Add a GUC that acts as a multiplier on work_mem. It gets applied when
sizing executor node hash tables that were previously size constrained
using work_mem alone.
The new GUC can be used to preferentially give hash-based nodes more
memory than the generic work_mem limit. It is intended to enable admin
tuning of the executor's memory usage. Overall system throughput and
system responsiveness can be improved by giving hash-based executor
nodes more memory (especially over sort-based alternatives, which are
often much less sensitive to being memory constrained).
The default value for hash_mem_multiplier is 1.0, which is also the
minimum valid value. This means that hash-based nodes continue to apply
work_mem in the traditional way by default.
hash_mem_multiplier is generally useful. However, it is being added now
due to concerns about hash aggregate performance stability for users
that upgrade to Postgres 13 (which added disk-based hash aggregation in
commit 1f39bce0). While the old hash aggregate behavior risked
out-of-memory errors, it is nevertheless likely that many users actually
benefited. Hash agg's previous indifference to work_mem during query
execution was not just faster; it also accidentally made aggregation
resilient to grouping estimate problems (at least in cases where this
didn't create destabilizing memory pressure).
hash_mem_multiplier can provide a certain kind of continuity with the
behavior of Postgres 12 hash aggregates in cases where the planner
incorrectly estimates that all groups (plus related allocations) will
fit in work_mem/hash_mem. This seems necessary because hash-based
aggregation is usually much slower when only a small fraction of all
groups can fit. Even when it isn't possible to totally avoid hash
aggregates that spill, giving hash aggregation more memory will reliably
improve performance (the same cannot be said for external sort
operations, which appear to be almost unaffected by memory availability
provided it's at least possible to get a single merge pass).
The PostgreSQL 13 release notes should advise users that increasing
hash_mem_multiplier can help with performance regressions associated
with hash aggregation. That can be taken care of by a later commit.
Author: Peter Geoghegan
Reviewed-By: Álvaro Herrera, Jeff Davis
Discussion: https://postgr.es/m/20200625203629.7m6yvut7eqblgmfo@alap3.anarazel.de
Discussion: https://postgr.es/m/CAH2-WzmD%2Bi1pG6rc1%2BCjc4V6EaFJ_qSuKCCHVnH%3DoruqD-zqow%40mail.gmail.com
Backpatch: 13-, where disk-based hash aggregation was introduced.
The planner is in fact willing to use hash aggregation when work_mem is
not set high enough for everything to fit in memory. This has been the
case since commit 1f39bce0, which added disk-based hash aggregation.
There are a few remaining cases in which hash aggregation is avoided as
a matter of policy when the planner surmises that spilling will be
necessary. For example, callers of choose_hashed_setop() still
conservatively avoid hash aggregation when spilling is anticipated.
That doesn't seem like a good enough reason to mention hash aggregation
in this context.
Backpatch: 13-, where disk-based hash aggregation was introduced.
This adds seven methods to the output plugin API, adding support for
streaming changes of large in-progress transactions.
* stream_start
* stream_stop
* stream_abort
* stream_commit
* stream_change
* stream_message
* stream_truncate
Most of this is a simple extension of the existing methods, with
the semantic difference that the transaction (or subtransaction)
is incomplete and may be aborted later (which is something the
regular API does not really need to deal with).
This also extends the 'test_decoding' plugin, implementing these
new stream methods.
The stream_start/start_stop are used to demarcate a chunk of changes
streamed for a particular toplevel transaction.
This commit simply adds these new APIs and the upcoming patch to "allow
the streaming mode in ReorderBuffer" will use these APIs.
Author: Tomas Vondra, Dilip Kumar, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma and Mahendra Singh Thalor
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Note: This GUC was originally named enable_hashagg_disk when it appeared
in commit 1f39bce0, which added disk-based hash aggregation. It was
subsequently renamed in commit 92c58fd9.
Author: Peter Geoghegan
Reviewed-By: Jeff Davis, Álvaro Herrera
Discussion: https://postgr.es/m/9d9d1e1252a52ea1bad84ea40dbebfd54e672a0f.camel%40j-davis.com
Backpatch: 13-, where disk-based hash aggregation was introduced.
The initial implementation of leader_pid in pg_stat_activity added by
b025f32 took the approach to strictly print what a PGPROC entry
includes. In short, if a backend has been involved in parallel query at
least once, leader_pid would remain set as long as the backend is alive.
For a parallel group leader, this means that the field would always be
set after it participated at least once in parallel query, and after
more discussions this could be confusing if using for example a
connection pooler.
This commit changes the data printed so as leader_pid becomes always
NULL for a parallel group leader, showing up a non-NULL value only for
the parallel workers, and actually as long as a parallel query is
running as workers are shut down once the query has completed.
This does not change the definition of any catalog, so no catalog bump
is needed. Per discussion with Justin Pryzby, Álvaro Herrera, Julien
Rouhaud and me.
Discussion: https://postgr.es/m/20200721035145.GB17300@paquier.xyz
Backpatch-through: 13
TLS 1.3 uses a different way of specifying ciphers and a different
OpenSSL API. PostgreSQL currently does not support setting those
ciphers. For now, just document this. In the future, support for
this might be added somehow.
Reviewed-by: Jonathan S. Katz <jkatz@postgresql.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Add infinities that behave the same as they do in the floating-point
data types. Aside from any intrinsic usefulness these may have,
this closes an important gap in our ability to convert floating
values to numeric and/or replace float-based APIs with numeric.
The new values are represented by bit patterns that were formerly
not used (although old code probably would take them for NaNs).
So there shouldn't be any pg_upgrade hazard.
Patch by me, reviewed by Dean Rasheed and Andrew Gierth
Discussion: https://postgr.es/m/606717.1591924582@sss.pgh.pa.us
The bug fixed in commit 72eab84a5 would not have occurred if initdb
had a less surprising rule about which columns should be marked
NOT NULL by default. Let's make that rule be strictly that the
column must be fixed-width and its predecessors must be fixed-width
and NOT NULL, removing the hacky and unsafe exceptions for oidvector
and int2vector.
Since we do still want all existing oidvector and int2vector columns
to be marked NOT NULL, we have to put BKI_FORCE_NOT_NULL labels on
them. But making this less magic and more documented seems like a
good idea, even if it's a shade more verbose.
I didn't bump catversion since the initial catalog contents are
not actually changed by this patch. Note however that the
contents of postgres.bki do change, and feeding an old copy of
that to a new backend will produce wrong results.
Discussion: https://postgr.es/m/204760.1595181800@sss.pgh.pa.us
The executor checks for this error, and so does the bootstrap catalog
loader, but we never checked for it in retail catalog manipulations.
The folly of that has now been exposed, so let's add assertions
checking it. Checking in CatalogTupleInsert[WithInfo] and
CatalogTupleUpdate[WithInfo] should be enough to cover this.
Back-patch to v10; the aforesaid functions didn't exist before that,
and it didn't seem worth adapting the patch to the oldest branches.
But given the risk of JIT crashes, I think we certainly need this
as far back as v11.
Pre-v13, we have to explicitly exclude pg_subscription.subslotname
and pg_subscription_rel.srsublsn from the checks, since they are
mismarked. (Even if we change our mind about applying BKI_FORCE_NULL
in the branch tips, it doesn't seem wise to have assertions that
would fire in existing databases.)
Discussion: https://postgr.es/m/298837.1595196283@sss.pgh.pa.us
The code has always set this column to NULL when it's not valid,
but the catalog header's description failed to reflect that,
as did the SGML docs, as did some of the code. To prevent future
coding errors of the same ilk, let's hide the field from C code
as though it were variable-length (which, in a sense, it is).
As with commit 72eab84a5, we can only fix this cleanly in HEAD
and v13; the problem extends further back but we'll need some
klugery in the released branches.
Discussion: https://postgr.es/m/367660.1595202498@sss.pgh.pa.us
max_slot_wal_keep_size that was added in v13 and wal_keep_segments are
the GUC parameters to specify how much WAL files to retain for
the standby servers. While max_slot_wal_keep_size accepts the number of
bytes of WAL files, wal_keep_segments accepts the number of WAL files.
This difference of setting units between those similar parameters could
be confusing to users.
To alleviate this situation, this commit renames wal_keep_segments to
wal_keep_size, and make users specify the WAL size in it instead of
the number of WAL files.
There was also the idea to rename max_slot_wal_keep_size to
max_slot_wal_keep_segments, in the discussion. But we have been moving
away from measuring in segments, for example, checkpoint_segments was
replaced by max_wal_size. So we concluded to rename wal_keep_segments
to wal_keep_size.
Back-patch to v13 where max_slot_wal_keep_size was added.
Author: Fujii Masao
Reviewed-by: Álvaro Herrera, Kyotaro Horiguchi, David Steele
Discussion: https://postgr.es/m/574b4ea3-e0f9-b175-ead2-ebea7faea855@oss.nttdata.com
There was no easy way to find how many times generic and custom plans
have been executed for a prepared statement. This commit exposes those
numbers of times in pg_prepared_statements view.
Author: Atsushi Torikoshi, Kyotaro Horiguchi
Reviewed-by: Tatsuro Yamada, Masahiro Ikeda, Fujii Masao
Discussion: https://postgr.es/m/CACZ0uYHZ4M=NZpofH6JuPHeX=__5xcDELF8hT8_2T+R55w4RQw@mail.gmail.com
Due to the layout of this catalog, subslotname has to be explicitly
marked BKI_FORCE_NULL, else initdb will default to the assumption
that it's non-nullable. Since, in fact, CREATE/ALTER SUBSCRIPTION
will store null values there, the existing marking is just wrong,
and has been since this catalog was invented.
We haven't noticed because not much in the system actually depends
on attnotnull being truthful. However, JIT'ed tuple deconstruction
does depend on that in some cases, allowing crashes or wrong answers
in queries that inspect pg_subscription. Commit 9de77b545 quite
accidentally exposed this on the buildfarm members that force JIT
activation.
Back-patch to v13. The problem goes further back, but we cannot
force initdb in released branches, so some klugier solution will
be needed there. Before working on that, push this simple fix
to try to get the buildfarm back to green.
Discussion: https://postgr.es/m/4118109.1595096139@sss.pgh.pa.us
This patch adds a "binary" option to CREATE/ALTER SUBSCRIPTION.
When that's set, the publisher will send data using the data type's
typsend function if any, rather than typoutput. This is generally
faster, if slightly less robust.
As committed, we won't try to transfer user-defined array or composite
types in binary, for fear that type OIDs won't match at the subscriber.
This might be changed later, but it seems like fit material for a
follow-on patch.
Dave Cramer, reviewed by Daniel Gustafsson, Petr Jelinek, and others;
adjusted some by me
Discussion: https://postgr.es/m/CADK3HH+R3xMn=8t3Ct+uD+qJ1KD=Hbif5NFMJ+d5DkoCzp6Vgw@mail.gmail.com
pg_dump produces custom-format archive files that lack data offsets
when it is unable to seek its output. Up to now that's been a hazard
for pg_restore. But if pg_restore is able to seek in the archive
file, there is no reason to throw up our hands when asked to restore
data blocks out of order. Instead, whenever we are searching for a
data block, record the locations of the blocks we passed over (that
is, fill in the missing data-offset fields in our in-memory copy of
the TOC data). Then, when we hit a case that requires going
backwards, we can just seek back.
Also track the furthest point that we've searched to, and seek back
to there when beginning a search for a new data block. This avoids
possible O(N^2) time consumption, by ensuring that each data block
is examined at most twice. (On Unix systems, that's at most twice
per parallel-restore job; but since Windows uses threads here, the
threads can share block location knowledge, reducing the amount of
duplicated work.)
We can also improve the code a bit by using fseeko() to skip over
data blocks during the search.
This is all of some use even in simple restores, but it's really
significant for parallel pg_restore. In that case, we require
seekability of the input already, and we will very probably need
to do out-of-order restores.
Back-patch to v12, as this fixes a regression introduced by commit
548e50976. Before that, parallel restore avoided requesting
out-of-order restores, so it would work on a data-offset-less
archive. Now it will again.
Ideally this patch would include some test coverage, but there are
other open bugs that need to be fixed before we can extend our
coverage of parallel restore very much. Plan to revisit that later.
David Gilman and Tom Lane; reviewed by Justin Pryzby
Discussion: https://postgr.es/m/CALBH9DDuJ+scZc4MEvw5uO-=vRyR2=QF9+Yh=3hPEnKHWfS81A@mail.gmail.com
When using the following functions, users could see various types of
errors of the type "cache lookup failed for OID XXX" with elog(), that
can only be used for internal errors:
* pg_describe_object()
* pg_identify_object()
* pg_identify_object_as_address()
The set of APIs managing object addresses for all object types are made
smarter by gaining a new argument "missing_ok" that allows any caller to
control if an error is raised or not on an undefined object. The SQL
functions listed above are changed to handle the case where an object is
missing.
Regression tests are added for all object types for the cases where
these are undefined. Before this commit, these cases failed with cache
lookup errors, and now they basically return NULL (minus the name of the
object type requested).
Author: Michael Paquier
Reviewed-by: Aleksander Alekseev, Dmitry Dolgov, Daniel Gustafsson,
Álvaro Herrera, Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAB7nPqSZxrSmdHK-rny7z8mi=EAFXJ5J-0RbzDw6aus=wB5azQ@mail.gmail.com
The stats with this commit was available only for WALSenders, however,
users might want to see for backends doing logical decoding via SQL API.
Then, users might want to reset and access these stats across server
restart which was not possible with the current patch.
List of commits reverted:
caa3c4242c Don't call elog() while holding spinlock.
e641b2a995 Doc: Update the documentation for spilled transaction
statistics.
5883f5fe27 Fix unportable printf format introduced in commit 9290ad198.
9290ad198b Track statistics for spilling of changes from ReorderBuffer.
Additionaly, remove the release notes entry for this feature.
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
This includes two changes:
- Addition of a new function pg_xact_commit_timestamp_origin() able, for
a given transaction ID, to return the commit timestamp and replication
origin of this transaction. An equivalent function existed in
pglogical.
- Addition of the replication origin to pg_last_committed_xact().
The commit timestamp manager includes already APIs able to return the
replication origin of a transaction on top of its commit timestamp, but
the code paths for replication origins were never stressed as those
functions have never looked for a replication origin, and the SQL
functions available have never included this information since their
introduction in 73c986a.
While on it, refactor a test of modules/commit_ts/ to use tstzrange() to
check that a transaction timestamp is within the wanted range, making
the test a bit easier to read.
Bump catalog version.
Author: Movead Li
Reviewed-by: Madan Kumar, Michael Paquier
Discussion: https://postgr.es/m/2020051116430836450630@highgo.ca
Re-point comp.ai.genetic FAQ link to a more stable address.
Remove stale links to AIX documentation; we don't really need to
tell AIX users how to use their systems.
Remove stale links to HP documentation about SSL. We've had to
update those twice before, making it increasingly obvious that
HP does not intend them to be stable landing points. They're
not particularly authoritative, either. (This change effectively
reverts bbd3bdba3.)
Daniel Gustafsson and Álvaro Herrera, per a gripe from
Kyotaro Horiguchi. Back-patch, since these links are
just as dead in the back branches.
Discussion: https://postgr.es/m/20200709.161226.204639179120026914.horikyota.ntt@gmail.com
pg_stat_activity.query text is truncated at 1024 bytes. But previously
the document described that it's truncated at 1024 characters.
This was not accurate when considering multibyte characters.
Back-patch to v10 where this inaccurate description was added.
Author: Atsushi Torikoshi
Reviewed-by: Daniel Gustafsson, Fujii Masao
Discussion: https://postgr.es/m/cd5b49a5a14e887542f5f569c1c6bde2@oss.nttdata.com
Commit f7f70d5e2 left one inconsistency behind: we're still creating
pg_type entries for the composite types of sequences and toast tables,
but not arrays over those composites. But there seems precious little
reason to have named composite types for toast tables, and not much more
to have them for sequences (especially given the thought that sequences
may someday not be standalone relations at all).
So, let's close that inconsistency by removing these composite types,
rather than adding arrays for them. This buys back a little bit of
the initial pg_type bloat added by the previous patch, and could be
a significant savings in a large database with many toast tables.
Aside from a small logic rearrangement in heap_create_with_catalog,
this patch mostly needs to clean up some places that were assuming that
pg_class.reltype always has a valid value. Those are really pre-existing
bugs, given that it's documented otherwise; notably, the plpgsql changes
fix code that gives "cache lookup failed for type 0" on indexes today.
But none of these seem interesting enough to back-patch.
Also, remove the pg_dump/pg_upgrade infrastructure for propagating
a toast table's pg_type OID into the new database, since we no longer
need that.
Discussion: https://postgr.es/m/761F1389-C6A8-4C15-80CE-950C961F5341@gmail.com
The previous definition of the column was almost universally disliked,
so provide this updated definition which is more useful for monitoring
purposes: a large positive value is good, while zero or a negative value
means danger. This should be operationally more convenient.
Backpatch to 13, where the new column to pg_replication_slots (and the
feature it represents) were added.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Discussion: https://postgr.es/m/9ddfbf8c-2f67-904d-44ed-cf8bc5916228@oss.nttdata.com
Enabling pg_stat_statements.track_plaanning may incur a noticeable
performance penalty, especially when a fewer kinds of queries are executed
on many concurrent connections. This commit documents this note.
Back-patch to v13 where pg_stat_statements.track_plaanning was added.
Suggested-by: Pavel Stehule
Author: Fujii Masao
Reviewed-by: Pavel Stehule
Discussion: https://postgr.es/m/CAFj8pRC9Jxa8r5i0TNBWLb8mzuaYzEoLq3QOvip0jVpHPOLbVA@mail.gmail.com
After running GetForeignRelSize for a foreign table, adjust rel->tuples
to be at least as large as rel->rows. This prevents bizarre behavior
in estimate_num_groups() and perhaps other places, especially in the
scenario where rel->tuples is zero because pg_class.reltuples is
(suggesting that ANALYZE has never been run for the table). As things
stood, we'd end up estimating one group out of any GROUP BY on such a
table, whereas the default group-count estimate is more likely to result
in a sane plan.
Also, clarify in the documentation that GetForeignRelSize has the option
to override the rel->tuples value if it has a better idea of what to use
than what is in pg_class.reltuples.
Per report from Jeff Janes. Back-patch to all supported branches.
Patch by me; thanks to Etsuro Fujita for review
Discussion: https://postgr.es/m/CAMkU=1xNo9cnan+Npxgz0eK7394xmjmKg-QEm8wYG9P5-CcaqQ@mail.gmail.com
Previously the document explained that restart_lsn indicates the LSN of
oldest WAL won't be automatically removed during checkpoints. But
since v13 this was no longer true thanks to max_slot_wal_keep_size.
Back-patch to v13 where max_slot_wal_keep_size was added.
Author: Fujii Masao
Discussion: https://postgr.es/m/6497f1e9-3148-c5da-7e49-b2fddad9a42f@oss.nttdata.com
Since v13 pg_stat_statements is allowed to track the planning time of
statements when track_planning option is enabled. Its default was on.
But this feature could cause more terrible spinlock contentions in
pg_stat_statements. As a result of this, Robins Tharakan reported that
v13 beta1 showed ~45% performance drop at high DB connection counts
(when compared with v12.3) during fully-cached SELECT-only test using
pgbench.
To avoid this performance regression by the default setting,
this commit changes default of pg_stat_statements.track_planning to off.
Back-patch to v13 where pg_stat_statements.track_planning was introduced.
Reported-by: Robins Tharakan
Author: Fujii Masao
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/2895b53b033c47ccb22972b589050dd9@EX13D05UWC001.ant.amazon.com
The IANA tzcode library has a feature to read a time zone file named
"posixrules" and apply the daylight-savings transition dates and times
therein, when it is given a POSIX-style time zone specification that
lacks an explicit transition rule. However, there's a problem with
that code: it doesn't work for dates past the Y2038 time_t rollover.
(Effectively, all times beyond that point are treated as standard
time.) The IANA crew regard this feature as legacy, so their plan is
to remove it not fix it. The time frame in which that will happen
is unclear, but presumably it'll happen well before 2038.
Moreover, effective with the next IANA data update (probably this
fall), the recommended default will be to not install a "posixrules"
file in the first place. The time frame in which tzdata packagers
might adopt that suggestion is likewise unclear, but at least some
platforms will probably do it in the next year or so. While we could
ignore that recommendation so far as PG-supplied tzdata trees are
concerned, builds using --with-system-tzdata will be subject to
whatever the platform's tzdata packager decides to do.
Thus, whether or not we do anything, some increasing fraction of
Postgres users will be exposed to the behavior observed when there
is no "posixrules" file; and if we do nothing, we'll have essentially
no control over the timing of that change.
The best thing to do to ameliorate the uncertainty seems to be to
proactively remove the posixrules-reading feature. If we do that in
a scheduled release then at least we can release-note the behavioral
change, rather than having users be surprised by it after a routine
tzdata update.
The change in question is fairly minor anyway: to be affected,
you have to be using a POSIX-style timezone spec, it has to not
have an explicit rule, and it has to not be one of the four traditional
continental-USA zone names (EST5EDT, CST6CDT, MST7MDT, or PST8PDT),
as those are special-cased. Since the default "posixrules" file
provides USA DST rules, the number of people who are likely to find
such a zone spec useful is probably quite small. Moreover, the
fallback behavior with no explicit rule and no "posixrules" file is to
apply current USA rules, so the only thing that really breaks is the
DST transitions in years before 2007 (and you get the countervailing
fix that transitions after 2038 will be applied).
Now, some installations might have replaced the "posixrules" file,
allowing e.g. EU rules to be applied to a POSIX-style timezone spec.
That won't work anymore. But it's not exactly clear why this solution
would be preferable to using a regular named zone. In any case, given
the Y2038 issue, we need to be pushing users to stop depending on this.
Back-patch into v13; it hasn't been released yet, so it seems OK to
change its behavior. (Personally I think we ought to back-patch
further, but I've been outvoted.)
Discussion: https://postgr.es/m/1390.1562258309@sss.pgh.pa.us
Discussion: https://postgr.es/m/20200621211855.6211-1-eggert@cs.ucla.edu
SQL:1999 had syntax
SUBSTRING(text FROM pattern FOR escapechar)
but this was replaced in SQL:2003 by the more clear
SUBSTRING(text SIMILAR pattern ESCAPE escapechar)
but this was never implemented in PostgreSQL. This patch adds that
new syntax as an alternative in the parser, and updates documentation
and tests to indicate that this is the preferred alternative now.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Discussion: https://www.postgresql.org/message-id/flat/a15db31c-d0f8-8ce0-9039-578a31758adb%402ndquadrant.com
Warnings start 10M transactions before xidStopLimit, which is 11M
transactions before wraparound. The sample WARNING output showed a
value greater than 11M, and its HINT message predated commit
25ec228ef7. Hence, the sample was
impossible. Back-patch to 9.5 (all supported versions).
When we initially created this parameter, in commit ff8ca5fad, we left
the default as "allow any protocol version" on grounds of backwards
compatibility. However, that's inconsistent with the backend's default
since b1abfec82; protocol versions prior to 1.2 are not considered very
secure; and OpenSSL has had TLSv1.2 support since 2012, so the number
of PG servers that need a lesser minimum is probably quite small.
On top of those things, it emerges that some popular distros (including
Debian and RHEL) set MinProtocol=TLSv1.2 in openssl.cnf. Thus, far
from having "allow any protocol version" behavior in practice, what
we actually have as things stand is a platform-dependent lower limit.
So, change our minds and set the min version to TLSv1.2. Anybody
wanting to connect with a new libpq to a pre-2012 server can either
set ssl_min_protocol_version=TLSv1 or accept the fallback to non-SSL.
Back-patch to v13 where the aforementioned patches appeared.
Patch by me, reviewed by Daniel Gustafsson
Discussion: https://postgr.es/m/a9408304-4381-a5af-d259-e55d349ae4ce@2ndquadrant.com
In pg_replication_slot, change output from normal/reserved/lost to
reserved/extended/unreserved/ lost, which better expresses the possible
states particularly near the time where segments are no longer safe but
checkpoint has not run yet.
Under the new definition, reserved means the slot is consuming WAL
that's still under the normal WAL size constraints; extended means it's
consuming WAL that's being protected by wal_keep_segments or the slot
itself, whose size is below max_slot_wal_keep_size; unreserved means the
WAL is no longer safe, but checkpoint has not yet removed those files.
Such as slot is in imminent danger, but can still continue for a little
while and may catch up to the reserved WAL space.
Also, there were some bugs in the calculations used to report the
status; fixed those.
Backpatch to 13.
Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200616.120236.1809496990963386593.horikyota.ntt@gmail.com
Both INDEX_CLEANUP and TRUNCATE have been available since v12, and are
enabled by default except if respectively vacuum_index_cleanup and
vacuum_truncate are disabled for a given relation. This change adds
support for disabling these options from vacuumdb.
Author: Nathan Bossart
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/6F7F17EF-B1F2-4681-8D03-BA96365717C0@amazon.com
Defining duplicates as "close by" to each other was unclear. Simplify
the definition.
Backpatch: 13-, where deduplication was introduced (by commit 0d861bbb)
911e702077 added opclass options and adjusted documentation for each
particular affected opclass. However, documentation for extendability was
not adjusted. This commit adjusts documentation for interfaces of index AMs
and opclasses.
Discussion: https://postgr.es/m/CAH2-WzmQnW6%2Bz5F9AW%2BSz%2BzEcEvXofTwh_A9J3%3D_WA-FBP0wYg%40mail.gmail.com
Author: Alexander Korotkov
Reported-by: Peter Geoghegan
Reviewed-by: Peter Geoghegan
The IANA time zone folk have deprecated use of a "posixrules" file in
the tz database. While for now it's our choice whether to keep
supplying one in our own builds, installations built with
--with-system-tzdata will soon be needing to cope with that file not
being present, at least on some platforms.
This causes a problem for the horology test, which expected the
nonstandard POSIX zone spec "CST7CDT" to apply pre-2007 US daylight
savings rules. That does happen if the posixrules file supplies such
information, but otherwise the test produces undesired results.
To fix, add an explicit transition date rule that matches 2005 practice.
(We could alternatively have switched the test to use some real time
zone, but it seems useful to have coverage of this type of zone spec.)
While at it, update a documentation example that also relied on
"CST7CDT"; use a real-world zone name instead. Also, document why
the zone names EST5EDT, CST6CDT, MST7MDT, PST8PDT aren't subject to
similar failures when "posixrules" is missing.
Back-patch to all supported branches, since the hazard is the same
for all.
Discussion: https://postgr.es/m/1665379.1592581287@sss.pgh.pa.us
Mostly in response to Jürgen Purtz critique of previous definitions,
though I added many other changes.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Jürgen Purtz <juergen@purtz.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Erik Rijkers <er@xs4all.nl>
Discussion: https://postgr.es/m/c1e06008-2132-30f4-9b38-877e8683d418@purtz.de
We'd glossed over most of this complexity for years, but it's hard
to avoid writing it all down now, so that we can explain what happens
when there's no "posixrules" file in the IANA time zone database.
That was at best a tiny minority situation till now, but it's likely
to become quite common in the future, so we'd better explain it.
Nonetheless, we don't really encourage people to use POSIX zone specs;
picking a named zone is almost always what you really want, unless
perhaps you're stuck with an out-of-date zone database. Therefore,
let's shove all this detail into an appendix.
Patch by me; thanks to Robert Haas for help with some awkward wording.
Discussion: https://postgr.es/m/1390.1562258309@sss.pgh.pa.us
Don't use fread(), since that doesn't necessarily set errno. We could
use read() instead, but it's even better to use pg_pread(), which
allows us to avoid some extra calls to seek to the desired location in
the file.
Also, advertise a wait event while reading from a file, as we do for
most other places where we're reading data from files.
Patch by me, reviewed by Hamid Akhtar.
Discussion: http://postgr.es/m/CA+TgmobBw-3573vMosGj06r72ajHsYeKtksT_oTxH8XvTL7DxA@mail.gmail.com
Our documentation failed to point out that REPEATABLE READ is really
snapshot isolation, which might be important to some users. Point to
the standard reference paper for this complicated topic.
Likewise, add a reference to the VLDB paper about PostgreSQL SSI, for
technical information about our SSI implementation and how it compares
to S2PL.
While here, add a note about catalog access using a lower isolation
level, per recent user complaint.
Back-patch to all releases.
Reported-by: Kyle Kingsbury <aphyr@jepsen.io>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Tatsuo Ishii <ishii@sraoss.co.jp>
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443%40jepsen.io
Discussion: https://postgr.es/m/16454-9408996bb1750faf%40postgresql.org
This patch removes the hardcoded check for superuser privileges when
executing replication origin functions. Instead, execution is revoked
from public, meaning that those functions can be executed by a superuser
and that access to them can be granted.
Author: Martín Marqués
Reviewed-by: Kyotaro Horiguchi, Michael Paquier, Masahiko Sawada
Discussion: https:/postgr.es/m/CAPdiE1xJMZOKQL3dgHMUrPqysZkgwzSMXETfKkHYnBAB7-0VRQ@mail.gmail.com
plpgsql has always executed the query given in a RETURN QUERY command
by opening it as a cursor and then fetching a few rows at a time,
which it turns around and dumps into the function's result tuplestore.
The point of this was to keep from blowing out memory with an oversized
SPITupleTable result (note that while a tuplestore can spill tuples
to disk, SPITupleTable cannot). However, it's rather inefficient, both
because of extra data copying and because of executor entry/exit
overhead. In recent versions, a new performance problem has emerged:
use of a cursor prevents use of a parallel plan for the executed query.
We can improve matters by skipping use of a cursor and having the
executor push result tuples directly into the function's result
tuplestore. However, a moderate amount of new infrastructure is needed
to make that idea work:
* We can use the existing tstoreReceiver.c DestReceiver code to funnel
executor output to the tuplestore, but it has to be extended to support
plpgsql's requirement for possibly applying a tuple conversion map.
* SPI needs to be extended to allow use of a caller-supplied
DestReceiver instead of its usual receiver that puts tuples into
a SPITupleTable. Two new API calls are needed to handle both the
RETURN QUERY and RETURN QUERY EXECUTE cases.
I also felt that I didn't want these new API calls to use the legacy
method of specifying query parameter values with "char" null flags
(the old ' '/'n' convention); rather they should accept ParamListInfo
objects containing the parameter type and value info. This required
a bit of additional new infrastructure since we didn't yet have any
parse analysis callback that would interpret $N parameter symbols
according to type data supplied in a ParamListInfo. There seems to be
no harm in letting makeParamList install that callback by default,
rather than leaving a new ParamListInfo's parserSetup hook as NULL.
(Indeed, as of HEAD, I couldn't find anyplace that was using the
parserSetup field at all; plpgsql was using parserSetupArg for its
own purposes, but parserSetup seemed to be write-only.)
We can actually get plpgsql out of the business of using legacy null
flags altogether, and using ParamListInfo instead of its ad-hoc
PreparedParamsData structure; but this requires inventing one more
SPI API call that can replace SPI_cursor_open_with_args. That seems
worth doing, though.
SPI_execute_with_args and SPI_cursor_open_with_args are now unused
anywhere in the core PG distribution. Perhaps someday we could
deprecate/remove them. But cleaning up the crufty bits of the SPI
API is a task for a different patch.
Per bug #16040 from Jeremy Smith. This is unfortunately too invasive to
consider back-patching. Patch by me; thanks to Hamid Akhtar for review.
Discussion: https://postgr.es/m/16040-eaacad11fecfb198@postgresql.org
Eliminate enable_groupingsets_hash_disk, which was primarily useful
for testing grouping sets that use HashAgg and spill. Instead, hack
the table stats to convince the planner to choose hashed aggregation
for grouping sets that will spill to disk. Suggested by Melanie
Plageman.
Rename enable_hashagg_disk to hashagg_avoid_disk_plan, and invert the
meaning of on/off. The new name indicates more strongly that it only
affects the planner. Also, the word "avoid" is less definite, which
should avoid surprises when HashAgg still needs to use the
disk. Change suggested by Justin Pryzby, though I chose a different
GUC name.
Discussion: https://postgr.es/m/CAAKRu_aisiENMsPM2gC4oUY1hHG3yrCwY-fXUg22C6_MJUwQdA%40mail.gmail.com
Discussion: https://postgr.es/m/20200610021544.GA14879@telsasoft.com
Backpatch-through: 13
In PostgreSQL 10, we stopped using System V semaphores on Linux
systems. Update the example we give of an error message from a
misconfigured system to show what people are most likely to see these
days.
Back-patch to 10, where PREFERRED_SEMAPHORES=UNNAMED_POSIX arrived.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGLmJUSwybaPQv39rB8ABpqJq84im2UjZvyUY4feYhpWMw%40mail.gmail.com
Whitespace between tags is significant, and in some cases it creates
extra vertical space in man pages. The fix is either to remove some
newlines or in some cases to reword slightly to avoid the awkward
markup layout.
Remove obsolete instructions for old operating system versions, and
update the text to reflect the defaults on modern systems.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Magnus Hagander <magnus@hagander.net>
Discussion: https://postgr.es/m/CA%2BhUKGLmJUSwybaPQv39rB8ABpqJq84im2UjZvyUY4feYhpWMw%40mail.gmail.com
The preferred terminology has been support "function", not procedure,
for some time, so change that over. The command stays \dAp, since
\dAf is already something else.
The group of wal_init_zero and wal_recycle is WAL_SETTINGS in guc.c,
but previously their documents were located in
"Replication"/"Sending Servers" section. This commit moves them to
the proper section "Write Ahead Log"/"Settings".
Back-patch to v12 where wal_init_zero and wal_recycle parameters
were introduced.
Author: Fujii Masao
Discussion: https://postgr.es/m/b5190ab4-a169-6a42-0e49-aed0807c8976@oss.nttdata.com
The documentation of REINDEX includes a complete description of
CONCURRENTLY and its advantages as well as its disadvantages, but
reindexdb was not really clear about all that.
From discussion with Tom Lane, based on a report from Andrey Klychkov.
Discussion: https://postgr.es/m/1590486572.205117372@f500.i.mail.ru
Backpatch-through: 12
This commit updates the "Viewing Statistics" section more like
the existing catalogs chapter.
- Change its layout so that an introductory paragrap is put above
the table for each statistics view. Previously the explanations
were below the tables.
- Separate each view to different section and add index terms for them.
Author: Fujii Masao
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/6f8a482c-b3fa-4ed9-21c3-6d222a2cb87d@oss.nttdata.com
These were missed when these were added to pg_hba.conf in PG 12;
updates docs and pg_hba.conf.sample.
Reported-by: Arthur Nascimento
Bug: 16380
Discussion: https://postgr.es/m/20200421182736.GG19613@momjian.us
Backpatch-through: 12
Explain that the followings are tracked only when track_io_timing GUC
is enabled.
- blk_read_time and blk_write_time in pg_stat_database
- time spent reading and writing data file blocks in EXPLAIN output
with BUFFERS option
Whther track_io_timing is enabled affects also blk_read_time and
blk_write_time in pg_stat_statements, but which was already documented.
Author: Atsushi Torikoshi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CACZ0uYHo_NwbxpLH76OGF-O=13tkR0ZM0zeyGEhZ+JEXZVRyCA@mail.gmail.com
The B-Tree index deduplication strategy used during CREATE INDEX and
REINDEX differs from the lazy strategy used by retail inserts. Make
that clear by adding a new paragraph to the B-Tree implementation
section of the documentation.
In passing, do some copy-editing of nearby deduplication documentation.
The description missed a comma and lacked an explanation of what happens
with REPLICA IDENTITY USING INDEX when the dependent index is dropped.
Author: Marina Polyakova
Reviewed-by: Daniel Gustafsson, Michael Paquier
Discussion: https://postgr.es/m/ad1a0badc32658b1bbb07aa312346a1d@postgrespro.ru
Backpatch-through: 9.5
Synchronize the event names for parallel hash join waits with other
event names, by getting rid of the slashes and dropping "-ing"
suffixes. Rename ClogGroupUpdate to XactGroupUpdate, to match the
new SLRU name. Move the ProcSignalBarrier event to the IPC category;
it doesn't belong under IO.
Also a bit more wordsmithing in the wait event documentation tables.
Discussion: https://postgr.es/m/4505.1589640417@sss.pgh.pa.us
d140f2f3 has renamed receivedUpto to flushedUpto, and has added
writtenUpto to the WAL receiver's shared memory information, but
pg_stat_wal_receiver was not consistent with that. This commit renames
received_lsn to flushed_lsn, and adds a new column called written_lsn.
Bump catalog version.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20200515090817.GA212736@paquier.xyz
libpq's exports.txt was overlooked in commit 36d108761, which the
buildfarm is quite unhappy about.
Also, I'd gathered that the plan included renaming PQgetSSLKeyPassHook
to PQgetSSLKeyPassHook_OpenSSL, but that didn't happen in the patch
as committed. I'm taking it on my own authority to do so now, since
the window before beta1 is closing fast.
4dc6355210 provided a way for libraries and clients to modify how libpq
handles client certificate passphrases, by installing a hook. However,
these routines are quite specific to how OpenSSL works, so it's
misleading and not future-proof to have these names not refer to OpenSSL.
Change all the names to add "_OpenSSL" after "Hook", and fix the docs
accordingly.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/981DE552-E399-45C2-9F60-3F0E3770CC61@yesql.se
It's just weird that this name wasn't chosen to look like an
identifier. The suspicion that it wasn't thought about too
hard is reinforced by the fact that it wasn't documented in
the pg_locks view (until I did so, a day or two back).
Update, and add a comment reminding future adjusters of this
array to fix the docs too.
Do some desultory wordsmithing on various entries in the wait
events tables.
Discussion: https://postgr.es/m/24595.1589326879@sss.pgh.pa.us
This was mostly confusing, especially since some wait events in
this class had the suffix and some did not.
While at it, stop exposing MainLWLockNames[] as a globally visible
name; any code using that directly is almost certainly wrong, as
its name has been misleading for some time.
(GetLWLockIdentifier() is what to use instead.)
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Choose names that fit into the conventions for wait event names
(particularly, that multi-word names are in the style MultiWordName)
and hopefully convey more information to non-hacker users than the
previous names did.
Also rename SerializablePredicateLockListLock to
SerializablePredicateListLock; the old name was long enough to cause
table formatting problems, plus the double occurrence of "Lock" seems
confusing/error-prone.
Also change a couple of particularly opaque LWLock field names.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Originally, the names assigned to SLRUs had no purpose other than
being shmem lookup keys, so not a lot of thought went into them.
As of v13, though, we're exposing them in the pg_stat_slru view and
the pg_stat_reset_slru function, so it seems advisable to take a bit
more care. Rename them to names based on the associated on-disk
storage directories (which fortunately we *did* think about, to some
extent; since those are also visible to DBAs, consistency seems like
a good thing). Also rename the associated LWLocks, since those names
are likewise user-exposed now as wait event names.
For the most part I only touched symbols used in the respective modules'
SimpleLruInit() calls, not the names of other related objects. This
renaming could have been taken further, and maybe someday we will do so.
But for now it seems undesirable to change the names of any globally
visible functions or structs, so some inconsistency is unavoidable.
(But I *did* terminate "oldserxid" with prejudice, as I found that
name both unreadable and not descriptive of the SLRU's contents.)
Table 27.12 needs re-alphabetization now, but I'll leave that till
after the other LWLock renamings I have in mind.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Add some more terms, clarify some definitions, remove redundant terms,
move a couple of terms to keep alphabetical order.
Co-authored-by: Jürgen Purtz <juergen@purtz.de>
Co-authored-by: Erik Rijkers <er@xs4all.nl>
Co-authored-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/7b9b469e804777ac9df4d37716db935e@xs4all.nl
I abbreviated the heck out of the column headings, and made a few
small wording changes, to get it to build warning-free. I can't
say that the result is pretty, but it's probably better than
removing this table entirely.
As of this commit, we have zero "exceed the available area" warnings
in a US-letter PDF build, and one such warning (about an 863-millipoint
overrun) in an A4 build. I expect to get rid of that one by renaming
wait events, so I'm not doing anything about it at the formatting
level.
Discussion: https://postgr.es/m/6916.1589146280@sss.pgh.pa.us
In one or two places it seemed reasonable to modify the example so as
to shorten its output slightly; but for the most part I just added a
&zwsp; after 67 characters, which is the most we can fit on a line
of monospace text in A4 format.
Discussion: https://postgr.es/m/6916.1589146280@sss.pgh.pa.us
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
The previous design for this table didn't really work in narrow views,
such as PDF output; besides which its reliance on large morerows
values made it a pain to maintain (cf ab3e4fbd5, for example).
I experimented with a couple of ways to fix it, but the best and
simplest is to split it up into a separate table for each event
type category.
I also rearranged the event ordering to be strictly alphabetical,
as nobody would ever be able to find entries otherwise.
There is work afoot to revise the set of event names described
in this table, but this commit just changes the layout, not the
contents.
In passing, add a missing entry to pg_locks.locktype,
and cross-reference that to the related wait event list.
Discussion: https://postgr.es/m/6916.1589146280@sss.pgh.pa.us
This changes our catalog and view descriptions to use a style inspired
by the new format for function/operator tables: each table entry is
formatted roughly like a <varlistentry>, with the column name and type
on the first line and then an indented description. This provides much
more room for expansive descriptions than we had before, and thereby
eliminates a passel of PDF build warnings.
Discussion: https://postgr.es/m/12984.1588643549@sss.pgh.pa.us
I can't see any way to make this table fit in PDF column width
without either a fundamental redesign or abbreviating EXCLUSIVE.
So I did the latter.
It'd be nicer if the abbreviating didn't leak into the HTML output
as well; but the hackery required to make the output different
seems like more trouble than it's really worth.
Discussion: https://postgr.es/m/6916.1589146280@sss.pgh.pa.us
Even after the tweaking I did in commit 5545b69ae, some of the
longer keywords mentioned in the SQL standard don't fit the
available space in PDF output.
I experimented with various solutions like putting such keywords
on their own table lines, but everything looked ugly or confusing
or both; worse, the weirdness also appeared in the HTML version,
which (normally) doesn't need it.
The best answer seems to be to insert &zwsp; into long keywords
so that they can be broken into two lines when, and only when,
needed. It doesn't look too awful if the break happens after
an underscore --- and fortunately, all the problematic keywords
have underscores.
Discussion: https://postgr.es/m/6916.1589146280@sss.pgh.pa.us
Use xreflabel attributes instead of endterm attributes to control the
appearance of links to subsections of SQL command reference pages.
This is simpler, it matches what we do elsewhere (e.g. for GUC variables),
and it doesn't draw "Unresolved ID reference" warnings from the PDF
toolchain.
Fix some places where the text was absolutely dependent on an <xref>
rendering exactly so, by using a <link> around the required text
instead. At least one of those spots had already been turned into
bad grammar by subsequent changes, and the whole idea is just too
fragile for my taste. <xref> does NOT have fixed output, don't write
as if it does.
Consistently include a page-level link in cross-man-page references,
because otherwise they are useless/nonsensical in man-page output.
Likewise, be consistent about mentioning "below" or "above" in same-page
references; we were doing that in about 90% of the cases, but now it's
100%.
Also get rid of another nonfunctional-in-PDF idea, of making
cross-references to functions by sticking ID tags on <row> constructs.
We can put the IDs on <indexterm>s instead --- which is probably not any
more sensible in abstract terms, but it works where the other doesn't.
(There is talk of attaching cross-reference IDs to most or all of
the docs' function descriptions, but for now I just fixed the two
that exist.)
Discussion: https://postgr.es/m/14480.1589154358@sss.pgh.pa.us
This patch eliminates a few more "exceed the available area" warnings
whose causes aren't particularly connected to anything else.
The only one really worthy of comment is that I increased the space
allowed for an <orderedlist>'s numbers, because the default of 1em
doesn't quite work for more than one digit. The rest are one-off
insertions of &zwsp; and suchlike tweaks, in places where they
shouldn't do any damage to the material. (In particular, although
I split some long identifiers with zwsp's, there are other nearby
occurrences of each one; so those changes shouldn't hurt greppability
of the document sources.)
I made up a very crude hack to compare the docs with reality (as
embodied in the system catalogs) ... and indeed they don't match
everywhere. Missing oid columns, wrong data types, wrong "references"
links, columns listed in the wrong order. None of this seems quite
important enough to back-patch.
This converts the contrib documentation to the new style, and mops up
a couple of function tables that were outside chapter 9 in the main
docs.
A few contrib modules choose not to present their functions in the
standard tabular format. There might be room to rethink those decisions
now that the standard format is more friendly to verbose descriptions.
But I have not undertaken to do that here; I just converted existing
tables.
