Latest versions of Strawberry Perl define USE_THREAD_SAFE_LOCALE, and we
therefore get a handshake error when building against such instances.
The solution is to perform a test to see if USE_THREAD_SAFE_LOCALE is
defined and only define NO_THREAD_SAFE_LOCALE if it isn't.
Backpatch the meson.build fix back to release 16 and apply the same
logic to Mkvcbuild.pm in releases 12 through 16.
Original report of the issue from Muralikrishna Bandaru.
When we are building a hash index that is large enough to need
pre-sorting (larger than either maintenance_work_mem or NBuffers),
the initial sorting phase is interruptible, but the insertion
phase wasn't. Add the missing CHECK_FOR_INTERRUPTS().
Per bug #18616 from Alexander Lakhin. Back-patch to all
supported branches.
Pavel Borisov
Discussion: https://postgr.es/m/18616-acbb9e5caf41e964@postgresql.org
I managed to break this test in two different ways in commit
05036a3155.
First, the output of the new call to tuple_data_split() on the test
sequence is dependent on endianness. This is fixed by setting a
special start value for the test sequence that produces the same
output regardless of the endianness of the machine.
Second, on versions older than v15, the new test case fails under
"force_parallel_mode = regress" with the following error:
ERROR: cannot access temporary tables during a parallel operation
This is because pageinspect's disk-accessing functions are
incorrectly marked PARALLEL SAFE on versions older than v15 (see
commit aeaaf520f4 for details). This one is fixed by changing the
test sequence to be permanent. The only reason it was previously
marked temporary was to avoid needing a DROP SEQUENCE command at
the end of the test. Unlike some other tests in this file, the use
of a permanent sequence here shouldn't result in any test
instability like what was fixed by commit e2933a6e11.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/ZuOKOut5hhDlf_bP%40nathan
Backpatch-through: 12
Since e9931bfb75, ctype_is_c is part of pg_locale_t. Some functions
passed a pg_locale_t and a bool argument separately. This can now be
combined into one argument.
Since some callers call MatchText() with locale 0, it is a bit
confusing whether this is all correct. But it is the case that only
callers that pass a non-zero locale object to MatchText() end up
checking locale->ctype_is_c. To make that flow a bit more
understandable, add the locale argument to MATCH_LOWER() and GETCHAR()
in like_match.c, instead of implicitly taking it from the outer scope.
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://www.postgresql.org/message-id/84d415fc-6780-419e-b16c-61a0ca819e2b@eisentraut.org
Commit e6c45d85dc fixed the behavior of JSON_QUERY() when WITH
CONDITIONAL WRAPPER is used, but the documentation example wasn't
updated to reflect this change. This commit updates the example to
show the correct result.
Per off-list report from Andreas Ulbrich.
Backpatch-through: 17
There are currently no tests in the tree checking that queries using the
extended query protocol are able to map with their query ID.
This can be achieved for some paths of the extended query protocol with
the psql meta-commands \bind or \bind_named, so let's add some tests
based on both.
I have found that to be a useful addition while working on a different
issue.
Discussion: https://postgr.es/m/ZuEt6MOEBSlifBfn@paquier.xyz
Commit 4b82664156 restricted a number of functions provided by
contrib modules to only relations that use the "heap" table access
method. Sequences always use this table access method, but they do
not advertise as such in the pg_class system catalog, so the
aforementioned commit also (presumably unintentionally) removed
support for sequences from some of these functions. This commit
reintroduces said support for sequences to these functions and adds
a couple of relevant tests.
Co-authored-by: Ayush Vatsa
Reviewed-by: Robert Haas, Michael Paquier, Matthias van de Meent
Discussion: https://postgr.es/m/CACX%2BKaP3i%2Bi9tdPLjF5JCHVv93xobEdcd_eB%2B638VDvZ3i%3DcQA%40mail.gmail.com
Backpatch-through: 12
Remove redundant checks for locale->collate_is_c now that we always
have a valid pg_locale_t.
Also, remove pg_locale_deterministic() wrapper, which is no longer
useful after commit e9931bfb75. Just check the field directly,
consistent with other fields in pg_locale_t.
Author: Andreas Karlsson
Discussion: https://postgr.es/m/60929555-4709-40a7-b136-bcb44cff5a3c@proxel.se
The operative check is for a deterministic collation, so the check for
DEFAULT_COLLATION is redundant. Furthermore, it will be wrong if we
ever support a non-deterministic default collation.
Author: Andreas Karlsson
Discussion: https://postgr.es/m/60929555-4709-40a7-b136-bcb44cff5a3c@proxel.se
Discussion of commit ed055d249 revealed that we don't actually
want jsonpath's .string() method to depend on DateStyle, nor
TimeZone either, because the non-"_tz" jsonpath functions are
supposed to be immutable. Potentially we could allow a TimeZone
dependency in the "_tz" variants, but it seems better to just
uniformly define this method as returning the same string that
jsonb text output would do. That's easier to implement too,
saving a couple dozen lines.
Patch by me, per complaint from Peter Eisentraut. Back-patch
to v17 where this feature came in (in 66ea94e8e). Also
back-patch ed055d249 to provide test cases.
Discussion: https://postgr.es/m/5e8879d0-a3c8-4be2-950f-d83aa2af953a@eisentraut.org
This function checks whether a user has specific privileges on a large object,
identified by OID. The user can be provided by name, OID,
or default to the current user. If the specified large object doesn't exist,
the function returns NULL. It raises an error for a non-existent user name.
This behavior is basically consistent with other privilege inquiry functions
like has_table_privilege.
Bump catalog version.
Author: Yugo Nagata
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20240702163444.ab586f6075e502eb84f11b1a@sranhm.sraoss.co.jp
myLargeObjectExists() and LargeObjectExists() had nearly identical code,
except for handling snapshots. This commit renames myLargeObjectExists()
to LargeObjectExistsWithSnapshot() and refactors LargeObjectExists()
to call it internally, reducing duplication.
Author: Yugo Nagata
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20240702163444.ab586f6075e502eb84f11b1a@sranhm.sraoss.co.jp
hashvalidate(), which validates the signatures of support functions
for the hash AM, contained several hardcoded exceptions. For example,
hash/date_ops support function 1 was hashint4(), which would
ordinarily fail validation because the function argument is int4, not
date. But this works internally because int4 and date are of the same
size. There are several more exceptions like this that happen to work
and were allowed historically but would now fail the function
signature validation.
This patch removes those exceptions by providing new support functions
that have the proper declared signatures. They internally share most
of the code with the "wrong" functions they replace, so the behavior
is still the same.
With the exceptions gone, hashvalidate() is now simplified and relies
fully on check_amproc_signature().
hashvarlena() and hashvarlenaextended() are kept in pg_proc.dat
because some extensions currently use them to build hash functions for
their own types, and we need to keep exposing these functions as
"LANGUAGE internal" functions for that to continue to work.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/29c3b746-69e7-482a-b37c-dbbf7e5b009b@eisentraut.org
A few recent JSON aggregates have been added without much consideration
to the existing order. Put these back in alphabetical order (with the
exception of the JSONB variant of each JSON aggregate).
Author: Wolfgang Walther <walther@technowledgy.de>
Reviewed-by: Marlene Reiterer <marlene.reiterer.03@gmail.com>
Discussion: https://postgr.es/m/6a7b910c-3feb-4006-b817-9b4759cb6bb6%40technowledgy.de
Backpatch-through: 16, where these aggregates were added
The RULE privilege for tables was removed in v8.2, but for backward
compatibility, GRANT/REVOKE and privilege functions like
has_table_privilege continued to accept the RULE keyword without
any effect.
After discussions on pgsql-hackers, it was agreed that this compatibility
is no longer needed. Since it's been long enough since the deprecation,
we've decided to fully remove support for RULE privilege,
so GRANT/REVOKE and privilege functions will no longer accept it.
Author: Fujii Masao
Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/976a3581-6939-457f-b947-fc3dc836c083@oss.nttdata.com
When systable_beginscan() and systable_beginscan_ordered() choose an
index scan, they remap the attribute numbers in the passed-in scan
keys to the attribute numbers of the index, and then write those
remapped attribute numbers back into the scan key passed by the
caller. This second part is surprising and gratuitous. It means that
a scan key cannot safely be used more than once (but it might
sometimes work, depending on circumstances). Also, there is no value
in providing these remapped attribute numbers back to the caller,
since they can't do anything with that.
Fix that by making a copy of the scan keys passed by the caller and
make the modifications there.
Also, some code that had to work around the previous situation is
simplified.
Discussion: https://www.postgresql.org/message-id/flat/f8c739d9-f48d-4187-b214-df3391ba41ab@eisentraut.org
This brings more clarity to heapam.c, by cleanly separating all the
logic related to WAL replay and the rest of Heap and Heap2, similarly
to other RMGRs like hash, btree, etc.
The header reorganization is also nice in heapam.c, cutting half of the
headers required.
Author: Li Yong
Reviewed-by: Sutou Kouhei, Michael Paquier
Discussion: https://postgr.es/m/EFE55E65-D7BD-4C6A-B630-91F43FD0771B@ebay.com
1eff8279d added an API to tuplestore.c to allow callers to obtain
storage telemetry data. That API wasn't quite good enough for callers
that perform tuplestore_clear() as the telemetry functions only
accounted for the current state of the tuplestore, not the maximums
before tuplestore_clear() was called.
There's a pending patch that would like to add tuplestore telemetry
output to EXPLAIN ANALYZE for WindowAgg. That node type uses
tuplestore_clear() before moving to the next window partition and we
want to show the maximum space used, not the space used for the final
partition.
Reviewed-by: Tatsuo Ishii, Ashutosh Bapat
Discussion: https://postgres/m/CAApHDvoY8cibGcicLV0fNh=9JVx9PANcWvhkdjBnDCc9Quqytg@mail.gmail.com
Currently, when WITH CONDITIONAL WRAPPER is specified, array wrappers
are applied even to a single SQL/JSON item if it is a scalar JSON
value, but this behavior does not comply with the standard.
To fix, apply wrappers only when there are multiple SQL/JSON items
in the result.
Reported-by: Peter Eisentraut <peter@eisentraut.org>
Author: Peter Eisentraut <peter@eisentraut.org>
Author: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/8022e067-818b-45d3-8fab-6e0d94d03626%40eisentraut.org
Backpatch-through: 17
check_agglevels_and_constraints() asserted that if we find an
aggregate function in an EXPR_KIND_FROM_SUBSELECT expression, the
expression must be in a LATERAL subquery. Alexander Lakhin found a
case where that's not so: because of the odd scoping rules for NEW/OLD
within a rule, a reference to NEW/OLD could cause an aggregate to be
considered top-level even though it's in an unmarked sub-select.
The error message that would be thrown seems sufficiently on-point,
so just remove the Assert. (Hence, this is not a bug for production
builds.)
This Assert was added by me in commit eaccfded9 (9.3 era). It looks
like I put it in to cross-check that the new logic for detecting
misplaced aggregates (using agglevelsup) caught the same cases that a
previous check on p_lateral_active did. So there might have been some
related misbehavior before eaccfded9 ... but that's very ancient
history by now, so I didn't dig any deeper.
Per bug #18608 from Alexander Lakhin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18608-48de0717508ee429@postgresql.org
The index access methods all had similar code that copied the
passed-in scan keys to local storage. They all used memmove() for
that, which is not wrong, but it seems confusing not to use memcpy()
when that would work. Presumably, this was all once copied from
ancient code and never adjusted.
Discussion: https://www.postgresql.org/message-id/flat/f8c739d9-f48d-4187-b214-df3391ba41ab@eisentraut.org
When building a JSON object, the code builds a hash table of keys, to
allow checking if the keys are unique. The uniqueness check and adding
the new key happens in json_unique_check_key(), but this assumes the
pointer to the key remains valid.
Unfortunately, two places passed pointers to keys in a buffer, while
also appending more data (additional key/value pairs) to the buffer.
With enough data the buffer is resized by enlargeStringInfo(), which
calls repalloc(), invalidating the earlier key pointers.
Due to this the uniqueness check may fail with both false negatives and
false positives, producing JSON objects with duplicate keys or failing
to produce a perfectly valid JSON object.
This affects multiple functions that enforce uniqueness of keys, all
introduced in PG16 with the new SQL/JSON:
- json_object_agg_unique / jsonb_object_agg_unique
- json_object / jsonb_objectagg
Existing regression tests did not detect the issue, simply because the
initial buffer size is 1024 and the objects were small enough not to
require the repalloc.
With a sufficiently large object, AddressSanitizer reported the access
to invalid memory immediately. So would valgrind, of course.
Fixed by copying the key into the hash table memory context, and adding
regression tests with enough data to repalloc the buffer. Backpatch to
16, where the functions were introduced.
Reported by Alexander Lakhin. Investigation and initial fix by Junwang
Zhao, with various improvements and tests by me.
Reported-by: Alexander Lakhin
Author: Junwang Zhao, Tomas Vondra
Backpatch-through: 16
Discussion: https://postgr.es/m/18598-3279ed972a2347c7@postgresql.org
Discussion: https://postgr.es/m/CAEG8a3JjH0ReJF2_O7-8LuEbO69BxPhYeXs95_x7+H9AMWF1gw@mail.gmail.com
Based on a patch by Michael Paquier.
For libpq, use PQExpBuffer instead of StringInfo. This requires us to
track allocation failures so that we can return JSON_OUT_OF_MEMORY as
needed rather than exit()ing.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/d1b467a78e0e36ed85a09adf979d04cf124a9d4b.camel@vmware.com
The first part of the assertion verifying that the passed index must be PK
or RI was incorrectly passing index relation instead of heap relation in
GetRelationIdentityOrPK(). The assertion was not failing because the
second part of the assertion which needs to be performed only when remote
relation has REPLICA_IDENTITY_FULL set was also incorrect.
The change is not backpatched because the current coding doesn't lead to
any failure.
Reported-by: Dilip Kumar
Author: Amit Kapila
Reviewed-by: Vignesh C
Discussion: https://postgr.es/m/CAFiTN-tmguaT1DXbCC+ZomZg-oZLmU6BPhr0po7akQSG6vNJrg@mail.gmail.com
Commit 8004953b5 added a hash table to avoid O(N^2) cost in choosing
unique relation aliases while deparsing a view or rule. It did
nothing about the similar O(N^2) (maybe worse) costs of choosing
unique column aliases within each RTE. However, that's now
demonstrably a bottleneck when deparsing CHECK constraints for wide
tables, so let's use a similar hash table to handle those.
The extra cost of setting up the hash table will not be repaid unless
the table has many columns. I've set this up so that we use the brute
force method if there are less than 32 columns. The exact cutoff is
not too critical, but this value seems good because it results in both
code paths getting exercised by existing regression-test cases.
Patch by me; thanks to David Rowley for review.
Discussion: https://postgr.es/m/2885468.1722291250@sss.pgh.pa.us
We must drop whitespace while parsing the input, else libxml2
will include "blank" nodes that interfere with the desired
indentation behavior. The end result is that we didn't indent
nodes separated by whitespace.
Also, it seems that libxml2 may add a trailing newline when working
in DOCUMENT mode. This is semantically insignificant, so strip it.
This is in the gray area between being a bug fix and a definition
change. However, the INDENT option is still pretty new (since v16),
so I think we can get away with changing this in stable branches.
Hence, back-patch to v16.
Jim Jones
Discussion: https://postgr.es/m/872865a8-548b-48e1-bfcd-4e38e672c1e4@uni-muenster.de
Point out that the output format depends on DateStyle, and test that,
along with testing some cases previously not covered.
In passing, adjust the horology test to verify that the prevailing
DateStyle is 'Postgres, MDY', much as it has long verified the
prevailing TimeZone. We expect pg_regress to have set these up,
and there are multiple regression tests relying on these settings.
Also make the formatting of entries in table 9.50 more consistent.
David Wheeler (marginal additional hacking by me); review by jian he
Discussion: https://postgr.es/m/56955B33-6959-4FDA-A459-F00363ECDFEE@justatheory.com
The environment variable PG_TEST_PG_COMBINEBACKUP_MODE has been
available since 35a7b288b9, but was not set by any built-in CI tasks.
This commit modifies two of the CI tasks to use the alternative modes,
to exercise the pg_combinebackup code.
The Linux task uses --copy-file-range, macOS uses --clone.
This is not an exhaustive test of combinations. The supported modes
depend on the operating system and filesystem, and it would be nice to
test all supported combinations. Right now we have just one task for
each OS, and it doesn't seem worth adding more just for this.
Reported-by: Peter Eisentraut
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/48da4a1f-ccd9-4988-9622-24f37b1de2b4%40eisentraut.org
In case of torn UTF8 in the input data we might end up going
past the end of the string since we don't account for length.
While validation won't be performed on a sequence with a NULL
byte it's better to avoid going past the end to beging with.
Fix by taking the length into consideration.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CAOYmi+mTnmM172g=_+Yvc47hzzeAsYPy2C4UBY3HK9p-AXNV0g@mail.gmail.com
The only current implementation is for btree where it calls
_bt_getrootheight(). Other index types can now also use this to pass
information to their amcostestimate routine. Previously, btree was
hardcoded and other index types could not hook into the optimizer at
this point.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
When generating window_pathkeys, distinct_pathkeys, or sort_pathkeys,
we failed to realize that the grouping/ordering expressions might be
nullable by grouping sets. As a result, we may incorrectly deem that
the PathKeys are redundant by EquivalenceClass processing and thus
remove them from the pathkeys list. That would lead to wrong results
in some cases.
To fix this issue, we mark the grouping expressions nullable by
grouping sets if that is the case. If the grouping expression is a
Var or PlaceHolderVar or constructed from those, we can just add the
RT index of the RTE_GROUP RTE to the existing nullingrels field(s);
otherwise we have to add a PlaceHolderVar to carry on the nullingrel
bit.
However, we have to manually remove this nullingrel bit from
expressions in various cases where these expressions are logically
below the grouping step, such as when we generate groupClause pathkeys
for grouping sets, or when we generate PathTarget for initial input to
grouping nodes.
Furthermore, in set_upper_references, the targetlist and quals of an
Agg node should have nullingrels that include the effects of the
grouping step, ie they will have nullingrels equal to the input
Vars/PHVs' nullingrels plus the nullingrel bit that references the
grouping RTE. In order to perform exact nullingrels matches, we also
need to manually remove this nullingrel bit.
Bump catversion because this changes the querytree produced by the
parser.
Thanks to Tom Lane for the idea to invent a new kind of RTE.
Per reports from Geoff Winkless, Tobias Wendorff, Richard Guo from
various threads.
Author: Richard Guo
Reviewed-by: Ashutosh Bapat, Sutou Kouhei
Discussion: https://postgr.es/m/CAMbWs4_dp7e7oTwaiZeBX8+P1rXw4ThkZxh1QG81rhu9Z47VsQ@mail.gmail.com
If there are subqueries in the grouping expressions, each of these
subqueries in the targetlist and HAVING clause is expanded into
distinct SubPlan nodes. As a result, only one of these SubPlan nodes
would be converted to reference to the grouping key column output by
the Agg node; others would have to get evaluated afresh. This is not
efficient, and with grouping sets this can cause wrong results issues
in cases where they should go to NULL because they are from the wrong
grouping set. Furthermore, during re-evaluation, these SubPlan nodes
might use nulled column values from grouping sets, which is not
correct.
This issue is not limited to subqueries. For other types of
expressions that are part of grouping items, if they are transformed
into another form during preprocessing, they may fail to match lower
target items. This can also lead to wrong results with grouping sets.
To fix this issue, we introduce a new kind of RTE representing the
output of the grouping step, with columns that are the Vars or
expressions being grouped on. In the parser, we replace the grouping
expressions in the targetlist and HAVING clause with Vars referencing
this new RTE, so that the output of the parser directly expresses the
semantic requirement that the grouping expressions be gotten from the
grouping output rather than computed some other way. In the planner,
we first preprocess all the columns of this new RTE and then replace
any Vars in the targetlist and HAVING clause that reference this new
RTE with the underlying grouping expressions, so that we will have
only one instance of a SubPlan node for each subquery contained in the
grouping expressions.
Bump catversion because this changes the querytree produced by the
parser.
Thanks to Tom Lane for the idea to invent a new kind of RTE.
Per reports from Geoff Winkless, Tobias Wendorff, Richard Guo from
various threads.
Author: Richard Guo
Reviewed-by: Ashutosh Bapat, Sutou Kouhei
Discussion: https://postgr.es/m/CAMbWs4_dp7e7oTwaiZeBX8+P1rXw4ThkZxh1QG81rhu9Z47VsQ@mail.gmail.com
This change makes the code slightly easier to reason about, because
there is actually no need to know if a specific caller of one of these
routines should fail hard on a PANIC, or just let it go through with a
DEBUG2.
The only caller of XLogFileReadAnyTLI() used DEBUG2, and XLogFileRead()
has never used its emode. This can be simplified since 1bb2558046
that has introduced XLogFileReadAnyTLI(), splitting both.
Author: Yugo Nagata
Discussion: https://postgr.es/m/20240906201043.a640f3b44e755d4db2b6943e@sraoss.co.jp
This change adds WAL usage reporting to the output of ANALYZE VERBOSE
and autoanalyze reports. It aligns the analyze output with VACUUM,
providing consistency. Additionally, it aids in troubleshooting cases
where WAL records are generated during analyze operations.
Author: Anthonin Bonnefoy
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAO6_Xqr__kTTCLkftqS0qSCm-J7_xbRG3Ge2rWhucxQJMJhcRA%40mail.gmail.com
Previously this code used PageGetHeapFreeSpace on heap pages,
and usually used PageGetFreeSpace on index pages (though for some
reason GetHashPageStats used PageGetExactFreeSpace instead).
The difference is that those functions subtract off the size of
a line pointer, and PageGetHeapFreeSpace has some additional
rules about returning zero if adding another line pointer would
require exceeding MaxHeapTuplesPerPage. Those things make sense
when testing to see if a new tuple can be put on the page, but
they seem pretty strange for pure statistics collection.
Additionally, statapprox_heap had a special rule about counting
a "new" page as being fully available space. This also seems
strange, because it's not actually usable until VACUUM or some
such process initializes the page. Moreover, it's inconsistent
with what pgstat_heap does, which is to count such a page as
having zero free space. So make it work like pgstat_heap, which
as of this patch unconditionally calls PageGetExactFreeSpace.
This is more of a definitional change than a bug fix, so no
back-patch. The module's documentation doesn't define exactly
what "free space" means either, so we left that as-is.
Frédéric Yhuel, reviewed by Rafia Sabih and Andreas Karlsson.
Discussion: https://postgr.es/m/3a18f843-76f6-4a84-8cca-49537fefa15d@dalibo.com
SPI_connect/SPI_connect_ext have not returned any value other than
SPI_OK_CONNECT since commit 1833f1a1c in v10; any errors are thrown
via ereport. (The most likely failure is out-of-memory, which has
always been thrown that way, so callers had better be prepared for
such errors.) This makes it somewhat pointless to check these
functions' result, and some callers within our code haven't been
bothering; indeed, the only usage example within spi.sgml doesn't
bother. So it's likely that the omission has propagated into
extensions too.
Hence, let's standardize on not checking, and document the return
value as historical, while not actually changing these functions'
behavior. (The original proposal was to change their return type
to "void", but that would needlessly break extensions that are
conforming to the old practice.) This saves a small amount of
boilerplate code in a lot of places.
Stepan Neretin
Discussion: https://postgr.es/m/CAMaYL5Z9Uk8cD9qGz9QaZ2UBJFOu7jFx5Mwbznz-1tBbPDQZow@mail.gmail.com
The existing function PQprotocolVersion() does not include the minor
version of the protocol. In preparation for pending work that will
bump that number for the first time, add a new function to provide it
to clients that may care, using the (major * 10000 + minor)
convention already used by PQserverVersion().
Jacob Champion based on earlier work by Jelte Fennema-Nio
Discussion: http://postgr.es/m/CAOYmi+mM8+6Swt1k7XsLcichJv8xdhPnuNv7-02zJWsezuDL+g@mail.gmail.com
As introduced by f9900df5f9, a REINDEX CONCURRENTLY job done for an
index with predicates or expressions would set PROC_IN_SAFE_IC in its
MyProc->statusFlags, causing it to be ignored by other concurrent
operations.
Such concurrent index rebuilds should never be ignored, as a predicate
or an expression could call a user-defined function that accesses a
different table than the table where the index is rebuilt.
A test that uses injection points is added, backpatched down to 17.
Michail has proposed a different test, but I have added something
simpler with more coverage.
Oversight in f9900df5f9.
Author: Michail Nikolaev
Discussion: https://postgr.es/m/CANtu0oj9A3kZVduFTG0vrmGnKB+DCHgEpzOp0qAyOgmks84j0w@mail.gmail.com
Backpatch-through: 14
When the ON ERROR / ON EMPTY behavior is to return NULL, returning
NULL directly from ExecEvalJsonExprPath() suffices. Therefore, there's
no need to create separate steps to check the error/empty flag or
those to evaluate the the constant NULL expression. This speeds up
common cases because the default ON ERROR / ON EMPTY behavior for
JSON_QUERY() and JSON_VALUE() is to return NULL. However, these steps
are necessary if the RETURNING type is a domain, as constraints on the
domain may need to be checked.
Reported-by: Jian He <jian.universality@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CACJufxEo4sUjKCYtda0_qt9tazqqKPmF1cqhW9KBOUeJFqQd2g@mail.gmail.com
Backpatch-through: 17
In label_sort_with_costsize, the cost_sort function is called with the
parameters 'input_disabled_nodes' and 'input_cost' in the wrong order.
This does not cause any plan diffs in the regression tests, because
label_sort_with_costsize is only used to label the Sort node nicely
for EXPLAIN, and cost numbers are not displayed in regression tests.
Oversight in e22253467. Fixed by passing arguments in the right
order.
Per report from Alexander Lakhin running UBSan.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/a9b7231d-68bc-f117-a07c-96688f3e6aef@gmail.com
This commit adds two callbacks in pgstats to have a better control of
the flush timing of pgstat_report_stat(), whose operation depends on the
three PGSTAT_*_INTERVAL variables:
- have_fixed_pending_cb(), to check if a stats kind has any pending
data waiting for a flush. This is used as a fast path if there are no
pending statistics to flush, and this check is done for fixed-numbered
statistics only if there are no variable-numbered statistics to flush.
A flush will need to happen if at least one callback reports any pending
data.
- flush_fixed_cb(), to do the actual flush.
These callbacks are currently used by the SLRU, WAL and IO statistics,
generalizing the concept for all stats kinds (builtin and custom).
The SLRU and IO stats relied each on one global variable to determine
whether a flush should happen; these are now local to pgstat_slru.c and
pgstat_io.c, cleaning up a bit how the pending flush states are tracked
in pgstat.c.
pgstat_flush_io() and pgstat_flush_wal() are still required, but we do
not need to check their return result anymore.
Reviewed-by: Bertrand Drouvot, Kyotaro Horiguchi
Discussion: https://postgr.es/m/ZtaVO0N-aTwiAk3w@paquier.xyz
Looking up a nonexistent user ID would lead to a null pointer
dereference. That's unlikely to happen here, but perhaps
not impossible.
Thinko in commit 4d5111b3f, noticed by Coverity.
The following routines are changed to use the syscache entries added for
pg_extension in 490f869d92:
- get_extension_oid()
- get_extension_name()
- get_extension_schema()
A catalog scan is costly and could easily lead to a noticeable
performance impact when called once or more per query, so this is going
to be helpful for developers for extension data lookups.
Author: Andrei Lepikhov
Reviewed-by: Jelte Fennema-Nio
Discussion: https://postgr.es/m/529295b2-6ba9-4dae-acd1-20a9c6fb8f9a@gmail.com
Instead always fetch the locale and look at the ctype_is_c field.
hba.c relies on regexes working for the C locale without needing
catalog access, which worked before due to a special case for
C_COLLATION_OID in lc_ctype_is_c(). Move the special case to
pg_set_regex_collation() now that lc_ctype_is_c() is gone.
Author: Andreas Karlsson
Discussion: https://postgr.es/m/60929555-4709-40a7-b136-bcb44cff5a3c@proxel.se
