ReorderBufferImmediateInvalidation() executes invalidation messages in
an aborted transaction. However, RelationFlushRelation sometimes
required a valid resource owner, to temporarily increment the refcount
of the relache entry. Commit b8bff07daa worked around that in the main
subtransaction abort function, AbortSubTransaction(), but missed this
similar case in ReorderBufferImmediateInvalidation().
To fix, introduce a separate function to invalidate a relcache
entry. It does the same thing as RelationClearRelation(rebuild==true)
does when outside a transaction, but can be called without
incrementing the refcount.
Add regression test. Before this fix, it failed with:
ERROR: ResourceOwnerEnlarge called after release started
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://www.postgresql.org/message-id/e56be7d9-14b1-664d-0bfc-00ce9772721c@gmail.com
After further review, we want to move in the direction of always
quoting GUC names in error messages, rather than the previous (PG16)
wildly mixed practice or the intermittent (mid-PG17) idea of doing
this depending on how possibly confusing the GUC name is.
This commit applies appropriate quotes to (almost?) all mentions of
GUC names in error messages. It partially supersedes a243569bf6 and
8d9978a717, which had moved things a bit in the opposite direction
but which then were abandoned in a partial state.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAHut%2BPv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w%40mail.gmail.com
There are some problems with the new way to handle these constraints
that were detected at the last minute, and require fixes that appear too
invasive to be doing this late in the cycle. Revert this (again) for
now, we'll try again with these problems fixed.
The following commits are reverted:
b0e96f3119 Catalog not-null constraints
9b581c5341 Disallow changing NO INHERIT status of a not-null constraint
d0ec2ddbe0 Fix not-null constraint test
ac22a9545c Move privilege check to the right place
b0f7dd915b Check stack depth in new recursive functions
3af7217942 Update information_schema definition for not-null constraints
c3709100be Fix propagating attnotnull in multiple inheritance
d9f686a72e Fix restore of not-null constraints with inheritance
d72d32f52d Don't try to assign smart names to constraints
0cd711271d Better handle indirect constraint drops
13daa33fa5 Disallow NO INHERIT not-null constraints on partitioned tables
d45597f72f Disallow direct change of NO INHERIT of not-null constraints
21ac38f498 Fix inconsistencies in error messages
Discussion: https://postgr.es/m/202405110940.joxlqcx4dogd@alvherre.pgsql
This commit introduces a new SQL function pg_sync_replication_slots()
which is used to synchronize the logical replication slots from the
primary server to the physical standby so that logical replication can be
resumed after a failover or planned switchover.
A new 'synced' flag is introduced in pg_replication_slots view, indicating
whether the slot has been synchronized from the primary server. On a
standby, synced slots cannot be dropped or consumed, and any attempt to
perform logical decoding on them will result in an error.
The logical replication slots on the primary can be synchronized to the
hot standby by using the 'failover' parameter of
pg-create-logical-replication-slot(), or by using the 'failover' option of
CREATE SUBSCRIPTION during slot creation, and then calling
pg_sync_replication_slots() on standby. For the synchronization to work,
it is mandatory to have a physical replication slot between the primary
and the standby aka 'primary_slot_name' should be configured on the
standby, and 'hot_standby_feedback' must be enabled on the standby. It is
also necessary to specify a valid 'dbname' in the 'primary_conninfo'.
If a logical slot is invalidated on the primary, then that slot on the
standby is also invalidated.
If a logical slot on the primary is valid but is invalidated on the
standby, then that slot is dropped but will be recreated on the standby in
the next pg_sync_replication_slots() call provided the slot still exists
on the primary server. It is okay to recreate such slots as long as these
are not consumable on standby (which is the case currently). This
situation may occur due to the following reasons:
- The 'max_slot_wal_keep_size' on the standby is insufficient to retain
WAL records from the restart_lsn of the slot.
- 'primary_slot_name' is temporarily reset to null and the physical slot
is removed.
The slot synchronization status on the standby can be monitored using the
'synced' column of pg_replication_slots view.
A functionality to automatically synchronize slots by a background worker
and allow logical walsenders to wait for the physical will be done in
subsequent commits.
Author: Hou Zhijie, Shveta Malik, Ajin Cherian based on an earlier version by Peter Eisentraut
Reviewed-by: Masahiko Sawada, Bertrand Drouvot, Peter Smith, Dilip Kumar, Nisha Moond, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
Since commit a4ccc1cef, the 'node' and 'alloc_tuple_size' fields of
the ReorderBufferTupleBuf structure are no longer used. This leaves
only the 'tuple' field in the structure. Since keeping a single-field
structure makes little sense, the ReorderBufferTupleBuf is removed
entirely. The code is refactored accordingly.
No back-patching since these are ABI changes in an exposed structure
and functions, and there would be some risk of breaking extensions.
Author: Aleksander Alekseev
Reviewed-by: Amit Kapila, Masahiko Sawada, Reid Thompson
Discussion: https://postgr.es/m/CAD21AoCvnuxiXXfRecp7g9+CeC35POQfhuQeJFr7_9u_Q5jc_Q@mail.gmail.com
This commit adds the failover property to the replication slot. The
failover property indicates whether the slot will be synced to the standby
servers, enabling the resumption of corresponding logical replication
after failover. But note that this commit does not yet include the
capability to sync the replication slot; the subsequent commits will add
that capability.
A new optional parameter 'failover' is added to the
pg_create_logical_replication_slot() function. We will also enable to set
'failover' option for slots via the subscription commands in the
subsequent commits.
The value of the 'failover' flag is displayed as part of
pg_replication_slots view.
Author: Hou Zhijie, Shveta Malik, Ajin Cherian
Reviewed-by: Peter Smith, Bertrand Drouvot, Dilip Kumar, Masahiko Sawada, Nisha Moond, Kuroda, Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
There are a lot of Perl scripts in the tree, mostly code generation
and TAP tests. Occasionally, these scripts produce warnings. These
are probably always mistakes on the developer side (true positives).
Typical examples are warnings from genbki.pl or related when you make
a mess in the catalog files during development, or warnings from tests
when they massage a config file that looks different on different
hosts, or mistakes during merges (e.g., duplicate subroutine
definitions), or just mistakes that weren't noticed because there is a
lot of output in a verbose build.
This changes all warnings into fatal errors, by replacing
use warnings;
by
use warnings FATAL => 'all';
in all Perl files.
Discussion: https://www.postgresql.org/message-id/flat/06f899fd-1826-05ab-42d6-adeb1fd5e200%40eisentraut.org
In test_decoding module, when skip_empty_xacts option was specified, add
stream_start/stop for streaming transactional messages. This makes the
handling of transactional messages stream consistent irrespective of
whether skip_empty_xacts option was specified.
Commit 26dd0284b9 made a similar change for non-streaming messages but
forgot to update the streaming cases.
Author: Peter Smith
Reviewed-by: Amit Kapila
Discussion: http://postgr.es/m/OS0PR01MB5716AEBD2988F8F5E9D5985794DFA@OS0PR01MB5716.jpnprd01.prod.outlook.com
Since its introduction, LogLogicalMessage() (via the SQL interface
pg_logical_emit_message()) has never included a call to XLogFlush(),
causing it to potentially lose messages on a crash when used in
non-transactional mode. This has come up to me as a problem while
playing with ideas to design a test suite for what has become
039_end_of_wal.pl introduced in bae868caf2 by Thomas Munro, because
there are no direct ways to force a WAL flush via SQL.
The default is false, to not flush messages and influence existing
use-cases where this function could be used. If set to true, the
message emitted is flushed before returning back to the caller, making
the message durable on crash. This new option has no effect when using
pg_logical_emit_message() in transactional mode, as the record's flush
is guaranteed by the WAL record generated by the transaction committed.
Two queries of test_decoding are tweaked to cover the new code path for
the flush.
Bump catalog version.
Author: Michael Paquier
Reviewed-by: Andres Freund, Amit Kapila, Fujii Masao, Tung Nguyen, Tomas
Vondra
Discussion: https://postgr.es/m/ZNsdThSe2qgsfs7R@paquier.xyz
The pgoutput module uses a global variable (publish_no_origin) to cache
the action for the origin filter, but we didn't reset the flag when
shutting down the output plugin, so subsequent retries may access the
previous publish_no_origin value.
We fix this by storing the flag in the output plugin's private data.
Additionally, the patch removes the currently unused origin string from the
structure.
For the back branch, to avoid changing the exposed structure, we eliminated the
global variable and instead directly used the origin string for change
filtering.
Author: Hou Zhijie
Reviewed-by: Amit Kapila, Michael Paquier
Backpatch-through: 16
Discussion: http://postgr.es/m/OS0PR01MB571690EF24F51F51EFFCBB0E94FAA@OS0PR01MB5716.jpnprd01.prod.outlook.com
We now create contype='n' pg_constraint rows for not-null constraints.
We propagate these constraints to other tables during operations such as
adding inheritance relationships, creating and attaching partitions and
creating tables LIKE other tables. We also spawn not-null constraints
for inheritance child tables when their parents have primary keys.
These related constraints mostly follow the well-known rules of
conislocal and coninhcount that we have for CHECK constraints, with some
adaptations: for example, as opposed to CHECK constraints, we don't
match not-null ones by name when descending a hierarchy to alter it,
instead matching by column name that they apply to. This means we don't
require the constraint names to be identical across a hierarchy.
For now, we omit them for system catalogs. Maybe this is worth
reconsidering. We don't support NOT VALID nor DEFERRABLE clauses
either; these can be added as separate features later (this patch is
already large and complicated enough.)
psql shows these constraints in \d+.
pg_dump requires some ad-hoc hacks, particularly when dumping a primary
key. We now create one "throwaway" not-null constraint for each column
in the PK together with the CREATE TABLE command, and once the PK is
created, all those throwaway constraints are removed. This avoids
having to check each tuple for nullness when the dump restores the
primary key creation.
pg_upgrading from an older release requires a somewhat brittle procedure
to create a constraint state that matches what would be created if the
database were being created fresh in Postgres 17. I have tested all the
scenarios I could think of, and it works correctly as far as I can tell,
but I could have neglected weird cases.
This patch has been very long in the making. The first patch was
written by Bernd Helmle in 2010 to add a new pg_constraint.contype value
('n'), which I (Álvaro) then hijacked in 2011 and 2012, until that one
was killed by the realization that we ought to use contype='c' instead:
manufactured CHECK constraints. However, later SQL standard
development, as well as nonobvious emergent properties of that design
(mostly, failure to distinguish them from "normal" CHECK constraints as
well as the performance implication of having to test the CHECK
expression) led us to reconsider this choice, so now the current
implementation uses contype='n' again. During Postgres 16 this had
already been introduced by commit e056c557ae, but there were some
problems mainly with the pg_upgrade procedure that couldn't be fixed in
reasonable time, so it was reverted.
In 2016 Vitaly Burovoy also worked on this feature[1] but found no
consensus for his proposed approach, which was claimed to be closer to
the letter of the standard, requiring an additional pg_attribute column
to track the OID of the not-null constraint for that column.
[1] https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Bernd Helmle <mailings@oopsware.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Some of the test_decoding test output was extremely wide, because it
deals with massive toasted values, and the aligned mode causes psql to
produce 200kB of whitespace and dashes. Change to unaligned mode
temporarily to avoid that behavior.
Backpatch to 14, where it applies cleanly.
Discussion: https://postgr.es/m/20230405103953.sxleixp3uz5lazst@alvherre.pgsql
In test_decoding module, when skip_empty_xacts option was specified, add
BEGIN/COMMIT for transactional messages. This makes the handling of
transactional messages consistent irrespective of whether skip_empty_xacts
option was specified.
We decided not to backpatch this change because skip_empty_xacts is
primarily used to have consistent test results across different runs and
this change won't help with that.
Author: Vignesh C
Reviewed-by: Ashutosh Bapat, Hou Zhijie
Discussion: https://postgr.es/m/CAExHW5ujRhbOz6_aTq_jQA8NjeFqq9d_8G9viShWvXx8gdSXiQ@mail.gmail.com
This removes md5() function calls from these test suites:
- bloom
- test_decoding
- isolation
- recovery
- subscription
This covers all remaining test suites where md5() calls were just used
to generate some random data and can be replaced by appropriately
adapted sha256() calls. This will eventually allow these tests to
pass in OpenSSL FIPS mode (which does not allow MD5 use). See also
208bf364a9. Unlike for the main regression tests, I didn't write a
fipshash() wrapper here, because that would have been too repetitive
and wouldn't really save much here. In some cases it was easier to
remove one layer of indirection by changing column types from text to
bytea.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/f9b480b5-e473-d2d1-223a-4b9db30a229a@eisentraut.org
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
Mainly move some detail from errmsg to errdetail, remove explicit
mention of superuser where appropriate, since that is implied in most
permission checks, and make messages more uniform.
Author: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/20230316234701.GA903298@nathanxps13
Currently, there are quite a few places in reorderbuffer.c that tries to
access top-transaction for a subtransaction. This makes the code to access
top-transaction consistent and easier to follow.
Author: Peter Smith
Reviewed-by: Vignesh C, Sawada Masahiko
Discussion: https://postgr.es/m/CAHut+PuCznOyTqBQwjRUu-ibG-=KHyCv-0FTcWQtZUdR88umfg@mail.gmail.com
To run all tests that support running against existing server:
$ meson test --setup running
To run just the main pg_regress tests against existing server:
$ meson test --setup running regress-running/regress
To ensure the 'running' setup continues to work, test it as part of the
freebsd CI task.
Discussion: https://postgr.es/m/CAH2-Wz=XDQcmLoo7RR_i6FKQdDmcyb9q5gStnfuuQXrOGhB2sQ@mail.gmail.com
When the logical decoding restarts from NEW_CID, since there is no
association between the top transaction and its subtransaction, both are
created as top transactions and have the same LSN. This caused the
assertion failure in AssertTXNLsnOrder().
This patch skips the assertion check until we reach the LSN at which we
start decoding the contents of the transaction, specifically
start_decoding_at LSN in SnapBuild. This is okay because we don't
guarantee to make the association between top transaction and
subtransaction until we try to decode the actual contents of transaction.
The ordering of the records prior to the start_decoding_at LSN should have
been checked before the restart.
The other assertion failure is due to the reason that we forgot to track
that we have considered top-level transaction id in the list of catalog
changing transactions that were committed when one of its subtransactions
is marked as containing catalog change.
Reported-by: Tomas Vondra, Osumi Takamichi
Author: Masahiko Sawada, Kuroda Hayato
Reviewed-by: Amit Kapila, Dilip Kumar, Kuroda Hayato, Kyotaro Horiguchi, Masahiko Sawada
Backpatch-through: 10
Discussion: https://postgr.es/m/a89b46b6-0239-2fd5-71a9-b19b1f7a7145%40enterprisedb.com
Discussion: https://postgr.es/m/TYCPR01MB83733C6CEAE47D0280814D5AED7A9%40TYCPR01MB8373.jpnprd01.prod.outlook.com
The generated resource files aren't exactly the same ones as the old
buildsystems generate. Previously "InternalName" and "OriginalFileName" were
mostly wrong / not set (despite being required), but that was hard to fix in
at least the make build. Additionally, the meson build falls back to a
"auto-generated" description when not set, and doesn't set it in a few cases -
unlikely that anybody looks at these descriptions in detail.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in contrib code.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
It has been incorrectly assumed in commit 7f13ac8123 that we can either
purge all or none in the catalog modifying xids list retrieved from a
serialized snapshot. It is quite possible that some of the xids in that
array are old enough to be pruned but not others.
As per buildfarm
Author: Amit Kapila and Masahiko Sawada
Reviwed-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAA4eK1LBtv6ayE+TvCcPmC-xse=DVg=SmbyQD1nv_AaqcpUJEg@mail.gmail.com
Previously, we relied on HEAP2_NEW_CID records and XACT_INVALIDATION
records to know if the transaction has modified the catalog, and that
information is not serialized to snapshot. Therefore, after the restart,
if the logical decoding decodes only the commit record of the transaction
that has actually modified a catalog, we will miss adding its XID to the
snapshot. Thus, we will end up looking at catalogs with the wrong
snapshot.
To fix this problem, this change adds the list of transaction IDs and
sub-transaction IDs, that have modified catalogs and are running during
snapshot serialization, to the serialized snapshot. After restart or
otherwise, when we restore from such a serialized snapshot, the
corresponding list is restored in memory. Now, when decoding a COMMIT
record, we check both the list and the ReorderBuffer to see if the
transaction has modified catalogs.
Since this adds additional information to the serialized snapshot, we
cannot backpatch it. For back branches, we took another approach.
We remember the last-running-xacts list of the decoded RUNNING_XACTS
record after restoring the previously serialized snapshot. Then, we mark
the transaction as containing catalog changes if it's in the list of
initial running transactions and its commit record has
XACT_XINFO_HAS_INVALS. This doesn't require any file format changes but
the transaction will end up being added to the snapshot even if it has
only relcache invalidations. But that won't be a problem since we use
snapshot built during decoding only to read system catalogs.
This commit bumps SNAPBUILD_VERSION because of a change in SnapBuild.
Reported-by: Mike Oh
Author: Masahiko Sawada
Reviewed-by: Amit Kapila, Shi yu, Takamichi Osumi, Kyotaro Horiguchi, Bertrand Drouvot, Ahsan Hadi
Backpatch-through: 10
Discussion: https://postgr.es/m/81D0D8B0-E7C4-4999-B616-1E5004DBDCD2%40amazon.com
This patch adds a new SUBSCRIPTION parameter "origin". It specifies
whether the subscription will request the publisher to only send changes
that don't have an origin or send changes regardless of origin. Setting it
to "none" means that the subscription will request the publisher to only
send changes that have no origin associated. Setting it to "any" means
that the publisher sends changes regardless of their origin. The default
is "any".
Usage:
CREATE SUBSCRIPTION sub1 CONNECTION 'dbname=postgres port=9999'
PUBLICATION pub1 WITH (origin = none);
This can be used to avoid loops (infinite replication of the same data)
among replication nodes.
This feature allows filtering only the replication data originating from
WAL but for initial sync (initial copy of table data) we don't have such a
facility as we can only distinguish the data based on origin from WAL. As
a follow-up patch, we are planning to forbid the initial sync if the
origin is specified as none and we notice that the publication tables were
also replicated from other publishers to avoid duplicate data or loops.
We forbid to allow creating origin with names 'none' and 'any' to avoid
confusion with the same name options.
Author: Vignesh C, Amit Kapila
Reviewed-By: Peter Smith, Amit Kapila, Dilip Kumar, Shi yu, Ashutosh Bapat, Hayato Kuroda
Discussion: https://postgr.es/m/CALDaNm0gwjY_4HFxvvty01BOT01q_fJLKQ3pWP9=9orqubhjcQ@mail.gmail.com
We have some streaming tests that rely on the size of changes which can
fail if there are additional changes like invalidation messages by
background activity like auto analyze. Avoid such failures by increasing
autovacuum_naptime to a reasonably high value (1d).
Author: Dilip Kumar
Backpatch-through: 14
Discussion: https://postgr.es/m/1958043.1650129119@sss.pgh.pa.us
- subscriber stats reset path was untested
- slot stat sreset path for all slots was untested
- pg_stat_database.sessions etc was untested
- pg_stat_reset_shared() was untested, for any kind of shared stats
- pg_stat_reset() was untested
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
In the stats collector days it was hard to write tests for the stats system,
because fundamentally delivery of stats messages over UDP was not
synchronous (nor guaranteed). Now we easily can force pending stats updates to
be flushed synchronously.
This moves stats.sql into a parallel group, there isn't a reason for it to run
in isolation anymore. And it may shake out some bugs.
Bumps catversion.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Soon the stats collector will be no more, with statistics instead getting
stored in shared memory. There are a lot of references to the stats collector
in comments. This commit replaces most of these references with "cumulative
statistics system", with the remaining ones getting replaced as part of
subsequent commits.
This is done separately from the - quite large - shared memory statistics
patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
MERGE performs actions that modify rows in the target table using a
source table or query. MERGE provides a single SQL statement that can
conditionally INSERT/UPDATE/DELETE rows -- a task that would otherwise
require multiple PL statements. For example,
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular tables, partitioned tables and inheritance
hierarchies, including column and row security enforcement, as well as
support for row and statement triggers and transition tables therein.
MERGE is optimized for OLTP and is parameterizable, though also useful
for large scale ETL/ELT. MERGE is not intended to be used in preference
to existing single SQL commands for INSERT, UPDATE or DELETE since there
is some overhead. MERGE can be used from PL/pgSQL.
MERGE does not support targetting updatable views or foreign tables, and
RETURNING clauses are not allowed either. These limitations are likely
fixable with sufficient effort. Rewrite rules are also not supported,
but it's not clear that we'd want to support them.
Author: Pavan Deolasee <pavan.deolasee@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Simon Riggs <simon.riggs@enterprisedb.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Reviewed-by: Peter Geoghegan <pg@bowt.ie> (earlier versions)
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: Japin Li <japinli@hotmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
Discussion: https://postgr.es/m/20201231134736.GA25392@alvherre.pgsql
Some of the test_decoding regression tests are unstable due to modifying
a sequence. The first increment of a sequence after a checkpoint is
always logged (and thus decoded), which makes the output unpredictable.
The runs are usually much shorter than a checkpoint internal, so these
failures are rare, but we've seen a couple of them on animals that are
either slow or are running with valgrind/clobber cache/...
Fixed by skipping sequence decoding in most tests, with the exception of
the test aimed at testing decoding of sequences.
Reported-by: Amita Kapila
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Since commit ffa2e4670, libpq accumulates text in conn->errorMessage
across a whole query cycle. In some situations, we may report more
than one error event within a cycle: the easiest case to reach is
where we report a FATAL error message from the server, and then a
bit later we detect loss of connection. Since, historically, each
error PGresult bears the entire content of conn->errorMessage,
this results in duplication of the FATAL message in any output that
concatenates the contents of the PGresults.
Accumulation in errorMessage still seems like a good idea, especially
in view of the number of places that did ad-hoc error concatenation
before ffa2e4670. So to fix this, let's track how much of
conn->errorMessage has been read out into error PGresults, and only
include new text in later PGresults. The tricky part of that is
to be sure that we never discard an error PGresult once made (else
we'd risk dropping some text, a problem much worse than duplication).
While libpq formerly did that in some code paths, a little bit of
rearrangement lets us postpone making an error PGresult at all until
we are about to return it.
A side benefit of that postponement is that it now becomes practical
to return a dummy static PGresult in cases where we hit out-of-memory
while trying to manufacture an error PGresult. This eliminates the
admittedly-very-rare case where we'd return NULL from PQgetResult,
indicating successful query completion, even though what actually
happened was an OOM failure.
Discussion: https://postgr.es/m/ab4288f8-be5c-57fb-2400-e3e857f53e46@enterprisedb.com
Currently, during UPDATE, the unchanged replica identity key attributes
are not logged separately because they are getting logged as part of the
new tuple. But if they are stored externally then the untoasted values are
not getting logged as part of the new tuple and logical replication won't
be able to replicate such UPDATEs. So we need to log such attributes as
part of the old_key_tuple during UPDATE.
Reported-by: Haiying Tang
Author: Dilip Kumar and Amit Kapila
Reviewed-by: Alvaro Herrera, Haiying Tang, Andres Freund
Backpatch-through: 10
Discussion: https://postgr.es/m/OS0PR01MB611342D0A92D4F4BF26C0F47FB229@OS0PR01MB6113.jpnprd01.prod.outlook.com
Regression tests need to use skip-empty-xacts = false, because there
might be accidental concurrent activity (like autovacuum), particularly
on slow machines. The tests added by 80901b3291 failed to do that in a
couple places, triggering occasional failures on buildfarm.
Fixing the tests however uncovered a bug in the code, because sequence
callbacks did not handle skip-empty-xacts properly. For trasactional
increments we need to check/update the xact_wrote_changes flag, and emit
the BEGIN if it's the first change in the transaction.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20220212220413.b25amklo7t4xb7ni%40alap3.anarazel.de
Commit 0da92dc530 improved the logical decoding infrastructure to handle
sequences, and did various changes to related parts (WAL logging etc.).
But it did not include any implementation of the new callbacks added to
OutputPluginCallbacks.
This extends test_decoding with two callbacks to decode sequences. The
decoding of sequences may be disabled using 'include-sequences', a new
option of the output plugin.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Hannu Krosing, Andres Freund
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
Rather than doing manual book keeping to plan the number of tests to run
in each TAP suite, conclude each run with done_testing() summing up the
the number of tests that ran. This removes the need for maintaning and
updating the plan count at the expense of an accurate count of remaining
during the test suite runtime.
This patch has been discussed a number of times, often in the context of
other patches which updates tests, so a larger number of discussions can
be found in the archives.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/DD399313-3D56-4666-8079-88949DAC870F@yesql.se
