Per extensive discussion on pgsql-hackers. We are deliberately not
back-patching this even though the behavior of 8.3 and 8.4 is
unquestionably broken, for fear of breaking existing users of this
parameter. This incompatibility should be release-noted.
linking both executables and shared libraries, and we add on LDFLAGS_EX when
linking executables or LDFLAGS_SL when linking shared libraries. This
provides a significantly cleaner way of dealing with link-time switches than
the former behavior. Also, make sure that the various platform-specific
%.so: %.o rules incorporate LDFLAGS and LDFLAGS_SL; most of them missed that
before. (I did not add these variables for the platforms that invoke $(LD)
directly, however. It's not clear if we can do that safely, since for the
most part we assume these variables use CC command-line syntax.)
Per gripe from Aaron Swenson and subsequent investigation.
to have different values in different processes of the primary server.
Also put it into the "Streaming Replication" GUC category; it doesn't belong
in "Standby Servers" because you use it on the master not the standby.
In passing also correct guc.c's idea of wal_keep_segments' category.
max_standby_streaming_delay, and revise the implementation to avoid assuming
that timestamps found in WAL records can meaningfully be compared to clock
time on the standby server. Instead, the delay limits are compared to the
elapsed time since we last obtained a new WAL segment from archive or since
we were last "caught up" to WAL data arriving via streaming replication.
This avoids problems with clock skew between primary and standby, as well
as other corner cases that the original coding would misbehave in, such
as the primary server having significant idle time between transactions.
Per my complaint some time ago and considerable ensuing discussion.
Do some desultory editing on the hot standby documentation, too.
formats for geometric types. Per bug #5536 from Jon Strait, and my own
testing.
Back-patch to all supported branches, since this doco has been wrong right
along -- we certainly haven't changed the I/O behavior of these types in
many years.
The revised documentation makes it more clear that these are client-side
parameters, rather than server side parameters. It also puts the main
point of each parameter first, and consolidates the conditions under which
it might be ignored in a single list at the end.
This adds four additional connection parameters to libpq: keepalives,
keepalives_idle, keepalives_count, and keepalives_interval.
keepalives default to on, per discussion, but can be turned off by
specifying keepalives=0. The remaining parameters, where supported,
can be used to adjust how often keepalives are sent and how many
can be lost before the connection is broken.
The immediate motivation for this patch is to make sure that
walreceiver will eventually notice if the master reboots without
closing the connection cleanly, but it should be helpful in other
cases as well.
Tollef Fog Heen, Fujii Masao, and me.
In HEAD, emit a warning when an operator named => is defined.
In both HEAD and the backbranches (except in 8.2, where contrib
modules do not have documentation), document that hstore's text =>
text operator may be removed in a future release, and encourage the
use of the hstore(text, text) function instead. This function only
exists in HEAD (previously, it was called tconvert), so backpatch
it back to 8.2, when hstore was added. Per discussion.
dblink_build_sql_insert() and related functions. Now the column numbers
are treated as logical not physical column numbers. This will provide saner
behavior in the presence of dropped columns; furthermore, if we ever get
around to allowing rearrangement of logical column ordering, the original
definition would become nearly untenable from a usability standpoint.
Per recent discussion of dblink's handling of dropped columns.
Not back-patched for fear of breaking existing applications.
In particular, note that autovacuum does not yet understand that it might
need to vacuum inheritance parents as a result of changes to the child
tables.
description for vacuum_defer_cleanup_age to the correct category.
Sections in postgresql.conf are also sorted in the same order with docs.
Per gripe by Fujii Masao, suggestion by Heikki Linnakangas, and patch by me.
string for a streaming replication connection. It's ignored by the
server, but allows libpq to pick up the password from .pgpass where
"replication" is specified as the database name.
Patch by Fujii Masao per Tom's suggestion, with some wording changes by me.
pg_last_xlog_replay_location(). Per Robert Haas's suggestion, after
Itagaki Takahiro pointed out an issue in the docs. Also, some wording
changes in the docs by me.
to be initialized with proper values. Affected parameters are
fillfactor, analyze_threshold, and analyze_scale_factor.
Especially uninitialized fillfactor caused inefficient page usage
because we built a StdRdOptions struct in which fillfactor is zero
if any reloption is set for the toast table.
In addition, we disallow toast.autovacuum_analyze_threshold and
toast.autovacuum_analyze_scale_factor because we didn't actually
support them; they are always ignored.
Report by Rumko on pgsql-bugs on 12 May 2010.
Analysis by Tom Lane and Alvaro Herrera. Patch by me.
Backpatch to 8.4.
and current server clock time to SR data messages. These are not currently
used on the slave side but seem likely to be useful in future, and it'd be
better not to change the SR protocol after release. Per discussion.
Also do some minor code review and cleanup on walsender.c, and improve the
protocol documentation.
"val AS name" to "name := val", as per recent discussion.
This patch catches everything in the original named-parameters patch,
but I'm not certain that no other dependencies snuck in later (grepping
the source tree for all uses of AS soon proved unworkable).
In passing I note that we've dropped the ball at least once on keeping
ecpg's lexer (as opposed to parser) in sync with the backend. It would
be a good idea to go through all of pgc.l and see if it's in sync now.
I didn't attempt that at the moment.
table with foreign key constraints eats memory. Per off-line discussion of
bug #5480 with its reporter. Also do some minor wordsmithing elsewhere in
the same section.
move two paragraphs that apply to log shipping in general from the
"Alternative method for log shipping" section to the earlier sections.
Add varname tags where missing. Some small wording changes.
RELEASE SAVEPOINT to make an older savepoint with the same name
accessible. It's also possible to implicitly release the savepoint by
rolling back to an earlier savepoint, but mentioning that too would make
the note just more verbose and confusing.
This allows the index to reference the pg_notify() subsection specifically,
rather than Notes section of the NOTIFY reference page more generally.
Fujii Masao
This avoids a formatting problem in the PDF output. In the HTML output this
isn't necessary, but we've done similar things elsewhere in the documentation
so I think it's OK to do it here, too. I've refrained from breaking a longish
error message which also causes problems for the PDF output, because that would
make the HTML output look wrong.
Erik Rijkers
that is a regular table or view owned by a superuser. This prevents a
trojan horse attack whereby any unprivileged SQL user could create such a
table and insert code into it that would then get executed in other users'
sessions whenever they call pltcl functions.
Worse yet, because the code was automatically loaded into both the "normal"
and "safe" interpreters at first use, the attacker could execute unrestricted
Tcl code in the "normal" interpreter without there being any pltclu functions
anywhere, or indeed anyone else using pltcl at all: installing pltcl is
sufficient to open the hole. Change the initialization logic so that the
"unknown" code is only loaded into an interpreter when the interpreter is
first really used. (That doesn't add any additional security in this
particular context, but it seems a prudent change, and anyway the former
behavior violated the principle of least astonishment.)
Security: CVE-2010-1170
fundamentally insecure. Instead apply an opmask to the whole interpreter that
imposes restrictions on unsafe operations. These restrictions are much harder
to subvert than is Safe.pm, since there is no container to be broken out of.
Backported to release 7.4.
In releases 7.4, 8.0 and 8.1 this also includes the necessary backporting of
the two interpreters model for plperl and plperlu adopted in release 8.2.
In versions 8.0 and up, the use of Perl's POSIX module to undo its locale
mangling on Windows has become insecure with these changes, so it is
replaced by our own routine, which is also faster.
Nice side effects of the changes include that it is now possible to use perl's
"strict" pragma in a natural way in plperl, and that perl's $a and
$b variables now work as expected in sort routines, and that function
compilation is significantly faster.
Tim Bunce and Andrew Dunstan, with reviews from Alex Hunsaker and
Alexey Klyukin.
Security: CVE-2010-1169
MaxStandbyDelay. Use the GUC units mechanism for the value, and choose more
appropriate timestamp functions for performing tests with it. Make the
ps_activity manipulation in ResolveRecoveryConflictWithVirtualXIDs have
behavior similar to ps_activity code elsewhere, notably not updating the
display when update_process_title is off and not truncating the display
contents at an arbitrarily-chosen length. Improve the docs to be explicit
about what MaxStandbyDelay actually measures, viz the difference between
primary and standby servers' clocks, and the possible hazards if their clocks
aren't in sync.
It appears that gmake gets confused if postgres.sgml is not present in
the working directory, and instantiates some default rule or other that
would let postgres.sgml be built from postgres.xml. I haven't been able
to track down exactly where that's coming from, but the problem can be
dodged by specifying srcdir explicitly in the rule for postgres.xml.
Per report from Vladimir Kokovic.
The previous coding had it in a pipe, which on most shells won't report
the error. Per experimentation with a bug report from Vladimir Kokovic.
This doesn't actually fix his problem, but it does explain why make
didn't report that there was a problem.
possible to set most of the SHM kernel parameters without a reboot.
Also, reorder the paragraph to explain the modern configuration method first.
There are probably not too many people who still care about how to do it on
OS X 10.3 or older.
to perform a backup without archive_mode being enabled. This gives up some
user-error protection in order to improve usefulness for streaming-replication
scenarios. Per discussion.
