This new view provides insight into the state of a running WAL receiver
in a HOT standby node.
The information returned includes the PID of the WAL receiver process,
its status (stopped, starting, streaming, etc), start LSN and TLI, last
received LSN and TLI, timestamp of last message send and receipt, latest
end-of-WAL LSN and time, and the name of the slot (if any).
Access to the detailed data is only granted to superusers; others only
get the PID.
Author: Michael Paquier
Reviewer: Haribabu Kommi
Using cstring as the input type was a poor decision, because that's not
really a full-fledged type. In particular, it lacks implicit coercions
from text or varchar, meaning that usages like to_regproc('foo'||'bar')
wouldn't work; basically the only case that did work without explicit
casting was a simple literal constant argument.
The lack of field complaints about this suggests that hardly anyone
is using these functions, so hopefully fixing it won't cause much of
a compatibility problem. They've only been there since 9.4, anyway.
Petr Korobeinikov
Commit 43cd468cf0 added some wording to create_policy.sgml purporting
to warn users against a race condition of the sort that had been noted some
time ago by Peter Geoghegan. However, that warning was far too vague to be
useful (or at least, I completely failed to grasp what it was on about).
Since the problem case occurs with a security design pattern that lots of
people are likely to try to use, we need to be as clear as possible about
it. Provide a concrete example in the main-line docs in place of the
original warning.
Some time back we agreed that row_security=off should not be a way to
bypass RLS entirely, but only a way to get an error if it was being
applied. However, the code failed to act that way for table owners.
Per discussion, this is a must-fix bug for 9.5.0.
Adjust the logic in rls.c to behave as expected; also, modify the
error message to be more consistent with the new interpretation.
The regression tests need minor corrections as well. Also update
the comments about row_security in ddl.sgml to be correct. (The
official description of the GUC in config.sgml is already correct.)
I failed to resist the temptation to do some other very minor
cleanup as well, such as getting rid of a duplicate extern declaration.
As pointed out by Michael Paquier, recovery_min_apply_delay didn't exist
in 9.0-9.3, making the release note text not very useful. Instead make it
talk about recovery_target_xid, which did exist then.
9.0 is already out of support, but we can fix the text in the newer
branches' copies of its release notes.
Empty ulink elements default to displaying the URL, so there is no need
to specify the URL again. This was already done for most occurrences,
but some cases didn't follow this convention.
Improve markup, particularly of the table of functions; add or improve
examples for some of the functions; wordsmith some of the function
descriptions.
Commit 33bd250f6c could have done with
some more review:
Adjust coding so that compilers unfamiliar with elog/ereport don't complain
about uninitialized values.
Fix misuse of PG_GETARG_INT16 to retrieve arguments declared as "integer"
at the SQL level. (This was evidently copied from cube_ll_coord and
cube_ur_coord, but those were wrong too.)
Fix non-style-guide-conforming error messages.
Fix underparenthesized if statements, which pgindent would have made a
hash of, and remove some unnecessary parens elsewhere.
Run pgindent over new code.
Revise documentation: repeated accretion of more operators without any
rethinking of the text already there had left things in a bit of a mess.
Merge all the cube operators into one table and adjust surrounding text
appropriately.
David Rowley and Tom Lane
Common mathematical convention is that exponentiation associates right to
left. We aren't going to change the parser for this, but we could note
it in the operator's description. (It's already noted in the operator
precedence/associativity table, but users might not look there.)
Per bug #13829 from Henrik Pauli.
Tone down an overly strong statement about which pseudo-types PLs are
likely to allow. Add "event_trigger" to the list, as well as
"pg_ddl_command" in 9.5/HEAD. Back-patch to 9.3 where event_trigger
was added.
Omitted boundaries represent the upper or lower limit of the corresponding
array subscript. This allows simpler specification of many common
use-cases.
(Revised version of commit 9246af6799)
YUriy Zhuravlev
Per a recommendation from Tomas Vondra, it's more helpful to refer to
the value that determines how skewed a Gaussian or exponential
distribution is as a parameter rather than a threshold.
Since it's not quite too late to get this right in 9.5, where it was
introduced, back-patch this. Most of the patch changes only comments
and documentation, but a few pgbench messages are altered to match.
Fabien Coelho, reviewed by Michael Paquier and by me.
Introduce distance operators over cubes:
<#> taxicab distance
<-> euclidean distance
<=> chebyshev distance
Also add kNN support of those distances in GiST opclass.
Author: Stas Kelvich
Previously, -j caused the entire input file to be read in and executed as
a single command string. That's undesirable, not least because any error
causes the entire file to be regurgitated as the "failing query". Some
experimentation suggests a better rule: end the command string when we see
a semicolon immediately followed by two newlines, ie, an empty line after
a query. This serves nicely to break up the existing examples such as
information_schema.sql and system_views.sql. A limitation is that it's
no longer possible to write such a sequence within a string literal or
multiline comment in a file meant to be read with -j; but there are no
instances of such a problem within the data currently used by initdb.
(If someone does make such a mistake in future, it'll be obvious because
they'll get an unterminated-literal or unterminated-comment syntax error.)
Other than that, there shouldn't be any negative consequences; you're not
forced to end statements that way, it's just a better idea in most cases.
In passing, remove src/include/tcop/tcopdebug.h, which is dead code
because it's not included anywhere, and hasn't been for more than
ten years. One of the debug-support symbols it purported to describe
has been unreferenced for at least the same amount of time, and the
other is removed by this commit on the grounds that it was useless:
forcing -j mode all the time would have broken initdb. The lack of
complaints about that, or about the missing inclusion, shows that
no one has tried to use TCOP_DONTUSENEWLINE in many years.
Clarify that SELECT policies are now applied when SELECT rights
are required for a given query, even if the query is an UPDATE or
DELETE query. Pointed out by Noah.
Additionally, note the risk regarding concurrently open transactions
where a relation which controls access to the rows of another relation
are updated and the rows of the primary relation are also being
modified. Pointed out by Peter Geoghegan.
Back-patch to 9.5.
This has worked that way for a long time, maybe always, but you would
not have known it from the documentation. Also back-patch the notes
I added to HEAD earlier today about behavior of the "-f -" switch,
which likewise have been valid for many releases.
Commit d5563d7df9 drew complaints from Coverity, which quite
correctly complained that one copy of each -c or -f string was being
leaked. What's more, simple_action_list_append was allocating enough space
for still a third copy of each string as part of the SimpleActionListCell,
even though that coding method had been superseded by a separate strdup
operation. There were some other minor coding infelicities too. The
documentation needed more work as well, eg it forgot to explain that -c
causes psql not to accept any interactive input.
To support this, we must reconcile some historical anomalies in the
behavior of -c. In particular, as a backward-incompatibility, -c no
longer implies --no-psqlrc.
Pavel Stehule (code) and Catalin Iacob (documentation). Review by
Michael Paquier and myself. Proposed behavior per Tom Lane.
Commit e7cb7ee145 provided basic
infrastructure for allowing a foreign data wrapper or custom scan
provider to replace a join of one or more tables with a scan.
However, this infrastructure failed to take into account the need
for possible EvalPlanQual rechecks, and ExecScanFetch would fail
an assertion (or just overwrite memory) if such a check was attempted
for a plan containing a pushed-down join. To fix, adjust the EPQ
machinery to skip some processing steps when scanrelid == 0, making
those the responsibility of scan's recheck method, which also has
the responsibility in this case of correctly populating the relevant
slot.
To allow foreign scans to gain control in the right place to make
use of this new facility, add a new, optional RecheckForeignScan
method. Also, allow a foreign scan to have a child plan, which can
be used to correctly populate the slot (or perhaps for something
else, but this is the only use currently envisioned).
KaiGai Kohei, reviewed by Robert Haas, Etsuro Fujita, and Kyotaro
Horiguchi.
Commit d04c8ed904 added another support function to the GIST API,
but overlooked mentioning it in xindex.sgml's summary of index support
functions.
Anastasia Lubennikova
In commit 1ea0c73c2 I added a section to user-manag.sgml about how to drop
roles that own objects; but as pointed out by Stephen Frost, I neglected
that shared objects (databases or tablespaces) may need special treatment.
Fix that. Back-patch to supported versions, like the previous patch.
Allow pg_rewind to work when target timeline was switched. Now
user can return promoted standby to old master.
Target timeline history becomes a global variable. Index
in target timeline history is used in function interfaces instead of
specifying TLI directly. Thus, SimpleXLogPageRead() can easily start
reading XLOGs from next timeline when current timeline ends.
Author: Alexander Korotkov
Review: Michael Paquier
Previously, if no host information had been specified at connection time,
PQhost() would return NULL (unless you are on Windows, in which case you
got "localhost"). This is an unhelpful definition for a couple of reasons:
it can cause corner-case crashes in applications (cf commit c5ef8ce53d),
and there's no well-defined way for applications to find out the socket
directory path that's actually in use. As an example of the latter
problem, psql substituted DEFAULT_PGSOCKET_DIR for NULL in a couple of
places, but this is subtly wrong because it's conceivable that psql is
using a libpq shared library that was built with a different setting.
Hence, change PQhost() to return DEFAULT_PGSOCKET_DIR when appropriate,
and strip out the now-dead substitutions in psql. (There is still one
remaining reference to DEFAULT_PGSOCKET_DIR in psql, in prompt.c, which
I don't see a nice way to get rid of. But it only controls a prompt
abbreviation decision, so it seems noncritical.)
Also update the docs for PQhost, which had never previously mentioned
the possibility of a socket directory path being returned. In passing
fix the outright-incorrect code comment about PGconn.pgunixsocket.
