This feature lets user code inspect and take action on DDL events.
Whenever a ddl_command_end event trigger is installed, DDL actions
executed are saved to a list which can be inspected during execution of
a function attached to ddl_command_end.
The set-returning function pg_event_trigger_ddl_commands can be used to
list actions so captured; it returns data about the type of command
executed, as well as the affected object. This is sufficient for many
uses of this feature. For the cases where it is not, we also provide a
"command" column of a new pseudo-type pg_ddl_command, which is a
pointer to a C structure that can be accessed by C code. The struct
contains all the info necessary to completely inspect and even
reconstruct the executed command.
There is no actual deparse code here; that's expected to come later.
What we have is enough infrastructure that the deparsing can be done in
an external extension. The intention is that we will add some deparsing
code in a later release, as an in-core extension.
A new test module is included. It's probably insufficient as is, but it
should be sufficient as a starting point for a more complete and
future-proof approach.
Authors: Álvaro Herrera, with some help from Andres Freund, Ian Barwick,
Abhijit Menon-Sen.
Reviews by Andres Freund, Robert Haas, Amit Kapila, Michael Paquier,
Craig Ringer, David Steele.
Additional input from Chris Browne, Dimitri Fontaine, Stephen Frost,
Petr Jelínek, Tom Lane, Jim Nasby, Steven Singer, Pavel Stěhule.
Based on original work by Dimitri Fontaine, though I didn't use his
code.
Discussion:
https://www.postgresql.org/message-id/m2txrsdzxa.fsf@2ndQuadrant.frhttps://www.postgresql.org/message-id/20131108153322.GU5809@eldon.alvh.no-ip.orghttps://www.postgresql.org/message-id/20150215044814.GL3391@alvh.no-ip.org
INSERT acquires RowExclusiveLock during normal operation and therefore
it makes sense to allow LOCK TABLE .. ROW EXCLUSIVE MODE to be executed
by users who have INSERT rights on a table (even if they don't have
UPDATE or DELETE).
Not back-patching this as it's a behavior change which, strictly
speaking, loosens security restrictions.
Per discussion with Tom and Robert (circa 2013).
Analysis by Noah Misch shows that the 25% threshold set by commit
53bb309d2d is lower than any other,
similar autovac threshold. While we don't know exactly what value
will be optimal for all users, it is better to err a little on the
high side than on the low side. A higher value increases the risk
that users might exhaust the available space and start seeing errors
before autovacuum can clean things up sufficiently, but a user who
hits that problem can compensate for it by reducing
autovacuum_multixact_freeze_max_age to a value dependent on their
average multixact size. On the flip side, if the emergency cap
imposed by that patch kicks in too early, the user will experience
excessive wraparound scanning and will be unable to mitigate that
problem by configuration. The new value will hopefully reduce the
risk of such bad experiences while still providing enough headroom
to avoid multixact member exhaustion for most users.
Along the way, adjust the documentation to reflect the effects of
commit 04e6d3b877, which taught
autovacuum to run for multixact wraparound even when autovacuum
is configured off.
Commit e7cb7ee145 included some design
decisions that seem pretty questionable to me, and there was quite a lot
of stuff not to like about the documentation and comments. Clean up
as follows:
* Consider foreign joins only between foreign tables on the same server,
rather than between any two foreign tables with the same underlying FDW
handler function. In most if not all cases, the FDW would simply have had
to apply the same-server restriction itself (far more expensively, both for
lack of caching and because it would be repeated for each combination of
input sub-joins), or else risk nasty bugs. Anyone who's really intent on
doing something outside this restriction can always use the
set_join_pathlist_hook.
* Rename fdw_ps_tlist/custom_ps_tlist to fdw_scan_tlist/custom_scan_tlist
to better reflect what they're for, and allow these custom scan tlists
to be used even for base relations.
* Change make_foreignscan() API to include passing the fdw_scan_tlist
value, since the FDW is required to set that. Backwards compatibility
doesn't seem like an adequate reason to expect FDWs to set it in some
ad-hoc extra step, and anyway existing FDWs can just pass NIL.
* Change the API of path-generating subroutines of add_paths_to_joinrel,
and in particular that of GetForeignJoinPaths and set_join_pathlist_hook,
so that various less-used parameters are passed in a struct rather than
as separate parameter-list entries. The objective here is to reduce the
probability that future additions to those parameter lists will result in
source-level API breaks for users of these hooks. It's possible that this
is even a small win for the core code, since most CPU architectures can't
pass more than half a dozen parameters efficiently anyway. I kept root,
joinrel, outerrel, innerrel, and jointype as separate parameters to reduce
code churn in joinpath.c --- in particular, putting jointype into the
struct would have been problematic because of the subroutines' habit of
changing their local copies of that variable.
* Avoid ad-hocery in ExecAssignScanProjectionInfo. It was probably all
right for it to know about IndexOnlyScan, but if the list is to grow
we should refactor the knowledge out to the callers.
* Restore nodeForeignscan.c's previous use of the relcache to avoid
extra GetFdwRoutine lookups for base-relation scans.
* Lots of cleanup of documentation and missed comments. Re-order some
code additions into more logical places.
The new type has the scope of whole the database cluster so it doesn't
behave the same as the existing OID alias types which have database
scope,
concerning object dependency. To avoid confusion constants of the new
type are prohibited from appearing where dependencies are made involving
it.
Also, add a note to the docs about possible MVCC violation and
optimization issues, which are general over the all reg* types.
Kyotaro Horiguchi
The default behavior for GSS and SSPI authentication methods has long
been to strip the realm off of the principal, however, this is not a
secure approach in multi-realm environments and the use-case for the
parameter at all has been superseded by the regex-based mapping support
available in pg_ident.conf.
Change the default for include_realm to be '1', meaning that we do
NOT remove the realm from the principal by default. Any installations
which depend on the existing behavior will need to update their
configurations (ideally by leaving include_realm set to 1 and adding a
mapping in pg_ident.conf, but alternatively by explicitly setting
include_realm=0 prior to upgrading). Note that the mapping capability
exists in all currently supported versions of PostgreSQL and so this
change can be done today. Barring that, existing users can update their
configurations today to explicitly set include_realm=0 to ensure that
the prior behavior is maintained when they upgrade.
This needs to be noted in the release notes.
Per discussion with Magnus and Peter.
The function and view added here provide a way to look at all settings
in postgresql.conf, any #include'd files, and postgresql.auto.conf
(which is what backs the ALTER SYSTEM command).
The information returned includes the configuration file name, line
number in that file, sequence number indicating when the parameter is
loaded (useful to see if it is later masked by another definition of the
same parameter), parameter name, and what it is set to at that point.
This information is updated on reload of the server.
This is unfiltered, privileged, information and therefore access is
restricted to superusers through the GRANT system.
Author: Sawada Masahiko, various improvements by me.
Reviewers: David Steele
The logic introduced in commit b69bf30b9b
and repaired in commits 669c7d20e6 and
7be47c56af helps to ensure that we don't
overwrite old multixact member information while it is still needed,
but a user who creates many large multixacts can still exhaust the
member space (and thus start getting errors) while autovacuum stands
idly by.
To fix this, progressively ramp down the effective value (but not the
actual contents) of autovacuum_multixact_freeze_max_age as member space
utilization increases. This makes autovacuum more aggressive and also
reduces the threshold for a manual VACUUM to perform a full-table scan.
This patch leaves unsolved the problem of ensuring that emergency
autovacuums are triggered even when autovacuum=off. We'll need to fix
that via a separate patch.
Thomas Munro and Robert Haas
The newly added ON CONFLICT clause allows to specify an alternative to
raising a unique or exclusion constraint violation error when inserting.
ON CONFLICT refers to constraints that can either be specified using a
inference clause (by specifying the columns of a unique constraint) or
by naming a unique or exclusion constraint. DO NOTHING avoids the
constraint violation, without touching the pre-existing row. DO UPDATE
SET ... [WHERE ...] updates the pre-existing tuple, and has access to
both the tuple proposed for insertion and the existing tuple; the
optional WHERE clause can be used to prevent an update from being
executed. The UPDATE SET and WHERE clauses have access to the tuple
proposed for insertion using the "magic" EXCLUDED alias, and to the
pre-existing tuple using the table name or its alias.
This feature is often referred to as upsert.
This is implemented using a new infrastructure called "speculative
insertion". It is an optimistic variant of regular insertion that first
does a pre-check for existing tuples and then attempts an insert. If a
violating tuple was inserted concurrently, the speculatively inserted
tuple is deleted and a new attempt is made. If the pre-check finds a
matching tuple the alternative DO NOTHING or DO UPDATE action is taken.
If the insertion succeeds without detecting a conflict, the tuple is
deemed inserted.
To handle the possible ambiguity between the excluded alias and a table
named excluded, and for convenience with long relation names, INSERT
INTO now can alias its target table.
Bumps catversion as stored rules change.
Author: Peter Geoghegan, with significant contributions from Heikki
Linnakangas and Andres Freund. Testing infrastructure by Jeff Janes.
Reviewed-By: Heikki Linnakangas, Andres Freund, Robert Haas, Simon Riggs,
Dean Rasheed, Stephen Frost and many others.
The minmax opclass was using the wrong support functions when
cross-datatypes queries were run. Instead of trying to fix the
pg_amproc definitions (which apparently is not possible), use the
already correct pg_amop entries instead. This requires jumping through
more hoops (read: extra syscache lookups) to obtain the underlying
functions to execute, but it is necessary for correctness.
Author: Emre Hasegeli, tweaked by Álvaro
Review: Andreas Karlsson
Also change BrinOpcInfo to record each stored type's typecache entry
instead of just the OID. Turns out that the full type cache is
necessary in brin_deform_tuple: the original code used the indexed
type's byval and typlen properties to extract the stored tuple, which is
correct in Minmax; but in other implementations that want to store
something different, that's wrong. The realization that this is a bug
comes from Emre also, but I did not use his patch.
I also adopted Emre's regression test code (with smallish changes),
which is more complete.
This commit adds the following functions:
box(point) -> box
bound_box(box, box) -> box
inet_same_family(inet, inet) -> bool
inet_merge(inet, inet) -> cidr
range_merge(anyrange, anyrange) -> anyrange
The first of these is also used to implement a new assignment cast from
point to box.
These functions are the first part of a base to implement an "inclusion"
operator class for BRIN, for multidimensional data types.
Author: Emre Hasegeli
Reviewed by: Andreas Karlsson
Foreign data wrappers can use this capability for so-called "join
pushdown"; that is, instead of executing two separate foreign scans
and then joining the results locally, they can generate a path which
performs the join on the remote server and then is scanned locally.
This commit does not extend postgres_fdw to take advantage of this
capability; it just provides the infrastructure.
Custom scan providers can use this in a similar way. Previously,
it was only possible for a custom scan provider to scan a single
relation. Now, it can scan an entire join tree, provided of course
that it knows how to produce the same results that the join would
have produced if executed normally.
KaiGai Kohei, reviewed by Shigeru Hanada, Ashutosh Bapat, and me.
In commit 31eae6028e, some documents were not updated to show the new
capability; fix that. Also, the error message you get when CURRENT_USER
and SESSION_USER are used in a context that doesn't accept them could be
clearer about it being a problem only in those contexts; so add the
word "here".
Author: Kyotaro HORIGUCHI
His patch submission also included changes to GRANT/REVOKE, but those
seemed more controversial, so I left them out. We can reconsider these
changes later.
This file isn't entirely consistent about whether "on" and "off"
should be marked up with <literal>, but it doesn't make much sense
to be inconsistent within a single sentence.
Etsuro Fujita
When implementing a replication solution ontop of logical decoding, two
related problems exist:
* How to safely keep track of replication progress
* How to change replication behavior, based on the origin of a row;
e.g. to avoid loops in bi-directional replication setups
The solution to these problems, as implemented here, consist out of
three parts:
1) 'replication origins', which identify nodes in a replication setup.
2) 'replication progress tracking', which remembers, for each
replication origin, how far replay has progressed in a efficient and
crash safe manner.
3) The ability to filter out changes performed on the behest of a
replication origin during logical decoding; this allows complex
replication topologies. E.g. by filtering all replayed changes out.
Most of this could also be implemented in "userspace", e.g. by inserting
additional rows contain origin information, but that ends up being much
less efficient and more complicated. We don't want to require various
replication solutions to reimplement logic for this independently. The
infrastructure is intended to be generic enough to be reusable.
This infrastructure also replaces the 'nodeid' infrastructure of commit
timestamps. It is intended to provide all the former capabilities,
except that there's only 2^16 different origins; but now they integrate
with logical decoding. Additionally more functionality is accessible via
SQL. Since the commit timestamp infrastructure has also been introduced
in 9.5 (commit 73c986add) changing the API is not a problem.
For now the number of origins for which the replication progress can be
tracked simultaneously is determined by the max_replication_slots
GUC. That GUC is not a perfect match to configure this, but there
doesn't seem to be sufficient reason to introduce a separate new one.
Bumps both catversion and wal page magic.
Author: Andres Freund, with contributions from Petr Jelinek and Craig Ringer
Reviewed-By: Heikki Linnakangas, Petr Jelinek, Robert Haas, Steve Singer
Discussion: 20150216002155.GI15326@awork2.anarazel.de,
20140923182422.GA15776@alap3.anarazel.de,
20131114172632.GE7522@alap2.anarazel.de
The original security barrier view implementation, on which RLS is
built, prevented all non-leakproof functions from being pushed down to
below the view, even when the function was not receiving any data from
the view. This optimization improves on that situation by, instead of
checking strictly for non-leakproof functions, it checks for Vars being
passed to non-leakproof functions and allows functions which do not
accept arguments or whose arguments are not from the current query level
(eg: constants can be particularly useful) to be pushed down.
As discussed, this does mean that a function which is pushed down might
gain some idea that there are rows meeting a certain criteria based on
the number of times the function is called, but this isn't a
particularly new issue and the documentation in rules.sgml already
addressed similar covert-channel risks. That documentation is updated
to reflect that non-leakproof functions may be pushed down now, if
they meet the above-described criteria.
Author: Dean Rasheed, with a bit of rework to make things clearer,
along with comment and documentation updates from me.
This provides a mechanism for specifying conversions between SQL data
types and procedural languages. As examples, there are transforms
for hstore and ltree for PL/Perl and PL/Python.
reviews by Pavel Stěhule and Andres Freund
The RLS capability is built on top of the WITH CHECK OPTION
system which was added for auto-updatable views, however, unlike
WCOs on views (which are mandated by the SQL spec to not fire until
after all other constraints and checks are done), it makes much more
sense for RLS checks to happen earlier than constraint and uniqueness
checks.
This patch reworks the structure which holds the WCOs a bit to be
explicitly either VIEW or RLS checks and the RLS-related checks are
done prior to the constraint and uniqueness checks. This also allows
better error reporting as we are now reporting when a violation is due
to a WITH CHECK OPTION and when it's due to an RLS policy violation,
which was independently noted by Craig Ringer as being confusing.
The documentation is also updated to include a paragraph about when RLS
WITH CHECK handling is performed, as there have been a number of
questions regarding that and the documentation was previously silent on
the matter.
Author: Dean Rasheed, with some kabitzing and comment changes by me.
It was previously mixed in with the description of ALTER TABLE
subcommands. Move it to the Parameters section, which is where it is on
other reference pages.
pointed out by Amit Langote
Right now it is visible whether a replication slot is active in any
session, but not in which. Adding the active_in column, containing the
pid of the backend having acquired the slot, makes it much easier to
associate pg_replication_slots entries with the corresponding
pg_stat_replication/pg_stat_activity row.
This should have been done from the start, but I (Andres) dropped the
ball there somehow.
Author: Craig Ringer, revised by me Discussion:
CAMsr+YFKgZca5_7_ouaMWxA5PneJC9LNViPzpDHusaPhU9pA7g@mail.gmail.com
Previously, these functions were created in a schema "binary_upgrade",
which was deleted after pg_upgrade was finished. Because we don't want
to keep that schema around permanently, move them to pg_catalog but
rename them with a binary_upgrade_... prefix.
The provided functions are only small wrappers around global variables
that were added specifically for pg_upgrade use, so keeping the module
separate does not create any modularity.
The functions still check that they are only called in binary upgrade
mode, so it is not possible to call these during normal operation.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
This view shows information about all connections, such as if the
connection is using SSL, which cipher is used, and which client
certificate (if any) is used.
Reviews by Alex Shulgin, Heikki Linnakangas, Andres Freund & Michael Paquier
FORCE option has been marked "obsolete" since very old version 7.4
but existed for backwards compatibility. Per discussion on pgsql-hackers,
we concluded that it's no longer worth keeping supporting the option.
It now also reports temporary objects dropped that are local to the
backend. Previously we weren't reporting any temp objects because it
was deemed unnecessary; but as it turns out, it is necessary if we want
to keep close track of DDL command execution inside one session. Temp
objects are reported as living in schema pg_temp, which works because
such a schema-qualification always refers to the temp objects of the
current session.
