Modern x86 and x86-64 processors with SSE 4.2 support have special
instructions, crc32b and crc32q, for calculating CRC-32C. They greatly
speed up CRC calculation.
Whether the instructions can be used or not depends on the compiler and the
target architecture. If generation of SSE 4.2 instructions is allowed for
the target (-msse4.2 flag on gcc and clang), use them. If they are not
allowed by default, but the compiler supports the -msse4.2 flag to enable
them, compile just the CRC-32C function with -msse4.2 flag, and check at
runtime whether the processor we're running on supports it. If it doesn't,
fall back to the slicing-by-8 algorithm. (With the common defaults on
current operating systems, the runtime-check variant is what you get in
practice.)
Abhijit Menon-Sen, heavily modified by me, reviewed by Andres Freund.
Now that we use CRC-32C in WAL and the control file, the "traditional" and
"legacy" CRC-32 variants are not used in any frontend programs anymore.
Move the code for those back from src/common to src/backend/utils/hash.
Also move the slicing-by-8 implementation (back) to src/port. This is in
preparation for next patch that will add another implementation that uses
Intel SSE 4.2 instructions to calculate CRC-32C, where available.
Should call just "pg_rewind", instead of "./pg_rewind". The tests are called
so that PATH contains the temporariy installation bin dir.
Per report from Alvaro Herrera
* Don't pass arguments to prove, since that's not supported on perl 5.8
which is the minimum version supported by the TAP tests. Refactor the
test files themselves to run the tests twice, in both local and remote mode.
* Use eq rather than == for string comparison. This thinko caused the remote
versions of the tests to never run.
* Add "use strict" and "use warnings", and fix warnings that that produced.
* Increase the delay after standby promotion, to make the tests more robust.
* In remote mode, the connection string to the promoted standby was
incorrect, leading to connection errors.
Patch by Michael Paquier, to address Peter Eisentraut's report.
After a timeline switch, we would leave behind recycled WAL segments that
are in the future, but on the old timeline. After promotion, and after they
become old enough to be recycled again, we would notice that they don't have
a .ready or .done file, create a .ready file for them, and archive them.
That's bogus, because the files contain garbage, recycled from an older
timeline (or prealloced as zeros). We shouldn't archive such files.
This could happen when we're following a timeline switch during replay, or
when we switch to new timeline at end-of-recovery.
To fix, whenever we switch to a new timeline, scan the data directory for
WAL segments on the old timeline, but with a higher segment number, and
remove them. Those don't belong to our timeline history, and are most
likely bogus recycled or preallocated files. They could also be valid files
that we streamed from the primary ahead of time, but in any case, they're
not needed to recover to the new timeline.
gettext was unhappy about the commit b216ad7 because it revealed
the problem that internationalized messages may contain '\r' escape
sequence in pg_rewind. This commit moves '\r' to a separate printf() call.
Michael Paquier, bug reported by Peter Eisentraut
This view shows information about all connections, such as if the
connection is using SSL, which cipher is used, and which client
certificate (if any) is used.
Reviews by Alex Shulgin, Heikki Linnakangas, Andres Freund & Michael Paquier
Locking and updating the same tuple repeatedly led to some strange
multixacts being created which had several subtransactions of the same
parent transaction holding locks of the same strength. However,
once a subxact of the current transaction holds a lock of a given
strength, it's not necessary to acquire the same lock again. This made
some coding patterns much slower than required.
The fix is twofold. First we change HeapTupleSatisfiesUpdate to return
HeapTupleBeingUpdated for the case where the current transaction is
already a single-xid locker for the given tuple; it used to return
HeapTupleMayBeUpdated for that case. The new logic is simpler, and the
change to pgrowlocks is a testament to that: previously we needed to
check for the single-xid locker separately in a very ugly way. That
test is simpler now.
As fallout from the HTSU change, some of its callers need to be amended
so that tuple-locked-by-own-transaction is taken into account in the
BeingUpdated case rather than the MayBeUpdated case. For many of them
there is no difference; but heap_delete() and heap_update now check
explicitely and do not grab tuple lock in that case.
The HTSU change also means that routine MultiXactHasRunningRemoteMembers
introduced in commit 11ac4c73cb is no longer necessary and can be
removed; the case that used to require it is now handled naturally as
result of the changes to heap_delete and heap_update.
The second part of the fix to the performance issue is to adjust
heap_lock_tuple to avoid the slowness:
1. Previously we checked for the case that our own transaction already
held a strong enough lock and returned MayBeUpdated, but only in the
multixact case. Now we do it for the plain Xid case as well, which
saves having to LockTuple.
2. If the current transaction is the only locker of the tuple (but with
a lock not as strong as what we need; otherwise it would have been
caught in the check mentioned above), we can skip sleeping on the
multixact, and instead go straight to create an updated multixact with
the additional lock strength.
3. Most importantly, make sure that both the single-xid-locker case and
the multixact-locker case optimization are applied always. We do this
by checking both in a single place, rather than them appearing in two
separate portions of the routine -- something that is made possible by
the HeapTupleSatisfiesUpdate API change. Previously we would only check
for the single-xid case when HTSU returned MayBeUpdated, and only
checked for the multixact case when HTSU returned BeingUpdated. This
was at odds with what HTSU actually returned in one case: if our own
transaction was locker in a multixact, it returned MayBeUpdated, so the
optimization never applied. This is what led to the large multixacts in
the first place.
Per bug report #8470 by Oskari Saarenmaa.
If someone else already set the callbacks, don't overwrite them with
ours. When unsetting the callbacks, only unset them if they point to
ours.
Author: Jan Urbański <wulczer@wulczer.org>
FORCE option has been marked "obsolete" since very old version 7.4
but existed for backwards compatibility. Per discussion on pgsql-hackers,
we concluded that it's no longer worth keeping supporting the option.
When certain event-trigger-only functions are called when not in the
wrong context, they were reporting the "feature not supported" SQLSTATE,
which is somewhat misleading. Create a new custom error code for such
uses instead.
Not backpatched since it may be seen as an undesirable behavioral
change.
Author: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAB7nPqQ-5NAkHQHh_NOm7FPep37NCiLKwPoJ2Yxb8TDoGgbYYA@mail.gmail.com
It was previously possible to have the launcher re-execute its main loop
before shutting down if some other signal was received or an error
occurred after getting SIGTERM, as reported by Qingqing Zhou.
While investigating, Tom Lane further noticed that if autovacuum had
been disabled in the config file, it would misbehave by trying to start
a new worker instead of bailing out immediately -- it would consider
itself as invoked in emergency mode.
Fix both problems by checking the shutdown flag in a few more places.
These problems have existed since autovacuum was introduced, so
backpatch all the way back.
This is consistent with what the new numeric suppor for abbreviated keys
now does, and seems much more convenient than having a separate compiler
define to control this debug output.
Peter Geoghegan
While gcc doesn't complain if you declare a function "static" and then
define it not-static, other compilers do; and in any case the code is
highly misleading this way. Add the missing "static" keywords to a
couple of recent patches. Per buildfarm member pademelon.
Commit a2e35b53 should have removed the variable declaration in the
inner block, but didn't. As a result, the returned address might end up
not being what was intended.
Don't allow pg_rewind to run as root on Unix platforms, as any new or
replaced files in the data directory would become owned by root. On Windows,
it can run under a user that has Administrator rights, but a restricted
token needs to be used. This is the same we do e.g. in pg_resetxlog.
Also, add missing set_pglocale_pgservice() call, to fix localization.
Michael Paquier and Fujii Masao
It now also reports temporary objects dropped that are local to the
backend. Previously we weren't reporting any temp objects because it
was deemed unnecessary; but as it turns out, it is necessary if we want
to keep close track of DDL command execution inside one session. Temp
objects are reported as living in schema pg_temp, which works because
such a schema-qualification always refers to the temp objects of the
current session.
This was already fixed in 0d906798f, but I failed to update the
array-formatted case. This is not backpatched, since this only affects
the code path introduced by commit a676201490.
Considering the number of cases in which "unused" command line arguments
are silently ignored by compilers, it's fairly astonishing that anybody
thought this warning was useful; it's certainly nothing but an annoyance
when building Postgres. One such case is that neither gcc nor clang
complain about unrecognized -Wno-foo switches, making it more difficult
to figure out whether the switch does anything than one could wish.
Back-patch to 9.3, which is as far back as the patch applies conveniently
(we'd have to back-patch PGAC_PROG_CC_VAR_OPT to go further, and it doesn't
seem worth that).
This is a long-standing inconsistency that was probably just missed when
we got 64 bit MSVC builds. This brings the platform into line with all
other systems.
Reduce lock levels to ShareRowExclusive for the following SQL
CREATE TRIGGER (but not DROP or ALTER)
ALTER TABLE ENABLE TRIGGER
ALTER TABLE DISABLE TRIGGER
ALTER TABLE … ADD CONSTRAINT FOREIGN KEY
Original work by Simon Riggs, extracted and refreshed by Andreas Karlsson
New test cases added by Andreas Karlsson
Reviewed by Noah Misch, Andres Freund, Michael Paquier and Simon Riggs
Previously we would re-use input subexpressions in all expression trees
attached to a Join plan node. However, if it's an outer join and the
subexpression appears in the nullable-side input, this is potentially
incorrect for apparently-matching subexpressions that came from above
the outer join (ie, targetlist and qpqual expressions), because the
executor will treat the subexpression value as NULL when maybe it should
not be.
The case is fairly hard to hit because (a) you need a non-strict
subexpression (else NULL is correct), and (b) we don't usually compute
expressions in the outputs of non-toplevel plan nodes. But we might do
so if the expressions are sort keys for a mergejoin, for example.
Probably in the long run we should make a more explicit distinction between
Vars appearing above and below an outer join, but that will be a major
planner redesign and not at all back-patchable. For the moment, just hack
set_join_references so that it will not match any non-Var expressions
coming from nullable inputs to expressions that came from above the join.
(This is somewhat overkill, in that a strict expression could still be
matched, but it doesn't seem worth the effort to check that.)
Per report from Qingqing Zhou. The added regression test case is based
on his example.
This has been broken for a very long time, so back-patch to all active
branches.
Some of the TAP tests were supposing that PG programs would accept switches
after non-switch arguments on their command lines. While GNU getopt_long()
does allow that, our own implementation does not, and it's nowhere
suggested in our documentation that such cases should work. Adjust the
tests to use only the documented syntax.
Back-patch to 9.4, since without this the TAP tests fail when run with
src/port's getopt_long() implementation.
Michael Paquier
When committing abd94bcac4, I tried to make
it decide what kind of abbreviation to use based only on SIZEOF_DATUM,
without regard to USE_FLOAT8_BYVAL. That attempt was a few bricks short
of a load, so try to fix it, and add a comment explaining what we're
about.
Patch by me; review (but not a full endorsement) by Andrew Gierth.
Commit ed9cc2b5df made it unnecessary to pass
start_nblkno to _hash_splitbucket(), and for that matter unnecessary to
have the internal nblkno variable either. My compiler didn't complain
about that, but some did. I also rearranged the use of oblkno a bit to
make that case more parallel.
Report and initial patch by Petr Jelinek, rearranged a bit by me.
Back-patch to all branches, like the previous patch.
This lets later stages have access to the transformed expression; in
particular it allows DDL-deparsing code during event triggers to pass
the transformed expression to ruleutils.c, so that the complete command
can be deparsed.
This shuffles the timing of the transform calls a bit: previously,
nothing was transformed during parse analysis, and only the
RELKIND_RELATION case was being handled during execution. After this
patch, all expressions are transformed during parse analysis (including
those for relkinds other than RELATION), and the error for other
relation kinds is thrown only during execution. So we do more work than
before to reject some bogus cases. That seems acceptable.
This is useful to control autovacuum log volume, for situations where
monitoring only a set of tables is necessary.
Author: Michael Paquier
Reviewed by: A team led by Naoya Anzai (also including Akira Kurosawa,
Taiki Kondo, Huong Dangminh), Fujii Masao.
