Make a bit more noise about the timeout-interrupt bug. Also, remove the
release note entry for commit 423e1211a; that patch fixed a problem
introduced post-9.3.2, so there's no need to document it in the release
notes.
This documentation never got the word about the existence of check-world or
installcheck-world. Revise to recommend use of those, and document all the
subsidiary test suites. Do some minor wordsmithing elsewhere, too.
In passing, remove markup related to generation of plain-text regression
test instructions, since we don't do that anymore.
Back-patch to 9.1 where check-world was added. (installcheck-world exists
in 9.0; but since check-world doesn't, this patch would need additional
work to cover that branch, and it doesn't seem worth the effort.)
The documentation suggested using "echo | psql", but not the often-superior
alternative of a here-document. Also, be more direct about suggesting
that people avoid -c for multiple commands. Per discussion.
Previously we were piggybacking on transaction ID parameters to freeze
multixacts; but since there isn't necessarily any relationship between
rates of Xid and multixact consumption, this turns out not to be a good
idea.
Therefore, we now have multixact-specific freezing parameters:
vacuum_multixact_freeze_min_age: when to remove multis as we come across
them in vacuum (default to 5 million, i.e. early in comparison to Xid's
default of 50 million)
vacuum_multixact_freeze_table_age: when to force whole-table scans
instead of scanning only the pages marked as not all visible in
visibility map (default to 150 million, same as for Xids). Whichever of
both which reaches the 150 million mark earlier will cause a whole-table
scan.
autovacuum_multixact_freeze_max_age: when for cause emergency,
uninterruptible whole-table scans (default to 400 million, double as
that for Xids). This means there shouldn't be more frequent emergency
vacuuming than previously, unless multixacts are being used very
rapidly.
Backpatch to 9.3 where multixacts were made to persist enough to require
freezing. To avoid an ABI break in 9.3, VacuumStmt has a couple of
fields in an unnatural place, and StdRdOptions is split in two so that
the newly added fields can go at the end.
Patch by me, reviewed by Robert Haas, with additional input from Andres
Freund and Tom Lane.
We have a practice of providing a "bread crumb" trail between the minor
versions where the migration section actually tells you to do something.
Historically that was just plain text, eg, "see the release notes for
9.2.4"; but if you're using a browser or PDF reader, it's a lot nicer
if it's a live hyperlink. So use "<xref>" instead. Any argument against
doing this vanished with the recent decommissioning of plain-text release
notes.
Vik Fearing
Providing this information as plain text was doubtless worth the trouble
ten years ago, but it seems likely that hardly anyone reads it in this
format anymore. And the effort required to maintain these files (in the
form of extra-complex markup rules in the relevant parts of the SGML
documentation) is significant. So, let's stop doing that and rely solely
on the other documentation formats.
Per discussion, the plain-text INSTALL instructions might still be worth
their keep, so we continue to generate that file.
Rather than remove HISTORY and src/test/regress/README from distribution
tarballs entirely, replace them with simple stub files that tell the reader
where to find the relevant documentation. This is mainly to avoid possibly
breaking packaging recipes that expect these files to exist.
Back-patch to all supported branches, because simplifying the markup
requirements for release notes won't help much unless we do it in all
branches.
Replication slots are a crash-safe data structure which can be created
on either a master or a standby to prevent premature removal of
write-ahead log segments needed by a standby, as well as (with
hot_standby_feedback=on) pruning of tuples whose removal would cause
replication conflicts. Slots have some advantages over existing
techniques, as explained in the documentation.
In a few places, we refer to the type of replication slots introduced
by this patch as "physical" slots, because forthcoming patches for
logical decoding will also have slots, but with somewhat different
properties.
Andres Freund and Robert Haas
New checks include input, month/day/time internal adjustments, addition,
subtraction, multiplication, and negation. Also adjust docs to
correctly specify interval size in bytes.
Report from Rok Kralj
This doesn't work for prepared queries, but it's not too easy to get
the information in that case and there's some debate as to exactly
what the right thing to measure is, so just do this for now.
Andreas Karlsson, with slight doc changes by me.
This patch adds an option, huge_tlb_pages, which allows requesting the
shared memory segment to be allocated using huge pages, by using the
MAP_HUGETLB flag in mmap(). This can improve performance.
The default is 'try', which means that we will attempt using huge pages,
and fall back to non-huge pages if it doesn't work. Currently, only Linux
has MAP_HUGETLB. On other platforms, the default 'try' behaves the same as
'off'.
In the passing, don't try to round the mmap() size to a multiple of
pagesize. mmap() doesn't require that, and there's no particular reason for
PostgreSQL to do that either. When using MAP_HUGETLB, however, round the
request size up to nearest 2MB boundary. This is to work around a bug in
some Linux kernel versions, but also to avoid wasting memory, because the
kernel will round the size up anyway.
Many people were involved in writing this patch, including Christian Kruse,
Richard Poole, Abhijit Menon-Sen, reviewed by Peter Geoghegan, Andres Freund
and me.
json_build_array() and json_build_object allow for the construction of
arbitrarily complex json trees. json_object() turns a one or two
dimensional array, or two separate arrays, into a json_object of
name/value pairs, similarly to the hstore() function.
json_object_agg() aggregates its two arguments into a single json object
as name value pairs.
Catalog version bumped.
Andrew Dunstan, reviewed by Marko Tiikkaja.
This change allows us to eliminate the previous limit on stored query
length, and it makes the shared-memory hash table very much smaller,
allowing more statements to be tracked. (The default value of
pg_stat_statements.max is therefore increased from 1000 to 5000.)
In typical scenarios, the hash table can be large enough to hold all the
statements commonly issued by an application, so that there is little
"churn" in the set of tracked statements, and thus little need to do I/O
to the file.
To further reduce the need for I/O to the query-texts file, add a way
to retrieve all the columns of the pg_stat_statements view except for
the query text column. This is probably not of much interest for human
use but it could be exploited by programs, which will prefer using the
queryid anyway.
Ordinarily, we'd need to bump the extension version number for the latter
change. But since we already advanced pg_stat_statements' version number
from 1.1 to 1.2 in the 9.4 development cycle, it seems all right to just
redefine what 1.2 means.
Peter Geoghegan, reviewed by Pavel Stehule
This makes it possible to store lwlocks as part of some other data
structure in the main shared memory segment, or in a dynamic shared
memory segment. There is still a main LWLock array and this patch does
not move anything out of it, but it provides necessary infrastructure
for doing that in the future.
This change is likely to increase the size of LWLockPadded on some
platforms, especially 32-bit platforms where it was previously only
16 bytes.
Patch by me. Review by Andres Freund and KaiGai Kohei.
Fix integer overflow issue noted by Magnus Hagander, as well as a bunch
of other infelicities in commit ee1e5662d8
and its unreasonably large number of followups.
From the Department of Nitpicking, be consistent with other escaping
and use 'E' instead of 'e' to escape the string in the example docs
for GET DISAGNOSTICS stack = PG_CONTEXT.
Noticed by Department Chief Magnus Hagander.
Mention that CREATE TABLE LIKE INCLUDING DEFAULTS creates a link between
the original and new tables if a default function modifies the database,
like nextval().
This allows ending recovery as a consistent state has been reached. Without
this, there was no easy way to e.g restore an online backup, without
replaying any extra WAL after the backup ended.
MauMau and me.
Add the ability to specify the objects to move by who those objects are
owned by (as relowner) and change ALL to mean ALL objects. This
makes the command always operate against a well-defined set of objects
and not have the objects-to-be-moved based on the role of the user
running the command.
Per discussion with Simon and Tom.
There was a bug in the psql's meta command \conninfo. When the
IP address was specified in the hostaddr and psql used it to create
a connection (i.e., psql -d "hostaddr=xxx"), \conninfo could not
display that address. This is because \conninfo got the connection
information only from PQhost() which could not return hostaddr.
This patch adds PQhostaddr(), and changes \conninfo so that it
can display not only the host name that PQhost() returns but also
the IP address which PQhostaddr() returns.
The bug has existed since 9.1 where \conninfo was introduced.
But it's too late to add new libpq function into the released versions,
so no backpatch.
Unlike our other array functions, this considers the total number of
elements across all dimensions, and returns 0 rather than NULL when the
array has no elements. But it seems that both of those behaviors are
almost universally disliked, so hopefully that's OK.
Marko Tiikkaja, reviewed by Dean Rasheed and Pavel Stehule
krb5 has been deprecated since 8.3, and the recommended way to do
Kerberos authentication is using the GSSAPI authentication method
(which is still fully supported).
libpq retains the ability to identify krb5 authentication, but only
gives an error message about it being unsupported. Since all authentication
is initiated from the backend, there is no need to keep it at all
in the backend.
Tablespaces have a few options which can be set on them to give PG hints
as to how the tablespace behaves (perhaps it's faster for sequential
scans, or better able to handle random access, etc). These options were
only available through the ALTER TABLESPACE command.
This adds the ability to set these options at CREATE TABLESPACE time,
removing the need to do both a CREATE TABLESPACE and ALTER TABLESPACE to
get the correct options set on the tablespace.
Vik Fearing, reviewed by Michael Paquier.
This adds a 'MOVE' sub-command to ALTER TABLESPACE which allows moving sets of
objects from one tablespace to another. This can be extremely handy and avoids
a lot of error-prone scripting. ALTER TABLESPACE ... MOVE will only move
objects the user owns, will notify the user if no objects were found, and can
be used to move ALL objects or specific types of objects (TABLES, INDEXES, or
MATERIALIZED VIEWS).
This function provides a way of generating version 4 (pseudorandom) UUIDs
based on pgcrypto's PRNG. The main reason for doing this is that the
OSSP UUID library depended on by contrib/uuid-ossp is becoming more and
more of a porting headache, so we need an alternative for people who can't
install that. A nice side benefit though is that this implementation is
noticeably faster than uuid-ossp's uuid_generate_v4() function.
Oskari Saarenmaa, reviewed by Emre Hasegeli
The + modifier of \do didn't use to do anything, but now it adds an oprcode
column. This is useful both as an additional form of documentation of what
the operator does, and to save a step when finding out properties of the
underlying function.
Marko Tiikkaja, reviewed by Rushabh Lathia, adjusted a bit by me
Primarily, explain where to find the system-wide psqlrc file, per recent
gripe from John Sutton. Do some general wordsmithing and improve the
markup, too.
Also adjust psqlrc.sample so its comments about file location are somewhat
trustworthy. (Not sure why we bother with this file when it's empty,
but whatever.)
Back-patch to 9.2 where the startup file naming scheme was last changed.
We haven't wanted to do this in the past on the grounds that in rare
cases the original xmin value will be needed for forensic purposes, but
commit 37484ad2aa removes that objection,
so now we can.
Per extensive discussion, among many people, on pgsql-hackers.
Commit 37484ad2aa invalidated a good
chunk of documentation, so patch it up to reflect the new state of
play. Along the way, patch remaining documentation references to
FrozenXID to say instead FrozenTransactionId, so that they match the
way we actually spell it in the code.
This patch introduces generic support for ordered-set and hypothetical-set
aggregate functions, as well as implementations of the instances defined in
SQL:2008 (percentile_cont(), percentile_disc(), rank(), dense_rank(),
percent_rank(), cume_dist()). We also added mode() though it is not in the
spec, as well as versions of percentile_cont() and percentile_disc() that
can compute multiple percentile values in one pass over the data.
Unlike the original submission, this patch puts full control of the sorting
process in the hands of the aggregate's support functions. To allow the
support functions to find out how they're supposed to sort, a new API
function AggGetAggref() is added to nodeAgg.c. This allows retrieval of
the aggregate call's Aggref node, which may have other uses beyond the
immediate need. There is also support for ordered-set aggregates to
install cleanup callback functions, so that they can be sure that
infrastructure such as tuplesort objects gets cleaned up.
In passing, make some fixes in the recently-added support for variadic
aggregates, and make some editorial adjustments in the recent FILTER
additions for aggregates. Also, simplify use of IsBinaryCoercible() by
allowing it to succeed whenever the target type is ANY or ANYELEMENT.
It was inconsistent that it dealt with other polymorphic target types
but not these.
Atri Sharma and Andrew Gierth; reviewed by Pavel Stehule and Vik Fearing,
and rather heavily editorialized upon by Tom Lane
This fixes a problem noted as a followup to bug #8648: if a query has a
semantically-empty target list, e.g. SELECT * FROM zero_column_table,
ruleutils.c will dump it as a syntactically-empty target list, which was
not allowed. There doesn't seem to be any reliable way to fix this by
hacking ruleutils (note in particular that the originally zero-column table
might since have had columns added to it); and even if we had such a fix,
it would do nothing for existing dump files that might contain bad syntax.
The best bet seems to be to relax the syntactic restriction.
Also, add parse-analysis errors for SELECT DISTINCT with no columns (after
*-expansion) and RETURNING with no columns. These cases previously
produced unexpected behavior because the parsed Query looked like it had
no DISTINCT or RETURNING clause, respectively. If anyone ever offers
a plausible use-case for this, we could work a bit harder on making the
situation distinguishable.
Arguably this is a bug fix that should be back-patched, but I'm worried
that there may be client apps or PLs that expect "SELECT ;" to throw a
syntax error. The issue doesn't seem important enough to risk changing
behavior in minor releases.
WAL records of hint bit updates is useful to tools that want to examine
which pages have been modified. In particular, this is required to make
the pg_rewind tool safe (without checksums).
This can also be used to test how much extra WAL-logging would occur if
you enabled checksums, without actually enabling them (which you can't
currently do without re-initdb'ing).
Sawada Masahiko, docs by Samrat Revagade. Reviewed by Dilip Kumar, with
further changes by me.
This can be used to mark custom built binaries with an extra version
string such as a git describe identifier or distribution package release
version.
From: Oskari Saarenmaa <os@ohmu.fi>
Set min_recovery_apply_delay to force a delay in recovery apply for commit and
restore point WAL records. Other records are replayed immediately. Delay is
measured between WAL record time and local standby time.
Robert Haas, Fabrízio de Royes Mello and Simon Riggs
Detailed review by Mitsumasa Kondo
When wal_level=logical, we'll log columns from the old tuple as
configured by the REPLICA IDENTITY facility added in commit
07cacba983. This makes it possible
a properly-configured logical replication solution to correctly
follow table updates even if they change the chosen key columns,
or, with REPLICA IDENTITY FULL, even if the table has no key at
all. Note that updates which do not modify the replica identity
column won't log anything extra, making the choice of a good key
(i.e. one that will rarely be changed) important to performance
when wal_level=logical is configured.
Each insert, update, or delete to a catalog table will also log
the CMIN and/or CMAX values of stamped by the current transaction.
This is necessary because logical decoding will require access to
historical snapshots of the catalog in order to decode some data
types, and the CMIN/CMAX values that we may need in order to judge
row visibility may have been overwritten by the time we need them.
Andres Freund, reviewed in various versions by myself, Heikki
Linnakangas, KONDO Mitsumasa, and many others.
SQL-standard TABLE() is a subset of UNNEST(); they deal with arrays and
other collection types. This feature, however, deals with set-returning
functions. Use a different syntax for this feature to keep open the
possibility of implementing the standard TABLE().
This sets up ECDH key exchange, when compiling against OpenSSL that
supports EC. Then the ECDHE-RSA and ECDHE-ECDSA cipher suites can be
used for SSL connections. The latter one means that EC keys are now
usable.
The reason for EC key exchange is that it's faster than DHE and it
allows to go to higher security levels where RSA will be horribly slow.
There is also new GUC option ssl_ecdh_curve that specifies the curve
name used for ECDH. It defaults to "prime256v1", which is the most
common curve in use in HTTPS.
From: Marko Kreen <markokr@gmail.com>
Reviewed-by: Adrian Klaver <adrian.klaver@gmail.com>
