The second portion of the tests had a race condition where it would be
possible for the startup of the dynamic workers to fail, in the event
where the static workers started before them with the library loading in
shared_preload_libraries did not finish to create their respective
schemas. The conflict is caused by the fact that the dynamic and static
workers used the same IDs, overlapping each other, so, for now, switch
the dynamic workers to use different IDs, leading to different schemas
created.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20230728022332.egqzobhskmlf6ntr@awork3.anarazel.de
Commits 83dec5a712 and ff402ae11b taught vacuumdb to reuse
passwords instead of prompting repeatedly. However, the docs still
warn about repeated prompts, and this improvement was not applied
to clusterdb and reindexdb. This commit allows clusterdb and
reindexdb to reuse passwords just like vacuumdb does, and it
expunges the aforementioned warnings from the docs.
Reviewed-by: Gurjeet Singh, Zhang Mingli
Discussion: https://postgr.es/m/20230628045741.GA1813397%40nathanxps13
Commit e7cb7ee14, which introduced the infrastructure for FDWs and
custom scan providers to replace joins with scans, failed to add support
handling of pseudoconstant quals assigned to replaced joins in
createplan.c, leading to an incorrect plan without a gating Result node
when postgres_fdw replaced a join with such a qual.
To fix, we could add the support by 1) modifying the ForeignPath and
CustomPath structs to store the list of RestrictInfo nodes to apply to
the join, as in JoinPaths, if they represent foreign and custom scans
replacing a join with a scan, and by 2) modifying create_scan_plan() in
createplan.c to use that list in that case, instead of the
baserestrictinfo list, to get pseudoconstant quals assigned to the join;
but #1 would cause an ABI break. So fix by modifying the infrastructure
to just disallow replacing joins with such quals.
Back-patch to all supported branches.
Reported by Nishant Sharma. Patch by me, reviewed by Nishant Sharma and
Richard Guo.
Discussion: https://postgr.es/m/CADrsxdbcN1vejBaf8a%2BQhrZY5PXL-04mCd4GDu6qm6FigDZd6Q%40mail.gmail.com
Historically, hba.c limited tokens in the authentication configuration
files (pg_hba.conf and pg_ident.conf) to less than 256 bytes. We have
seen a few reports of this limit causing problems; notably, for
moderately-complex LDAP configurations. Let's get rid of the fixed
limit by using a StringInfo instead of a fixed-size buffer.
This actually takes less code than before, since we can get rid of
a nontrivial error recovery stanza. It's doubtless a hair slower,
but parsing the content of the HBA files should in no way be
performance-critical.
Although this is a pretty straightforward patch, it doesn't seem
worth the risk to back-patch given the small number of complaints
to date. In released branches, we'll just raise MAX_TOKEN to
ameliorate the problem.
Discussion: https://postgr.es/m/1588937.1690221208@sss.pgh.pa.us
This commit moves worker_spi to use TAP tests. sql/worker_spi.sql is
gone, replaced by an equivalent set of queries in a TAP script, without
worker_spi loaded in shared_preload_libraries:
- One query to launch a worker dynamically, relying now on "postgres" as
the default database to connect to.
- Two wait queries with poll_query_until(), one to wait for the worker
schema to be initialized and a second to wait for a tuple processed by
the worker.
- Server reload to accelerate the main loop of the spawned worker.
More coverage is added for workers registered when the library is loaded
with shared_preload_libraries, while on it, checking that these are
connecting to the database set in the GUC worker_spi.database.
A local run of these test is showing that TAP is slightly faster than
the original, while providing more coverage (3.7s vs 4.4s). There was
also some discussions about keeping the SQL tests, but this would
require initializing twice a cluster, increasing the runtime of the
tests up to 5.6s here.
These tests will be expanded more in an upcoming patch aimed at adding
support for custom wait events for the Extension class, still under
discussion, to check the new in-core APIs with and without a library set
in shared_preload_libraries.
Bharath has written the part where shared_preload_libraries is used,
while I have migrated the existing SQL tests to TAP.
Author: Bharath Rupireddy, Michael Paquier
Reviewed-by: Masahiro Ikeda
Discussion: https://postgr.es/m/CALj2ACWR9ncAiDF73unqdJF1dmsA2R0efGXX2624X+YVxcAVWg@mail.gmail.com
9f8377f7a added code to allow COPY FROM insert a column's default value
when the input matches the DEFAULT string specified in the COPY command.
Here we fix some inefficient code which needlessly palloc0'd an array to
store if we should use the default value or input value for the given
column. This array was being palloc0'd and pfree'd once per row. It's
much more efficient to allocate this once and just reset the values once
per row.
Reported-by: Masahiko Sawada
Author: Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoDvDmUQeJtZrau1ovnT_smN940%3DKp6mszNGK3bq9yRN6g%40mail.gmail.com
Backpatch-through: 16, where 9f8377f7a was introduced.
There was already a check on the relation OID, but not its index OID and
the attributes that can be used during the syscache lookups. The two
assertions added by this commit are cheap, and actually useful for
developers to fasten the detection of incorrect data in a new entry
added in the syscache list, as these assertions are triggered during the
initial cache loading (initdb, or just backend startup), not requiring a
syscache that uses the new entry.
While on it, the relation OID check is switched to use OidIsValid().
Author: Aleksander Alekseev
Reviewed-by: Dagfinn Ilmari Mannsåker, Zhang Mingli, Michael Paquier
Discussion: https://postgr.es/m/CAJ7c6TOjUTJ0jxvWY6oJeP2-840OF8ch7qscZQsuVuotXTOS_g@mail.gmail.com
In pg_stat_statements, savepoint names now show up as constants with a
parameter symbol, using as base query string the one added as a new
entry to the PGSS hash table, leading to:
RELEASE $1
ROLLBACK TO $1
SAVEPOINT $1
Applying constants to these query parts is a huge advantage for
workloads that generate randomly savepoint points, like ORMs (Django is
at the origin of this patch). The ODBC driver is a second layer that
likes a lot savepoints, though it does not use a random naming pattern.
A "location" field is added to TransactionStmt, now set only for
savepoints. The savepoint name is ignored by the query jumbling. The
location can be extended to other query patterns, if required, like 2PC
commands. Some tests are added to pg_stat_statements for all the query
patterns supported by the parser.
ROLLBACK, ROLLBACK TO SAVEPOINT and ROLLBACK TRANSACTION TO SAVEPOINT
have the same Node representation, so all these are equivalents. The
same happens for RELEASE and RELEASE SAVEPOINT.
Author: Greg Sabino Mullane
Discussion: https://postgr.es/m/CAKAnmm+2s9PA4OaumwMJReWHk8qvJ_-g1WqxDRDAN1BSUfxyTw@mail.gmail.com
psql's --echo-hidden, --log-file, and --single-step options
generate extra lines to clearly separate queries from other output.
Presently, these extra lines are not valid SQL comments, which
makes them a hazard for anyone trying to copy/paste the decorated
queries into a client or query editor. This commit replaces the
starting and ending asterisks in these extra lines with forward
slashes so that they are valid SQL comments that can be copy/pasted
without incident.
Author: Kirk Wolak
Reviewed-by: Pavel Stehule, Laurenz Albe, Tom Lane, Alvaro Herrera, Andrey Borodin
Discussion: https://postgr.es/m/CACLU5mTFJRJYtbvmZ26txGgmXWQo0hkGhH2o3hEquUPmSbGtBw%40mail.gmail.com
This Patch introduces three SQL standard JSON functions:
JSON()
JSON_SCALAR()
JSON_SERIALIZE()
JSON() produces json values from text, bytea, json or jsonb values,
and has facilitites for handling duplicate keys.
JSON_SCALAR() produces a json value from any scalar sql value,
including json and jsonb.
JSON_SERIALIZE() produces text or bytea from input which containis
or represents json or jsonb;
For the most part these functions don't add any significant new
capabilities, but they will be of use to users wanting standard
compliant JSON handling.
Catversion bumped as this changes ruleutils.c.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby, Álvaro Herrera,
Peter Eisentraut
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
This is to export datum_to_json(), datum_to_jsonb(), and
jsonb_from_cstring(), though the last one is exported as
jsonb_from_text().
A subsequent commit to add new SQL/JSON constructor functions will
need them for calling from the executor.
Discussion: https://postgr.es/m/20230720160252.ldk7jy6jqclxfxkq%40alvherre.pgsql
Commit 5764f611e used dclist_delete_from() to remove the proc from the
wait queue. However, since it doesn't clear dist_node's next/prev to
NULL, it could call RemoveFromWaitQueue() twice: when the process
detects a deadlock and then when cleaning up locks on aborting the
transaction. The waiting lock information is cleared in the first
call, so it led to a crash in the second call.
Backpatch to v16, where the change was introduced.
Bug: #18031
Reported-by: Justin Pryzby, Alexander Lakhin
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/ZKy4AdrLEfbqrxGJ%40telsasoft.com
Discussion: https://postgr.es/m/18031-ebe2d08cb405f6cc@postgresql.org
Backpatch-through: 16
This gives a way to make a difference between workers registered when
the library is loaded with shared_preload_libraries and when these are
launched dynamically, in ps output or pg_stat_activity.
Extracted from a larger patch by the same author.
Author: Bharath Rupireddy
Reviewed-by: Masahiro Ikeda
Discussion: https://postgr.es/m/CALj2ACWR9ncAiDF73unqdJF1dmsA2R0efGXX2624X+YVxcAVWg@mail.gmail.com
This commit adds a few comments about what LWLockWaitForVar() relies on
when a backend waits for a variable update on its LWLocks for WAL
insertions up to an expected LSN.
First, LWLockWaitForVar() does not include a memory barrier, relying on
a spinlock taken at the beginning of WaitXLogInsertionsToFinish(). This
was hidden behind two layers of routines in lwlock.c. This assumption
is now documented at the top of LWLockWaitForVar(), and detailed at bit
more within LWLockConflictsWithVar().
Second, document why WaitXLogInsertionsToFinish() does not include
memory barriers, relying on a spinlock at its top, which is, per Andres'
input, fine for two different reasons, both depending on the fact that
the caller of WaitXLogInsertionsToFinish() is waiting for a LSN up to a
certain value.
This area's documentation and assumptions could be improved more in the
future, but at least that's a beginning.
Author: Bharath Rupireddy, Andres Freund
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CALj2ACVF+6jLvqKe6xhDzCCkr=rfd6upaGc3477Pji1Ke9G7Bg@mail.gmail.com
Previously, when selecting an usable index for update/delete for the
REPLICA IDENTITY FULL table, in IsIndexOnlyExpression(), we used to
check if all index fields are not expressions. However, it was not
necessary, because it is enough to check if only the leftmost index
field is not an expression (and references the remote table column)
and this check has already been done by
RemoteRelContainsLeftMostColumnOnIdx().
This commit removes IsIndexOnlyExpression() and
RemoteRelContainsLeftMostColumnOnIdx() and all checks for usable
indexes for REPLICA IDENTITY FULL tables are now performed by
IsIndexUsableForReplicaIdentityFull().
Backpatch this to remain the code consistent.
Reported-by: Peter Smith
Reviewed-by: Amit Kapila, Önder Kalacı
Discussion: https://postgr.es/m/CAHut%2BPsGRE5WSsY0jcLHJEoA17MrbP9yy8FxdjC_ZOAACxbt%2BQ%40mail.gmail.com
Backpatch-through: 16
The WAL insertion lock variable insertingAt is currently being read
and written with the help of the LWLock wait list lock to avoid any read
of torn values. This wait list lock can become a point of contention on
a highly concurrent write workloads.
This commit switches insertingAt to a 64b atomic variable that provides
torn-free reads/writes. On platforms without 64b atomic support, the
fallback implementation uses spinlocks to provide the same guarantees
for the values read. LWLockWaitForVar(), through
LWLockConflictsWithVar(), reads the new value to check if it still needs
to wait with a u64 atomic operation. LWLockUpdateVar() updates the
variable before waking up the waiters with an exchange_u64 (full memory
barrier). LWLockReleaseClearVar() now uses also an exchange_u64 to
reset the variable. Before this commit, all these steps relied on
LWLockWaitListLock() and LWLockWaitListUnlock().
This reduces contention on LWLock wait list lock and improves
performance of highly-concurrent write workloads. Here are some
numbers using pg_logical_emit_message() (HEAD at d6677b93) with various
arbitrary record lengths and clients up to 1k on a rather-large machine
(64 vCPUs, 512GB of RAM, 16 cores per sockets, 2 sockets), in terms of
TPS numbers coming from pgbench:
message_size_b | 16 | 64 | 256 | 1024
--------------------+--------+--------+--------+-------
patch_4_clients | 83830 | 82929 | 80478 | 73131
patch_16_clients | 267655 | 264973 | 250566 | 213985
patch_64_clients | 380423 | 378318 | 356907 | 294248
patch_256_clients | 360915 | 354436 | 326209 | 263664
patch_512_clients | 332654 | 321199 | 287521 | 240128
patch_1024_clients | 288263 | 276614 | 258220 | 217063
patch_2048_clients | 252280 | 243558 | 230062 | 192429
patch_4096_clients | 212566 | 213654 | 205951 | 166955
head_4_clients | 83686 | 83766 | 81233 | 73749
head_16_clients | 266503 | 265546 | 249261 | 213645
head_64_clients | 366122 | 363462 | 341078 | 261707
head_256_clients | 132600 | 132573 | 134392 | 165799
head_512_clients | 118937 | 114332 | 116860 | 150672
head_1024_clients | 133546 | 115256 | 125236 | 151390
head_2048_clients | 137877 | 117802 | 120909 | 138165
head_4096_clients | 113440 | 115611 | 120635 | 114361
Bharath has been measuring similar improvements, where the limit of the
WAL insertion lock begins to be felt when more than 256 concurrent
clients are involved in this specific workload.
An extra patch has been discussed to introduce a fast-exit path in
LWLockUpdateVar() when there are no waiters, still this does not
influence the write-heavy workload cases discussed as there are always
waiters. This will be considered separately.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACVF+6jLvqKe6xhDzCCkr=rfd6upaGc3477Pji1Ke9G7Bg@mail.gmail.com
We include the message type while displaying an error context in the
apply worker. Now, while retrieving the message type string if the
message type is unknown we throw an error that will hide the original
error. So, instead, we need to simply return the string indicating an
unknown message type.
Reported-by: Ashutosh Bapat
Author: Euler Taveira, Amit Kapila
Reviewed-by: Ashutosh Bapat
Backpatch-through: 15
Discussion: https://postgr.es/m/CAExHW5suAEDW-mBZt_qu4RVxWZ1vL54-L+ci2zreYWebpzxYsA@mail.gmail.com
Due to the bug LimitAdditionalPins() could return 0, violating
LimitAdditionalPins()'s API ("One additional pin is always allowed"). This
could be hit when setting shared_buffers very low and using a fair amount of
concurrency.
This bug was introduced in 31966b151e.
Author: "Anton A. Melnikov" <aamelnikov@inbox.ru>
Reported-by: "Anton A. Melnikov" <aamelnikov@inbox.ru>
Reported-by: Victoria Shepard
Discussion: https://postgr.es/m/ae46f2fb-5586-3de0-b54b-1bb0f6410ebd@inbox.ru
Backpatch: 16-
Some of the test_decoding test output was extremely wide, because it
deals with massive toasted values, and the aligned mode causes psql to
produce 200kB of whitespace and dashes. Change to unaligned mode
temporarily to avoid that behavior.
Backpatch to 14, where it applies cleanly.
Discussion: https://postgr.es/m/20230405103953.sxleixp3uz5lazst@alvherre.pgsql
Because PostgreSQL::Version is very nuanced about development version
numbers, the comparison to 16beta2 makes it think that that release is
older than 16, therefore applying a database tweak that doesn't work
there (the comparison is only supposed to match when run on version 15).
As suggested by Andrew Dunstan, fix by having AdjustUpgrade.pm public
methods create a separate PostgreSQL::Version object to use for these
comparisons, that only carries the major version number.
While at it, have the same methods ensure that the objects given are of
the expected type.
Backpatch to 16. This module goes all the way back to 9.2, but there's
probably no need for this fix except where betas still live.
Co-authored-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/20230719110504.zbu74o54bqqlsufb@alvherre.pgsql
This commit switches the client-side data generation from INSERT queries
to COPY for the two tables pgbench_branches and pgbench_tellers.
pgbench_accounts was already using COPY.
COPY is a better interface for bulk loading or high latency connections
(this point can be countered with the option for server-side data
generation, still client-side is the default), and measurements have
proved that using it for these two other tables can lead to improvements
during initialization. I did not notice slowdowns at large scale
numbers on a local setup, either, most of the work happening for the
accounts table.
Previously COPY was only used for the pgbench_accounts table because the
amount of data was much larger than the two other tables. The code is
refactored so as all three tables use the same code path to execute the
COPY queries, with a callback to build data rows.
Author: Tristan Partin
Discussion: https://postgr.es/m/CSTU5P82ONZ1.19XFUGHMXHBRY@c3po
The tables created by pgbench rely on a few assumptions for TPC-B, where
the "filler" attribute is used to comply with this benchmark's rules as
well as pgbencn historical behavior. The data generated for each table
uses this filler in a different way:
- pgbench_accounts uses it as a blank-padded empty string.
- pgbench_tellers and pgbench_branches use it as a NULL value.
There were no checks done about the consistency of the data initialized,
and this has showed up while discussing a patch that changes the logic
in charge of the client-side data generation (pgbench documents all that
already in its comments). This commit adds some checks on the data
generated for both the server-side and client-side logic.
Reviewed-by: Tristan Partin
Discussion: https://postgr.es/m/ZLik4oKnqRmVCM3t@paquier.xyz
After 3c90dcd03, try_partitionwise_join's child_joinrelids
variable is read only in an Assert, provoking a compiler
warning in non-assert builds. Rearrange code to avoid the
warning and eliminate unnecessary work in the non-assert case.
Per CI testing (via Jeff Davis and Bharath Rupireddy)
Discussion: https://postgr.es/m/ef0de9713e605451f1b60b30648c5ee900b2394c.camel@j-davis.com
Applying add_outer_joins_to_relids() to a child join doesn't actually
work, even if we've built a SpecialJoinInfo specialized to the child,
because that function will also compare the join's relids to elements
of the main join_info_list, which only deal in regular relids not
child relids. This mistake escaped detection by the existing
partitionwise join tests because they didn't test any cases where
add_outer_joins_to_relids() needs to add additional OJ relids (that
is, any cases where join reordering per identity 3 is possible).
Instead, let's apply adjust_child_relids() to the relids of the parent
join. This requires minor code reordering to collect the relevant
AppendRelInfo structures first, but that's work we'd do shortly anyway.
Report and fix by Richard Guo; cosmetic changes by me
Discussion: https://postgr.es/m/CAMbWs49NCNbyubZWgci3o=_OTY=snCfAPtMnM-32f3mm-K-Ckw@mail.gmail.com
b6e1157e7d made some changes to enforce that
JsonValueExpr.formatted_expr is always set and is the expression that
gives a JsonValueExpr its runtime value, but that's not really
apparent from the comments about and the code manipulating
formatted_expr. This commit fixes that.
Per suggestion from Álvaro Herrera.
Discussion: https://postgr.es/m/20230718155313.3wqg6encgt32adqb%40alvherre.pgsql
Currently, the database name to connect is initialized only when the
module is loaded with shared_preload_libraries, causing any call of
worker_spi_launch() to fail if the library is not loaded for a dynamic
bgworker launch. Rather than making the GUC defining the database to
connect to a PGC_POSTMASTER, this commit switches worker_spi.database to
PGC_SIGHUP, loaded even if the module's library is loaded dynamically
for a worker.
We have been discussing about the integration of more advanced tests in
this module, with and without shared_preload_libraries set, so this
eases a bit the work planned in this area.
No backpatch is done as, while this is a bug, it changes the definition
of worker_spi.database.
Author: Masahiro Ikeda
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/d30d3ea7d21cb7c9e1e3cc47e301f1b6@oss.nttdata.com
If both the passed-in plan pointer and plansource->gplan are
NULL, CachedPlanIsSimplyValid would think that the plan pointer
is possibly-valid and try to dereference it. For the one extant
call site in plpgsql, this situation doesn't normally happen
which is why we've not noticed. However, it appears to be possible
if the previous use of the cached plan failed, as per report from
Justin Pryzby. Add an extra check to prevent crashing.
Back-patch to v13 where this code was added.
Discussion: https://postgr.es/m/ZLlV+STFz1l/WhAQ@telsasoft.com
This adds the X509 attributes notBefore and notAfter to sslinfo
as well as pg_stat_ssl to allow verifying and identifying the
validity period of the current client certificate.
Author: Cary Huang <cary.huang@highgo.ca>
Discussion: https://postgr.es/m/182b8565486.10af1a86f158715.2387262617218380588@highgo.ca
Rather than specifying a validity of 10 000 days into the future
during test certificate generation, this hardcodes the notBefore
and notAfter attributes to known values. This will allow writing
tests on the validity of the certificates without knowing when a
specific certificate was regenerated.
This is done as a prerequisite for an upcoming patch which adds
notBefore and notAfter to pg_stat_ssl and sslinfo.
Discussion: https://postgr.es/m/EE288A58-947E-479A-9D99-C46C273D7A23@yesql.se
When the cluster failed the pg_controldata check for clean shut
down we only reported that it did so, not why. The state of the
cluster can be important information when diagnosing the failed
upgrade attempt, so instead include it in the error message.
Discussion: https://postgr.es/m/E0D5EA16-A085-4753-8DDC-C7055048B439@yesql.se
This essentially removes the JsonbTypeCategory enum and
jsonb_categorize_type() and integrates any jsonb-specific logic that
was in jsonb_categorize_type() into json_categorize_type(), now
moved to jsonfuncs.c. The remaining JsonTypeCategory enum and
json_categorize_type() cover the needs of the callers in both json.c
and jsonb.c. json_categorize_type() has grown a new parameter named
is_jsonb for callers to engage the jsonb-specific behavior of
json_categorize_type().
One notable change in the now exported API of json_categorize_type()
is that it now always returns *outfuncoid even though a caller may
have no need currently to see one.
This is in preparation of later commits to implement additional
SQL/JSON functions.
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
Based on how postgres.h foes the Oid <-> Datum conversion, there is no
existing bugs but let's be consistent. 17 spots have been noticed as
incorrectly passing down Oids rather than Datums. Aleksander got one,
Zhang two and I the rest.
Author: Michael Paquier, Aleksander Alekseev, Zhang Mingli
Discussion: https://postgr.es/m/ZLUhqsqQN1MOaxdw@paquier.xyz
When pg_recvlogical needs to abort on a signal like SIGINT/SIGTERM, it
is expected to exit cleanly as the code documents. However, the code
forgot to clean up the state of the connection before leaving. This
would cause the tool to emit messages like "unexpected termination of
replication stream" error, which is meant for really unexpected
termination or a crash.
The code is refactored to apply the same termination abort operations for
signals, end LSN and keepalive cases, registering a "reason" for the
termination with a message printed under --verbose adapted to the reason
used.
This is arguably a bug, but this has been this way since the tool exists
and the signal termination can now become slower depending on the change
being decoded when the signal is received.
Reported-by: Andres Freund
Author: Bharath Rupireddy
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Cary Huang, Michael
Paquier
Discussion: https://postgr.es/m/20221019213953.htdtzikf4f45ywil@awork3.anarazel.de
b5913f6120 added a parenthesized syntax for CLUSTER, but it
requires specifying a table name. This is unlike commands such as
VACUUM and ANALYZE, which do not require specifying a table in the
parenthesized syntax. This change resolves this inconsistency.
This is preparatory work for a follow-up commit that will move the
unparenthesized syntax to the "Compatibility" section of the
CLUSTER documentation.
Reviewed-by: Melanie Plageman, Michael Paquier
Discussion: https://postgr.es/m/CAAKRu_bc5uHieG1976kGqJKxyWtyQt9yvktjsVX%2Bi7NOigDjOA%40mail.gmail.com
This change moves the unparenthesized syntax for CLUSTER to the end
of the ClusterStmt rules in preparation for a follow-up commit that
will move this syntax to the "Compatibility" section of the CLUSTER
documentation. The documentation for the CLUSTER syntaxes has also
been consolidated.
Suggested-by: Melanie Plageman
Discussion https://postgr.es/m/CAAKRu_bc5uHieG1976kGqJKxyWtyQt9yvktjsVX%2Bi7NOigDjOA%40mail.gmail.com
With the addition of INHERIT and SET options for role grants,
the historical display of role memberships in \du/\dg is woefully
inadequate. Besides those options, there are pre-existing
shortcomings that you can't see the ADMIN option nor the grantor.
To fix this, remove the "Member of" column from \du/\dg altogether
(making that output usefully narrower), and invent a new meta-command
"\drg" that is specifically for displaying role memberships. It
shows one row for each role granted to the selected role(s), with
the grant options and grantor.
We would not normally back-patch such a feature addition post
feature freeze, but in this case the change is mainly driven by
v16 changes in the server, so it seems appropriate to include it
in v16.
Pavel Luzanov, with bikeshedding and review from a lot of people,
but particularly David Johnston
Discussion: https://postgr.es/m/b9be2d0e-a9bc-0a30-492f-a4f68e4f7740@postgrespro.ru
IN and NOT IN work fine on records and arrays, so just say that
they accept "expressions" not "scalar expressions". I think that
that phrasing was meant to say that they don't work on set-returning
expressions, but that's not the common meaning of "scalar".
Revise the description of row-constructor comparisons to make it
perhaps a bit less confusing. (This partially reverts some
dubious wording changes made by commit f56651519.)
Per gripe from Ilya Nenashev. Back-patch to supported branches.
In HEAD and v16, also drop a NOTE about pre-8.2 behavior, which
is hopefully no longer of interest to anybody.
Discussion: https://postgr.es/m/168968062460.632.14303906825812821399@wrigleys.postgresql.org
By default, pg_archivecleanup does not remove backup history files.
These are just few bytes useful for debugging purposes, still keeping
them around can bloat an archive path history files mixed with the WAL
segments if the path has a long history.
This patch adds a new option to control if backup history files are
removed, depending on the oldest segment name to keep around.
While on it, the TAP tests are refactored so as these are now able to
handle lists of files. Each file has a flag to track if it should still
exist or not depending on the oldest segment defined with the command
run.
Author: Atsushi Torikoshi
Reviewed-by: Kyotaro Horiguchi, Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/d660ef741ce3d82f3b4283f1cafd576c@oss.nttdata.com
This commit refactors a bit the main loop of pg_archivecleanup that
handles the removal of old segments, reducing by one its level of
indentation. This will help an incoming patch that adds a new option
related to the segment filtering logic.
Author: Atsushi Torikoshi
Reviewed-by: Kyotaro Horiguchi, Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/d660ef741ce3d82f3b4283f1cafd576c@oss.nttdata.com
The "count" argument of SPI_exec() only limits execution when
the query is actually returning rows. This was not the case
before PG 9.0, so this example was correct when written; but
we missed updating it in commit 2ddc600f8. Extend the example
to show the behavior both with and without RETURNING.
While here, improve the commentary and markup for the rest
of the example.
David G. Johnston and Tom Lane, per report from Curt Kolovson.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CANhYJV6HWtgz_qjx_APfK0PAgLUzY-2vjLuj7i_o=TZF1LAQew@mail.gmail.com
This has been missed in cb0cca1, noticed before buildfarm member koel
has been able to complain while poking at a different patch. Like the
other commit, backpatch all the way down to limit the odds of merge
conflicts.
Backpatch-through: 11
A crash in the middle of a checkpoint with some two-phase state data
already flushed to disk by this checkpoint could cause a follow-up crash
recovery to recover twice the same transaction, once from what has been
found in pg_twophase/ at the beginning of recovery and a second time
when replaying its corresponding record.
This would lead to FATAL failures in the startup process during
recovery, where the same transaction would have a state recovered twice
instead of once:
LOG: recovering prepared transaction 731 from shared memory
LOG: recovering prepared transaction 731 from shared memory
FATAL: lock ExclusiveLock on object 731/0/0 is already held
This issue is fixed by skipping the addition of any 2PC state coming
from a record whose equivalent 2PC state file has already been loaded in
TwoPhaseState at the beginning of recovery by restoreTwoPhaseData(),
which is OK as long as the system has not reached a consistent state.
The timing to get a messed up recovery processing is very racy, and
would very unlikely happen. The thread that has reported the issue has
demonstrated the bug using injection points to force a PANIC in the
middle of a checkpoint.
Issue introduced in 728bd99, so backpatch all the way down.
Reported-by: "suyu.cmj" <mengjuan.cmj@alibaba-inc.com>
Author: "suyu.cmj" <mengjuan.cmj@alibaba-inc.com>
Author: Michael Paquier
Discussion: https://postgr.es/m/109e6994-b971-48cb-84f6-829646f18b4c.mengjuan.cmj@alibaba-inc.com
Backpatch-through: 11
fe-auth.c references CHAR_BIT since commit 3a465cc67, but it
did not #include <limits.h>, which per POSIX is where that
symbol is defined. This escaped notice so far because
(a) on most platforms, <sys/param.h> pulls in <limits.h>,
(b) even if yours doesn't, OpenSSL pulls it in, so compiling
with --with-openssl masks the omission.
Per bug #18026 from Marcel Hofstetter. Back-patch to v16.
Discussion: https://postgr.es/m/18026-d5bb69f79cd16203@postgresql.org
