We used to claim to support platforms using 'q' or 'I64' as the printf
length modifier for long long int, by dint of replacing snprintf with
our own code which uses the C99 standard 'll' modifier. But that is
only adequate if we use INT64_MODIFIER only in snprintf-based calls,
not directly with the platform's native printf or fprintf. Which
hasn't been the case for years. We had not noticed, partially because
of inadequate test coverage, and partially because the buildfarm is
almost completely bare of machines that won't take 'll'. The last
one seems to have been frogmouth, which was adjusted recently so that
it will take 'll'. We might as well just give up on the pretense
that anything else works, and save ourselves some configure cycles.
Discussion: https://postgr.es/m/13103.1526749980@sss.pgh.pa.us
Discussion: https://postgr.es/m/24769.1526772680@sss.pgh.pa.us
ARMv8 introduced special CPU instructions for calculating CRC-32C. Use
them, when available, for speed.
Like with the similar Intel CRC instructions, several factors affect
whether the instructions can be used. The compiler intrinsics for them must
be supported by the compiler, and the instructions must be supported by the
target architecture. If the compilation target architecture does not
support the instructions, but adding "-march=armv8-a+crc" makes them
available, then we compile the code with a runtime check to determine if
the host we're running on supports them or not.
For the runtime check, use glibc getauxval() function. Unfortunately,
that's not very portable, but I couldn't find any more portable way to do
it. If getauxval() is not available, the CRC instructions will still be
used if the target architecture supports them without any additional
compiler flags, but the runtime check will not be available.
Original patch by Yuqi Gu, heavily modified by me. Reviewed by Andres
Freund, Thomas Munro.
Discussion: https://www.postgresql.org/message-id/HE1PR0801MB1323D171938EABC04FFE7FA9E3110%40HE1PR0801MB1323.eurprd08.prod.outlook.com
We already do this for Perl and some other interesting tools, so it
seems sensible to do it for Python as well, especially since the
sub-release number is never determinable from other configure output
and even the major/minor numbers may not be clear without excavation
in config.log.
While at it, get rid of the code's assumption that both the major and
minor numbers contain exactly one digit. That will foreseeably be
broken by Python 3.10 in perhaps four or five years. That's far enough
out that we probably don't need to back-patch this.
Discussion: https://postgr.es/m/2186.1522681145@sss.pgh.pa.us
LLVM will be used for *optional* Just-in-time compilation
support. This commit just adds the configure infrastructure that
detects LLVM.
No documentation has been added for the --with-llvm flag, that'll be
added after the actual supporting code has been added.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
This is an optional dependency. It'll be used for the upcoming LLVM
based just in time compilation support, which needs to wrap a few LLVM
C++ APIs so they're accessible from C..
For now test for C++ compilers unconditionally, without failing if not
present, to ensure wide buildfarm coverage. If we're bothered by the
additional test times (which are quite short) or verbosity, we can
later make the tests conditional on --with-llvm.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
The new macro allows to test flags for different compilers and to
store them in different CFLAG like variables. The existing
PGAC_PROG_CC_CFLAGS_OPT and PGAC_PROG_CC_VAR_OPT are changed to be
just wrappers around the new function.
This'll be used by the upcoming LLVM support, to separately detect
capabilities used by clang, when generating bitcode.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
On Sparc64, use of __attribute__(aligned(8)) with __int128 causes faulty
code generation in gcc versions at least through 5.5.0. We can work around
that by disabling use of __int128, so teach configure to test for the bug.
This solution doesn't fix things for the case of cross-compiling with a
buggy compiler; to support that nicely, we'd need to add a manual disable
switch. Unless more such cases turn up, it doesn't seem worth the work.
Affected users could always edit pg_config.h manually.
In passing, fix some typos in the existing configure test for __int128.
They're harmless because we only compile that code not run it, but
they're still confusing for anyone looking at it closely.
This is needed in support of commit 751804998, so back-patch to 9.5
as that was.
Marina Polyakova, Victor Wagner, Tom Lane
Discussion: https://postgr.es/m/0d3a9fa264cebe1cb9966f37b7c06e86@postgrespro.ru
On some systems the results of 64 bit __builtin_mul_overflow()
operations can be computed at compile time, but not at runtime. The
known cases are arm buildfar animals using clang where the runtime
operation is implemented in a unavailable function.
Try to avoid compile-time computation by using volatile arguments to
__builtin_mul_overflow(). In that case we hopefully will get a link
error when unavailable, similar to what buildfarm animals dangomushi
and gull are reporting.
Author: Andres Freund
Discussion: https://postgr.es/m/20171213213754.pydkyjs6bt2hvsdb@alap3.anarazel.de
Commit 9fa6f00b1 assumed that __builtin_constant_p("string literal")
is TRUE, if the compiler has that function at all. Buildfarm results
show that Sun Studio 12, at least, breaks that assumption. Removing
that usage would leave us with no mechanical check for a very fragile
coding requirement, so instead teach configure to ignore
__builtin_constant_p() if it doesn't behave that way. We could
complicate matters by distinguishing three cases (no such function,
vs does, vs doesn't work for string literals); but for now, that seems
unnecessary because our other existing uses of this function are just
fairly minor optimizations of non-returning elog/ereport. We can live
without that on the small population of compilers that act this way.
Discussion: https://postgr.es/m/22997.1513264066@sss.pgh.pa.us
It's not easy to get signed integer overflow checks correct and
fast. Therefore abstract the necessary infrastructure into a common
header providing addition, subtraction and multiplication for 16, 32,
64 bit signed integers.
The new macros aren't yet used, but a followup commit will convert
several open coded overflow checks.
Author: Andres Freund, with some code stolen from Greg Stark
Reviewed-By: Robert Haas
Discussion: https://postgr.es/m/20171024103954.ztmatprlglz3rwke@alap3.anarazel.de
Commits 5a5c2feca3 and
b5178c5d08 introduced support for modern
MSVC-built, 32-bit Perl, but they broke use of MinGW-built, 32-bit Perl
distributions like Strawberry Perl and modern ActivePerl. Perl has no
robust means to report whether it expects a -D_USE_32BIT_TIME_T ABI, so
test this. Back-patch to 9.3 (all supported versions).
The chief alternative was a heuristic of adding -D_USE_32BIT_TIME_T when
$Config{gccversion} is nonempty. That banks on every gcc-built Perl
using the same ABI. gcc could change its default ABI the way MSVC once
did, and one could build Perl with gcc and the non-default ABI.
The GNU make build system could benefit from a similar test, without
which it does not support MSVC-built Perl. For now, just add a comment.
Most users taking the special step of building Perl with MSVC probably
build PostgreSQL with MSVC.
Discussion: https://postgr.es/m/20171130041441.GA3161526@rfd.leadboat.com
This is necessary for ActivePerl 5.18 onwards and for Strawberry Perl.
It is not sufficient for 32-bit builds with newer Visual Studio; these
fail with error LINK2026. Back-patch to 9.3 (all supported versions).
Reported by Victor Wagner.
Discussion: https://postgr.es/m/20160326154321.7754ab8f@wagner.wagner.home
Since some preparation work had already been done, the only source
changes left were changing empty-element tags like <xref linkend="foo">
to <xref linkend="foo"/>, and changing the DOCTYPE.
The source files are still named *.sgml, but they are actually XML files
now. Renaming could be considered later.
In the build system, the intermediate step to convert from SGML to XML
is removed. Everything is build straight from the source files again.
The OpenSP (or the old SP) package is no longer needed.
The documentation toolchain instructions are updated and are much
simpler now.
Peter Eisentraut, Alexander Lakhin, Jürgen Purtz
Our initial work with int128 neglected alignment considerations, an
oversight that came back to bite us in bug #14897 from Vincent Lachenal.
It is unsurprising that int128 might have a 16-byte alignment requirement;
what's slightly more surprising is that even notoriously lax Intel chips
sometimes enforce that.
Raising MAXALIGN seems out of the question: the costs in wasted disk and
memory space would be significant, and there would also be an on-disk
compatibility break. Nor does it seem very practical to try to allow some
data structures to have more-than-MAXALIGN alignment requirement, as we'd
have to push knowledge of that throughout various code that copies data
structures around.
The only way out of the box is to make type int128 conform to the system's
alignment assumptions. Fortunately, gcc supports that via its
__attribute__(aligned()) pragma; and since we don't currently support
int128 on non-gcc-workalike compilers, we shouldn't be losing any platform
support this way.
Although we could have just done pg_attribute_aligned(MAXIMUM_ALIGNOF) and
called it a day, I did a little bit of extra work to make the code more
portable than that: it will also support int128 on compilers without
__attribute__(aligned()), if the native alignment of their 128-bit-int
type is no more than that of int64.
Add a regression test case that exercises the one known instance of the
problem, in parallel aggregation over a bigint column.
This will need to be back-patched, along with the preparatory commit
91aec93e6. But let's see what the buildfarm makes of it first.
Discussion: https://postgr.es/m/20171110185747.31519.28038@wrigleys.postgresql.org
Upcoming patches are going to address performance issues that involve
slow system provided ntohs/htons etc. To address that expand
pg_bswap.h to provide pg_ntoh{16,32,64}, pg_hton{16,32,64} and
optimize their respective implementations by using compiler intrinsics
for gcc compatible compilers and msvc. Fall back to manual
implementations using shifts etc otherwise.
Additionally remove multiple evaluation hazards from the existing
BSWAP32/64 macros, by replacing them with inline functions when
necessary. In the course of that the naming scheme is changed to
pg_bswap16/32/64.
Author: Andres Freund
Discussion: https://postgr.es/m/20170927172019.gheidqy6xvlxb325@alap3.anarazel.de
Commit 3c163a7fc's original choice to ignore all #define symbols whose
names begin with underscore turns out to be too simplistic. On Windows,
some Perl installations are built with -D_USE_32BIT_TIME_T, and we must
absorb that or we get the wrong result for sizeof(PerlInterpreter).
This effectively re-reverts commit ef58b87df, which injected that symbol
in a hacky way, making it apply to all of Postgres not just PL/Perl.
More significantly, it did so on *all* 32-bit Windows builds, even when
the Perl build to be used did not select this option; so that it fails
to work properly with some newer Perl builds.
By making this change, we would be introducing an ABI break in 32-bit
Windows builds; but fortunately we have not used type time_t in any
exported Postgres APIs in a long time. So it should be OK, both for
PL/Perl itself and for third-party extensions, if an extension library
is built with a different _USE_32BIT_TIME_T setting than the core code.
Patch by me, based on research by Ashutosh Sharma and Robert Haas.
Back-patch to all supported branches, as commit 3c163a7fc was.
Discussion: https://postgr.es/m/CANFyU97OVQ3+Mzfmt3MhuUm5NwPU=-FtbNH5Eb7nZL9ua8=rcA@mail.gmail.com
Peter Eisentraut noted that commit 40b9f1921 had broken a configure
behavior that some people might rely on: AC_CHECK_PROGS(FOO,...) will
allow the search to be overridden by specifying a value for FOO on
configure's command line or in its environment, but AC_PATH_PROGS(FOO,...)
accepts such an override only if it's an absolute path. We had worked
around that behavior for some, but not all, of the pre-existing uses
of AC_PATH_PROGS by just skipping the macro altogether when FOO is
already set. Let's standardize on that workaround for all uses of
AC_PATH_PROGS, new and pre-existing, by wrapping AC_PATH_PROGS in a
new macro PGAC_PATH_PROGS. While at it, fix a deficiency of the old
workaround code by making sure we report the setting to configure's log.
Eventually I'd like to improve PGAC_PATH_PROGS so that it converts
non-absolute override inputs to absolute form, eg "PYTHON=python3"
becomes, say, PYTHON = /usr/bin/python3. But that will take some
nontrivial coding so it doesn't seem like a thing to do in late beta.
Discussion: https://postgr.es/m/90a92a7d-938e-507a-3bd7-ecd2b4004689@2ndquadrant.com
Previously we had a mix of uses of AC_CHECK_PROG[S] and AC_PATH_PROG[S].
The only difference between those macros is that the latter emits the
full path to the program it finds, eg "/usr/bin/prove", whereas the
former emits just "prove". Let's standardize on always emitting the
full path; this is better for documentation of the build, and it might
prevent some types of failures if later build steps are done with
a different PATH setting.
I did not touch the AC_CHECK_PROG[S] calls in ax_pthread.m4 and
ax_prog_perl_modules.m4. There seems no need to make those diverge from
upstream, since we do not record the programs sought by the former, while
the latter's call to AC_CHECK_PROG(PERL,...) will never be reached.
Discussion: https://postgr.es/m/25937.1501433410@sss.pgh.pa.us
The Perl documentation is very clear that stuff calling libperl should
be built with the compiler switches shown by Perl's $Config{ccflags}.
We'd been ignoring that up to now, and mostly getting away with it,
but recent Perl versions contain ABI compatibility cross-checks that
fail on some builds because of this omission. In particular the
sizeof(PerlInterpreter) can come out different due to some fields being
added or removed; which means we have a live ABI hazard that we'd better
fix rather than continuing to sweep it under the rug.
However, it still seems like a bad idea to just absorb $Config{ccflags}
verbatim. In some environments Perl was built with a different compiler
that doesn't even use the same switch syntax. -D switch syntax is pretty
universal though, and absorbing Perl's -D switches really ought to be
enough to fix the problem.
Furthermore, Perl likes to inject stuff like -D_LARGEFILE_SOURCE and
-D_FILE_OFFSET_BITS=64 into $Config{ccflags}, which affect libc ABIs on
platforms where they're relevant. Adopting those seems dangerous too.
It's unclear whether a build wherein Perl and Postgres have different ideas
of sizeof(off_t) etc would work, or whether anyone would care about making
it work. But it's dead certain that having different stdio ABIs in
core Postgres and PL/Perl will not work; we've seen that movie before.
Therefore, let's also ignore -D switches for symbols beginning with
underscore. The symbols that we actually need to import should be the ones
mentioned in perl.h's PL_bincompat_options stanza, and none of those start
with underscore, so this seems likely to work. (If it turns out not to
work everywhere, we could consider intersecting the symbols mentioned in
PL_bincompat_options with the -D switches. But that will be much more
complicated, so let's try this way first.)
This will need to be back-patched, but first let's see what the
buildfarm makes of it.
Ashutosh Sharma, some adjustments by me
Discussion: https://postgr.es/m/CANFyU97OVQ3+Mzfmt3MhuUm5NwPU=-FtbNH5Eb7nZL9ua8=rcA@mail.gmail.com
The TAP tests mostly don't work without IPC::Run, and the reason for
the failure is not immediately obvious from the error messages you get.
So teach configure to reject --enable-tap-tests unless IPC::Run exists.
Mostly this just involves adding ax_prog_perl_modules.m4 from the GNU
autoconf archives.
This was discussed last year, but we held off on the theory that we might
be switching to CMake soon. That's evidently not happening for v10,
so let's absorb this now.
Eugene Kazakov and Michael Paquier
Discussion: https://postgr.es/m/56BDDC20.9020506@postgrespro.ru
Discussion: https://postgr.es/m/CAB7nPqRVKG_CR4Dy_AMfE6DXcr6F7ygy2goa2atJU4XkerDRUg@mail.gmail.com
All documentation is now built using XSLT. Remove all references to
Jade, DSSSL, also JadeTex and some other outdated tooling.
For chunked HTML builds, this changes nothing, but removes the
transitional "oldhtml" target. The single-page HTML build is ported
over to XSLT. For PDF builds, this removes the JadeTex builds and moves
the FOP builds in their place.
copyObject() is declared to return void *, which allows easily assigning
the result independent of the input, but it loses all type checking.
If the compiler supports typeof or something similar, cast the result to
the input type. This creates a greater amount of type safety. In some
cases, where the result is assigned to a generic type such as Node * or
Expr *, new casts are now necessary, but in general casts are now
unnecessary in the normal case and indicate that something unusual is
happening.
Reviewed-by: Mark Dilger <hornschnorter@gmail.com>
Add a column collprovider to pg_collation that determines which library
provides the collation data. The existing choices are default and libc,
and this adds an icu choice, which uses the ICU4C library.
The pg_locale_t type is changed to a union that contains the
provider-specific locale handles. Users of locale information are
changed to look into that struct for the appropriate handle to use.
Also add a collversion column that records the version of the collation
when it is created, and check at run time whether it is still the same.
This detects potentially incompatible library upgrades that can corrupt
indexes and other structures. This is currently only supported by
ICU-provided collations.
initdb initializes the default collation set as before from the `locale
-a` output but also adds all available ICU locales with a "-x-icu"
appended.
Currently, ICU-provided collations can only be explicitly named
collations. The global database locales are still always libc-provided.
ICU support is enabled by configure --with-icu.
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
We had some AC_CHECK_HEADER tests that were really wastes of cycles,
because the code proceeded to #include those headers unconditionally
anyway, in all or a large majority of cases. The lack of complaints
shows that those headers are available on every platform of interest,
so we might as well let configure run a bit faster by not probing
those headers at all.
I suspect that some of the tests I left alone are equally useless, but
since all the existing #includes of the remaining headers are properly
guarded, I didn't touch them.
Commit 04aad4018 added this check after the search for a Python shared
library, which seems to me to be a pretty unfriendly ordering. The
search might fail for what are basically version-related reasons, and
in such a case it'd be better to say "your Python is too old" than
"could not find shared library for Python".
There is no specific reason for this right now, but keeping support for
old Python versions around indefinitely increases the maintenance
burden. The oldest supported Python version is now Python 2.4, which is
still shipped in RHEL/CentOS 5 by default.
In configure, add a check for the required Python version and give a
friendly error message for an old version, instead of relying on an
obscure build error later on.
On buildfarm member cockatiel, that library is in /usr/bin.
(Possibly we should look at $PATH on this platform?)
Per off-list report from Andrew Dunstan.
Per discussion with Andrew Dunstan, it seems there are three peculiarities
of the Python installation on MinGW (or at least, of the instance on
buildfarm member frogmouth). First, the library name doesn't contain
"2.7" but just "27". It looks like we can deal with that by consulting
get_config_vars('VERSION') to see whether a dot should be used or not.
Second, the library might be in c:/Windows/System32, analogously to it
possibly being in /usr/lib on Unix-oid platforms. Third, it's apparently
not standard to use the prefix "lib" on the file name. This patch will
accept files with or without "lib", but the first part of that may well
be dead code.
Most Unix-oid platforms provide a symlink "libfoo.so" -> "libfoo.so.n.n"
to allow the linker to resolve a reference "-lfoo" to a version-numbered
shared library. OpenBSD has apparently hacked ld(1) to do this internally,
because there are no such symlinks to be found in their library
directories. Tweak the new code in PGAC_CHECK_PYTHON_EMBED_SETUP to cope.
Per buildfarm member curculio.
Older versions of Python produce garbage (or at least useless) values of
get_config_vars('LDLIBRARY'). Newer versions produce garbage (or at least
useless) values of get_config_vars('SO'), which was defeating our configure
logic that attempted to identify where the Python shlib really is. The net
result, at least with a stock Python 3.5 installation on macOS, was that
we were linking against a static library in the mistaken belief that it was
a shared library. This managed to work, if you count statically absorbing
libpython into plpython.so as working. But it no longer works as of commit
d51924be8, because now we get separate static copies of libpython in
plpython.so and hstore_plpython.so, and those can't interoperate on the
same data. There are some other infelicities like assuming that nobody
ever installs a private version of Python on a macOS machine.
Hence, forget about looking in $python_configdir for the Python shlib;
as far as I can tell no version of Python has ever put one there, and
certainly no currently-supported version does. Also, rather than relying
on get_config_vars('SO'), just try all the possibilities for shlib
extensions. Also, rather than trusting Py_ENABLE_SHARED, believe we've
found a shlib only if it has a recognized extension. Last, explicitly
cope with the possibility that the shlib is really in /usr/lib and
$python_libdir is a red herring --- this is the actual situation on older
macOS, but we were only accidentally working with it.
Discussion: <5300.1475592228@sss.pgh.pa.us>
Using exit() requires stdlib.h, which is not included. Use return
instead. Also add return type for main().
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>
We weren't terribly consistent about whether to call Apple's OS "OS X"
or "Mac OS X", and the former is probably confusing to people who aren't
Apple users. Now that Apple has rebranded it "macOS", follow their lead
to establish a consistent naming pattern. Also, avoid the use of the
ancient project name "Darwin", except as the port code name which does not
seem desirable to change. (In short, this patch touches documentation and
comments, but no actual code.)
I didn't touch contrib/start-scripts/osx/, either. I suspect those are
obsolete and due for a rewrite, anyway.
I dithered about whether to apply this edit to old release notes, but
those were responsible for quite a lot of the inconsistencies, so I ended
up changing them too. Anyway, Apple's being ahistorical about this,
so why shouldn't we be?
awk's equality-comparison operator is "==" not "=". We got this right
in many places, but not in configure's checks for supported version
numbers of flex and perl. It hadn't been noticed because unsupported
versions are so old as to be basically extinct in the wild, and because
the only consequence is whether or not a WARNING flies by during
configure.
Daniel Gustafsson noted the problem with respect to the test for flex,
I found the other by reviewing other awk calls.
Previously, we included <xlocale.h> only if necessary to get the definition
of type locale_t. According to notes in PGAC_TYPE_LOCALE_T, this is
important because on some versions of glibc that file supplies an
incompatible declaration of locale_t. (This info may be obsolete, because
on my RHEL6 box that seems to be the *only* definition of locale_t; but
there may still be glibc's in the wild for which it's a live concern.)
It turns out though that on FreeBSD and maybe other BSDen, you can get
locale_t from stdlib.h or locale.h but mbstowcs_l() and friends only from
<xlocale.h>. This was leaving us compiling calls to mbstowcs_l() and
friends with no visible prototype, which causes a warning and could
possibly cause actual trouble, since it's not declared to return int.
Hence, adjust the configure checks so that we'll include <xlocale.h>
either if it's necessary to get type locale_t or if it's necessary to
get a declaration of mbstowcs_l().
Report and patch by Aleksander Alekseev, somewhat whacked around by me.
Back-patch to all supported branches, since we have been using
mbstowcs_l() since 9.1.
Commit e2609323e set the minimum Tcl version we support to 8.4, but
I forgot to adjust the documentation to say the same. Some nosing
around for other consequences found that the configure script could
be simplified slightly as well.
Per buildfarm member anchovy, 2.6.0 exists in the wild now.
Hopefully it works with Postgres; if not, we'll have to do something
about that, but in any case claiming it's "too old" is pretty silly.
This is like BSWAP32, but for 64-bit values. Since we've got two of
them now and they have use cases (like sortsupport) beyond CRCs, move
the definitions to their own header file.
Peter Geoghegan
Remove configure's checks for HAVE_POSIX_SIGNALS, HAVE_SIGPROCMASK, and
HAVE_SIGSETJMP. These APIs are required by the Single Unix Spec v2
(POSIX 1997), which we generally consider to define our minimum required
set of Unix APIs. Moreover, no buildfarm member has reported not having
them since 2012 or before, which means that even if the code is still live
somewhere, it's untested --- and we've made plenty of signal-handling
changes of late. So just take these APIs as given and save the cycles for
configure probes for them.
However, we can't remove as much C code as I'd hoped, because the Windows
port evidently still uses the non-POSIX code paths for signal masking.
Since we're largely emulating these BSD-style APIs for Windows anyway, it
might be a good thing to switch over to POSIX-like notation and thereby
remove a few more #ifdefs. But I'm not in a position to code or test that.
In the meantime, we can at least make things a bit more transparent by
testing for WIN32 explicitly in these places.
With optimizations enabled at least one compiler, clang 3.7, optimized
away the crc intrinsics knowing that the result went on unused and has
no side effects. That can trigger errors in code generation when the
intrinsic is used, as we chose to use the intrinsics without any
additional compiler flag. Return the computed value to prevent that.
With some more pedantic warning flags (-Wold-style-definition) the
configure test failed to recognize the existence of _mm_crc32_u*
intrinsics due to an independent warning in the test because the test
turned on -Werror, but that's not actually needed here.
Discussion: 20150814092039.GH4955@awork2.anarazel.de
Backpatch: 9.5, where the use of crc intrinsics was integrated.
So far we have worked around the fact that some very old compilers do
not support 'inline' functions by only using inline functions
conditionally (or not at all). Since such compilers are very rare by
now, we have decided to rely on inline functions from 9.6 onwards.
To avoid breaking these old compilers inline is defined away when not
supported. That'll cause "function x defined but not used" type of
warnings, but since nobody develops on such compilers anymore that's
ok.
This change in policy will allow us to more easily employ inline
functions.
I chose to remove code previously conditional on PG_USE_INLINE as it
seemed confusing to have code dependent on a define that's always
defined.
Blacklisting of compilers, like in c53f73879f, now has to be done
differently. A platform template can define PG_FORCE_DISABLE_INLINE to
force inline to be defined empty.
Discussion: 20150701161447.GB30708@awork2.anarazel.de
The current version is adding a spurious -pthread option on some Darwin
systems that don't need it, which leads to a bunch of "unrecognized option
'-pthread'" warnings. There is a proposed fix for that in the upstream
autoconf archive's bug tracker, see https://savannah.gnu.org/patch/?8186.
This commit updates our version of ax_pthread.m4 to the "draft2" version
proposed there by Daniel Richard G. I'm using our buildfarm to help Daniel
to test this, before he commits this to the upstream repository.
Per a suggestion from Tom Lane. Back-patch to 9.0 (all supported
versions). While only 9.4 and up have code known to elicit this
compiler bug, we were disabling inlining by accident until commit
43d89a23d5.
Our version was different from the upstream version in that we tried to use
all possible pthread-related flags that the compiler accepts, rather than
just the first one that works. That change was made in commit
e48322a6d6, to work-around a bug affecting GCC
versions 3.2 and below (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=8888),
although we didn't realize that it was a GCC bug at the time. We hardly care
about that old GCC versions anymore, so we no longer need that workaround.
This fixes the macro for compilers that print warnings with the chosen
flags. That's pretty annoying on its own right, but it also inconspicuously
disabled thread-safety, because we refused to use any pthread-related flags
if the compiler produced warnings. Max Filippov reported that problem when
linking with uClibc and OpenSSL. The warnings-check was added because the
workaround for the GCC bug caused warnings otherwise, so it's no longer
needed either. We can just use the upstream version as is.
If you really want to compile with GCC version 3.2 or older, you can still
work-around it manually by setting PTHREAD_CFLAGS="-pthread -lpthread"
manually on the configure command line.
Backpatch to 9.5. I don't want to unnecessarily rock the boat on stable
branches, but 9.5 seems like fair game.
AC_TRY_COMPILE(...) -> AC_COMPILE_IFELSE([AC_LANG_PROGRAM(...)])
AC_TRY_LINK(...) -> AC_LINK_IFELSE([AC_LANG_PROGRAM(...)])
AC_TRY_RUN(...) -> AC_RUN_IFELSE([AC_LANG_PROGRAM(...)])
AC_LANG_SAVE/RESTORE -> AC_LANG_PUSH/POP
AC_DECL_SYS_SIGLIST -> AC_CHECK_DECLS(...) (per snippet in autoconf manual)
Also use AC_LANG_SOURCE instead of AC_LANG_PROGRAM, where the main()
function is not needed.
With these changes, autoconf -Wall doesn't complain anymore.
Andreas Karlsson
According to recent tests, this case now works fine, so there's no reason
to reject it anymore. (Even if there are still some OpenBSD platforms
in the wild where it doesn't work, removing the check won't break any case
that worked before.)
We can actually remove the entire test that discovers whether libpython
is threaded, since without the OpenBSD case there's no need to know that
at all.
Per report from Davin Potts. Back-patch to all active branches.
By converting to using forward slashes at configure time we avoid
having to repeat the logic anywhere that this is needed, such as
in transforms modules for plpython.
For building PL/Perl, PL/Python, and PL/Tcl, we need a shared library of
libperl, libpython, and libtcl, respectively. Previously, this was
checked in the makefiles, skipping the PL build with a warning if no
shared library was available. Now this is checked in configure, with an
error if no shared library is available.
The previous situation arose because in the olden days, the configure
options --with-perl, --with-python, and --with-tcl controlled whether
frontend interfaces for those languages would be built. The procedural
languages were added later, and shared libraries were often not
available in the beginning. So it was decided skip the builds of the
procedural languages in those cases. The frontend interfaces have since
been removed from the tree, and shared libraries are now available most
of the time, so that setup makes much less sense now.
Also, the new setup allows contrib modules and pgxs users to rely on the
respective PLs being available based on configure flags.
Eliminate the separate 'len' variable from the loops, and also use the 4
byte instruction. This shaves off a few more cycles. Even though this
routine that uses the special SSE 4.2 instructions is much faster than a
generic routine, it's still a hot spot, so let's make it as fast as
possible.
Change the configure test to not test _mm_crc32_u64. That variant is only
available in the 64-bit x86-64 architecture, not in 32-bit x86. Modify
pg_comp_crc32c_sse42 so that it only uses _mm_crc32_u64 on x86-64. With
these changes, the SSE accelerated CRC-32C implementation can also be used
on 32-bit x86 systems.
This also fixes the 32-bit MSVC build.
Modern x86 and x86-64 processors with SSE 4.2 support have special
instructions, crc32b and crc32q, for calculating CRC-32C. They greatly
speed up CRC calculation.
Whether the instructions can be used or not depends on the compiler and the
target architecture. If generation of SSE 4.2 instructions is allowed for
the target (-msse4.2 flag on gcc and clang), use them. If they are not
allowed by default, but the compiler supports the -msse4.2 flag to enable
them, compile just the CRC-32C function with -msse4.2 flag, and check at
runtime whether the processor we're running on supports it. If it doesn't,
fall back to the slicing-by-8 algorithm. (With the common defaults on
current operating systems, the runtime-check variant is what you get in
practice.)
Abhijit Menon-Sen, heavily modified by me, reviewed by Andres Freund.
We will, for the foreseeable future, not expose 128 bit datatypes to
SQL. But being able to use 128bit math will allow us, in a later patch,
to use 128bit accumulators for some aggregates; leading to noticeable
speedups over using numeric.
So far we only detect a gcc/clang extension that supports 128bit math,
but no 128bit literals, and no *printf support. We might want to expand
this in the future to further compilers; if there are any that that
provide similar support.
Discussion: 544BB5F1.50709@proxel.se
Author: Andreas Karlsson, with significant editorializing by me
Reviewed-By: Peter Geoghegan, Oskari Saarenmaa
This speeds up WAL generation and replay. The new algorithm is
significantly faster with large inputs, like full-page images or when
inserting wide rows. It is slower with tiny inputs, i.e. less than 10 bytes
or so, but the speedup with longer inputs more than make up for that. Even
small WAL records at least have 24 byte header in the front.
The output is identical to the current byte-at-a-time computation, so this
does not affect compatibility. The new algorithm is only used for the
CRC-32C variant, not the legacy version used in tsquery or the
"traditional" CRC-32 used in hstore and ltree. Those are not as performance
critical, and are usually only applied over small inputs, so it seems
better to not carry around the extra lookup tables to speed up those rare
cases.
Abhijit Menon-Sen
We had code that supposed that some platforms might offer a nonstandard
version of getpwuid_r() with only four arguments. However, the 5-argument
definition has been standardized at least since the Single Unix Spec v2,
which is our normal reference for what's portable across all Unix-oid
platforms. (What's more, this wasn't the only pre-standardization version
of getpwuid_r(); my old HPUX 10.20 box has still another signature.)
So let's just get rid of the now-useless configure step.
Several upcoming performance/scalability improvements require atomic
operations. This new API avoids the need to splatter compiler and
architecture dependent code over all the locations employing atomic
ops.
For several of the potential usages it'd be problematic to maintain
both, a atomics using implementation and one using spinlocks or
similar. In all likelihood one of the implementations would not get
tested regularly under concurrency. To avoid that scenario the new API
provides a automatic fallback of atomic operations to spinlocks. All
properties of atomic operations are maintained. This fallback -
obviously - isn't as fast as just using atomic ops, but it's not bad
either. For one of the future users the atomics ontop spinlocks
implementation was actually slightly faster than the old purely
spinlock using implementation. That's important because it reduces the
fear of regressing older platforms when improving the scalability for
new ones.
The API, loosely modeled after the C11 atomics support, currently
provides 'atomic flags' and 32 bit unsigned integers. If the platform
efficiently supports atomic 64 bit unsigned integers those are also
provided.
To implement atomics support for a platform/architecture/compiler for
a type of atomics 32bit compare and exchange needs to be
implemented. If available and more efficient native support for flags,
32 bit atomic addition, and corresponding 64 bit operations may also
be provided. Additional useful atomic operations are implemented
generically ontop of these.
The implementation for various versions of gcc, msvc and sun studio have
been tested. Additional existing stub implementations for
* Intel icc
* HUPX acc
* IBM xlc
are included but have never been tested. These will likely require
fixes based on buildfarm and user feedback.
As atomic operations also require barriers for some operations the
existing barrier support has been moved into the atomics code.
Author: Andres Freund with contributions from Oskari Saarenmaa
Reviewed-By: Amit Kapila, Robert Haas, Heikki Linnakangas and Álvaro Herrera
Discussion: CA+TgmoYBW+ux5-8Ja=Mcyuy8=VXAnVRHp3Kess6Pn3DMXAPAEA@mail.gmail.com,
20131015123303.GH5300@awork2.anarazel.de,
20131028205522.GI20248@awork2.anarazel.de
The PGAC_FUNC_SNPRINTF_SIZE_T_SUPPORT test was broken by
ce486056ec. Among others it made the UINT64_FORMAT macro to be
defined in c.h, instead of directly being defined by configure.
This lead to the replacement printf being used on all platforms for a
while. Which seems to work, because this was only used due to
different profiles ;)
Fix by relying on INT64_MODIFIER instead.
We have had INT64_FORMAT and UINT64_FORMAT for a long time, but that's not
good enough if you want something more exotic, like "%20lld".
Abhijit Menon-Sen, per Andres Freund's suggestion.
Almost ten years ago, commit e48322a6d6 broke
the logic in ACX_PTHREAD by looping through all the possible flags rather
than stopping with the first one that would work. This meant that
$acx_pthread_ok was no longer meaningful after the loop; it would usually
be "no", whether or not we'd found working thread flags. The reason nobody
noticed is that Postgres doesn't actually use any of the symbols set up
by the code after the loop. Rather than complicate things some more to
make it work as designed, let's just remove all that dead code, and thereby
save a few cycles in each configure run.
Bison >=3.0 issues warnings about
%name-prefix="base_yy"
instead of the now preferred
%name-prefix "base_yy"
but the latter doesn't work with Bison 2.3 or less. So for now we
silence the deprecation warnings.
As of Xcode 5.0, Apple isn't including the Python framework as part of the
SDK-level files, which means that linking to it might fail depending on
whether Xcode thinks you've selected a specific SDK version. According to
their Tech Note 2328, they've basically deprecated the framework method of
linking to libpython and are telling people to link to the shared library
normally. (I'm pretty sure this is in direct contradiction to the advice
they were giving a few years ago, but whatever.) Testing says that this
approach works fine at least as far back as OS X 10.4.11, so let's just
rip out the framework special case entirely. We do still need a special
case to decide that OS X provides a shared library at all, unfortunately
(I wonder why the distutils check doesn't work ...). But this is still
less of a special case than before, so it's fine.
Back-patch to all supported branches, since we'll doubtless be hearing
about this more as more people update to recent Xcode.
Usually the search would find plain "tclsh" without any trouble,
but some installations might only have the version-numbered flavor
of that program.
No compatibility problems have been reported with 8.6, so we might
as well back-patch this to all active branches.
Christoph Berg
This test used to just define an unused static inline function and check
whether that causes a warning. But newer clang versions warn about
unused static inline functions when defined inside a .c file, but not
when defined in an included header, which is the case we care about.
Change the test to cope.
Andres Freund
Since C99, it's been standard for printf and friends to accept a "z" size
modifier, meaning "whatever size size_t has". Up to now we've generally
dealt with printing size_t values by explicitly casting them to unsigned
long and using the "l" modifier; but this is really the wrong thing on
platforms where pointers are wider than longs (such as Win64). So let's
start using "z" instead. To ensure we can do that on all platforms, teach
src/port/snprintf.c to understand "z", and add a configure test to force
use of that implementation when the platform's version doesn't handle "z".
Having done that, modify a bunch of places that were using the
unsigned-long hack to use "z" instead. This patch doesn't pretend to have
gotten everyplace that could benefit, but it catches many of them. I made
an effort in particular to ensure that all uses of the same error message
text were updated together, so as not to increase the number of
translatable strings.
It's possible that this change will result in format-string warnings from
pre-C99 compilers. We might have to reconsider if there are any popular
compilers that will warn about this; but let's start by seeing what the
buildfarm thinks.
Andres Freund, with a little additional work by me
make maintainer-check was obscure and rarely called in practice, and
many breakages were missed. Fold everything that make maintainer-check
used to do into the normal build. Specifically:
- Call duplicate_oids when genbki.pl is called.
- Check for tabs in SGML files when the documentation is built.
- Run msgfmt with the -c option during the regular build. Add an
additional configure check to see whether we are using the GNU
version. (make maintainer-check probably used to fail with non-GNU
msgfmt.)
Keep maintainer-check as around as phony target for the time being in
case anyone is calling it. But it won't do anything anymore.
This is just neatnik-ism, since all the tests in the code are #ifdefs,
but we shouldn't specify symbols as "Define to 1 ..." and then not
actually define them that way.
In commit 71450d7fd6, we added code to inform
suitably-intelligent compilers that ereport() doesn't return if the elevel
is ERROR or higher. This patch extends that to elog(), and also fixes a
double-evaluation hazard that the previous commit created in ereport(),
as well as reducing the emitted code size.
The elog() improvement requires the compiler to support __VA_ARGS__, which
should be available in just about anything nowadays since it's required by
C99. But our minimum language baseline is still C89, so add a configure
test for that.
The previous commit assumed that ereport's elevel could be evaluated twice,
which isn't terribly safe --- there are already counterexamples in xlog.c.
On compilers that have __builtin_constant_p, we can use that to protect the
second test, since there's no possible optimization gain if the compiler
doesn't know the value of elevel. Otherwise, use a local variable inside
the macros to prevent double evaluation. The local-variable solution is
inferior because (a) it leads to useless code being emitted when elevel
isn't constant, and (b) it increases the optimization level needed for the
compiler to recognize that subsequent code is unreachable. But it seems
better than not teaching non-gcc compilers about unreachability at all.
Lastly, if the compiler has __builtin_unreachable(), we can use that
instead of abort(), resulting in a noticeable code savings since no
function call is actually emitted. However, it seems wise to do this only
in non-assert builds. In an assert build, continue to use abort(), so that
the behavior will be predictable and debuggable if the "impossible"
happens.
These changes involve making the ereport and elog macros emit do-while
statement blocks not just expressions, which forces small changes in
a few call sites.
Andres Freund, Tom Lane, Heikki Linnakangas
This means we can now construct a configure test for the library
presence. Previously these parameters were only figured out at
build time in plperl's GnuMakefile.
Pre-Lion versions of Apple's linker don't allow space between -F and its
argument. (Snow Leopard is nice enough to tell you that in so many words,
but older versions just fail with very obscure link errors, as seen on
buildfarm member locust for instance.) Oversight in commit
fc8745070a.
The PL/Python build on OS X was previously hardcoded to use the system
installation of Python, ignoring whatever was specified to configure.
Except that it would use the header files from configure, which could
lead to mismatches. It was not possible to build against a custom
Python installation.
Now, we check in configure how the specified Python installation was
built and use that, supporting framework and non-framework builds.
The former name was too likely to conflict with symbols from external
headers; and, as seen in recent buildfarm failures in member spoonbill,
it has now happened at least in plpython.
Currently, the macros only work with fairly recent gcc versions, but there
is room to expand them to other compilers that have comparable features.
Heavily revised and autoconfiscated version of a patch by Andres Freund.
Python can be built to have two separate include directories: one for
platform-independent files and one for platform-specific files. So
far, this has apparently never mattered for a PL/Python build. But
with the new multi-arch Python packages in Debian and Ubuntu, this is
becoming the standard configuration on these platforms, so we must
check these directories separately to be able to build there.
Also add a bit of reporting in configure to be able to see better what
is going on with this.
There was a hack put into install-sh to call strip with the correct
options on Mac OS X. But that never worked, because configure
disabled stripping on that platform altogether. So remove that dead
code, and while we're at it, update install-sh to the latest upstream
source (from Automake).
Instead, set up the right strip options in programs.m4, so this now
actually works the way it was originally intended.
The BSD-ish members of the buildfarm all seem to think removing this
was a bad idea. It looks to me like it resulted in omitting the system
header inclusion necessary to detect the fields of struct tm correctly.
ENABLE_DTRACE unused as of a7b7b07af3
HAVE_ERR_SET_MARK unused as of 4ed4b6c54e
HAVE_FCVT unused as of 4553e1d80f
HAVE_STRUCT_SOCKADDR_UN unused as of b4cea00a1f
HAVE_SYSCONF unused as of f83356c7f5
TM_IN_SYS_TIME never used, obsolescent per Autoconf documentation
PGAC_PATH_COLLATEINDEX supposed that it could use AC_PATH_PROGS to search
for collateindex.pl, but that macro will only accept files that are marked
executable, and at least some DocBook installations don't mark the script
executable (a case the docs Makefile was already prepared for). Accept the
script if it's present and readable in $DOCBOOKSTYLE/bin, and otherwise
search the PATH as before.
Having fixed that up, we don't need the fallback case that was in the docs
Makefile, and instead can throw an understandable error if configure didn't
find the script. Per recent trouble report from John Lumby.
Original patch by Lars Kanis, reviewed by Nishiyama Tomoaki and tweaked some by me.
This compiler, or at least the latest version of it, is currently broken, and
only passes the regression tests if built with -O0.
Because of ABI tagging, the library version number might no longer be
exactly the Python version number, so do extra lookups. This affects
installations without a shared library, such as ActiveState's
installer.
Also update the way to detect the location of the 'config' directory,
which can also be versioned.
Ashesh Vashi
This is reported to be necessary on some versions of that OS. In service
of this, cause PGAC_PROG_CC_CFLAGS_OPT to reject switches that result in
compiler warnings, since on yet other versions of that OS, the switch does
nothing except provoke a warning.
Report and patch by Ibrar Ahmed, further tweaking by me.
