The code wrote a value into the caller's field[] array before checking
to see if there was room, which of course is backwards. Per report from
Michael Paquier.
I fixed the equivalent bug in the backend's version of this code way back
in 630684d3a1, but failed to think about ecpg's copy. Fortunately
this doesn't look like it would be exploitable for anything worse than a
core dump: an external attacker would have no control over the single word
that gets written.
Before version 9.4, we didn't require sprintf to support the %z length
modifier. Use %lu instead.
Reported by Peter Eisentraut. Apply to 9.3 and earlier.
Most zones in the Russian Federation are subtracting one or two hours
as of 2014-10-26. Update the meanings of the abbreviations IRKT, KRAT,
MAGT, MSK, NOVT, OMST, SAKT, VLAT, YAKT, YEKT to match.
The IANA timezone database has adopted abbreviations of the form AxST/AxDT
for all Australian time zones, reflecting what they believe to be current
majority practice Down Under. These names do not conflict with usage
elsewhere (other than ACST for Acre Summer Time, which has been in disuse
since 1994). Accordingly, adopt these names into our "Default" timezone
abbreviation set. The "Australia" abbreviation set now contains only
CST,EAST,EST,SAST,SAT,WST, all of which are thought to be mostly historical
usage. Note that SAST has also been changed to be South Africa Standard
Time in the "Default" abbreviation set.
Add zone abbreviations SRET (Asia/Srednekolymsk) and XJT (Asia/Urumqi),
and use WSST/WSDT for western Samoa.
Also a DST law change in the Turks & Caicos Islands (America/Grand_Turk),
and numerous corrections for historical time zone data.
This updates known_abbrevs.txt to be what it should have been already,
were my -P patch not broken; and updates some tznames/ entries that
missed getting any love in previous timezone data updates because zic
failed to flag the change of abbreviation.
The non-cosmetic updates:
* Remove references to "ADT" as "Arabia Daylight Time", an abbreviation
that's been out of use since 2007; therefore, claiming there is a conflict
with "Atlantic Daylight Time" doesn't seem especially helpful. (We have
left obsolete entries in the files when they didn't conflict with anything,
but that seems like a different situation.)
* Fix entirely incorrect GMT offsets for CKT (Cook Islands), FJT, FJST
(Fiji); we didn't even have them on the proper side of the date line.
(Seems to have been aboriginal errors in our tznames data; there's no
evidence anything actually changed recently.)
* FKST (Falkland Islands Summer Time) is now used all year round, so
don't mark it as a DST abbreviation.
* Update SAKT (Sakhalin) to mean GMT+11 not GMT+10.
In cosmetic changes, I fixed a bunch of wrong (or at least obsolete)
claims about abbreviations not being present in the zic files, and
tried to be consistent about how obsolete abbreviations are labeled.
Note the underlying timezone/data files are still at release 2014e;
this is just trying to get us in sync with what those files actually
say before we go to the next update.
The quick hack I added to zic to dump out currently-in-use timezone
abbreviations turns out to have a nasty bug: within each zone, it was
printing the last "struct ttinfo" to be *defined*, not necessarily the
last one in use. This was mainly a problem in zones that had changed the
meaning of their zone abbreviation (to another GMT offset value) and later
changed it back.
As a result of this error, we'd missed out updating the tznames/ files
for some jurisdictions that have changed their zone abbreviations since
the tznames/ files were originally created. I'll address the missing data
updates in a separate commit.
When there are cost-delay-related storage options set for a table,
trying to make that table participate in the autovacuum cost-limit
balancing algorithm produces undesirable results: instead of using the
configured values, the global values are always used,
as illustrated by Mark Kirkwood in
http://www.postgresql.org/message-id/52FACF15.8020507@catalyst.net.nz
Since the mechanism is already complicated, just disable it for those
cases rather than trying to make it cope. There are undesirable
side-effects from this too, namely that the total I/O impact on the
system will be higher whenever such tables are vacuumed. However, this
is seen as less harmful than slowing down vacuum, because that would
cause bloat to accumulate. Anyway, in the new system it is possible to
tweak options to get the precise behavior one wants, whereas with the
previous system one was simply hosed.
This has been broken forever, so backpatch to all supported branches.
This might affect systems where cost_limit and cost_delay have been set
for individual tables.
The page splitting code would go into infinite recursion if you try to
insert an index tuple that doesn't fit even on an empty page.
Per analysis and suggested fix by Andrew Gierth. Fixes bug #11555, reported
by Bryan Seitz (analysis happened over IRC). Backpatch to all supported
versions.
As of commit a87c72915 (which later got backpatched as far as 9.1),
we're explicitly supporting the notion that append relations can be
nested; this can occur when UNION ALL constructs are nested, or when
a UNION ALL contains a table with inheritance children.
Bug #11457 from Nelson Page, as well as an earlier report from Elvis
Pranskevichus, showed that there were still nasty bugs associated with such
cases: in particular the EquivalenceClass mechanism could try to generate
"join" clauses connecting an appendrel child to some grandparent appendrel,
which would result in assertion failures or bogus plans.
Upon investigation I concluded that all current callers of
find_childrel_appendrelinfo() need to be fixed to explicitly consider
multiple levels of parent appendrels. The most complex fix was in
processing of "broken" EquivalenceClasses, which are ECs for which we have
been unable to generate all the derived equality clauses we would like to
because of missing cross-type equality operators in the underlying btree
operator family. That code path is more or less entirely untested by
the regression tests to date, because no standard opfamilies have such
holes in them. So I wrote a new regression test script to try to exercise
it a bit, which turned out to be quite a worthwhile activity as it exposed
existing bugs in all supported branches.
The present patch is essentially the same as far back as 9.2, which is
where parameterized paths were introduced. In 9.0 and 9.1, we only need
to back-patch a small fragment of commit 5b7b5518d, which fixes failure to
propagate out the original WHERE clauses when a broken EC contains constant
members. (The regression test case results show that these older branches
are noticeably stupider than 9.2+ in terms of the quality of the plans
generated; but we don't really care about plan quality in such cases,
only that the plan not be outright wrong. A more invasive fix in the
older branches would not be a good idea anyway from a plan-stability
standpoint.)
DetermineSleepTime() was previously called without blocked
signals. That's not good, because it allows signal handlers to
interrupt its workings.
DetermineSleepTime() was added in 9.3 with the addition of background
workers (da07a1e856), where it only read from
BackgroundWorkerList.
Since 9.4, where dynamic background workers were added (7f7485a0cd),
the list is also manipulated in DetermineSleepTime(). That's bad
because the list now can be persistently corrupted if modified by both
a signal handler and DetermineSleepTime().
This was discovered during the investigation of hangs on buildfarm
member anole. It's unclear whether this bug is the source of these
hangs or not, but it's worth fixing either way. I have confirmed that
it can cause crashes.
It luckily looks like this only can cause problems when bgworkers are
actively used.
Discussion: 20140929193733.GB14400@awork2.anarazel.de
Backpatch to 9.3 where background workers were introduced.
The COPY documentation incorrectly stated, for the PROGRAM case,
that we read from stdin and wrote to stdout. Fix that, and improve
consistency by referring to the 'PostgreSQL' user instead of the
'postgres' user, as is done in the rest of the COPY documentation.
Pointed out by Peter van Dijk.
Back-patch to 9.3 where COPY .. PROGRAM was introduced.
Without this fix, parallel restore of a schema-only dump can deadlock,
because when the dump is schema-only, the dependency will still be
pointing at the TABLE item rather than the TABLE DATA item.
Robert Haas and Tom Lane
Some compilers don't automatically search the current directory for
included files. 9cc2c182fc fixed that for builds from tarballs by
adding an include to the source directory. But that doesn't work when
the scanner is generated in the VPATH directory. Use the same search
path as the other parsers in the tree.
One compiler that definitely was affected is solaris' sun cc.
Backpatch to 9.1 which introduced using an actual parser for
replication commands.
When the number of allowed iterations is limited (either a "?" quantifier
or a bound expression), the last sub-match has to reach to the end of the
target string. The previous coding here first tried the shortest possible
match (one character, usually) and then gave up and back-tracked if that
didn't work, typically leading to failure to match overall, as shown in
bug #11478 from Christoph Berg. The minimum change to fix that would be to
not decrement k before "goto backtrack"; but that would be a pretty stupid
solution, because we'd laboriously try each possible sub-match length
before finally discovering that only ending at the end can work. Instead,
force the sub-match endpoint limit up to the end for even the first
shortest() call if we cannot have any more sub-matches after this one.
Bug introduced in my rewrite that added the iterdissect logic, commit
173e29aa5d. The shortest-first search code
was too closely modeled on the longest-first code, which hasn't got this
issue since it tries a match reaching to the end to start with anyway.
Back-patch to all affected branches.
This has been broken since commit af7914c662,
which added the EXPLAIN (TIMING) option. Although that commit included
updates to auto_explain, they evidently weren't tested very carefully,
because the code failed to print node timings even when it should, due to
failure to set es.timing in the ExplainState struct. Reported off-list by
Neelakanth Nadgir of Salesforce.
In passing, clean up the documentation for auto_explain's options a
little bit, including re-ordering them into what seems to me a more
logical order.
x86's memory barrier assembly was marked as clobbering "memory" but
not "cc" even though 'addl' sets various flags. As it turns out gcc on
x86 implicitly assumes "cc" on every inline assembler statement, so
it's not a bug. But as that's poorly documented and might get copied
to architectures or compilers where that's not the case, it seems
better to be precise.
Discussion: 20140919100016.GH4277@alap3.anarazel.de
To keep the code common, backpatch to 9.2 where explicit memory
barriers were introduced.
The documentation used to suggest setting this parameter with ALTER ROLE
SET, but that never worked, so replace it with a working suggestion.
Reported-by: Kyotaro Horiguchi <horiguchi.kyotaro@lab.ntt.co.jp>
In psql, expanded mode was not being displayed correctly when using
the normal ascii or unicode linestyles and border set to '3'. Now,
per the documentation, border '3' is really only sensible for HTML
and LaTeX formats, however, that's no excuse for ascii/unicode to
break in that case, and provisions had been made for psql to cleanly
handle this case (and it did, in non-expanded mode).
This was broken when ascii/unicode was initially added a good five
years ago because print_aligned_vertical_line wasn't passed in the
border setting being used by print_aligned_vertical but instead was
given the whole printTableContent. There really isn't a good reason
for vertical_line to have the entire printTableContent structure, so
just pass in the printTextFormat and border setting (similar to how
this is handled in horizontal_line).
Pointed out by Pavel Stehule, fix by me.
Back-patch to all currently-supported versions.
The code for raising a NUMERIC value to an integer power wasn't very
careful about large powers. It got an outright wrong answer for an
exponent of INT_MIN, due to failure to consider overflow of the Abs(exp)
operation; which is fixable by using an unsigned rather than signed
exponent value after that point. Also, even though the number of
iterations of the power-computation loop is pretty limited, it's easy for
the repeated squarings to result in ridiculously enormous intermediate
values, which can take unreasonable amounts of time/memory to process,
or even overflow the internal "weight" field and so produce a wrong answer.
We can forestall misbehaviors of that sort by bailing out as soon as the
weight value exceeds what will fit in int16, since then the final answer
must overflow (if exp > 0) or underflow (if exp < 0) the packed numeric
format.
Per off-list report from Pavel Stehule. Back-patch to all supported
branches.
Some Sparc CPUs can be run in various coherence models, ranging from
RMO (relaxed) over PSO (partial) to TSO (total). Solaris has always
run CPUs in TSO mode while in userland, but linux didn't use to and
the various *BSDs still don't. Unfortunately the sparc TAS/S_UNLOCK
were only correct under TSO. Fix that by adding the necessary memory
barrier instructions. On sparcv8+, which should be all relevant CPUs,
these are treated as NOPs if the current consistency model doesn't
require the barriers.
Discussion: 20140630222854.GW26930@awork2.anarazel.de
Will be backpatched to all released branches once a few buildfarm
cycles haven't shown up problems. As I've no access to sparc, this is
blindly written.
psql's \s (print command history) doesn't work at all with recent libedit
versions when printing to the terminal, because libedit tries to do an
fchmod() on the target file which will fail if the target is /dev/tty.
(We'd already noted this in the context of the target being /dev/null.)
Even before that, it didn't work pleasantly, because libedit likes to
encode the command history file (to ensure successful reloading), which
renders it nigh unreadable, not to mention significantly different-looking
depending on exactly which libedit version you have. So let's forget using
write_history() for this purpose, and instead print the data ourselves,
using logic similar to that used to iterate over the history for newline
encoding/decoding purposes.
While we're at it, insert the ability to use the pager when \s is printing
to the terminal. This has been an acknowledged shortcoming of \s for many
years, so while you could argue it's not exactly a back-patchable bug fix
it still seems like a good improvement. Anyone who's seriously annoyed
at this can use "\s /dev/tty" or local equivalent to get the old behavior.
Experimentation with this showed that the history iteration logic was
actually rather broken when used with libedit. It turns out that with
libedit you have to use previous_history() not next_history() to advance
to more recent history entries. The easiest and most robust fix for this
seems to be to make a run-time test to verify which function to call.
We had not noticed this because libedit doesn't really need the newline
encoding logic: its own encoding ensures that command entries containing
newlines are reloaded correctly (unlike libreadline). So the effective
behavior with recent libedits was that only the oldest history entry got
newline-encoded or newline-decoded. However, because of yet other bugs in
history_set_pos(), some old versions of libedit allowed the existing loop
logic to reach entries besides the oldest, which means there may be libedit
~/.psql_history files out there containing encoded newlines in more than
just the oldest entry. To ensure we can reload such files, it seems
appropriate to back-patch this fix, even though that will result in some
incompatibility with older psql versions (ie, multiline history entries
written by a psql with this fix will look corrupted to a psql without it,
if its libedit is reasonably up to date).
Stepan Rutz and Tom Lane
The old claim is from my commit d06ebdb8d3 of
2000-07-17, but it seems to have been a plain old thinko; sum(float4) has
been distinct from sum(float8) since Berkeley days. Noted by KaiGai Kohei.
While at it, mention the existence of sum(money), which is also of
embarrassingly ancient vintage.
Errors detected using Topy (https://github.com/intgr/topy), all
changes verified by hand and some manual tweaks added.
Marti Raudsepp
Individual changes backpatched, where applicable, as far as 9.0.
In commit 45e02e3232, we intentionally
disallowed updates on individual elements of oidvector columns. While that
still seems like a sane idea in the abstract, we (I) forgot that citext's
"upgrade from unpackaged" script did in fact perform exactly such updates,
in order to fix the problem that citext indexes should have a collation
but would not in databases dumped or upgraded from pre-9.1 installations.
Even if we wanted to add casts to allow such updates, there's no practical
way to do so in the back branches, so the only real alternative is to make
citext's kluge even klugier. In this patch, I cast the oidvector to text,
fix its contents with regexp_replace, and cast back to oidvector. (Ugh!)
Since the aforementioned commit went into all active branches, we have to
fix this in all branches that contain the now-broken update script.
Per report from Eric Malm.
Some of the many error messages introduced in 458857cc missed 'FROM
unpackaged'. Also e016b724 and 45ffeb7e forgot to quote extension
version numbers.
Backpatch to 9.1, just like 458857cc which introduced the messages. Do
so because the error messages thrown when the wrong command is copy &
pasted aren't easy to understand.
Programs need execute permission on a DLL file to load it. MSYS
"install" ignores the mode argument, and our Cygwin build statically
links libpq into programs. That explains the lack of buildfarm trouble.
Back-patch to 9.0 (all supported versions).
The old text explained what happened if we didn't have working int64
arithmetic. Since that case has been explicitly rejected by configure
since 8.4.3, documenting it in the 9.x branches can only produce confusion.
PG_RETURN_BOOL() should only be used in functions following the V1 SQL
function API. This coding accidentally fails to fail since letting the
compiler coerce the Datum representation of bool back to plain bool
does give the right answer; but that doesn't make it a good idea.
Back-patch to older branches just to avoid unnecessary code divergence.
FreeBSD hasn't made any use of kern.ipc.semmap since 1.1, and newer
releases reject attempts to set it altogether; so stop recommending
that it be adjusted. Per bug #11161.
Back-patch to all supported branches. Before 9.3, also incorporate
commit 7a42dff47, which touches the same text and for some reason
was not back-patched at the time.
Previously the help message described that -m is an option for
"stop", "restart" and "promote" commands in pg_ctl. But actually
that's not an option for "promote". So this commit fixes that
incorrect description in the help message.
Back-patch to 9.3 where the incorrect description was added.
Specifically this commit updates forkname_to_number() so that the HINT
message includes "init" fork, and also adds the description of "init" fork
into pg_relation_size() document.
This is a part of the commit 2d00190495
which has fixed the same oversight in master and 9.4. Back-patch to
9.1 where "init" fork was added.
The initialization fork was added in 9.1, but has not been taken into
consideration in documents of get_raw_page function in pageinspect and
storage layout. This commit fixes those oversights.
get_raw_page can read not only a table but also an index, etc. So it
should be documented that the function can read any relation. This commit
also fixes the document of pageinspect that way.
Back-patch to 9.1 where those oversights existed.
Vik Fearing, review by MauMau
The user documentation was vague and not entirely accurate about how
we treat domain inputs for ambiguous operators/functions. Clarify
that, and add an example and some commentary. Per a recent question
from Adam Mackler.
It's acted like this ever since we added domains, so back-patch
to all supported branches.
In commit 0ca6bda8e7, I rewrote the json.c
code that decided how to convert SQL data types into JSON values, so that
it no longer relied on typcategory which is a pretty untrustworthy guide
to the output format of user-defined datatypes. However, I overlooked the
fact that CREATE DOMAIN inherits typcategory from the base type, so that
the old coding did have the desirable property of treating domains like
their base types --- but only in some cases, because not all its decisions
turned on typcategory. The version of the patch that went into 9.4 and
up did a getBaseType() call to ensure that domains were always treated
like their base types, but I omitted that from the older branches, because
it would result in a behavioral change for domains over json or hstore;
a change that's arguably a bug fix, but nonetheless a change that users
had not asked for. What I overlooked was that this meant that domains
over numerics and boolean were no longer treated like their base types,
and that we *did* get a complaint about, ie bug #11103 from David Grelaud.
So let's do the getBaseType() call in the older branches as well, to
restore their previous behavior in these cases. That means 9.2 and 9.3
will now make these decisions just like 9.4. We could probably kluge
things to still ignore the domain's base type if it's json etc, but that
seems a bit silly.
Such cases are disallowed by the SQL spec, and even if we wanted to allow
them, the semantics seem ambiguous: how should the FK columns be matched up
with the columns of a unique index? (The matching could be significant in
the presence of opclasses with different notions of equality, so this issue
isn't just academic.) However, our code did not previously reject such
cases, but instead would either fail to match to any unique index, or
generate a bizarre opclass-lookup error because of sloppy thinking in the
index-matching code.
David Rowley
Previously, TOAST tables only required in the new cluster could cause
oid conflicts if they were auto-numbered and a later conflicting oid had
to be assigned.
Backpatch through 9.3
autovacuum_multixact_freeze_max_age was added as a pg_ctl start
parameter in 9.3.X to prevent autovacuum from running. However, only
some 9.3.X releases have autovacuum_multixact_freeze_max_age as it was
added in a minor PG 9.3 release. It also isn't needed because -b turns
off autovacuum in 9.1+.
Without this fix, trying to upgrade from an early 9.3 release to 9.4
would fail.
Report by EDB
Backpatch through 9.3
In 9.2, pg_receivexlog with verbose option has emitted the messages
at the end of each WAL file. But the commit 0b63291 suppressed such
messages by mistake. This commit fixes the bug so that pg_receivexlog
--verbose outputs such messages again.
Back-patch to 9.3 where the bug was added.
When autovacuum is nominally off, we will still launch autovac workers
to vacuum tables that are at risk of XID wraparound. But after we'd done
that, an autovac worker would proceed to autovacuum every table in the
targeted database, if they meet the usual thresholds for autovacuuming.
This is at best pretty unexpected; at worst it delays response to the
wraparound threat. Fix it so that if autovacuum is nominally off, we
*only* do forced vacuums and not any other work.
Per gripe from Andrey Zhidenkov. This has been like this all along,
so back-patch to all supported branches.
InitProcess() relies on IsBackgroundWorker to decide whether the PGPROC
for a new backend should be taken from ProcGlobal's freeProcs or from
bgworkerFreeProcs. In EXEC_BACKEND builds, InitProcess() is called
sooner than in non-EXEC_BACKEND builds, and IsBackgroundWorker wasn't
getting initialized soon enough.
Report by Noah Misch. Diagnosis and fix by me.
There were several oversights in recovery code where COMMIT/ABORT PREPARED
records were ignored:
* pg_last_xact_replay_timestamp() (wasn't updated for 2PC commits)
* recovery_min_apply_delay (2PC commits were applied immediately)
* recovery_target_xid (recovery would not stop if the XID used 2PC)
The first of those was reported by Sergiy Zuban in bug #11032, analyzed by
Tom Lane and Andres Freund. The bug was always there, but was masked before
commit d19bd29f07, because COMMIT PREPARED
always created an extra regular transaction that was WAL-logged.
Backpatch to all supported versions (older versions didn't have all the
features and therefore didn't have all of the above bugs).
