Add explicit collation on the trigger name to avoid locale dependencies.
Also restrict the tables selected, to avoid interference from
concurrently running tests.
Since we now support the server side handler for git over https (so
we're no longer using the "dumb protocol"), make https the primary
choice for cloning the repository, and the git protocol the secondary
choice.
In passing, also change the links to git-scm.com from http to https.
Reviewed by Stefan Kaltenbrunner and David G. Johnston
This patch adds the ability to use "RANGE offset PRECEDING/FOLLOWING"
frame boundaries in window functions. We'd punted on that back in the
original patch to add window functions, because it was not clear how to
do it in a reasonably data-type-extensible fashion. That problem is
resolved here by adding the ability for btree operator classes to provide
an "in_range" support function that defines how to add or subtract the
RANGE offset value. Factoring it this way also allows the operator class
to avoid overflow problems near the ends of the datatype's range, if it
wishes to expend effort on that. (In the committed patch, the integer
opclasses handle that issue, but it did not seem worth the trouble to
avoid overflow failures for datetime types.)
The patch includes in_range support for the integer_ops opfamily
(int2/int4/int8) as well as the standard datetime types. Support for
other numeric types has been requested, but that seems like suitable
material for a follow-on patch.
In addition, the patch adds GROUPS mode which counts the offset in
ORDER-BY peer groups rather than rows, and it adds the frame_exclusion
options specified by SQL:2011. As far as I can see, we are now fully
up to spec on window framing options.
Existing behaviors remain unchanged, except that I changed the errcode
for a couple of existing error reports to meet the SQL spec's expectation
that negative "offset" values should be reported as SQLSTATE 22013.
Internally and in relevant parts of the documentation, we now consistently
use the terminology "offset PRECEDING/FOLLOWING" rather than "value
PRECEDING/FOLLOWING", since the term "value" is confusingly vague.
Oliver Ford, reviewed and whacked around some by me
Discussion: https://postgr.es/m/CAGMVOdu9sivPAxbNN0X+q19Sfv9edEPv=HibOJhB14TJv_RCQg@mail.gmail.com
LogicalTapeFreeze() may write out its first block when it is dirty but
not full, and then immediately read the first block back in from its
BufFile as a BLCKSZ-width block. This can only occur in rare cases
where very few tuples were written out, which is currently only
possible with parallel external tuplesorts. To avoid valgrind
complaints, tell it to treat the tail of logtape.c's buffer as
defined.
Commit 9da0cc3528 exposed this problem
but did not create it. LogicalTapeFreeze() has always tended to write
out some amount of garbage bytes, but previously never wrote less than
one block of data in total, so the problem was masked.
Per buildfarm members lousyjack and skink.
Peter Geoghegan, based on a suggestion from Tom Lane and me. Some
comment revisions by me.
Up to now, useful info for writing a new btree opclass has been buried
in the backend's nbtree/README file. Let's move it into the SGML docs,
in preparation for extending it with info about "in_range" functions
in the upcoming window RANGE patch.
To do this, I chose to create a new chapter for btree indexes in Part VII
(Internals), parallel to the chapters that exist for the newer index AMs.
This is a pretty short chapter as-is. At some point somebody might care
to flesh it out with more detail about btree internals, but that is
beyond the scope of my ambition for today.
Discussion: https://postgr.es/m/23141.1517874668@sss.pgh.pa.us
The previous code assumed that we'd always succeed in creating
child-joins for a joinrel for which partition-wise join was considered,
but that's not guaranteed, at least in the case where dummy rels
are involved.
Ashutosh Bapat, with some wordsmithing by me.
Discussion: http://postgr.es/m/CAFjFpRf8=uyMYYfeTBjWDMs1tR5t--FgOe2vKZPULxxdYQ4RNw@mail.gmail.com
pg_upgrade has always attempted to ensure that the transient dump files
it creates are inaccessible except to the owner. However, refactoring
in commit 76a7650c4 broke that for the file containing "pg_dumpall -g"
output; since then, that file was protected according to the process's
default umask. Since that file may contain role passwords (hopefully
encrypted, but passwords nonetheless), this is a particularly unfortunate
oversight. Prudent users of pg_upgrade on multiuser systems would
probably run it under a umask tight enough that the issue is moot, but
perhaps some users are depending only on pg_upgrade's umask changes to
protect their data.
To fix this in a future-proof way, let's just tighten the umask at
process start. There are no files pg_upgrade needs to write at a
weaker security level; and if there were, transiently relaxing the
umask around where they're created would be a safer approach.
Report and patch by Tom Lane; the idea for the fix is due to Noah Misch.
Back-patch to all supported branches.
Security: CVE-2018-1053
Failure to advance the list pointer while reading partition expressions
from a list results in invoking an input function with inappropriate data,
possibly leading to crashes or, with carefully crafted input, disclosure
of arbitrary backend memory.
Bug discovered independently by Álvaro Herrera and David Rowley.
This patch is by Álvaro but owes something to David's proposed fix.
Back-patch to v10 where the issue was introduced.
Security: CVE-2018-1052
We don't need to set up the shared space for hash join instrumentation data
if instrumentation hasn't been requested. Let's follow the example of the
similar Sort node code and save a few cycles by skipping that when we can.
This reverts commit d59ff4ab3 and instead allows us to use the safer choice
of passing noError = false to shm_toc_lookup in ExecHashInitializeWorker,
since if we reach that call there should be a TOC entry to be found.
Thomas Munro
Discussion: https://postgr.es/m/E1ehkoZ-0005uW-43%40gemulon.postgresql.org
One or another author of commit 5bcf389ec seems to have thought that
computing an offset from a NULL pointer would yield another NULL pointer.
There may possibly be architectures where that works, but common machines
don't work like that. Per a quick code review of places calling
shm_toc_lookup and not using noError = false.
Commit 445dbd82a basically missed the point of commit d46633506,
which was that we shouldn't allow shm_toc_lookup() failure to lead
to a core dump or assertion crash, because the odds of such a
failure should never be considered negligible. It's correct that
we can't expect the PARALLEL_KEY_ERROR_QUEUE TOC entry to be there
if we have no workers. But if we have no workers, we're not going
to do anything in this function with the lookup result anyway,
so let's just skip it. That lets the code use the easy-to-prove-safe
noError=false case, rather than anything requiring effort to review.
Back-patch to v10, like the previous commit.
Discussion: https://postgr.es/m/3647.1517601675@sss.pgh.pa.us
Investigation of 2d2d06b7e2 revealed that
identity values were not applied in some further cases, including
logical replication subscribers, VALUES RTEs, and ALTER TABLE ... ADD
COLUMN. To fix all that, apply the identity column expression in
build_column_default() instead of repeating the same logic at each call
site.
For ALTER TABLE ... ADD COLUMN ... IDENTITY, the previous coding
completely ignored that existing rows for the new column should have
values filled in from the identity sequence. The coding using
build_column_default() fails for this because the sequence ownership
isn't registered until after ALTER TABLE, and we can't do it before
because we don't have the column in the catalog yet. So we specially
remember in ColumnDef the sequence name that we decided on and build a
custom NextValueExpr using that.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
To make this work, tuplesort.c and logtape.c must also support
parallelism, so this patch adds that infrastructure and then applies
it to the particular case of parallel btree index builds. Testing
to date shows that this can often be 2-3x faster than a serial
index build.
The model for deciding how many workers to use is fairly primitive
at present, but it's better than not having the feature. We can
refine it as we get more experience.
Peter Geoghegan with some help from Rushabh Lathia. While Heikki
Linnakangas is not an author of this patch, he wrote other patches
without which this feature would not have been possible, and
therefore the release notes should possibly credit him as an author
of this feature. Reviewed by Claudio Freire, Heikki Linnakangas,
Thomas Munro, Tels, Amit Kapila, me.
Discussion: http://postgr.es/m/CAM3SWZQKM=Pzc=CAHzRixKjp2eO5Q0Jg1SoFQqeXFQ647JiwqQ@mail.gmail.com
Discussion: http://postgr.es/m/CAH2-Wz=AxWqDoVvGU7dq856S4r6sJAj6DBn7VMtigkB33N5eyg@mail.gmail.com
Remove partition_bound_cmp() and partition_bound_bsearch(), whose
void * argument could be, depending on the situation, of any of
three different types: PartitionBoundSpec *, PartitionRangeBound *,
Datum *.
Instead, introduce separate bound-searching functions for each
situation: partition_list_bsearch, partition_range_bsearch,
partition_range_datum_bsearch, and partition_hash_bsearch. This
requires duplicating the code for binary search, but it makes the
code much more type safe, involves fewer branches at runtime, and
at least in my opinion, is much easier to understand.
Along the way, add an option to partition_range_datum_bsearch
allowing the number of keys to be specified, so that we can search
for partitions based on a prefix of the full list of partition
keys. This is important for pending work to improve partition
pruning.
Amit Langote, per a suggestion from me.
Discussion: http://postgr.es/m/CA+TgmoaVLDLc8=YESRwD32gPhodU_ELmXyKs77gveiYp+JE4vQ@mail.gmail.com
Once this function has been called, we know that all workers have
started and attached to their error queues -- so if any of them
subsequently exit uncleanly, we'll be sure to throw an ERROR promptly.
Otherwise, users of the ParallelContext machinery must be careful not
to wait forever for a worker that has failed to start. Parallel query
manages to work without needing this for reasons explained in new
comments added by this patch, but it's a useful primitive for other
parallel operations, such as the pending patch to make creating a
btree index run in parallel.
Amit Kapila, revised by me. Additional review by Peter Geoghegan.
Discussion: http://postgr.es/m/CAA4eK1+e2MzyouF5bg=OtyhDSX+=Ao=3htN=T-r_6s3gCtKFiw@mail.gmail.com
Add into the ALTER TABLE synopsis the definition of
partition_bound_spec, column_constraint, index_parameters and
exclude_element.
Initial patch by Lætitia Avrot, with further improvements by Amit
Langote and Thomas Munro.
Discussion: https://postgr.es/m/flat/27ec4df3-d1ab-3411-f87f-647f944897e1%40lab.ntt.co.jp
Issuing 'quit'/'exit' in an empty psql buffer exits psql. Issuing
'quit'/'exit' in a non-empty psql buffer alone on a line with no prefix
whitespace issues a hint on how to exit.
Also add similar 'help' hints for 'help' in a non-empty psql buffer.
Reported-by: Everaldo Canuto
Discussion: https://postgr.es/m/flat/CALVFHFb-C_5_94hueWg6Dd0zu7TfbpT7hzsh9Zf0DEDOSaAnfA%40mail.gmail.com
Author: original author Robert Haas, modified by me
Technically, pg_upgrade's --old-datadir and --new-datadir are
configuration directories, not necessarily data directories. This is
reflected in the 'postgres' manual page, so do the same for pg_upgrade.
Reported-by: Yves Goergen
Bug: 14898
Discussion: https://postgr.es/m/20171110220912.31513.13322@wrigleys.postgresql.org
Backpatch-through: 10
The old code generated always generated a constraint of the form
col = ANY(ARRAY[val1, val2, ...]), but that's invalid when col is an
array type. Instead, generate col = val when there's only one value,
col = val1 OR col = val2 OR ... when there are multiple values and
col is of array type, and the old form when there are multiple values
and col is not of an array type.
As a side benefit, this makes constraint exclusion able to prune
a list partition declared to accept a single Boolean value, which
didn't work before.
Amit Langote, reviewed by Etsuro Fujita
Discussion: http://postgr.es/m/97267195-e235-89d1-a41a-c110198dfce9@lab.ntt.co.jp
Separate the parts specific to the SSL library from the general logic.
The previous code structure was
open_client_SSL()
calls verify_peer_name_matches_certificate()
calls verify_peer_name_matches_certificate_name()
calls wildcard_certificate_match()
and was completely in fe-secure-openssl.c. The new structure is
open_client_SSL() [openssl]
calls pq_verify_peer_name_matches_certificate() [generic]
calls pgtls_verify_peer_name_matches_certificate_guts() [openssl]
calls openssl_verify_peer_name_matches_certificate_name() [openssl]
calls pq_verify_peer_name_matches_certificate_name() [generic]
calls wildcard_certificate_match() [generic]
Move the generic functions into a new file fe-secure-common.c, so the
calls generally go fe-connect.c -> fe-secure.c -> fe-secure-${impl}.c ->
fe-secure-common.c, although there is a bit of back-and-forth between
the last two.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
pg_hba_file_rules erroneously reported this as scram-sha256. Fix that.
To avoid future errors and confusion, also adjust documentation links
and internal symbols to have a separator between "sha" and "256".
Reported-by: Christophe Courtois <christophe.courtois@dalibo.com>
Author: Michael Paquier <michael.paquier@gmail.com>
Commit 4bbf6edfbd added a test case,
but it turns out that the test case doesn't reliably test for the
bug, and in the context of the regression test suite did not because
ANALYZE had not been run.
Report and patch by Etsuro Fujita. I added a comment along lines
previously suggested by Tom Lane.
Discussion: http://postgr.es/m/5A6195D8.8060206@lab.ntt.co.jp
It's a common task to evaluate a qual and reset the corresponding
expression context. Currently that requires storing the result of the
qual eval, resetting the context, and then reacting on the result. As
that's awkward several places only reset the context next time through
a node. That's not great, so introduce a helper that evaluates and
resets.
It's a bit ugly that it currently uses MemoryContextReset() instead of
ResetExprContext(), but that seems easier than reordering all of
executor.h.
Author: Andres Freund
Discussion: https://postgr.es/m/20180109222544.f7loxrunqh3xjl5f@alap3.anarazel.de
There's never any value in giving a fully specified cache key to
SearchCatCacheList: you might as well call SearchCatCache instead,
since there could be only one match. So the maximum useful number of
key arguments is one less than the supported number of key columns.
We might as well remove the useless extra argument and save some few
bytes per call site, as well as a cycle or so per call.
I believe the reason it was coded like this is that originally, callers
had to write out all the dummy arguments in each call, and so it seemed
less confusing if SearchCatCache and SearchCatCacheList took the same
number of key arguments. But since commit e26c539e9, callers only write
their live arguments explicitly, making that a non-factor; and there's
surely been enough time for third-party modules to adapt to that coding
style. So this is only an ABI break not an API break for callers.
Per discussion with Oliver Ford, this might also make it less confusing
how to use SearchCatCacheList correctly.
Discussion: https://postgr.es/m/27788.1517069693@sss.pgh.pa.us
ExecPushExprSlots didn't initialize ExprEvalStep's resvalue/resnull
steps as it didn't use them. That caused wrong valgrind warnings for
an upcoming patch, so zero-intialize.
Also zero-initialize all scratch ExprEvalStep's allocated on the
stack, to avoid issues with similar future omissions of non-critial
data.
