Source code formatting uses 4 column tab spacing, with tabs preserved (i.e. tabs are not expanded to spaces). Each logical indentation level is one additional tab stop. Layout rules (brace positioning, etc) follow BSD conventions. While submitted patches do not absolutely have to follow these formatting rules, it's a good idea to do so. Your code will get run through pgindent, so there's no point in making it look nice under some other set of formatting conventions. For Emacs, add the following (or something similar) to your ~/.emacs initialization file: ;; check for files with a path containing "postgres" or "pgsql" (setq auto-mode-alist (cons '("\\(postgres\\|pgsql\\).*\\.[ch]\\'" . pgsql-c-mode) auto-mode-alist)) (setq auto-mode-alist (cons '("\\(postgres\\|pgsql\\).*\\.cc\\'" . pgsql-c-mode) auto-mode-alist)) (defun pgsql-c-mode () ;; sets up formatting for PostgreSQL C code (interactive) (c-mode) (setq-default tab-width 4) (c-set-style "bsd") ; set c-basic-offset to 4, plus other stuff (c-set-offset 'case-label '+) ; tweak case indent to match PG custom (setq indent-tabs-mode t)) ; make sure we keep tabs when indenting For vi, your ~/.vimrc or equivalent file should contain the following: set tabstop=4 or equivalently from within vi, try :set ts=4 The text browsing tools more and less can be invoked as more -x4 less -x4 to make them show tabs appropriately. ereport elog Error, warning, and log messages generated within the server code should be created using ereport, or its older cousin elog. The use of this function is complex enough to require some explanation. There are two required elements for every message: a severity level (ranging from DEBUG to PANIC) and a primary message text. In addition there are optional elements, the most common of which is an error identifier code that follows the SQL spec's SQLSTATE conventions. ereport itself is just a shell function, that exists mainly for the syntactic convenience of making message generation look like a function call in the C source code. The only parameter accepted directly by ereport is the severity level. The primary message text and any optional message elements are generated by calling auxiliary functions, such as errmsg, within the ereport call. A typical call to ereport might look like this: ereport(ERROR, (errcode(ERRCODE_DIVISION_BY_ZERO), errmsg("division by zero"))); This specifies error severity level ERROR (a run-of-the-mill error). The errcode call specifies the SQLSTATE error code using a macro defined in src/include/utils/errcodes.h. The errmsg call provides the primary message text. Notice the extra set of parentheses surrounding the auxiliary function calls — these are annoying but syntactically necessary. Here is a more complex example: ereport(ERROR, (errcode(ERRCODE_AMBIGUOUS_FUNCTION), errmsg("function %s is not unique", func_signature_string(funcname, nargs, actual_arg_types)), errhint("Unable to choose a best candidate function. " "You may need to add explicit typecasts."))); This illustrates the use of format codes to embed run-time values into a message text. Also, an optional hint message is provided. The available auxiliary routines for ereport are: errcode(sqlerrcode) specifies the SQLSTATE error identifier code for the condition. If this routine is not called, the error identifier defaults to ERRCODE_INTERNAL_ERROR when the error severity level is ERROR or higher, ERRCODE_WARNING when the error level is WARNING, otherwise (for NOTICE and below) ERRCODE_SUCCESSFUL_COMPLETION. While these defaults are often convenient, always think whether they are appropriate before omitting the errcode() call. errmsg(const char *msg, ...) specifies the primary error message text, and possibly run-time values to insert into it. Insertions are specified by sprintf-style format codes. In addition to the standard format codes accepted by sprintf, the format code %m can be used to insert the error message returned by strerror for the current value of errno. That is, the value that was current when the ereport call was reached; changes of errno within the auxiliary reporting routines will not affect it. That would not be true if you were to write strerror(errno) explicitly in errmsg's parameter list; accordingly, do not do so. %m does not require any corresponding entry in the parameter list for errmsg. Note that the message string will be run through gettext for possible localization before format codes are processed. errmsg_internal(const char *msg, ...) is the same as errmsg, except that the message string will not be included in the internationalization message dictionary. This should be used for can't happen cases that are probably not worth expending translation effort on. errdetail(const char *msg, ...) supplies an optional detail message; this is to be used when there is additional information that seems inappropriate to put in the primary message. The message string is processed in just the same way as for errmsg. errhint(const char *msg, ...) supplies an optional hint message; this is to be used when offering suggestions about how to fix the problem, as opposed to factual details about what went wrong. The message string is processed in just the same way as for errmsg. errcontext(const char *msg, ...) is not normally called directly from an ereport message site; rather it is used in error_context_stack callback functions to provide information about the context in which an error occurred, such as the current location in a PL function. The message string is processed in just the same way as for errmsg. Unlike the other auxiliary functions, this can be called more than once per ereport call; the successive strings thus supplied are concatenated with separating newlines. errposition(int cursorpos) specifies the textual location of an error within a query string. Currently it is only useful for errors detected in the lexical and syntactic analysis phases of query processing. errcode_for_file_access() is a convenience function that selects an appropriate SQLSTATE error identifier for a failure in a file-access-related system call. It uses the saved errno to determine which error code to generate. Usually this should be used in combination with %m in the primary error message text. errcode_for_socket_access() is a convenience function that selects an appropriate SQLSTATE error identifier for a failure in a socket-related system call. There is an older function elog that is still heavily used. An elog call elog(level, "format string", ...); is exactly equivalent to ereport(level, (errmsg_internal("format string", ...))); Notice that the SQLSTATE errcode is always defaulted, and the message string is not included in the internationalization message dictionary. Therefore, elog should be used only for internal errors and low-level debug logging. Any message that is likely to be of interest to ordinary users should go through ereport. Nonetheless, there are enough internal can't happen error checks in the system that elog is still widely used; it is preferred for those messages for its notational simplicity. Advice about writing good error messages can be found in . This style guide is offered in the hope of maintaining a consistent, user-friendly style throughout all the messages generated by PostgreSQL. The primary message should be short, factual, and avoid reference to implementation details such as specific function names. Short means should fit on one line under normal conditions. Use a detail message if needed to keep the primary message short, or if you feel a need to mention implementation details such as the particular system call that failed. Both primary and detail messages should be factual. Use a hint message for suggestions about what to do to fix the problem, especially if the suggestion might not always be applicable. For example, instead of IpcMemoryCreate: shmget(key=%d, size=%u, 0%o) failed: %m (plus a long addendum that is basically a hint) write Primary: could not create shared memory segment: %m Detail: Failed syscall was shmget(key=%d, size=%u, 0%o). Hint: the addendum Rationale: keeping the primary message short helps keep it to the point, and lets clients lay out screen space on the assumption that one line is enough for error messages. Detail and hint messages may be relegated to a verbose mode, or perhaps a pop-up error-details window. Also, details and hints would normally be suppressed from the server log to save space. Reference to implementation details is best avoided since users don't know the details anyway. Don't put any specific assumptions about formatting into the message texts. Expect clients and the server log to wrap lines to fit their own needs. In long messages, newline characters (\n) may be used to indicate suggested paragraph breaks. Don't end a message with a newline. Don't use tabs or other formatting characters. (In error context displays, newlines are automatically added to separate levels of context such as function calls.) Rationale: Messages are not necessarily displayed on terminal-type displays. In GUI displays or browsers these formatting instructions are at best ignored. English text should use double quotes when quoting is appropriate. Text in other languages should consistently use one kind of quotes that is consistent with publishing customs and computer output of other programs. Rationale: The choice of double quotes over single quotes is somewhat arbitrary, but tends to be the preferred use. Some have suggested choosing the kind of quotes depending on the type of object according to SQL conventions (namely, strings single quoted, identifiers double quoted). But this is a language-internal technical issue that many users aren't even familiar with, it won't scale to other kinds of quoted terms, it doesn't translate to other languages, and it's pretty pointless, too. Use quotes always to delimit file names, user-supplied identifiers, and other variables that might contain words. Do not use them to mark up variables that will not contain words (for example, operator names). There are functions in the backend that will double-quote their own output at need (for example, format_type_be()). Do not put additional quotes around the output of such functions. Rationale: Objects can have names that create ambiguity when embedded in a message. Be consistent about denoting where a plugged-in name starts and ends. But don't clutter messages with unnecessary or duplicate quote marks. The rules are different for primary error messages and for detail/hint messages: Primary error messages: Do not capitalize the first letter. Do not end a message with a period. Do not even think about ending a message with an exclamation point. Detail and hint messages: Use complete sentences, and end each with a period. Capitalize the first word of sentences. Rationale: Avoiding punctuation makes it easier for client applications to embed the message into a variety of grammatical contexts. Often, primary messages are not grammatically complete sentences anyway. (And if they're long enough to be more than one sentence, they should be split into primary and detail parts.) However, detail and hint messages are longer and may need to include multiple sentences. For consistency, they should follow complete-sentence style even when there's only one sentence. Use lower case for message wording, including the first letter of a primary error message. Use upper case for SQL commands and key words if they appear in the message. Rationale: It's easier to make everything look more consistent this way, since some messages are complete sentences and some not. Use the active voice. Use complete sentences when there is an acting subject (A could not do B). Use telegram style without subject if the subject would be the program itself; do not use I for the program. Rationale: The program is not human. Don't pretend otherwise. Use past tense if an attempt to do something failed, but could perhaps succeed next time (perhaps after fixing some problem). Use present tense if the failure is certainly permanent. There is a nontrivial semantic difference between sentences of the form could not open file "%s": %m and cannot open file "%s" The first one means that the attempt to open the file failed. The message should give a reason, such as disk full or file doesn't exist. The past tense is appropriate because next time the disk might not be full anymore or the file in question may exist. The second form indicates the the functionality of opening the named file does not exist at all in the program, or that it's conceptually impossible. The present tense is appropriate because the condition will persist indefinitely. Rationale: Granted, the average user will not be able to draw great conclusions merely from the tense of the message, but since the language provides us with a grammar we should use it correctly. When citing the name of an object, state what kind of object it is. Rationale: Otherwise no one will know what foo.bar.baz refers to. Square brackets are only to be used (1) in command synopses to denote optional arguments, or (2) to denote an array subscript. Rationale: Anything else does not correspond to widely-known customary usage and will confuse people. When a message includes text that is generated elsewhere, embed it in this style: could not open file %s: %m Rationale: It would be difficult to account for all possible error codes to paste this into a single smooth sentence, so some sort of punctuation is needed. Putting the embedded text in parentheses has also been suggested, but it's unnatural if the embedded text is likely to be the most important part of the message, as is often the case. Messages should always state the reason why an error occurred. For example: BAD: could not open file %s BETTER: could not open file %s (I/O failure) If no reason is known you better fix the code. Don't include the name of the reporting routine in the error text. We have other mechanisms for finding that out when needed, and for most users it's not helpful information. If the error text doesn't make as much sense without the function name, reword it. BAD: pg_atoi: error in "z": can't parse "z" BETTER: invalid input syntax for integer: "z" Avoid mentioning called function names, either; instead say what the code was trying to do: BAD: open() failed: %m BETTER: could not open file %s: %m If it really seems necessary, mention the system call in the detail message. (In some cases, providing the actual values passed to the system call might be appropriate information for the detail message.) Rationale: Users don't know what all those functions do. Unable is nearly the passive voice. Better use cannot or could not, as appropriate. Error messages like bad result are really hard to interpret intelligently. It's better to write why the result is bad, e.g., invalid format. Illegal stands for a violation of the law, the rest is invalid. Better yet, say why it's invalid. Try to avoid unknown. Consider error: unknown response. If you don't know what the response is, how do you know it's erroneous? Unrecognized is often a better choice. Also, be sure to include the value being complained of. BAD: unknown node type BETTER: unrecognized node type: 42 If the program uses a nontrivial algorithm to locate a resource (e.g., a path search) and that algorithm fails, it is fair to say that the program couldn't find the resource. If, on the other hand, the expected location of the resource is known but the program cannot access it there then say that the resource doesn't exist. Using find in this case sounds weak and confuses the issue. Spell out words in full. For instance, avoid: spec stats parens auth xact Rationale: This will improve consistency. Keep in mind that error message texts need to be translated into other languages. Follow the guidelines in to avoid making life difficult for translators.