To build with -Dreadline=enabled one can use either readline or
libedit. The -Dlibedit_preferred flag is supposed to control the order
of names to lookup. This works fine when either both libraries are
present or -Dreadline is set to auto. However, explicitly enabling
readline with only libedit present, but not setting libedit_preferred,
or alternatively enabling readline with only readline present, but
setting libedit_preferred, too, are both broken. This is because
cc.find_library will throw an error for a not found dependency as soon
as the first required dependency is checked, thus it's impossible to
fallback to the alternative.
Here we only check the second of the two dependencies for
requiredness, thus we only fail when none of the two can be found.
Author: Wolfgang Walther
Reviewed-by: Nazir Bilal Yavuz, Alvaro Herrera, Peter Eisentraut
Reviewed-by: Tristan Partin
Discussion: https://www.postgresql.org/message-id/ca8f37e1-a2c3-40e2-91f6-59c3d3652ad4@technowledgy.de
Backpatch: 16-, where meson support was added
Passing an absolute bindir/libdir will install the binaries and
libraries to <build>/tmp_install/<bindir> and
<build>/tmp_install/<libdir> respectively.
This path is correctly passed to the regression test suite via
configure/make, but not via meson, yet. This is because the "/"
operator in the following expression throws away the whole left side
when the right side is an absolute path:
test_install_location / get_option('libdir')
This was already correctly handled for dir_prefix, which is likely
absolute as well. This patch handles both bindir and libdir in the
same way - prefixing absolute paths with the tmp_install path
correctly.
Author: Wolfgang Walther
Reviewed-by: Nazir Bilal Yavuz, Alvaro Herrera, Peter Eisentraut
Reviewed-by: Tristan Partin
Discussion: https://www.postgresql.org/message-id/ca8f37e1-a2c3-40e2-91f6-59c3d3652ad4@technowledgy.de
Backpatch: 16-, where meson support was added
Some distributions put clang into a different path than the llvm
binary path.
For example, this is the case on NixOS / nixpkgs, which failed to find
clang with meson before this patch.
Author: Wolfgang Walther
Reviewed-by: Nazir Bilal Yavuz, Alvaro Herrera, Peter Eisentraut
Reviewed-by: Tristan Partin
Discussion: https://www.postgresql.org/message-id/ca8f37e1-a2c3-40e2-91f6-59c3d3652ad4@technowledgy.de
Backpatch: 16-, where meson support was added
The upstream name for the ossp-uuid package / pkg-config file is
"uuid". Many distributions change this to be "ossp-uuid" to not
conflict with e2fsprogs.
This lookup fails on distributions which don't change this name, for
example NixOS / nixpkgs. Both "ossp-uuid" and "uuid" are also checked
in configure.ac.
Author: Wolfgang Walther
Reviewed-by: Nazir Bilal Yavuz, Alvaro Herrera, Peter Eisentraut
Reviewed-by: Tristan Partin
Discussion: https://www.postgresql.org/message-id/ca8f37e1-a2c3-40e2-91f6-59c3d3652ad4@technowledgy.de
Backpatch: 16-, where meson support was added
OpenSSL supports two types of session tickets for TLSv1.3, stateless
and stateful. The option we've used only turns off stateless tickets
leaving stateful tickets active. Use the new API introduced in 1.1.1
to disable all types of tickets.
Backpatch to all supported versions.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20240617173803.6alnafnxpiqvlh3g@awork3.anarazel.de
Backpatch-through: v12
Particularly on windows it's useful to look up dependencies via cmake, instead
of pkg-config. Meson supports doing so. Unfortunately the dependency names
used by various projects often differs between their pkg-config and cmake
files.
This would look a lot neater if we could rely on meson >= 0.60.0...
Reviewed-by: Tristan Partin <tristan@partin.io>
Discussion: https://postgr.es/m/20240709065101.xhc74r3mdg2lmn4w@awork3.anarazel.de
Backpatch: 16-, where meson support was added
This is necessary as ossp-uuid on windows installs neither a pkg-config nor a
cmake dependency information. Nor is there another supported uuid
implementation available on windows.
Reported-by: Dave Page <dpage@pgadmin.org>
Reviewed-by: Tristan Partin <tristan@partin.io>
Discussion: https://postgr.es/m/20240709065101.xhc74r3mdg2lmn4w@awork3.anarazel.de
Backpatch: 16-, where meson support was added
This is required as MIT Kerberos does provide neither pkg-config nor cmake
dependency information on windows.
Reported-by: Dave Page <dpage@pgadmin.org>
Reviewed-by: Tristan Partin <tristan@partin.io>
Discussion: https://postgr.es/m/20240709065101.xhc74r3mdg2lmn4w@awork3.anarazel.de
Backpatch: 16-, where meson support was added
These were missing since the initial introduction of the meson based build, in
e6927270cd. As-is this is unlikely to cause an issue, but a future commit
will add support for detecting gssapi without use of dependency(), which could
fail due to this.
Discussion: https://postgr.es/m/20240708225659.gmyqoosi7km6ysgn@awork3.anarazel.de
Backpatch: 16-, where the meson based build was added
Starting with the Sonoma toolchain macos' linker emits warnings when the same
library is linked to twice. That's ill considered, as the same library can be
used by multiple subsidiary libraries. Luckily there's a flag to suppress that
warning.
On Ventura meson's default of -Wl,-undefined,dynamic_lookup caused warnings,
which we suppressed with -Wl,-undefined,error. Unfortunately that causes a
warning on Sonoma, which is absurd, as it's documented linker default. To
avoid that warning, only add -Wl,-undefined,error if it does not trigger
warnings. Luckily dynamic_lookup doesn't trigger a warning on Sonoma anymore.
Discussion: https://postgr.es/m/20231201040515.p5bshhhtfru7d3da@awork3.anarazel.de
Backpatch: 16-, where the meson build was added
portname is set to host_system, but host_system might still be changed
later in the file. As a consequence, platforms where host_system is
changed later wouldn't find some of their platform-specific files
(driven by portname), and the build would fail. Move the assignment
of portname further down after the last change of host_system (but
before further overriding assignments to portname).
Discussion: https://www.postgresql.org/message-id/flat/CAC7zN94TdsHhY88XkroJzSMx7E%3DBQpV9LKKjNSEnTM04ihoWCA%40mail.gmail.com
The just released meson 1.3 strongly deprecated a hack we were using, emitting
a noisy warning (the hack basically depended on an implementation detail to
work). Turns out there has been a better way available for a while, I just
hadn't found it. 1.4 added a more convenient approach, but we can't rely on
that.
Reviewed-by: Tristan Partin <tristan@neon.tech>
Discussion: https://postgr.es/m/20231129185053.s6c7f73eg7b4ztfi@awork3.anarazel.de
Backpatch: 16-, where the meson build was added.
When we look for the Python installation using the meson python
module, we should make it use the python program previously determined
by the 'PYTHON' option. Otherwise, it will just use its own search
and the 'PYTHON' option won't affect it. We need this to be able to
select the Python installation to build PL/Python against.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/3f5427e8-cef6-474d-ae88-13db1bfdc1a7%40eisentraut.org
We should have done it this way all along, but we accidentally got
away with using the wrong BIO field up until OpenSSL 3.2. There,
the library's BIO routines that we rely on use the "data" field
for their own purposes, and our conflicting use causes assorted
weird behaviors up to and including core dumps when SSL connections
are attempted. Switch to using the approved field for the purpose,
i.e. app_data.
While at it, remove our configure probes for BIO_get_data as well
as the fallback implementation. BIO_{get,set}_app_data have been
there since long before any OpenSSL version that we still support,
even in the back branches.
Also, update src/test/ssl/t/001_ssltests.pl to allow for a minor
change in an error message spelling that evidently came in with 3.2.
Tristan Partin and Bo Andreson. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAN55FZ1eDDYsYaL7mv+oSLUij2h_u6hvD4Qmv-7PK7jkji0uyQ@mail.gmail.com
Previously we errored out if no python installation could be found (but we did
handle not having enough of python installed to build plpython
against). Presumably nobody hit this so far, as python is likely installed due
to meson requiring python.
Author: Tristan Partin <tristan@neon.tech>
Discussion: https://postgr.es/m/CSPIJVUDZFKX.3KHMOAVGF94RV@c3po
Backpatch: 16-, where meson support was added
-exported_symbols_list=... works on Ventura and earlier, but not on
Sonoma. The easiest way to fix it is to -Wl,-exported_symbols_list,@0@ which
actually seems more appropriate anyway, it's obviously a linker argument. It
is easier to use the -Wl,, syntax than passing multiple arguments, due to the
way the export_fmt is used (a single string that's formatted), but if it turns
out to be necessary, we can go for multiple arguments as well.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20230928222248.jw6s7yktpfsfczha@alap3.anarazel.de
Backpatch: 16-, where the meson based buildsystem was added
In the event the llvm option is defined to be 'auto', it is possible
that the host machine might not have a C++ compiler. If that is the
case, then we shouldn't continue reaching for the llvm dependency.
To make it easier to understand the case where LLVM support is disabled due to
lacking a C++ compiler, add a message noting that fact.
Author: Tristan Partin <tristan@neon.tech>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CSPIJVUDZFKX.3KHMOAVGF94RV@c3po
Backpatch: 16-, where meson support was added
That was already done in a lot of places, but not all.
Backpatch this to keep the the meson files aligned as long as reasonably
possible.
Author: Tristan Partin <tristan@neon.tech>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CSPIJVUDZFKX.3KHMOAVGF94RV@c3po
Backpatch: 16-, where meson support was added
run_command(check: true) already would have errorred out before the check is
reached.
Author: Tristan Partin <tristan@neon.tech>
Discussion: CSPIJVUDZFKX.3KHMOAVGF94RV@c3po
Meson validates 'choice' options for us, so technically this case is
impossible. A better error message helps people reading the code
understand what is going on in that branch.
Author: Tristan Partin <tristan@neon.tech>
Discussion: https://www.postgresql.org/message-id/flat/CSPIJVUDZFKX.3KHMOAVGF94RV%40c3po
Eventually it is likely worth trying to deal with this in a more expansive
way, by generating dependency files generated within the scripts. But it's not
entirely obvious how to do that in perl and is work more suitable for 17
anyway.
Reported-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Tristan Partin <tristan@neon.tech>
Discussion: https://postgr.es/m/87v8g7s6bf.fsf@wibble.ilmari.org
This fixes many spelling mistakes in comments, but a few references to
invalid parameter names, function names and option names too in comments
and also some in string constants
Also, fix an #undef that was undefining the incorrect definition
Author: Alexander Lakhin
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/d5f68d19-c0fc-91a9-118d-7c6a5a3f5fad@gmail.com
WHen building with GSSAPI support, explicitly require MIT Kerberos and
check for gssapi_ext.h in configure.ac and meson.build. Also add
documentation explicitly stating that we now require MIT Kerberos when
building with GSSAPI support.
Reveiwed by: Johnathan Katz
Discussion: https://postgr.es/m/abcc73d0-acf7-6896-e0dc-f5bc12a61bb1@postgresql.org
Detect and report if the tools necessary to build documentation are available
during configure. This is represented as two new options 'docs' and
'docs_pdf', both defaulting to 'auto'.
This should also fix a meson error about the installdocs target, when none of
the doc tools are found.
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20230325201414.sh7c6xlut2fpunnv@awork3.anarazel.de
Discussion: https://postgr.es/m/ZB8331v5IhUA/pNu@telsasoft.com
This converts pg_regress output format to emit TAP compliant output
while keeping it as human readable as possible for use without TAP
test harnesses. As verbose harness related information isn't really
supported by TAP this also reduces the verbosity of pg_regress runs
which makes scrolling through log output in buildfarm/CI runs a bit
easier as well.
As the meson TAP parser conumes whitespace, the leading indentation
for differentiating parallel tests from sequential tests has been
changed to a single character prefix.
This patch has been around for an extended period of time, reviewers
listed below may have been involved in reviewing a version quite
different from the version in this commit. The original idea for
this patch was a hacking session with Jinbao Chen.
TAP format testing is also enabled in meson as of this.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Nikolay Shaplov <dhyan@nataraj.su>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/BD4B107D-7E53-4794-ACBA-275BEB4327C9@yesql.se
Discussion: https://postgr.es/m/20220221164736.rq3ornzjdkmwk2wo@alap3.anarazel.de
In e522049f23 I accidentally forgot to add meson_bin to the argument list for
install-quiet. That kind of works on some platforms because the executable is
just 'python', wich the path to meson in an argument. But on windows meson
might be installed as an executable.
Reported-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/b36dd6a4-748a-4737-54d5-dc8a50fdbe4b@dunslane.net
The sslcertmode option controls whether the server is allowed and/or
required to request a certificate from the client. There are three
modes:
- "allow" is the default and follows the current behavior, where a
configured client certificate is sent if the server requests one
(via one of its default locations or sslcert). With the current
implementation, will happen whenever TLS is negotiated.
- "disable" causes the client to refuse to send a client certificate
even if sslcert is configured or if a client certificate is available in
one of its default locations.
- "require" causes the client to fail if a client certificate is never
sent and the server opens a connection anyway. This doesn't add any
additional security, since there is no guarantee that the server is
validating the certificate correctly, but it may helpful to troubleshoot
more complicated TLS setups.
sslcertmode=require requires SSL_CTX_set_cert_cb(), available since
OpenSSL 1.0.2. Note that LibreSSL does not include it.
Using a connection parameter different than require_auth has come up as
the simplest design because certificate authentication does not rely
directly on any of the AUTH_REQ_* codes, and one may want to require a
certificate to be sent in combination of a given authentication method,
like SCRAM-SHA-256.
TAP tests are added in src/test/ssl/, some of them relying on sslinfo to
check if a certificate has been set. These are compatible across all
the versions of OpenSSL supported on HEAD (currently down to 1.0.1).
Author: Jacob Champion
Reviewed-by: Aleksander Alekseev, Peter Eisentraut, David G. Johnston,
Michael Paquier
Discussion: https://postgr.es/m/9e5a8ccddb8355ea9fa4b75a1e3a9edc88a70cd3.camel@vmware.com
