about it doesn't simplify the grammar at all, and it does invite confusion
among those who only read the SELECT syntax summary and not the full details.
Per gripe from Jaime Casanova.
It turns out that Python 2.2 is the oldest version that PL/Python compiles
with, apparently related to the introduction of iterators. Might as well
document this.
Documentation files in HTML and man formats are now prepared for
distribution using the distprep make target, like everything else. They
are placed in doc/src/sgml/html and manX and installed from there by
make install, if present. The business with the tarballs in the tarball
is gone.
Test coverage support now covers the entire source tree, including
contrib, instead of just src/backend. In a related but independent
development, the commands make coverage and make coverage-html can be run
in any directory.
This turned out to be much easier than feared. Besides a few ad hoc fixes
to pass the make target down the tree, change all affected makefiles to
list their directories in the SUBDIRS variable, changed from variants like
DIRS and WANTED_DIRS. MSVC build fix was attempted as well.
This patch adds declaration so that they end up in section 3, and adds
them to the Makefiles to install them.
Also, some synopses needed reflowing so that they look nice in 80-column
terminals.
Adds the ability to retrieve async notifications using dblink,
via the addition of the function dblink_get_notify(). Original patch
by Marcus Kempe, suggestions by Tom Lane and Alvaro Herrera, patch
review and adjustments by Joe Conway.
This switches the man page building process to use the DocBook XSL stylesheet
toolchain. The previous targets for Docbook2X are removed. configure has been
updated to look for the new tools. The Documentation appendix contains the
new build instructions. There are also a few isolated tweaks in the
documentation to improve places that came out strangely in the man pages.
Both hex format and the traditional "escape" format are automatically
handled on input. The output format is selected by the new GUC variable
bytea_output.
As committed, bytea_output defaults to HEX, which is an *incompatible
change*. We will keep it this way for awhile for testing purposes, but
should consider whether to switch to the more backwards-compatible
default of ESCAPE before 8.5 is released.
Peter Eisentraut
already treating it as text anyway, to the point that I couldn't find anything
to change except the datatype markings in catalog/*.h. The only effect that
the bytea declaration had was to cause byteaout() to be invoked when pg_dump
(or another client program) inspected the column value. Since pg_dump wasn't
expecting that, but just treating what it got as text, the net result is that
dump and reload would mangle any backslashes or non-ASCII characters in the
filename string for a C-language function. That is a very long-standing bug,
but given the lack of field complaints it doesn't seem worth trying to find
a back-patchable fix. We'll just make this change to fix it going forward.
This change will also forestall problems after the planned change to let bytea
emit hex output instead of escaped characters.
Add family of functions that did not exist earlier,
mainly due to historical omission. Original patch by
Abhijit Menon-Sen, with review and modifications by
Joe Conway. catversion.h bumped.
reviewed by Greg Smith and Josh Williams.
Following is the proposal from ITAGAKI Takahiro:
Pgbench is a famous tool to measure postgres performance, but nowadays
it does not work well because it cannot use multiple CPUs. On the other
hand, postgres server can use CPUs very well, so the bottle-neck of
workload is *in pgbench*.
Multi-threading would be a solution. The attached patch adds -j
(number of jobs) option to pgbench. If the value N is greater than 1,
pgbench runs with N threads. Connections are equally-divided into
them (ex. -c64 -j4 => 4 threads with 16 connections each). It can
run on POSIX platforms with pthread and on Windows with win32 threads.
Here are results of multi-threaded pgbench runs on Fedora 11 with intel
core i7 (8 logical cores = 4 physical cores * HT). -j8 (8 threads) was
the best and the tps is 4.5 times of -j1, that is a traditional result.
$ pgbench -i -s10
$ pgbench -n -S -c64 -j1 => tps = 11600.158593
$ pgbench -n -S -c64 -j2 => tps = 17947.100954
$ pgbench -n -S -c64 -j4 => tps = 26571.124001
$ pgbench -n -S -c64 -j8 => tps = 52725.470403
$ pgbench -n -S -c64 -j16 => tps = 38976.675319
$ pgbench -n -S -c64 -j32 => tps = 28998.499601
$ pgbench -n -S -c64 -j64 => tps = 26701.877815
Is it acceptable to use pthread in contrib module?
If ok, I will add the patch to the next commitfest.
The current implementation fires an AFTER ROW trigger for each tuple that
looks like it might be non-unique according to the index contents at the
time of insertion. This works well as long as there aren't many conflicts,
but won't scale to massive unique-key reassignments. Improving that case
is a TODO item.
Dean Rasheed
conindid is the index supporting a constraint. We can use this not only for
unique/primary-key constraints, but also foreign-key constraints, which
depend on the unique index that constrains the referenced columns.
tgconstrindid is just copied from the constraint's conindid field, or is
zero for triggers not associated with constraints.
This is mainly intended as infrastructure for upcoming patches, but it has
some virtue in itself, since it exposes a relationship that you formerly
had to grovel in pg_depend to determine. I simplified one information_schema
view accordingly. (There is a pg_dump query that could also use conindid,
but I left it alone because it wasn't clear it'd get any faster.)
The original syntax made it difficult to add options without making them
into reserved words. This change parenthesizes the options to avoid that
problem, and makes provision for an explicit (and perhaps non-Boolean)
value for each option. The original syntax is still supported, but only
for the two original options ANALYZE and VERBOSE.
As a test case, add a COSTS option that can suppress the planner cost
estimates. This may be useful for including EXPLAIN output in the regression
tests, which are otherwise unable to cope with cross-platform variations in
cost estimates.
Robert Haas
not forced out-of-line unless that is necessary to make the row fit on a
page. Previously, they were forced out-of-line if needed to get the row
down to the default target size (1/4th page).
Kevin Grittner
The English FAQ has been moved to the wiki, so the translated versions should
have been removed at that point as well.
The FAQ_MINGW.html should have been removed when the platform FAQs were
integrated into the documentation (or earlier).
applied to both 8.4 and 8.5
random number seed each time. This is how it used to work years ago, but
we got rid of the seed reset because it was resetting the main random()
sequence and thus having undesirable effects on the rest of the system.
To fix, establish a private random number state for each execution of
geqo(), and initialize the state using the new GUC variable geqo_seed.
People who want to experiment with different random searches can do so
by changing geqo_seed, but you'll always get the same plan for the same
value of geqo_seed (if holding all other planner inputs constant, of course).
The new state is kept in PlannerInfo by adding a "void *" field reserved
for use by join_search hooks. Most of the rather bulky code changes in
this commit are just arranging to pass PlannerInfo around to all the GEQO
functions (many of which formerly didn't receive it).
Andres Freund, with some editorialization by Tom
Set up proper makefile dependencies in the documentation build rules,
especially around the HTML/index build. The problem we've had with all
previous solutions is that we have used the same file name, such as HTML.index
or bookindex.sgml, to mean different things at different stages of the build,
and make can't distinguish that. The solution here is that the first jade run
produces HTML.index, but does not require bookindex.sgml at all, and produces
no other html output (the latter an idea from Alvaro). The second jade run
includes bookindex.sgml, but does not recreate HTML.index. That way, when you
change an sgml file, jade is run twice and at the end all dependencies are
satisfied. Omitting the html output in the first stage also makes the full
build a lot faster.
When you run one of the print format targets, only the first jade run is run,
then the print target-specific commands. If an HTML build has completed
previously, the first jade run is skipped because the dependencies have
already been satisfied.
The draft and check targets for quick builds and syntax verification are still
there.
