The term "truncation" has been ambiguous since commit 10a8d13823 added
line pointer array truncation during heap pruning. Clear things up by
specifying that we're talking about rel truncation here, to match nearby
comments that apply to tuples with storage.
Don't allow VACUUM to WAL-log the value FrozenTransactionId as the
snapshotConflictHorizon of freezing or visibility map related WAL
records.
The only special XID value that's an allowable snapshotConflictHorizon
is InvalidTransactionId, which is interpreted as "record definitely
doesn't require a recovery conflict".
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznuNGSzF8v6OsgjaC5aYsb3cZ6HW6MLm30X0d65cmSH6A@mail.gmail.com
This is like the existing bt_page_stats() function, but it can
report on a range of pages rather than just one at a time.
I don't have a huge amount of faith in the portability of the
new test cases, but they do pass in a 32-bit FreeBSD VM here.
Further adjustment may be needed depending on buildfarm results.
Hamid Akhtar, reviewed by Naeem Akhter, Bertrand Drouvot,
Bharath Rupireddy, and myself
Discussion: https://postgr.es/m/CANugjht-=oGMRmNJKMqnBC69y7vr+wHDmm0ZK6-1pJsxoBKBbA@mail.gmail.com
A refcursor variable that is bound to a specific query (by declaring
it with "CURSOR FOR") now chooses a portal name in the same way as an
unbound, plain refcursor variable. Its string value starts out as
NULL, and unless that's overridden by manual assignment, it will be
replaced by a unique-within-session portal name during OPEN.
The previous behavior was to initialize such variables to contain
their own name, resulting in that also being the portal name unless
the user overwrote it before OPEN. The trouble with this is that
it causes failures due to conflicting portal names if the same
cursor variable name is used in different functions. It is pretty
non-orthogonal to have bound and unbound refcursor variables behave
differently on this point, too, so let's change it.
This change can cause compatibility problems for applications that
open a bound cursor in a plpgsql function and then use it in the
calling code without explicitly passing back the refcursor value
(portal name). If the calling code simply assumes that the portal
name matches the called function's variable name, it will now fail.
That can be fixed by explicitly assigning a string value to the
refcursor variable before OPEN, e.g.
DECLARE myc CURSOR FOR SELECT ...;
BEGIN
myc := 'myc'; -- add this
OPEN myc;
We have no documentation examples showing the troublesome usage
pattern, so we can hope it's rare in practice.
Patch by me; thanks to Pavel Stehule and Jan Wieck for review.
Discussion: https://postgr.es/m/1465101.1667345983@sss.pgh.pa.us
Cirrus is about to shut down its macOS-on-Intel support, so it's time to
move our CI testing over to ARM instances. The Homebrew package manager
changed its default installation prefix for the new architecture, so a
couple of tests need tweaks to find binaries.
Back-patch to 15, where in-tree CI began.
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20221122225744.GF11463%40telsasoft.com
When collecting ANALYZE sample on foreign tables, postgres_fdw fetched
all rows and performed the sampling locally. For large tables this means
transferring and immediately discarding large amounts of data.
This commit allows the sampling to be performed on the remote server,
transferring only the much smaller sample. The sampling is performed
using the built-in TABLESAMPLE methods (system, bernoulli) or random()
function, depending on the remote server version.
Remote sampling can be enabled by analyze_sampling on the foreign server
and/or foreign table, with supported values 'off', 'auto', 'system',
'bernoulli' and 'random'. The default value is 'auto' which uses either
'bernoulli' (TABLESAMPLE method) or 'random' (for remote servers without
TABLESAMPLE support).
When brin_minmax_multi_union merges summaries, we may end up with just a
single range after merge_overlapping_ranges. The summaries may contain
just one range each, and they may overlap (or be exactly the same).
With a single range there's no distance to calculate, but we happen to
call build_distances anyway - which is fine, we don't calculate the
distance in this case, except that with asserts this failed due to a
check there are at least two ranges.
The assert is unnecessarily strict, so relax it a bit and bail out if
there's just a single range. The relaxed assert would be enough, but
this way we don't allocate unnecessary memory for distance.
Backpatch to 14, where minmax-multi opclasses were introduced.
Reported-by: Jaime Casanova
Backpatch-through: 14
Discussion: https://postgr.es/m/YzVA55qS0hgz8P3r@ahch-to
f193883 has been incorrectly setting up the precision used in the
timestamp compilations returned by the following functions:
- LOCALTIME
- LOCALTIMESTAMP
- CURRENT_TIME
- CURRENT_TIMESTAMP
Specifying an out-of-range precision for CURRENT_TIMESTAMP and
LOCALTIMESTAMP was raising a WARNING without adjusting the precision,
leading to a subsequent error. LOCALTIME and CURRENT_TIME raised a
WARNING without an error, still the precision given to the internal
routines was not correct, so let's be clean.
Ian has reported the problems in timestamp.c, while I have noticed the
ones in date.c. Regression tests are added for all of them with
precisions high enough to provide coverage for the warnings, something
that went missing up to this commit.
Author: Ian Lawrence Barwick, Michael Paquier
Discussion: https://postgr.es/m/CAB8KJ=jQEnn9sYG+N752spt68wMrhmT-ocHCh4oeNmHF82QMWA@mail.gmail.com
New versions of perl trigger warnings within perl.h with our compiler
flags. At least -Wdeclaration-after-statement, -Wshadow=compatible-local are
known to be problematic.
To avoid these warnings, conditionally use #pragma GCC system_header before
including plperl.h.
Alternatively, we could add the include paths for problematic headers with
-isystem, but that is a larger hammer and is harder to search for.
A more granular alternative would be to use #pragma GCC diagnostic
push/ignored/pop, but gcc warns about unknown warnings being ignored, so every
to-be-ignored-temporarily compiler warning would require its own pg_config.h
symbol and #ifdef.
As the warnings are voluminous, it makes sense to backpatch this change. But
don't do so yet, we first want gather buildfarm coverage - it's e.g. possible
that some compiler claiming to be gcc compatible has issues with the pragma.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: Discussion: https://postgr.es/m/20221228182455.hfdwd22zztvkojy2@awork3.anarazel.de
Teach VACUUM to decide on whether or not to trigger freezing at the
level of whole heap pages. Individual XIDs and MXIDs fields from tuple
headers now trigger freezing of whole pages, rather than independently
triggering freezing of each individual tuple header field.
Managing the cost of freezing over time now significantly influences
when and how VACUUM freezes. The overall amount of WAL written is the
single most important freezing related cost, in general. Freezing each
page's tuples together in batch allows VACUUM to take full advantage of
the freeze plan WAL deduplication optimization added by commit 9e540599.
Also teach VACUUM to trigger page-level freezing whenever it detects
that heap pruning generated an FPI. We'll have already written a large
amount of WAL just to do that much, so it's very likely a good idea to
get freezing out of the way for the page early. This only happens in
cases where it will directly lead to marking the page all-frozen in the
visibility map.
In most cases "freezing a page" removes all XIDs < OldestXmin, and all
MXIDs < OldestMxact. It doesn't quite work that way in certain rare
cases involving MultiXacts, though. It is convenient to define "freeze
the page" in a way that gives FreezeMultiXactId the leeway to put off
the work of processing an individual tuple's xmax whenever it happens to
be a MultiXactId that would require an expensive second pass to process
aggressively (allocating a new multi is especially worth avoiding here).
FreezeMultiXactId is eager when processing is cheap (as it usually is),
and lazy in the event of an individual multi that happens to require
expensive second pass processing. This avoids regressions related to
processing of multis that page-level freezing might otherwise cause.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Jeff Davis <pgsql@j-davis.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-WzkFok_6EAHuK39GaW4FjEFQsY=3J0AAd6FXk93u-Xq3Fg@mail.gmail.com
Some compilers complain about sub_rteperminfos not being
initialized, evidently because they don't detect that it
is only used and set if isGeneralSelect is true.
Make it follow the long-established pattern for its
sibling variable sub_rtable.
Per reports from Pavel Stehule and the buildfarm.
Discussion: https://postgr.es/m/CAFj8pRDOvGOi-n616kM0Cc7qSbg_nGoS=-haB+D785sUXADqSg@mail.gmail.com
The modified error message for regcollationin failure includes
the database encoding, which it should've occurred to me is a
portability hazard for the regression tests. Adjust the test
so the expected output doesn't include that.
In passing, fix a comment typo introduced in b8c0ffbd2.
Per buildfarm.
Given the soft-input-error feature, we can reduce these functions
to be just thin wrappers around a soft-error call of the
corresponding datatype input function. This means less code and
more certainty that the to_reg* functions match the normal input
behavior.
Notably, it also means that they will accept numeric OID input,
which they didn't before. It's not clear to me if that omission
had more than laziness behind it, but it doesn't seem like
something we need to work hard to preserve.
Discussion: https://postgr.es/m/3910031.1672095600@sss.pgh.pa.us
This is not really complete, but it catches most cases of practical
interest. The main omissions are:
* regtype, regprocedure, and regoperator parse type names by
calling the main grammar, so any grammar-detected syntax error
will still be a hard error. Also, if one includes a type
modifier in such a type specification, errors detected by the
typmodin function will be hard errors.
* Lookup errors are handled just by passing missing_ok = true
to the relevant catalog lookup function. Because we've used
quite a restrictive definition of "missing_ok", this means that
edge cases such as "the named schema exists, but you lack
USAGE permission on it" are still hard errors.
It would make sense to me to replace most/all missing_ok
parameters with an escontext parameter and then allow these
additional lookup failure cases to be trapped too. But that's
a job for some other day.
Discussion: https://postgr.es/m/3342239.1671988406@sss.pgh.pa.us
This is slightly tedious because the adjustments cascade through
a couple of levels of subroutines, but it's not very hard.
I chose to avoid changing function signatures more than absolutely
necessary, by passing the escontext pointer in existing structs
where possible.
tsquery's nuisance NOTICEs about empty queries are suppressed in
soft-error mode, since they're not errors and we surely don't want
them to be shown to the user anyway. Maybe that whole behavior
should be reconsidered.
Discussion: https://postgr.es/m/3824377.1672076822@sss.pgh.pa.us
Historically these input functions just called strtoul or strtoull
and returned the result, with no error detection whatever. Upgrade
them to reject garbage input and out-of-range values, similarly to
our other numeric input routines.
To share the code for this with type oid, adjust the existing
"oidin_subr" to be agnostic about the SQL name of the type it is
handling, and move it to numutils.c; then clone it for 64-bit types.
Because the xid types previously accepted hex and octal input by
reason of calling strtoul[l] with third argument zero, I made the
common subroutine do that too, with the consequence that type oid
now also accepts hex and octal input. In view of 6fcda9aba, that
seems like a good thing.
While at it, simplify the existing over-complicated handling of
syntax errors from strtoul: we only need one ereturn not three.
Discussion: https://postgr.es/m/3526121.1672000729@sss.pgh.pa.us
When VACUUM determines that an existing MultiXact should use a freeze
plan that sets xmax to InvalidTransactionId, the original Multi may or
may not be before OldestMxact. Remove an incorrect assertion that
expected it to always be from before OldestMxact.
Oversight in commit 4ce3af.
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/TYAPR01MB5866B24104FD80B5D7E65C3EF5ED9@TYAPR01MB5866.jpnprd01.prod.outlook.com
002_pg_upgrade.pl gains support for a new environment variable called
"filter_rules", that can be used to point to a file that includes a
set of custom regular expressions that would be applied to the dumps of
the origin and target clusters when doing a cross-version test (aka when
defining olddump and oldinstall), to give the possibility to reshape
dynamically the dumps in the same way as the internals of the buildfarm
code so as the tests are able to pass in scenarios where one expects
them to even if pg_dump generates slightly-different outputs depending
on the versions involved.
This option is not used when pg_upgrade runs with the same version for
the origin and target clusters, and it is the last piece I see as
required to be able to plug-in more efficiently the TAP tests of
pg_upgrade with the buildfarm or just a CI.
Author: Anton A. Melnikov
Discussion: https://postgr.es/m/49f389ba-95ce-8a9b-09ae-f60650c0e7c7@inbox.ru
This option extracts (potentially decompressing) full-page images
included in WAL records into a given target directory. These images are
subject to the same filtering rules as the normal display of the WAL
records, hence with --relation one can for example extract only the FPIs
issued on the relation defined. By default, the records are printed or
their stats computed (--stats), using --quiet would only save the images
without any output generated.
This is a tool aimed mostly for very experienced users, useful for
fixing page-level corruption or just analyzing the past state of a page,
and there were no easy way to do that with the in-core tools up to now
when looking at WAL.
Each block is saved in a separate file, to ease their manipulation, with
the file respecting <lsn>.<ts>.<db>.<rel>.<blk>_<fork> with as format.
For instance, 00000000-010000C0.1663.1.6117.123_main refers to:
- WAL record LSN in hexa format (00000000-010000C0).
- Tablespace OID (1663).
- Database OID (1).
- Relfilenode (6117).
- Block number (123).
- Fork name of the file this block came from (_main).
Author: David Christensen
Reviewed-by: Sho Kato, Justin Pryzby, Bharath Rupireddy, Matthias van de
Meent
Discussion: https://postgr.es/m/CAOxo6XKjQb2bMSBRpePf3ZpzfNTwjQUc4Tafh21=jzjX6bX8CA@mail.gmail.com
This enables streaming or serializing changes immediately in logical
decoding. This parameter is intended to be used to test logical decoding
and replication of large transactions for which otherwise we need to
generate the changes till logical_decoding_work_mem is reached.
This helps in reducing the timing of existing tests related to logical
replication of in-progress transactions and will help in writing tests for
for the upcoming feature for parallelly applying large in-progress
transactions.
Author: Shi yu
Reviewed-by: Sawada Masahiko, Shveta Mallik, Amit Kapila, Dilip Kumar, Kuroda Hayato, Kyotaro Horiguchi
Discussion: https://postgr.es/m/OSZPR01MB63104E7449DBE41932DB19F1FD1B9@OSZPR01MB6310.jpnprd01.prod.outlook.com
f4f2f2b was doing a sequential scan of pg_class before checking if a
relation had attributes dependent on aclitem as data typewhen building
the set of ALTER TABLE queries, but it would be costly on a regression
database.
While on it, make the query style more consistent with the rest.
Reported-by: Justin Pryzby
Discussion: https://postgr.es/m/20221223032724.GQ1153@telsasoft.com
While at it, use a common subroutine already.
This doesn't move the needle very far in terms of making these
functions non-throwing; the only case we're now able to trap is
numeric-OID-is-out-of-range. Still, it seems like a pretty
non-controversial step in that direction.
ed1a88dda added support functions for the ntile(), percent_rank() and
cume_dist() window functions but neglected to actually add these support
functions to the pg_proc entry for the corresponding window function.
Also, take this opportunity to add these window functions to one of the
regression tests added in ed1a88dda to give the support functions a little
bit of exercise. If I'd done that in the first place then the omission
would have been more obvious.
Bump the catversion, again.
After some copy-edit I made in commit 3a06a79cd1, we have a <sect2>
that only contains a warning box. This doesn't look good. Rework by
moving the sect2 title to be the warning's title, and put the 'id' to it
as well, so that the external reference continues to work.
Backpatch to 15.
In branch master, I also take the opportunity to add titles to a couple
of other warning boxes elsewhere in the documentation.
Discussion: https://postgr.es/m/20221219164713.ccnlvtkyj6lmshqq@alvherre.pgsql
The test added in commit e44dae07f9 has a thinko: it wants to read
info about a few WAL records, but it obtains the LSN of the final record
to read by asking for the WAL insert position; however,
pg_get_wal_records_info only accepts to read up to the flush position
(cf. IsFutureLSN()). In normal conditions there is no difference, since
the last record written by the preceding loop is known flushed and it's
the one the test wants; but it's possible to have some other process
insert another WAL record that isn't flushed, and that causes the whole
test to explode.
Fix by having pg_get_wal_records_info() read only up to the flushed
position. Backpatch to 15, which is where pg_walinspect appeared.
Author: Karina Litskevich <litskevichkarina@gmail.com>
Discussion: https://postgr.es/m/a5559c95-52c3-5eea-cd63-9b4f1c70ff96@gmail.com
Commit 2f9661311b changed command tags from strings to numbers, but
forgot to adjust the code in the event trigger example, which
consequently failed to compile.
While fixing that, improve the indentation to adhere to pgindent style.
Backpatch to v13, where the change was introduced.
Author: Laurenz Albe
Discussion: https://postgr.es/m/81e36ac17dc80489e74dc5b6914afa6ccdb1a99d.camel@cybertec.at
Fix incorrect code which was trying to convert a Bitmapset of columns at
the attnums according to a parent table and transform them into the
equivalent Bitmapset with same attnums according to the given child table.
This code is new as of a61b1f748 and was failing to do the correct
translation when there was an intermediate parent table between 'rel' and
'top_parent_rel'.
Reported-by: Ranier Vilela
Author: Richard Guo, Amit Langote
Discussion: https://postgr.es/m/CAEudQArohfB_Gy%2BhcH2-bANUkxgjJiP%3DABq01_LgTNTbcNijag%40mail.gmail.com
An epoll fd belonging to the parent should be closed in the child. A
kqueue fd is automatically closed by fork(), but we should still adjust
our counter. For poll and Windows systems, nothing special is required.
On all systems we free the memory.
No caller yet, but we'll need this if we start using WaitEventSet in the
postmaster as planned.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2BZ-HpOj1JsO9eWUP%2Bar7npSVinsC_npxSy%2BjdOMsx%3DGg%40mail.gmail.com
At the time of commit 6a2a70a02 we didn't use latch infrastructure in
the postmaster. We're planning to start doing that, so we'd better make
sure that the signalfd inherited from a postmaster is not duplicated and
then leaked in the child.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BZ-HpOj1JsO9eWUP%2Bar7npSVinsC_npxSy%2BjdOMsx%3DGg%40mail.gmail.com
To be able to handle incoming connections on a server socket with
the WaitEventSet API, we'll need a new kind of event to indicate that
the the socket is ready to accept a connection.
On Unix, it's just the same as WL_SOCKET_READABLE, but on Windows there
is a different underlying kernel event that we need to map our
abstraction to.
No user yet, but a proposed patch would use this.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2BZ-HpOj1JsO9eWUP%2Bar7npSVinsC_npxSy%2BjdOMsx%3DGg%40mail.gmail.com
The regression test suite includes a table called "tab_core_types" that
has one attribute based on the type "aclitem". Keeping this attribute
as-is causes hard failures when running pg_upgrade with an origin on
~15. This commit updates upgrade_adapt.sql to automatically detect the
tables with such attributes and switch them to text so as pg_upgrade
is able to go through its run.
This does not provide the same detection coverage as pg_upgrade, where
we are able to find out aclitems used in arrays, domains or even
composite types, but this is (I guess) enough for most things like an
instance that had installcheck run on before the upgrade with a dump
generated from it.
Note that the buildfarm code has taken the simplest approach of just
dropping "tab_core_types", so what we have here is more modular.
Author: Anton A. Melnikov
Discussion: https://postgr.es/m/49f389ba-95ce-8a9b-09ae-f60650c0e7c7@inbox.ru
