Commit 8b08f7d482 failed to update these modules to at least give
non-broken error messages for partitioned indexes. Add appropriate
error support to them.
Peter G. was complaining about a problem of unfriendly error messages;
while we haven't fixed that yet, subsequent discussion let to discovery
of these unhandled cases.
Author: Michaël Paquier
Reported-by: Peter Geoghegan
Discussion: https://postgr.es/m/CAH2-WzkOKptQiE51Bh4_xeEHhaBwHkZkGtKizrFMgEkfUuRRQg@mail.gmail.com
Fix the lone error message in the whole source tree to use capitalized
HASH when referring to hash indexes, making it look like all the other
messages.
Someday it would be good to standardize 'B-Tree', 'B-tree', 'btree', and
random other spellings, too, but that's a larger patch ...
Author: Álvaro Herrera
The parenthesized style has only been used in a few modules. Change
that to use the style that is predominant across the whole tree.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Ryan Murphy <ryanfmurphy@gmail.com>
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Hash indexes can contain both pages which are all-zeroes (i.e.
PageIsNew()) and pages which have been initialized but currently
aren't used. The latter category can happen either when a page
has been reserved but not yet used or when it is used for a time
and then freed. pgstattuple was only prepared to deal with the
pages that are actually-zeroes, which it called zero_pages.
Rename the column to unused_pages (extension version 1.5 is
as-yet-unreleased) and make it count both kinds of unused pages.
Along the way, slightly tidy up the way we test for pages of
various types.
Robert Haas and Ashutosh Sharma, reviewed by Amit Kapila
Discussion: http://postgr.es/m/CAE9k0PkTtKFB3YndOyQMjwuHx+-FtUP1ynK8E-nHtetoow3NtQ@mail.gmail.com
This makes almost all core code follow the policy introduced in the
previous commit. Specific decisions:
- Text search support functions with char* and length arguments, such as
prsstart and lexize, may receive unaligned strings. I doubt
maintainers of non-core text search code will notice.
- Use plain VARDATA() on values detoasted or synthesized earlier in the
same function. Use VARDATA_ANY() on varlenas sourced outside the
function, even if they happen to always have four-byte headers. As an
exception, retain the universal practice of using VARDATA() on return
values of SendFunctionCall().
- Retain PG_GETARG_BYTEA_P() in pageinspect. (Page images are too large
for a one-byte header, so this misses no optimization.) Sites that do
not call get_page_from_raw() typically need the four-byte alignment.
- For now, do not change btree_gist. Its use of four-byte headers in
memory is partly entangled with storage of 4-byte headers inside
GBT_VARKEY, on disk.
- For now, do not change gtrgm_consistent() or gtrgm_distance(). They
incorporate the varlena header into a cache, and there are multiple
credible implementation strategies to consider.
The contrib extensions pageinspect, pg_visibility and pgstattuple only
work against regular relations which have storage. They don't work
against foreign tables, partitioned (parent) tables, views, et al.
Add checks to the user-callable functions to return a useful error
message to the user if they mistakenly pass an invalid relation to a
function which doesn't accept that kind of relation.
In passing, improve some of the existing checks to use ereport() instead
of elog(), add a function to consolidate common checks where
appropriate, and add some regression tests.
Author: Amit Langote, with various changes by me
Reviewed by: Michael Paquier and Corey Huinker
Discussion: https://postgr.es/m/ab91fd9d-4751-ee77-c87b-4dd704c1e59c@lab.ntt.co.jp
Since pgstattuple v1.5 hasn't been released yet, no need for a new
extension version. The new function exposes statistics about hash
indexes similar to what other pgstatindex functions return for other
index types.
Ashutosh Sharma, reviewed by Kuntal Ghosh. Substantial further
revisions by me.
Now that we track initial privileges on extension objects and changes to
those permissions, we can drop the superuser() checks from the various
functions which are part of the pgstattuple extension and rely on the
GRANT system to control access to those functions.
Since a pg_upgrade will preserve the version of the extension which
existed prior to the upgrade, we can't simply modify the existing
functions but instead need to create new functions which remove the
checks and update the SQL-level functions to use the new functions
(and to REVOKE EXECUTE rights on those functions from PUBLIC).
Thanks to Tom and Andres for adding support for extensions to follow
update paths (see: 40b449a), allowing this patch to be much smaller
since no new base version script needed to be included.
Approach suggested by Noah.
Reviewed by Michael Paquier.
CHECK_PAGE_OFFSET_RANGE() has been unused forever.
CHECK_RELATION_BLOCK_RANGE() has been unused in pgstatindex.c ever since
bt_page_stats() and bt_page_items() functions were moved from pgstattuple
to pageinspect module. It still exists in pageinspect/btreefuncs.c.
Daniel Gustafsson
The reverted changes were intended to force a choice of whether any
newly-added BufferGetPage() calls needed to be accompanied by a
test of the snapshot age, to support the "snapshot too old"
feature. Such an accompanying test is needed in about 7% of the
cases, where the page is being used as part of a scan rather than
positioning for other purposes (such as DML or vacuuming). The
additional effort required for back-patching, and the doubt whether
the intended benefit would really be there, have indicated it is
best just to rely on developers to do the right thing based on
comments and existing usage, as we do with many other conventions.
This change should have little or no effect on generated executable
code.
Motivated by the back-patching pain of Tom Lane and Robert Haas
This patch is a no-op patch which is intended to reduce the chances
of failures of omission once the functional part of the "snapshot
too old" patch goes in. It adds parameters for snapshot, relation,
and an enum to specify whether the snapshot age check needs to be
done for the page at this point. This initial patch passes NULL
for the first two new parameters and BGP_NO_SNAPSHOT_TEST for the
third. The follow-on patch will change the places where the test
needs to be made.
Dead or half-dead index leaf pages were incorrectly reported as live, as a
consequence of a code rearrangement I made (during a moment of severe brain
fade, evidently) in commit d287818eb5.
The index metapage was not counted in index_size, causing that result to
not agree with the actual index size on-disk.
Index root pages were not counted in internal_pages, which is inconsistent
compared to the case of a root that's also a leaf (one-page index), where
the root would be counted in leaf_pages. Aside from that inconsistency,
this could lead to additional transient discrepancies between the reported
page counts and index_size, since it's possible for pgstatindex's scan to
see zero or multiple pages marked as BTP_ROOT, if the root moves due to
a split during the scan. With these fixes, index_size will always be
exactly one page more than the sum of the displayed page counts.
Also, the index_size result was incorrectly documented as being measured in
pages; it's always been measured in bytes. (While fixing that, I couldn't
resist doing some small additional wordsmithing on the pgstattuple docs.)
Including the metapage causes the reported index_size to not be zero for
an empty index. To preserve the desired property that the pgstattuple
regression test results are platform-independent (ie, BLCKSZ configuration
independent), scale the index_size result in the regression tests.
The documentation issue was reported by Otsuka Kenji, and the inconsistent
root page counting by Peter Geoghegan; the other problems noted by me.
Back-patch to all supported branches, because this has been broken for
a long time.
This patch reduces pg_am to just two columns, a name and a handler
function. All the data formerly obtained from pg_am is now provided
in a C struct returned by the handler function. This is similar to
the designs we've adopted for FDWs and tablesample methods. There
are multiple advantages. For one, the index AM's support functions
are now simple C functions, making them faster to call and much less
error-prone, since the C compiler can now check function signatures.
For another, this will make it far more practical to define index access
methods in installable extensions.
A disadvantage is that SQL-level code can no longer see attributes
of index AMs; in particular, some of the crosschecks in the opr_sanity
regression test are no longer possible from SQL. We've addressed that
by adding a facility for the index AM to perform such checks instead.
(Much more could be done in that line, but for now we're content if the
amvalidate functions more or less replace what opr_sanity used to do.)
We might also want to expose some sort of reporting functionality, but
this patch doesn't do that.
Alexander Korotkov, reviewed by Petr Jelínek, and rather heavily
editorialized on by me.
Because of gcc -Wmissing-prototypes, all functions in dynamically
loadable modules must have a separate prototype declaration. This is
meant to detect global functions that are not declared in header files,
but in cases where the function is called via dfmgr, this is redundant.
Besides filling up space with boilerplate, this is a frequent source of
compiler warnings in extension modules.
We can fix that by creating the function prototype as part of the
PG_FUNCTION_INFO_V1 macro, which such modules have to use anyway. That
makes the code of modules cleaner, because there is one less place where
the entry points have to be listed, and creates an additional check that
functions have the right prototype.
Remove now redundant prototypes from contrib and other modules.
This allows us to specify the target relation with several expressions,
'relname', 'schemaname.relname' and OID in all pgstattuple functions.
pgstatindex() and pg_relpages() could not accept OID as the argument
so far.
Per discussion on -hackers, we decided to keep two types of interfaces,
with regclass-type and TEXT-type argument, for each pgstattuple
function because of the backward-compatibility issue. The functions
which have TEXT-type argument will be deprecated in the future release.
Patch by Satoshi Nagayasu, reviewed by Rushabh Lathia and Fujii Masao.
A similar problem for pgstattuple() was fixed in April of 2010 by commit
33065ef8bc, but pgstatindex() seems to have
been overlooked.
Back-patch all the way, as with that commit, though not to 7.4 through
8.1, since those are now EOL.
For an empty index, the pgstatindex() function would compute 0.0/0.0 for
its avg_leaf_density and leaf_fragmentation outputs. On machines that
follow the IEEE float arithmetic standard with any care, that results in
a NaN. However, per report from Rushabh Lathia, Microsoft couldn't
manage to get this right, so you'd get a bizarre error on Windows.
Fix by forcing the results to be NaN explicitly, rather than relying on
the division operator to give that or the snprintf function to print it
correctly. I have some doubts that this is really the most useful
definition, but it seems better to remain backward-compatible with
those platforms for which the behavior wasn't completely broken.
Back-patch to 8.2, since the code is like that in all current releases.
temporary tables of other sessions; that is unsafe because of the way our
buffer management works. Per report from Stuart Bishop.
This is redundant with the bufmgr.c checks in HEAD, but not at all redundant
in the back branches.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
