Standardize on xoroshiro128** as our basic PRNG algorithm, eliminating
a bunch of platform dependencies as well as fundamentally-obsolete PRNG
code. In addition, this API replacement will ease replacing the
algorithm again in future, should that become necessary.
xoroshiro128** is a few percent slower than the drand48 family,
but it can produce full-width 64-bit random values not only 48-bit,
and it should be much more trustworthy. It's likely to be noticeably
faster than the platform's random(), depending on which platform you
are thinking about; and we can have non-global state vectors easily,
unlike with random(). It is not cryptographically strong, but neither
are the functions it replaces.
Fabien Coelho, reviewed by Dean Rasheed, Aleksander Alekseev, and myself
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2105241211230.165418@pseudo
Expand the checks of toasted attributes to complain if the rawsize is
overlarge. For compressed attributes, also complain if compression
appears to have expanded the attribute or if the compression method is
invalid.
Mark Dilger, reviewed by Justin Pryzby, Alexander Alekseev, Heikki
Linnakangas, Greg Stark, and me.
Discussion: http://postgr.es/m/8E42250D-586A-4A27-B317-8B062C3816A8@enterprisedb.com
Commits fdd965d07 and 3cd9c3b92 tested CREATE INDEX CONCURRENTLY by
launching two separate pgbench runs concurrently. This was needed so
that only a single client thread would run CREATE INDEX CONCURRENTLY,
avoiding deadlock between two CICs. However, there's a better way,
which is to use an advisory lock to prevent concurrent CICs. That's
better in part because the test code is shorter and more readable, but
mostly because it automatically scales things to launch an appropriate
number of CICs relative to the number of INSERT transactions.
As committed, typically half to three-quarters of the CIC transactions
were pointless because the INSERT transactions had already stopped.
In passing, remove background_pgbench, which was added to support
these tests and isn't needed anymore. We can always put it back
if we find a use for it later.
Back-patch to v12; older pgbench versions lack the
conditional-execution features needed for this method.
Tom Lane and Andrey Borodin
Discussion: https://postgr.es/m/139687.1635277318@sss.pgh.pa.us
The five modules in our TAP test framework all had names in the top
level namespace. This is unwise because, even though we're not
exporting them to CPAN, the names can leak, for example if they are
exported by the RPM build process. We therefore move the modules to the
PostgreSQL::Test namespace. In the process PostgresNode is renamed to
Cluster, and TestLib is renamed to Utils. PostgresVersion becomes simply
PostgreSQL::Version, to avoid possible confusion about what it's the
version of.
Discussion: https://postgr.es/m/aede93a4-7d92-ef26-398f-5094944c2504@dunslane.net
Reviewed by Erik Rijkers and Michael Paquier
The purpose of commit 8a54e12a38 was to
fix this, and it sufficed when the PREPARE TRANSACTION completed before
the CIC looked for lock conflicts. Otherwise, things still broke. As
before, in a cluster having used CIC while having enabled prepared
transactions, queries that use the resulting index can silently fail to
find rows. It may be necessary to reindex to recover from past
occurrences; REINDEX CONCURRENTLY suffices. Fix this for future index
builds by making CIC wait for arbitrarily-recent prepared transactions
and for ordinary transactions that may yet PREPARE TRANSACTION. As part
of that, have PREPARE TRANSACTION transfer locks to its dummy PGPROC
before it calls ProcArrayClearTransaction(). Back-patch to 9.6 (all
supported versions).
Andrey Borodin, reviewed (in earlier versions) by Andres Freund.
Discussion: https://postgr.es/m/01824242-AA92-4FE9-9BA7-AEBAFFEA3D0C@yandex-team.ru
CIC and REINDEX CONCURRENTLY assume backends see their catalog changes
no later than each backend's next transaction start. That failed to
hold when a backend absorbed a relevant invalidation in the middle of
running RelationBuildDesc() on the CIC index. Queries that use the
resulting index can silently fail to find rows. Fix this for future
index builds by making RelationBuildDesc() loop until it finishes
without accepting a relevant invalidation. It may be necessary to
reindex to recover from past occurrences; REINDEX CONCURRENTLY suffices.
Back-patch to 9.6 (all supported versions).
Noah Misch and Andrey Borodin, reviewed (in earlier versions) by Andres
Freund.
Discussion: https://postgr.es/m/20210730022548.GA1940096@gust.leadboat.com
Incrementing the level of the call stack reported is useful for
debugging purposes as it allows to control which part of the test is
exactly failing, especially if a test is structured with subroutines
that call routines from Test::More.
This adds more incrementations of $Test::Builder::Level where debugging
gets improved (for example it does not make sense for some paths like
pg_rewind where long subroutines are used).
A note is added to src/test/perl/README about that, based on a
suggestion from Andrew Dunstan and a wording coming from both of us.
Usage of Test::Builder::Level has spread in 12, so a backpatch down to
this version is done.
Reviewed-by: Andrew Dunstan, Peter Eisentraut, Daniel Gustafsson
Discussion: https://postgr.es/m/YV1CCFwgM1RV1LeS@paquier.xyz
Backpatch-through: 12
Have verify_heapam.c treat unlogged relations as if they were simply
empty when in Hot Standby mode. This brings it in line with
verify_nbtree.c, which has handled unlogged relations in the same way
since bugfix commit 6754fe65a4. This was an oversight in commit
866e24d47d, which extended contrib/amcheck to check heap relations.
In passing, lower the verbosity used when reporting that a relation has
been skipped like this, from NOTICE to DEBUG1. This is appropriate
because the skipping behavior is only an implementation detail, needed
to work around the fact that unlogged tables don't have smgr-level
storage for their main fork when in Hot Standby mode.
Affected unlogged relations should be considered "trivially verified",
not skipped over. They are verified in the same sense that a totally
empty relation can be verified. This behavior seems least surprising
overall, since unlogged relations on a replica will initially be empty
if and when the replica is promoted and Hot Standby ends.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wzk_pukOFY7JmdiFLsrz+Pd3V8OwgC1TH2Vd5BH5ZgK4bA@mail.gmail.com
Backpatch: 14-, where heapam verification was introduced.
Sequences were left out of the list of relation kinds that
verify_heapam knew how to check, though it is fairly trivial to allow
them. Doing that, and while at it, updating pg_amcheck to include
sequences in relations matched by table and relation patterns.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/81ad4757-92c1-4aa3-7bee-f609544837e3%40enterprisedb.com
There is only one constructor now for PostgresNode, with the idiomatic
name 'new'. The method is not exported by the class, and must be called
as "PostgresNode->new('name',[args])". All the TAP tests that use
PostgresNode are modified accordingly. Third party scripts will need
adjusting, which is a fairly mechanical process (I just used a sed
script).
The idea behind this patch is to design out bugs like the one fixed
by commit 9d523119f. Previously, once one did RelationOpenSmgr(rel),
it was considered okay to access rel->rd_smgr directly for some
not-very-clear interval. But since that pointer will be cleared by
relcache flushes, we had bugs arising from overreliance on a previous
RelationOpenSmgr call still being effective.
Now, very little code except that in rel.h and relcache.c should ever
touch the rd_smgr field directly. The normal coding rule is to use
RelationGetSmgr(rel) and not expect the result to be valid for longer
than one smgr function call. There are a couple of places where using
the function every single time seemed like overkill, but they are now
annotated with large warning comments.
Amul Sul, after an idea of mine.
Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com
Most error messages about a relkind that was not supported or
appropriate for the command was of the pattern
"relation \"%s\" is not a table, foreign table, or materialized view"
This style can become verbose and tedious to maintain. Moreover, it's
not very helpful: If I'm trying to create a comment on a TOAST table,
which is not supported, then the information that I could have created
a comment on a materialized view is pointless.
Instead, write the primary error message shorter and saying more
directly that what was attempted is not possible. Then, in the detail
message, explain that the operation is not supported for the relkind
the object was. To simplify that, add a new function
errdetail_relkind_not_supported() that does this.
In passing, make use of RELKIND_HAS_STORAGE() where appropriate,
instead of listing out the relkinds individually.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/dc35a398-37d0-75ce-07ea-1dd71d98f8ec@2ndquadrant.com
Code comments were claiming that verify_heapam() was checking
privileges on the relation it was operating on, but it didn't actually
do that. Perhaps earlier versions of the patch did that, but now the
access is regulated by privileges on the function. Remove the wrong
comments.
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
This isn't strictly necessary, but in theory it might matter if in the
future the width of the nbtree special area changes -- its total size
might not be an even number of MAXALIGN() quantums, even with padding.
PageInit() MAXALIGN()s all special area offsets, but amcheck uses the
offset to perform initial basic validation of line pointers, so we don't
rely on the offset from the page header.
The real reason to do this is to set a good example for new code that
adds amcheck coverage for other index AMs.
Reported-By: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CALj2ACUMqTR9nErh99FbOBmzCXE9=gXNqhBiwYOhejJJS1LXqQ@mail.gmail.com
A couple of tests have been using 0 as magic constant while SEEK_SET can
be used instead. This makes the code easier to understand, and more
consistent with the changes done in 3c5b068.
Per discussion with Andrew Dunstan.
Discussion: https://postgr.es/m/YHrc24AgJQ6tQ1q0@paquier.xyz
We don't need to mention the attribute number in these messages, because
there's a dedicated column for that, but we should mention the toast
value ID, because that's really useful for any follow-up troubleshooting
the user wants to do. This also rewords some of the messages to hopefully
read a little better.
Also, use VARATT_EXTERNAL_GET_POINTER in case we're accessing a TOAST
pointer that isn't aligned on a platform that's fussy about alignment,
so that we don't crash while corruption-checking the user's data.
Mark Dilger, reviewed by me.
Discussion: http://postgr.es/m/7D3B9BF6-50D0-4C30-8506-1C1851C7F96F@enterprisedb.com
First, don't perform database access while holding a buffer lock.
When checking a heap, we can validate that TOAST pointers are sane by
performing a scan on the TOAST index and looking up the chunks that
correspond to each value ID that appears in a TOAST poiner in the main
table. But, to do that while holding a buffer lock at least risks
causing other backends to wait uninterruptibly, and probably can cause
undetected and uninterruptible deadlocks. So, instead, make a list of
checks to perform while holding the lock, and then perform the checks
after releasing it.
Second, adjust things so that we don't try to follow TOAST pointers
for tuples that are already eligible to be pruned. The TOAST tuples
become eligible for pruning at the same time that the main tuple does,
so trying to check them may lead to spurious reports of corruption,
as observed in the buildfarm. The necessary infrastructure to decide
whether or not the tuple being checked is prunable was added by
commit 3b6c1259f9, but it wasn't
actually used for its intended purpose prior to this patch.
Mark Dilger, adjusted by me to avoid a memory leak.
Discussion: http://postgr.es/m/AC5479E4-6321-473D-AC92-5EC36299FBC2@enterprisedb.com
Commit 3b6c1259f9 resulted in the same
xmin and xmax bounds checking being performed in both check_tuple()
and check_tuple_visibility(). Remove the duplication.
While at it, adjust some code comments that were overlooked in that
commit.
Mark Dilger
Discussion: http://postgr.es/m/AC5479E4-6321-473D-AC92-5EC36299FBC2@enterprisedb.com
There is now a per-column COMPRESSION option which can be set to pglz
(the default, and the only option in up until now) or lz4. Or, if you
like, you can set the new default_toast_compression GUC to lz4, and
then that will be the default for new table columns for which no value
is specified. We don't have lz4 support in the PostgreSQL code, so
to use lz4 compression, PostgreSQL must be built --with-lz4.
In general, TOAST compression means compression of individual column
values, not the whole tuple, and those values can either be compressed
inline within the tuple or compressed and then stored externally in
the TOAST table, so those properties also apply to this feature.
Prior to this commit, a TOAST pointer has two unused bits as part of
the va_extsize field, and a compessed datum has two unused bits as
part of the va_rawsize field. These bits are unused because the length
of a varlena is limited to 1GB; we now use them to indicate the
compression type that was used. This means we only have bit space for
2 more built-in compresison types, but we could work around that
problem, if necessary, by introducing a new vartag_external value for
any further types we end up wanting to add. Hopefully, it won't be
too important to offer a wide selection of algorithms here, since
each one we add not only takes more coding but also adds a build
dependency for every packager. Nevertheless, it seems worth doing
at least this much, because LZ4 gets better compression than PGLZ
with less CPU usage.
It's possible for LZ4-compressed datums to leak into composite type
values stored on disk, just as it is for PGLZ. It's also possible for
LZ4-compressed attributes to be copied into a different table via SQL
commands such as CREATE TABLE AS or INSERT .. SELECT. It would be
expensive to force such values to be decompressed, so PostgreSQL has
never done so. For the same reasons, we also don't force recompression
of already-compressed values even if the target table prefers a
different compression method than was used for the source data. These
architectural decisions are perhaps arguable but revisiting them is
well beyond the scope of what seemed possible to do as part of this
project. However, it's relatively cheap to recompress as part of
VACUUM FULL or CLUSTER, so this commit adjusts those commands to do
so, if the configured compression method of the table happens not to
match what was used for some column value stored therein.
Dilip Kumar. The original patches on which this work was based were
written by Ildus Kurbangaliev, and those were patches were based on
even earlier work by Nikita Glukhov, but the design has since changed
very substantially, since allow a potentially large number of
compression methods that could be added and dropped on a running
system proved too problematic given some of the architectural issues
mentioned above; the choice of which specific compression method to
add first is now different; and a lot of the code has been heavily
refactored. More recently, Justin Przyby helped quite a bit with
testing and reviewing and this version also includes some code
contributions from him. Other design input and review from Tomas
Vondra, Álvaro Herrera, Andres Freund, Oleg Bartunov, Alexander
Korotkov, and me.
Discussion: http://postgr.es/m/20170907194236.4cefce96%40wp.localdomain
Discussion: http://postgr.es/m/CAFiTN-uUpX3ck%3DK0mLEk-G_kUQY%3DSNOTeqdaNRR9FMdQrHKebw%40mail.gmail.com
Empty sibling pages can occasionally be much more common than any other
event that we report on at elevel DEBUG1. Increase the elevel for
relevant cases to DEBUG2 to avoid overwhelming the user with relatively
insignificant details.
Don't complain about the last TOAST chunk number being different
from what we expected if there are no TOAST chunks at all.
In such a case, saying that the final chunk number is 0 is not
really accurate, and the fact the value is missing from the
TOAST table is reported separately anyway.
Mark Dilger
Discussion: http://postgr.es/m/AA5506CE-7D2A-42E4-A51D-358635E3722D@enterprisedb.com
Otherwise we risk "leaking" deleted pages by making them non-recyclable
indefinitely. Commit 6655a729 did the same thing for deleted pages in
GiST indexes. That work was used as a starting point here.
Stop storing an XID indicating the oldest bpto.xact across all deleted
though unrecycled pages in nbtree metapages. There is no longer any
reason to care about that condition/the oldest XID. It only ever made
sense when wraparound was something _bt_vacuum_needs_cleanup() had to
consider.
The btm_oldest_btpo_xact metapage field has been repurposed and renamed.
It is now btm_last_cleanup_num_delpages, which is used to remember how
many non-recycled deleted pages remain from the last VACUUM (in practice
its value is usually the precise number of pages that were _newly
deleted_ during the specific VACUUM operation that last set the field).
The general idea behind storing btm_last_cleanup_num_delpages is to use
it to give _some_ consideration to non-recycled deleted pages inside
_bt_vacuum_needs_cleanup() -- though never too much. We only really
need to avoid leaving a truly excessive number of deleted pages in an
unrecycled state forever. We only do this to cover certain narrow cases
where no other factor makes VACUUM do a full scan, and yet the index
continues to grow (and so actually misses out on recycling existing
deleted pages).
These metapage changes result in a clear user-visible benefit: We no
longer trigger full index scans during VACUUM operations solely due to
the presence of only 1 or 2 known deleted (though unrecycled) blocks
from a very large index. All that matters now is keeping the costs and
benefits in balance over time.
Fix an issue that has been around since commit 857f9c36, which added the
"skip full scan of index" mechanism (i.e. the _bt_vacuum_needs_cleanup()
logic). The accuracy of btm_last_cleanup_num_heap_tuples accidentally
hinged upon _when_ the source value gets stored. We now always store
btm_last_cleanup_num_heap_tuples in btvacuumcleanup(). This fixes the
issue because IndexVacuumInfo.num_heap_tuples (the source field) is
expected to accurately indicate the state of the table _after_ the
VACUUM completes inside btvacuumcleanup().
A backpatchable fix cannot easily be extracted from this commit. A
targeted fix for the issue will follow in a later commit, though that
won't happen today.
I (pgeoghegan) have chosen to remove any mention of deleted pages in the
documentation of the vacuum_cleanup_index_scale_factor GUC/param, since
the presence of deleted (though unrecycled) pages is no longer of much
concern to users. The vacuum_cleanup_index_scale_factor description in
the docs now seems rather unclear in any case, and it should probably be
rewritten in the near future. Perhaps some passing mention of page
deletion will be added back at the same time.
Bump XLOG_PAGE_MAGIC due to nbtree WAL records using full XIDs now.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznpdHvujGUwYZ8sihX=d5u-tRYhi-F4wnV2uN2zHpMUXw@mail.gmail.com
Commit 866e24d47d added an assert that HEAP_XMAX_LOCK_ONLY and
HEAP_KEYS_UPDATED cannot appear together, on the faulty assumption that
the latter necessarily referred to an update and not a tuple lock; but
that's wrong, because SELECT FOR UPDATE can use precisely that
combination, as evidenced by the amcheck test case added here.
Remove the Assert(), and also patch amcheck's verify_heapam.c to not
complain if the combination is found. Also, out of overabundance of
caution, update (across all branches) README.tuplock to be more explicit
about this.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Mahendra Singh Thalor <mahi6run@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/20210124061758.GA11756@nol
This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.
This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.
Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.
The first attempt of this patch (commit 3b733fcd04) caused the buildfarm
member "rorqual" (built with --disable-atomics --disable-spinlocks) to report
the failure of the regression test. It was reverted by commit 890d2182a2.
The cause of this failure was that the atomic variable for "waitstart"
in the dummy process entry created at the end of prepare transaction was
not initialized. This second attempt fixes that issue.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com
This commit adds new column "waitstart" into pg_locks view. This column
reports the time when the server process started waiting for the lock
if the lock is not held. This information is useful, for example, when
examining the amount of time to wait on a lock by subtracting
"waitstart" in pg_locks from the current time, and identify the lock
that the processes are waiting for very long.
This feature uses the current time obtained for the deadlock timeout
timer as "waitstart" (i.e., the time when this process started waiting
for the lock). Since getting the current time newly can cause overhead,
we reuse the already-obtained time to avoid that overhead.
Note that "waitstart" is updated without holding the lock table's
partition lock, to avoid the overhead by additional lock acquisition.
This can cause "waitstart" in pg_locks to become NULL for a very short
period of time after the wait started even though "granted" is false.
This is OK in practice because we can assume that users are likely to
look at "waitstart" when waiting for the lock for a long time.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Ian Lawrence Barwick, Robert Haas, Justin Pryzby, Fujii Masao
Discussion: https://postgr.es/m/a96013dc51cdc56b2a2b84fa8a16a993@oss.nttdata.com
By default VACUUM will skip pages that it can't immediately get
exclusive access to, which means that even activities as harmless
and unpredictable as checkpoint buffer writes might prevent a page
from being processed. Ordinarily this is no big deal, but we have
a small number of test cases that examine the results of VACUUM's
processing and therefore will fail if the page of interest is skipped.
This seems to be the explanation for some rare buildfarm failures.
To fix, add the DISABLE_PAGE_SKIPPING option to the VACUUM commands
in tests where this could be an issue.
In passing, remove a duplicated query in pageinspect/sql/page.sql.
Back-patch as necessary (some of these cases are as old as v10).
Discussion: https://postgr.es/m/413923.1611006484@sss.pgh.pa.us
verify_heapam() wasn't being careful to sanity-check tuple line
pointers before using them, resulting in SIGBUS on alignment-picky
architectures. Fix that, add some more test coverage.
Mark Dilger, some tweaking by me
Discussion: https://postgr.es/m/30B8E99A-2D9C-48D4-A55C-741C9D5F1563@enterprisedb.com
Commit d114cc53 overlooked the fact that pg_upgrade'd B-Tree indexes
have leaf page high keys whose offset numbers do not match the one from
the copy of the tuple one level up (the copy stored with a downlink for
leaf page's right sibling page). This led to false positive reports of
corruption from bt_index_parent_check() when it was called to verify a
pg_upgrade'd index.
To fix, skip comparing the offset number on pg_upgrade'd B-Tree indexes.
Author: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Andrew Bille <andrewbille@gmail.com>
Diagnosed-By: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Bug: #16619
Discussion: https://postgr.es/m/16619-aaba10f83fdc1c3c@postgresql.org
Backpatch: 13-, where child check was enhanced.
To make GetSnapshotData() more scalable, it cannot not look at at each proc's
xmin: While snapshot contents do not need to change whenever a read-only
transaction commits or a snapshot is released, a proc's xmin is modified in
those cases. The frequency of xmin modifications leads to, particularly on
higher core count systems, many cache misses inside GetSnapshotData(), despite
the data underlying a snapshot not changing. That is the most
significant source of GetSnapshotData() scaling poorly on larger systems.
Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons /
thresholds as it has so far. But we don't really have to: The horizons don't
actually change that much between GetSnapshotData() calls. Nor are the horizons
actually used every time a snapshot is built.
The trick this commit introduces is to delay computation of accurate horizons
until there use and using horizon boundaries to determine whether accurate
horizons need to be computed.
The use of RecentGlobal[Data]Xmin to decide whether a row version could be
removed has been replaces with new GlobalVisTest* functions. These use two
thresholds to determine whether a row can be pruned:
1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed
are definitely still visible.
2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can
definitely be removed
GetSnapshotData() updates definitely_needed to be the xmin of the computed
snapshot.
When testing whether a row can be removed (with GlobalVisTestIsRemovableXid())
and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID <
definitely_needed) the boundaries can be recomputed to be more accurate. As it
is not cheap to compute accurate boundaries, we limit the number of times that
happens in short succession. As the boundaries used by
GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by
GetSnapshotData()), it is likely that further test can benefit from an earlier
computation of accurate horizons.
To avoid regressing performance when old_snapshot_threshold is set (as that
requires an accurate horizon to be computed), heap_page_prune_opt() doesn't
unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the
computation of the limited horizon, and the triggering of errors (with
SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove
tuples.
This commit just removes the accesses to PGXACT->xmin from
GetSnapshotData(), but other members of PGXACT residing in the same
cache line are accessed. Therefore this in itself does not result in a
significant improvement. Subsequent commits will take advantage of the
fact that GetSnapshotData() now does not need to access xmins anymore.
Note: This contains a workaround in heap_page_prune_opt() to keep the
snapshot_too_old tests working. While that workaround is ugly, the tests
currently are not meaningful, and it seems best to address them separately.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
