, there is code in here that
is *trying* to be smarter.
As soon as we fix gethilokey so that it can succeed, we will start
getting essentially-random selectivity estimates for those data types
that aren't actually binary-compatible with integer. That will not do;
we have to do something about the issue.
regards, tom lane
From tgl@sss.pgh.pa.us Tue Mar 23 12:31:02 1999
Received: from renoir.op.net (root@renoir.op.net [209.152.193.4])
by candle.pha.pa.us (8.9.0/8.9.0) with ESMTP id MAA17484
for <maillist@candle.pha.pa.us>; Tue, 23 Mar 1999 12:31:01 -0500 (EST)
Received: from sss.sss.pgh.pa.us (sss.pgh.pa.us [206.210.65.6]) by renoir.op.net (o1/$Revision: 1.6 $) with ESMTP id MAA09042 for <maillist@candle.pha.pa.us>; Tue, 23 Mar 1999 12:10:55 -0500 (EST)
Received: from sss.sss.pgh.pa.us (localhost [127.0.0.1])
by sss.sss.pgh.pa.us (8.9.1/8.9.1) with ESMTP id MAA24474;
Tue, 23 Mar 1999 12:09:52 -0500 (EST)
To: Bruce Momjian <maillist@candle.pha.pa.us>
cc: riedel+@CMU.EDU, pgsql-hackers@postgreSQL.org
Subject: Re: [HACKERS] optimizer and type question
In-reply-to: Your message of Mon, 22 Mar 1999 21:25:45 -0500 (EST)
<199903230225.VAA01641@candle.pha.pa.us>
Date: Tue, 23 Mar 1999 12:09:52 -0500
Message-ID: <24471.922208992@sss.pgh.pa.us>
From: Tom Lane <tgl@sss.pgh.pa.us>
Status: RO
Bruce Momjian <maillist@candle.pha.pa.us> writes:
> What we really need is some way to determine how far the requested value
> is from the min/max values. With int, we just do (val-min)/(max-min).
> That works, but how do we do that for types that don't support division.
> Strings come to mind in this case.
What I'm envisioning is that we still apply the (val-min)/(max-min)
logic, but apply it to numeric values that are produced in a
type-dependent way.
For ints and floats the conversion is trivial, of course.
For strings, the first thing that comes to mind is to return 0 for a
null string and the value of the first byte for a non-null string.
This would give you one-part-in-256 selectivity which is plenty good
enough for what the selectivity code needs to do. (Actually, it's
only that good if the strings' first bytes are pretty well spread out.
If you have a table containing English words, for example, you might
only get about one part in 26 this way, since the first bytes will
probably only run from A to Z. Might be better to use the first two
characters of the string to compute the selectivity representation.)
In general, you can apply this logic as long as you can come up with
some numerical approximation to the data type's sorting order. It
doesn't have to be exact.
regards, tom lane
From owner-pgsql-hackers@hub.org Tue Mar 23 12:31:03 1999
Received: from renoir.op.net (root@renoir.op.net [209.152.193.4])
by candle.pha.pa.us (8.9.0/8.9.0) with ESMTP id MAA17488
for <maillist@candle.pha.pa.us>; Tue, 23 Mar 1999 12:31:02 -0500 (EST)
Received: from hub.org (majordom@hub.org [209.47.145.100]) by renoir.op.net (o1/$Revision: 1.6 $) with ESMTP id MAA09987 for <maillist@candle.pha.pa.us>; Tue, 23 Mar 1999 12:21:34 -0500 (EST)
Received: from localhost (majordom@localhost)
by hub.org (8.9.2/8.9.1) with SMTP id MAA95155;
Tue, 23 Mar 1999 12:18:33 -0500 (EST)
(envelope-from owner-pgsql-hackers@hub.org)
Received: by hub.org (TLB v0.10a (1.23 tibbs 1997/01/09 00:29:32)); Tue, 23 Mar 1999 12:17:00 +0000 (EST)
Received: (from majordom@localhost)
by hub.org (8.9.2/8.9.1) id MAA94857
for pgsql-hackers-outgoing; Tue, 23 Mar 1999 12:16:56 -0500 (EST)
(envelope-from owner-pgsql-hackers@postgreSQL.org)
Received: from sss.sss.pgh.pa.us (sss.pgh.pa.us [206.210.65.6])
by hub.org (8.9.2/8.9.1) with ESMTP id MAA94469
for <pgsql-hackers@postgreSQL.org>; Tue, 23 Mar 1999 12:11:33 -0500 (EST)
(envelope-from tgl@sss.pgh.pa.us)
Received: from sss.sss.pgh.pa.us (localhost [127.0.0.1])
by sss.sss.pgh.pa.us (8.9.1/8.9.1) with ESMTP id MAA24474;
Tue, 23 Mar 1999 12:09:52 -0500 (EST)
To: Bruce Momjian <maillist@candle.pha.pa.us>
cc: riedel+@CMU.EDU, pgsql-hackers@postgreSQL.org
Subject: Re: [HACKERS] optimizer and type question
In-reply-to: Your message of Mon, 22 Mar 1999 21:25:45 -0500 (EST)
<199903230225.VAA01641@candle.pha.pa.us>
Date: Tue, 23 Mar 1999 12:09:52 -0500
Message-ID: <24471.922208992@sss.pgh.pa.us>
From: Tom Lane <tgl@sss.pgh.pa.us>
Sender: owner-pgsql-hackers@postgreSQL.org
Precedence: bulk
Status: RO
Bruce Momjian <maillist@candle.pha.pa.us> writes:
> What we really need is some way to determine how far the requested value
> is from the min/max values. With int, we just do (val-min)/(max-min).
> That works, but how do we do that for types that don't support division.
> Strings come to mind in this case.
What I'm envisioning is that we still apply the (val-min)/(max-min)
logic, but apply it to numeric values that are produced in a
type-dependent way.
For ints and floats the conversion is trivial, of course.
For strings, the first thing that comes to mind is to return 0 for a
null string and the value of the first byte for a non-null string.
This would give you one-part-in-256 selectivity which is plenty good
enough for what the selectivity code needs to do. (Actually, it's
only that good if the strings' first bytes are pretty well spread out.
If you have a table containing English words, for example, you might
only get about one part in 26 this way, since the first bytes will
probably only run from A to Z. Might be better to use the first two
characters of the string to compute the selectivity representation.)
In general, you can apply this logic as long as you can come up with
some numerical approximation to the data type's sorting order. It
doesn't have to be exact.
regards, tom lane
Reference in New Issue View Git Blame Copy Permalink