pgsql-hackers. pg_opclass now has a row for each opclass supported by each
index AM, not a row for each opclass name. This allows pg_opclass to show
directly whether an AM supports an opclass, and furthermore makes it possible
to store additional information about an opclass that might be AM-dependent.
pg_opclass and pg_amop now store "lossy" and "haskeytype" information that we
previously expected the user to remember to provide in CREATE INDEX commands.
Lossiness is no longer an index-level property, but is associated with the
use of a particular operator in a particular index opclass.
Along the way, IndexSupportInitialize now uses the syscaches to retrieve
pg_amop and pg_amproc entries. I find this reduces backend launch time by
about ten percent, at the cost of a couple more special cases in catcache.c's
IndexScanOK.
Initial work by Oleg Bartunov and Teodor Sigaev, further hacking by Tom Lane.
initdb forced.
* remove support for encode() as it is in main tree now
* remove krb5.c
* new 'PX library' architecture
* remove BSD license from my code to let the general
PostgreSQL one to apply
* md5, sha1: ANSIfy, use const where appropriate
* various other formatting and clarity changes
* hmac()
* UN*X-like crypt() - system or internal crypt
* Internal crypt: DES, Extended DES, MD5, Blowfish
crypt-des.c, crypt-md5.c from FreeBSD
crypt-blowfish.c from Solar Designer
* gen_salt() for crypt() - Blowfish, MD5, DES, Extended DES
* encrypt(), decrypt(), encrypt_iv(), decrypt_iv()
* Cipher support in mhash.c, openssl.c
* internal: Blowfish, Rijndael-128 ciphers
* blf.[ch], rijndael.[ch] from OpenBSD
* there will be generated file rijndael-tbl.inc.
Marko Kreen
parser interface code. It now uses libxml2 instead of expat (though I've
left the old code in the tarball). This means *proper* XPath support, and
the provided function allows you to wrap your result set in XML tags to
produce a new XML document.
John Gray
has an alias SERIAL4 and a sister SERIAL8. SERIAL8 is just the same
except the created column is type int8 not int4.
initdb forced. Note this also breaks any chance of pg_upgrade from 7.1,
unless we hack up pg_upgrade to drop and recreate sequences. (Which is
not out of the question, but I don't wanna do it.)
default, but OIDS are removed from many system catalogs that don't need them.
Some interesting side effects: TOAST pointers are 20 bytes not 32 now;
pg_description has a three-column key instead of one.
Bugs fixed in passing: BINARY cursors work again; pg_class.relhaspkey
has some usefulness; pg_dump dumps comments on indexes, rules, and
triggers in a valid order.
initdb forced.
(as proposed in http://fts.postgresql.org/db/mw/msg.html?mid=1028327)
2. support for 'pass-by-value' arguments - to test this
we used special opclass for int4 with values in range [0-2^15]
More testing will be done after resolving problem with
index_formtuple and implementation of B-tree using GiST
3. small patch to contrib modules (seg,cube,rtree_gist,intarray) -
mark functions as 'isstrict' where needed.
Oleg Bartunov
be able to apply against what you just committed. It rolls soundex into
fuzzystrmatch.
Remove soundex/metaphone and merge into fuzzystrmatch.
Joe Conway
metaphone() in a contrib. There seem to be a fair number of different
approaches to both of these algorithms. I used the simplest case for
levenshtein which has a cost of 1 for any character insertion, deletion, or
substitution. For metaphone, I adapted the same code from CPAN that the PHP
folks did.
A couple of questions:
1. Does it make sense to fold the soundex contrib together with this one?
2. I was debating trying to add multibyte support to levenshtein (it would
make no sense at all for metaphone), but a quick search through the contrib
directory found no hits on the word MULTIBYTE. Should worry about adding
multibyte support to levenshtein()?
Joe Conway
* The ability to index more than one column in a table with a single
trigger.
* All uses of sprintf changed to snprintf to prevent users from crashing
Postgres.
* Error messages made more consistent
* Some changes made to bring it into line with coding requirements for
triggers specified in the docs. (ie. check you're a trigger before casting
your context)
* The perl script that generate indices has been updated to support indexing
multiple columns in a table.
* Fairly well tested in our development environment indexing a food
database's brand and description fields. The size of the fti index is
around 300,000 rows.
* All docs and examples upgraded. This includes specifying more efficient
index usage that was specified before, better examples that don't produce
duplicates, etc.
Christopher Kings-Lynne & Brett
! #define ARRISNULL(x) ( (x) ? ( ( ARR_NDIM(x) == NDIM ) ? ( ( ARRNELEMS( x ) )
? 0 : 1 ) : ( ( ARR_NDIM(x) ) ? (elog(ERROR,"Array is not one-dimentional: %d di
mentions", ARR_NDIM(x)),1) : 1 ) ) : 1 )
Should be "one-dimensional" and "dimensions". Bruce, would you fix that
when you apply it?
Tom
substrings of two characters or greater, and is case-sensitive.
This patch makes it work correctly. It generates only the suffixes of each
word, plus lowercases them - as specified by the README file.
This brings it into line with the fti.c function, makes it case-insensitive
properly, removes the problem with duplicate rows being returned from an fti
search and greatly reduces the size of the generated index table.
It was written by my co-worker, Brett Toolin.
Christopher Kings-Lynne
rather than deleting them only to have to create more. Steady state
is 2*CHECKPOINT_SEGMENTS + WAL_FILES + 1 segment files, which will
simply be renamed rather than constantly deleted and recreated.
To make this safe, added current XLOG file/offset number to page
header of XLOG pages, so that an un-overwritten page from an old
incarnation of a logfile can be reliably told from a valid page.
This change means that if you try to restart postmaster in a CVS-tip
database after installing the change, you'll get a complaint about
bad XLOG page magic number. If you don't want to initdb, run
contrib/pg_resetxlog (and be sure you shut down the old postmaster
cleanly).
redirections between the build files, which didn't work completely. Now
you just go to the directory of your choice and run make. Clean up the
build files to have a logical order, fix the unnecessary rebuilds, prevent
the deleting targets from removing files they're not responsible for. Ant
1.3 does not have a bug. It deletes directories just fine if you follow
the documentation.
Oracle database to PostgreSQL.
It currently dump the database schema (tables, views, sequences,
indexes, grants), with primary, unique and foreign keys into PostgreSQL
syntax without editing the SQL code generated. You can dump only a
particular schema from the Oracle database.
Functions, procedures and triggers with SQL or PLSQL code generated must
be reviewed to match the PostgreSQL syntax. Some usefull recommandation
on porting Oracle to PostgreSQL can be found at
http://techdocs.postgresql.org/
under the "Converting from other Databases to PostgreSQL" Oracle part. I
just
notice one thing more is that the trunc() function in Oracle is the same for
number
or date so be carefull when porting to PostgreSQL to use trunc() for number
and
date_trunc() for date.
I will add more precision in type NUMBER conversion based on length to match
as closest as possible all rich PostgreSQL numerics type. But it seems not to be
urgent as it seems that Oracle DBAs only create number with length 22 (default)
Space seems not to be their problem...
Gilles DAROLD
around. I tested this patch under Cygwin and Linux.
Note that I only changed dblink's Makefile in the most minimal way
to fix the link problem under Cygwin (i.e., use the link rule from
Makefile.shlib instead). dblink's Makefile should probably be further
patched to be consistent with the other PostgreSQL Makefiles.
Jason Tishler
Cygwin with the possible exception of mSQL-interface. Since I don't
have mSQL installed, I skipped this tool.
Except for dealing with a missing getopt.h (oid2name) and HUGE (seg),
the bulk of the patch uses the standard PostgreSQL approach to deal with
Windows DLL issues.
I tested the build aspect of this patch under Cygwin and Linux without
any ill affects. Note that I did not actually attempt to test the code
for functionality.
The procedure to apply the patch is as follows:
$ # save the attachment as /tmp/contrib.patch
$ # change directory to the top of the PostgreSQL source tree
$ patch -p0 </tmp/contrib.patch
Jason
checkpoint's redo pointer, not its undo pointer, per discussion in
pghackers a few days ago. No point in hanging onto undo information
until we have the ability to do something with it --- and this solves
a rather large problem with log space for long-running transactions.
Also, change all calls of write() to detect the case where write
returned a count less than requested, but failed to set errno.
Presume that this situation indicates ENOSPC, and give the appropriate
error message, rather than a random message associated with the previous
value of errno.
in c.h we should be using the visible structure. We should only see
de-TOASTed values in this program. The old method refused to compile
because the length macro was no longer an lvalue.
