and RelationNameGetTupleDesc() as deprecated; remove uses of the
latter in the contrib library. Along the way, clean up crosstab()
code and documentation a little.
This was the last piece of code that took it upon itself to reset the
random number sequence --- now we only have srandom() in postmaster start,
backend start, and explicit setseed() operations.
>>Sounds like all that's needed for your case. But to be complete, in
>>addition to changing tablefunc.c we'd have to:
>>1) come up with a new function call signature that makes sense and does
>>not cause backward compatibility problems for other people
>>2) make needed changes to tablefunc.sql.in
>>3) adjust the README.tablefunc appropriately
>>4) adjust the regression test for new functionality
>>5) be sure we don't break any of the old cases
>>
>>If you want to submit a complete patch, it would be gratefully accepted
>>-- for review at least ;-)
>
> Here's the patch, at least for steps 1-3
Nabil Sayegh
Joe Conway
version of crosstab. This fixes a major deficiency in real-world use of
the original version. Easiest to undestand with an illustration:
Data:
-------------------------------------------------------------------
select * from cth;
id | rowid | rowdt | attribute | val
----+-------+---------------------+----------------+---------------
1 | test1 | 2003-03-01 00:00:00 | temperature | 42
2 | test1 | 2003-03-01 00:00:00 | test_result | PASS
3 | test1 | 2003-03-01 00:00:00 | volts | 2.6987
4 | test2 | 2003-03-02 00:00:00 | temperature | 53
5 | test2 | 2003-03-02 00:00:00 | test_result | FAIL
6 | test2 | 2003-03-02 00:00:00 | test_startdate | 01 March 2003
7 | test2 | 2003-03-02 00:00:00 | volts | 3.1234
(7 rows)
Original crosstab:
-------------------------------------------------------------------
SELECT * FROM crosstab(
'SELECT rowid, attribute, val FROM cth ORDER BY 1,2',4)
AS c(rowid text, temperature text, test_result text, test_startdate
text, volts text);
rowid | temperature | test_result | test_startdate | volts
-------+-------------+-------------+----------------+--------
test1 | 42 | PASS | 2.6987 |
test2 | 53 | FAIL | 01 March 2003 | 3.1234
(2 rows)
Hashed crosstab:
-------------------------------------------------------------------
SELECT * FROM crosstab(
'SELECT rowid, attribute, val FROM cth ORDER BY 1',
'SELECT DISTINCT attribute FROM cth ORDER BY 1')
AS c(rowid text, temperature int4, test_result text, test_startdate
timestamp, volts float8);
rowid | temperature | test_result | test_startdate | volts
-------+-------------+-------------+---------------------+--------
test1 | 42 | PASS | | 2.6987
test2 | 53 | FAIL | 2003-03-01 00:00:00 | 3.1234
(2 rows)
Notice that the original crosstab slides data over to the left in the
result tuple when it encounters missing data. In order to work around
this you have to be make your source sql do all sorts of contortions
(cartesian join of distinct rowid with distinct attribute; left join
that back to the real source data). The new version avoids this by
building a hash table using a second distinct attribute query.
The new version also allows for "extra" columns (see the README) and
allows the result columns to be coerced into differing datatypes if they
are suitable (as shown above).
In testing a "real-world" data set (69 distinct rowid's, 27 distinct
categories/attributes, multiple missing data points) I saw about a
5-fold improvement in execution time (from about 2200 ms old, to 440 ms
new).
I left the original version intact because: 1) BC, 2) it is probably
slightly faster if you know that you have no missing attributes.
README and regression test adjustments included. If there are no
objections, please apply.
Joe Conway
> contrib/tablefunc/tablefunc.c:connectby. But, other unmanageable error
> seems to occur even if a table has commonplace tree data(see below).
>
> I would think the patch, ancestor check, should be
>
> if (strstr(branch_delim || branchstr->data || branch_delim,
> branch_delim || current_key || branch_delim))
>
> This is my image, not a real code. However, if branchstr->data includes
> branch_delim, my image will not be perfect.
Good point. Thank you Masaru for the suggested fix.
Attached is a patch to fix the bug found by Masaru. His example now
produces:
regression=# SELECT * FROM connectby('connectby_tree', 'keyid',
'parent_keyid', '11', 0, '-') AS t(keyid int, parent_keyid int, level
int,
branch text);
keyid | parent_keyid | level | branch
-------+--------------+-------+----------
11 | | 0 | 11
10 | 11 | 1 | 11-10
111 | 11 | 1 | 11-111
1 | 111 | 2 | 11-111-1
(4 rows)
While making the patch I also realized that the "no show branch" form of
the function was not going to work very well for recursion detection.
Therefore there is now a default branch delimiter ('~') that is used
internally, for that case, to enable recursion detection to work. If
you need a different delimiter for your specific data, you will have to
use the "show branch" form of the function.
Joe Conway
function, connectby(), which can serve as a reference implementation for
the changes made in the last few days -- namely the ability of a
function to return an entire tuplestore, and the ability of a function
to make use of the query provided "expected" tuple description.
Description:
connectby(text relname, text keyid_fld, text parent_keyid_fld,
text start_with, int max_depth [, text branch_delim])
- returns keyid, parent_keyid, level, and an optional branch string
- requires anonymous composite type syntax in the FROM clause. See
the instructions in the documentation below.
Joe Conway
composite type capability makes it possible to create a system view
based on a table function in a way that is hopefully palatable to
everyone. The attached patch takes advantage of this, moving
show_all_settings() from contrib/tablefunc into the backend (renamed
all_settings(). It is defined as a builtin returning type RECORD. During
initdb a system view is created to expose the same information presently
available through SHOW ALL. For example:
test=# select * from pg_settings where name like '%debug%';
name | setting
-----------------------+---------
debug_assertions | on
debug_pretty_print | off
debug_print_parse | off
debug_print_plan | off
debug_print_query | off
debug_print_rewritten | off
wal_debug | 0
(7 rows)
Additionally during initdb two rules are created which make it possible
to change settings by updating the system view -- a "virtual table" as
Tom put it. Here's an example:
Joe Conway
three functions which exercise the tablefunc API.
show_all_settings()
- returns the same information as SHOW ALL, but as a query result
normal_rand(int numvals, float8 mean, float8 stddev, int seed)
- returns a set of normally distributed float8 values
- This routine implements Algorithm P (Polar method for normal
deviates) from Knuth's _The_Art_of_Computer_Programming_, Volume 2,
3rd ed., pages 122-126. Knuth cites his source as "The polar
method", G. E. P. Box, M. E. Muller, and G. Marsaglia,
_Annals_Math,_Stat._ 29 (1958), 610-611.
crosstabN(text sql)
- returns a set of row_name plus N category value columns
- crosstab2(), crosstab3(), and crosstab4() are defined for you,
but you can create additional crosstab functions per directions
in the README.
Joe Conway
