transform_null_equals is only supposed to affect "foo = NULL" expressions
given directly by the user, not the internal "foo = NULL" expression
generated from CASE-WHEN.
This fixes bug #6242, reported by Sergey. Backpatch to all supported
branches.
A similar problem for pgstattuple() was fixed in April of 2010 by commit
33065ef8bc, but pgstatindex() seems to have
been overlooked.
Back-patch all the way, as with that commit, though not to 7.4 through
8.1, since those are now EOL.
This oversight meant that on Windows, the pg_settings view would not
display source file or line number information for values coming from
postgresql.conf, unless the backend had received a SIGHUP since starting.
In passing, also make the error detection in read_nondefault_variables a
tad more thorough, and fix it to not lose precision on float GUCs (these
changes are already in HEAD as of my previous commit).
Thus, an object referenced in a default expression could be dropped while
the function remained present. This was unaccountably missed in the
original patch to add default parameters for functions. Reported by
Pavel Stehule.
This mode still exists for backwards compatibility, making
sslmode=require the same as sslmode=verify-ca when the file is present,
but not causing an error when it isn't.
Per bug 6189, reported by Srinivas Aji
We were mapping "Central America Standard Time" to "CST6CDT", which seems
entirely wrong, because according to the Olson timezone database noplace
in Central America observes daylight savings time on any regular basis ---
and certainly not according to the USA DST rules that are implied by
"CST6CDT". (Mexico is an exception, but they can be disregarded since
they have a separate timezone name in Windows.) So, map this zone name to
plain "CST6", which will provide a fixed UTC offset.
As written, this patch will also result in mapping "Central America
Daylight Time" to CST6. I considered hacking things so that would still
map to CST6CDT, but it seems it would confuse win32tzlist.pl to put those
two names in separate entries. Since there's little evidence that any
such zone name is used in the wild, much less that CST6CDT would be a good
match for it, I'm not too worried about what we do with it.
Per complaint from Pratik Chirania.
This oversight led to a massive memory leak --- upwards of 10KB per tuple
--- during creation-time verification of an exclusion constraint based on a
GIST index. In most other scenarios it'd just be a leak of 10KB that would
be recovered at end of query, so not too significant; though perhaps the
leak would be noticeable in a situation where a GIST index was being used
in a nestloop inner indexscan. In any case, it's a real leak of long
standing, so patch all supported branches. Per report from Harald Fuchs.
Trailing-zero stripping applied by the FM specifier could strip zeroes
to the left of the decimal point, for a format with no digit positions
after the decimal point (such as "FM999.").
Reported and diagnosed by Marti Raudsepp, though I didn't use his patch.
The code in shift_jis_20042euc_jis_2004() would fetch two bytes even when
only one remained in the string. Since conversion functions aren't
supposed to assume null-terminated input, this poses a small risk of
fetching past the end of memory and incurring SIGSEGV. No such crash has
been identified in the field, but we've certainly seen the equivalent
happen in other code paths, so patch this one all the way back.
Report and patch by Noah Misch.
Since the last couple of columns of pg_type are often NULL,
sizeof(FormData_pg_type) can be an overestimate of the actual size of the
tuple data part. Therefore memcpy'ing that much out of the catalog cache,
as analyze.c was doing, poses a small risk of copying past the end of
memory and incurring SIGSEGV. No such crash has been identified in the
field, but we've certainly seen the equivalent happen in other code paths,
so patch this one all the way back.
Per valgrind testing by Noah Misch, though this is not his proposed patch.
I chose to use SearchSysCacheCopy1 rather than inventing special-purpose
infrastructure for copying only the minimal part of a pg_type tuple.
This example wasn't updated when we changed the behavior of bpcharlen()
in 8.0, nor when we changed the number of parameters taken by the bpchar()
cast function in 7.3. Per report from lsliang.
The $(PERL) macro will be set by configure if it finds perl at all,
but $(perl_privlibexp) isn't configured unless you said --with-perl.
This results in confusing error messages if someone cd's into
src/pl/plperl and tries to build there despite the configure omission,
as reported by Tomas Vondra in bug #6198. Add simple checks to
provide a more useful report, while not disabling other use of the
makefile such as "make clean".
Back-patch to 9.0, which is as far as the patch applies easily.
">" should be ">>". This typo results in failure to use all of the bits
of the provided seed.
This might rise to the level of a security bug if we were relying on
srand48 for any security-critical purposes, but we are not --- in fact,
it's not used at all unless the platform lacks srandom(), which is
improbable. Even on such a platform the exposure seems minimal.
Reported privately by Andres Freund.
ifdef block. It has nothing to do with whether the replacement snprintf
function is used. It caused no live bug, because the replacement snprintf
function is always used on Win32, but it was nevertheless misplaced.
Examination of examples provided by Mark Kirkwood and others has convinced
me that actually commit 7f3eba30c9 was quite
a few bricks shy of a load. The useful part of that patch was clamping
ndistinct for the inner side of a semi or anti join, and the reason why
that's needed is that it's the only way that restriction clauses
eliminating rows from the inner relation can affect the estimated size of
the join result. I had not clearly understood why the clamping was
appropriate, and so mis-extrapolated to conclude that we should clamp
ndistinct for the outer side too, as well as for both sides of regular
joins. These latter actions were all wrong, and are reverted with this
patch. In addition, the clamping logic is now made to affect the behavior
of both paths in eqjoinsel_semi, with or without MCV lists to compare.
When we have MCVs, we suppose that the most common values are the ones
that are most likely to survive the decimation resulting from a lower
restriction clause, so we think of the clamping as eliminating non-MCV
values, or potentially even the least-common MCVs for the inner relation.
Back-patch to 8.4, same as previous fixes in this area.
This patch fixes an oversight in my commit
7f3eba30c9 of 2008-10-23. That patch
accounted for baserel restriction clauses that reduced the number of rows
coming out of a table (and hence the number of possibly-distinct values of
a join variable), but not for join restriction clauses that might have been
applied at a lower level of join. To account for the latter, look up the
sizes of the min_lefthand and min_righthand inputs of the current join,
and clamp with those in the same way as for the base relations.
Noted while investigating a complaint from Ben Chobot, although this in
itself doesn't seem to explain his report.
Back-patch to 8.4; previous versions used different estimation methods
for which this heuristic isn't relevant.
It is possible for VACUUM to scan no pages at all, if the visibility map
shows that all pages are all-visible. In this situation VACUUM has no new
information to report about the relation's tuple density, so it wasn't
changing pg_class.reltuples ... but it updated pg_class.relpages anyway.
That's wrong in general, since there is no evidence to justify changing the
density ratio reltuples/relpages, but it's particularly bad if the previous
state was relpages=reltuples=0, which means "unknown tuple density".
We just replaced "unknown" with "zero". ANALYZE would eventually recover
from this, but it could take a lot of repetitions of ANALYZE to do so if
the relation size is much larger than the maximum number of pages ANALYZE
will scan, because of the moving-average behavior introduced by commit
b4b6923e03.
The only known situation where we could have relpages=reltuples=0 and yet
the visibility map asserts everything's visible is immediately following
a pg_upgrade. It might be advisable for pg_upgrade to try to preserve the
relpages/reltuples statistics; but in any case this code is wrong on its
own terms, so fix it. Per report from Sergey Koposov.
Back-patch to 8.4, where the visibility map was introduced, same as the
previous change.
On closer inspection, whining in restore_toc_entries_parallel is really
much too late for any user-facing error case. The right place to do it
is at the start of RestoreArchive(), before we've done anything interesting
(suh as trying to DROP all the targets ...)
Back-patch to 8.4, where parallel restore was introduced.
If we are unable to do a parallel restore because the input file is stdin
or is otherwise unseekable, we should complain and fail immediately, not
after having done some of the restore. Complaining once per thread isn't
so cool either, and the messages should be worded to make it clear this is
an unsupported case not some weird race-condition bug. Per complaint from
Lonni Friedman.
Back-patch to 8.4, where parallel restore was introduced.
These days, such a response is far more likely to signify a server-side
problem, such as fork failure. Reporting "server does not support SSL"
(in sslmode=require) could be quite misleading. But the results could
be even worse in sslmode=prefer: if the problem was transient and the
next connection attempt succeeds, we'll have silently fallen back to
protocol version 2.0, possibly disabling features the user needs.
Hence, it seems best to just eliminate the assumption that backing off
to non-SSL/2.0 protocol is the way to recover from an "E" response, and
instead treat the server error the same as we would in non-SSL cases.
I tested this change against a pre-7.0 server, and found that there
was a second logic bug in the "prefer" path: the test to decide whether
to make a fallback connection attempt assumed that we must have opened
conn->ssl, which in fact does not happen given an "E" response. After
fixing that, the code does indeed connect successfully to pre-7.0,
as long as you didn't set sslmode=require. (If you did, you get
"Unsupported frontend protocol", which isn't completely off base
given the server certainly doesn't support SSL.)
Since there seems no reason to believe that pre-7.0 servers exist anymore
in the wild, back-patch to all supported branches.
There are assorted situations wherein PQconnectPoll() will abandon a
connection attempt and try again with different parameters (eg, SSL versus
not SSL). However, the code forgot to discard any pending data in libpq's
I/O buffers when doing this. In at least one case (server returns E
message during SSL negotiation), there is unread input data which bollixes
the next connection attempt. I have not checked to see whether this is
possible in the other cases where we close the socket and retry, but it
seems like a matter of good defensive programming to add explicit
buffer-flushing code to all of them.
This is one of several issues exposed by Daniel Farina's report of
misbehavior after a server-side fork failure.
This has been wrong since forever, so back-patch to all supported branches.
tsvector_concat() allocated its result workspace using the "conservative"
estimate of the sum of the two input tsvectors' sizes. Unfortunately that
wasn't so conservative as all that, because it supposed that the number of
pad bytes required could not grow. Which it can, as per test case from
Jesper Krogh, if there's a mix of lexemes with positions and lexemes
without them in the input data. The fix is to assume that we might add
a not-previously-present pad byte for each and every lexeme in the two
inputs; which really is conservative, but it doesn't seem worthwhile to
try to be more precise.
This is an aboriginal bug in tsvector_concat, so back-patch to all
versions containing it.
Per previous experimentation, backtracking slows down lexing performance
significantly (by about a third). It's usually pretty easy to avoid, just
need to have rules that accept an incomplete construct and do whatever the
lexer would have done otherwise.
The backtracking was introduced by the patch that added quoted variable
substitution. Back-patch to 9.0 where that was added.
For an empty index, the pgstatindex() function would compute 0.0/0.0 for
its avg_leaf_density and leaf_fragmentation outputs. On machines that
follow the IEEE float arithmetic standard with any care, that results in
a NaN. However, per report from Rushabh Lathia, Microsoft couldn't
manage to get this right, so you'd get a bizarre error on Windows.
Fix by forcing the results to be NaN explicitly, rather than relying on
the division operator to give that or the snprintf function to print it
correctly. I have some doubts that this is really the most useful
definition, but it seems better to remain backward-compatible with
those platforms for which the behavior wasn't completely broken.
Back-patch to 8.2, since the code is like that in all current releases.
Due to tuple-slot mismanagement, evaluation of WHEN conditions for AFTER
ROW UPDATE triggers could crash if there had been a BEFORE ROW trigger
fired for the same update. Fix by not trying to overload the use of
estate->es_trig_tuple_slot. Per report from Yoran Heling.
Back-patch to 9.0, when trigger WHEN conditions were introduced.
As pointed out by Sergey Koposov, repeated invocations of tbm_lossify can
make building a large tidbitmap into an O(N^2) operation. To fix, make
sure we remove more than the minimum amount of information per call, and
add a fallback path to behave sanely if we're unable to fit the bitmap
within the requested amount of memory.
This has been wrong since the tidbitmap code was written, so back-patch
to all supported branches.
Module initialization functions in Python 3 must have external
linkage, because PyMODINIT_FUNC does dllexport on Windows-like
platforms. Without this change, the build with Python 3 fails on
Windows.
The TID isn't stable enough: we might queue an sinval event before a VACUUM
FULL, and then process it afterwards, when the target tuple no longer has
the same TID. So we must invalidate entries on the basis of hash value
only. The old coding can be shown to result in various bizarre,
hard-to-reproduce errors in the presence of concurrent VACUUM FULLs on
system catalogs, and could easily result in permanent catalog corruption,
up to and including complete loss of tables.
This commit is just a minimal fix that removes the unsafe comparison.
We should remove transmission of the tuple TID from sinval messages
altogether, and then arrange to suppress the extra message in the common
case of a heap_update that doesn't change the key hashvalue. But that's
going to be much more invasive, and will only produce a probably-marginal
performance gain, so it doesn't seem like material for a back-patch.
Back-patch to 9.0. Before that, VACUUM FULL refused to do any tuple moving
if it found any INSERT_IN_PROGRESS or DELETE_IN_PROGRESS tuples (and
CLUSTER would give up altogether), so there was no risk of moving a tuple
that might be the subject of an unsent sinval message.
