SnapshotNow scans have the undesirable property that, in the face of
concurrent updates, the scan can fail to see either the old or the new
versions of the row. In many cases, we work around this by requiring
DDL operations to hold AccessExclusiveLock on the object being
modified; in some cases, the existing locking is inadequate and random
failures occur as a result. This commit doesn't change anything
related to locking, but will hopefully pave the way to allowing lock
strength reductions in the future.
The major issue has held us back from making this change in the past
is that taking an MVCC snapshot is significantly more expensive than
using a static special snapshot such as SnapshotNow. However, testing
of various worst-case scenarios reveals that this problem is not
severe except under fairly extreme workloads. To mitigate those
problems, we avoid retaking the MVCC snapshot for each new scan;
instead, we take a new snapshot only when invalidation messages have
been processed. The catcache machinery already requires that
invalidation messages be sent before releasing the related heavyweight
lock; else other backends might rely on locally-cached data rather
than scanning the catalog at all. Thus, making snapshot reuse
dependent on the same guarantees shouldn't break anything that wasn't
already subtly broken.
Patch by me. Review by Michael Paquier and Andres Freund.
If the remote database's settings of these GUCs are different from ours,
ambiguous datetime values may be read incorrectly. To fix, temporarily
adopt the remote server's settings while we ingest a query result.
This is not a complete fix, since it doesn't do anything about ambiguous
values in commands sent to the remote server; but there seems little we
can do about that end of it given dblink's entirely textual API for
transmitted commands.
Back-patch to 9.2. The hazard exists in all versions, but this patch
would need more work to apply before 9.2. Given the lack of field
complaints about this issue, it doesn't seem worth the effort at present.
Daniel Farina and Tom Lane
Normally each module is tested in a database named contrib_regression,
which is dropped and recreated at the beginhning of each pg_regress run.
This new mode, enabled by adding USE_MODULE_DB=1 to the make command
line, runs most modules in a database with the module name embedded in
it.
This will make testing pg_upgrade on clusters with the contrib modules
a lot easier.
Second attempt at this, this time accomodating make versions older
than 3.82.
Still to be done: adapt to the MSVC build system.
Backpatch to 9.0, which is the earliest version it is reasonably
possible to test upgrading from.
Normally each module is tested in aq database named contrib_regression,
which is dropped and recreated at the beginhning of each pg_regress run.
This mode, enabled by adding USE_MODULE_DB=1 to the make command line,
runs most modules in a database with the module name embedded in it.
This will make testing pg_upgrade on clusters with the contrib modules
a lot easier.
Still to be done: adapt to the MSVC build system.
Backpatch to 9.0, which is the earliest version it is reasonably possible
to test upgrading from.
The HINTs generated for these error cases vary across builds. We
could try to work around that, but the test cases aren't really useful
enough to justify taking any trouble.
Per buildfarm.
dblink now has its own validator function dblink_fdw_validator(), which is
better than the core function postgresql_fdw_validator() because it gets
the list of legal options from libpq instead of having a hard-wired list.
Make the dblink extension module provide a standard foreign data wrapper
dblink_fdw that encapsulates use of this validator, and recommend use of
that wrapper instead of making up wrappers on the fly.
Unfortunately, because ad-hoc wrappers *were* recommended practice
previously, it's not clear when we can get rid of postgresql_fdw_validator
without causing upgrade problems. But this is a step in the right
direction.
Shigeru Hanada, reviewed by KaiGai Kohei
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
After taking awhile to digest the row-processor feature that was added to
libpq in commit 92785dac2e, we've concluded
it is over-complicated and too hard to use. Leave the core infrastructure
changes in place (that is, there's still a row processor function inside
libpq), but remove the exposed API pieces, and instead provide a "single
row" mode switch that causes PQgetResult to return one row at a time in
separate PGresult objects.
This approach incurs more overhead than proper use of a row processor
callback would, since construction of a PGresult per row adds extra cycles.
However, it is far easier to use and harder to break. The single-row mode
still affords applications the primary benefit that the row processor API
was meant to provide, namely not having to accumulate large result sets in
memory before processing them. Preliminary testing suggests that we can
probably buy back most of the extra cycles by micro-optimizing construction
of the extra results, but that task will be left for another day.
Marko Kreen
This patch provides a test case for libpq's row processor API.
contrib/dblink can deal with very large result sets by dumping them into
a tuplestore (which can spill to disk) --- but until now, the intermediate
storage of the query result in a PGresult meant memory bloat for any large
result. Now we use a row processor to convert the data to tuple form and
dump it directly into the tuplestore.
A limitation is that this only works for plain dblink() queries, not
dblink_send_query() followed by dblink_get_result(). In the latter
case we don't know the desired tuple rowtype soon enough. While hack
solutions to that are possible, a different user-level API would
probably be a better answer.
Kyotaro Horiguchi, reviewed by Marko Kreen and Tom Lane
dblink_exec leaked temporary database connections if any error occurred
after connection setup, for example
SELECT dblink_exec('...connect string...', 'select 1/0');
Add a PG_TRY block to ensure PQfinish gets done when it is needed.
(dblink_record_internal is on the hairy edge of needing similar treatment,
but seems not to be actively broken at the moment.)
Also, in 9.0 and up, only one of the three functions using tuplestore
return mode was properly checking that the query context would allow
a tuplestore result.
Noted while reviewing dblink patch. Back-patch to all supported branches.
The DBLINK_GET_CONN and DBLINK_GET_NAMED_CONN macros did not set the
surrounding function's conname variable, causing errors to be incorrectly
reported as having occurred on the "unnamed" connection in some cases.
This bug was actually visible in two cases in the regression tests,
but apparently whoever added those cases wasn't paying attention.
Noted by Kyotaro Horiguchi, though this is different from his proposed
patch.
Back-patch to 8.4; 8.3 does not have the same type of error reporting
so the patch is not relevant.
We have seen one too many reports of people trying to use 9.1 extension
files in the old-fashioned way of sourcing them in psql. Not only does
that usually not work (due to failure to substitute for MODULE_PATHNAME
and/or @extschema@), but if it did work they'd get a collection of loose
objects not an extension. To prevent this, insert an \echo ... \quit
line that prints a suitable error message into each extension script file,
and teach commands/extension.c to ignore lines starting with \echo.
That should not only prevent any adverse consequences of loading a script
file the wrong way, but make it crystal clear to users that they need to
do it differently now.
Tom Lane, following an idea of Andrew Dunstan's. Back-patch into 9.1
... there is not going to be much value in this if we wait till 9.2.
There may be some other places where we should use errdetail_internal,
but they'll have to be evaluated case-by-case. This commit just hits
a bunch of places where invoking gettext is obviously a waste of cycles.
Added a new option --extra-install to pg_regress to arrange installing
the respective contrib directory into the temporary installation.
This is currently not yet supported for Windows MSVC builds.
Updated the .gitignore files for contrib modules to ignore the
leftovers of a temp-install check run.
Changed the exit status of "make check" in a pgxs build (which still
does nothing) to 0 from 1.
Added "make check" in contrib to top-level "make check-world".
It was never terribly consistent to use OR REPLACE (because of the lack of
comparable functionality for data types, operators, etc), and
experimentation shows that it's now positively pernicious in the extension
world. We really want a failure to occur if there are any conflicts, else
it's unclear what the extension-ownership state of the conflicted object
ought to be. Most of the time, CREATE EXTENSION will fail anyway because
of conflicts on other object types, but an extension defining only
functions can succeed, with bad results.
This isn't fully tested as yet, in particular I'm not sure that the
"foo--unpackaged--1.0.sql" scripts are OK. But it's time to get some
buildfarm cycles on it.
sepgsql is not converted to an extension, mainly because it seems to
require a very nonstandard installation process.
Dimitri Fontaine and Tom Lane
This eliminates the need for inefficient implementions of this
functionality in both contrib/dblink and contrib/tablefunc, so remove
them. The upcoming patch implementing an in-core format() function
will also require this functionality.
In passing, add some regression tests.
Replace for loops in makefiles with proper dependencies. Parallel
make can now span across directories. Also, make -k and make -q work
properly.
GNU make 3.80 or newer is now required.
dblink_build_sql_insert() and related functions. Now the column numbers
are treated as logical not physical column numbers. This will provide saner
behavior in the presence of dropped columns; furthermore, if we ever get
around to allowing rearrangement of logical column ordering, the original
definition would become nearly untenable from a usability standpoint.
Per recent discussion of dblink's handling of dropped columns.
Not back-patched for fear of breaking existing applications.
columns correctly. In passing, get rid of some dead logic in the
underlying get_sql_insert() etc functions --- there is no caller that
will pass null value-arrays to them.
Per bug report from Robert Voinea.
dblink_build_sql_insert() and related functions. In particular, be sure to
reject references to dropped and out-of-range column numbers. The numbers
are still interpreted as physical column numbers, though, for backward
compatibility.
This patch replaces Joe's patch of 2010-02-03, which handled only some aspects
of the problem.
lock the target relation just once per SQL function call. The original coding
obtained and released lock several times per call. Aside from saving a
not-insignificant number of cycles, this eliminates possible race conditions
if someone tries to modify the relation's schema concurrently. Also
centralize locking and permission-checking logic.
Problem noted while investigating a trouble report from Robert Voinea --- his
problem is still to be fixed, though.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
