The checkpointer shouldn't ignore its latch. Other backends may be
waiting for it to drain the request queue. Hopefully real systems don't
have a full queue often, but the condition is reached easily when
shared_buffers is small.
This involves defining a new wait event, which will appear in the
pg_stat_activity view often due to spread checkpoints.
Back-patch only to 14. Even though the problem exists in earlier
branches too, it's hard to hit there. In 14 we stopped using signal
handlers for latches on Linux, *BSD and macOS, which were previously
hiding this problem by interrupting the sleep (though not reliably, as
the signal could arrive before the sleep begins; precisely the problem
latches address).
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220226213942.nb7uvb2pamyu26dj%40alap3.anarazel.de
As a demonstration of the sort of thing that can be done by adding a
custom backup target, this defines a 'shell' target which executes a
command defined by the system administrator. The command is executed
once for each tar archive generate by the backup and once for the
backup manifest, if any. Each time the command is executed, it
receives the contents of th file for which it is executed via standard
input.
The configured command can use %f to refer to the name of the archive
(e.g. base.tar, $TABLESPACE_OID.tar, backup_manifest) and %d to refer
to the target detail (pg_basebackup --target shell:DETAIL). A target
detail is required if %d appears in the configured command and
forbidden if it does not.
Patch by me, reviewed by Abhijit Menon-Sen.
Discussion: http://postgr.es/m/CA+TgmoaqvdT-u3nt+_kkZ7bgDAyqDB0i-+XOMmr5JN2Rd37hxw@mail.gmail.com
Commit 3500ccc39b allowed for base backup
targets, meaning that we could do something with the backup other than
send it to the client, but all of those targets had to be baked in to
the core code. This commit makes it possible for extensions to define
additional backup targets.
Patch by me, reviewed by Abhijit Menon-Sen.
Discussion: http://postgr.es/m/CA+TgmoaqvdT-u3nt+_kkZ7bgDAyqDB0i-+XOMmr5JN2Rd37hxw@mail.gmail.com
These tests were added recently, but older code tests USE_LZ4 rathr
than HAVE_LIBLZ4, so let's follow the established precedent. It
also seems more consistent with the intent of the configure tests,
since I think that the USE_* symbols are intended to correspond to
what the user requested, and the HAVE_* symbols to what configure
found while probing.
Discussion: http://postgr.es/m/CA+Tgmoap+hTD2-QNPJLH4tffeFE8MX5+xkbFKMU3FKBy=ZSNKA@mail.gmail.com
This system function was being triggered once in the main regression
test suite to check its SRF configuration, and more in other test
modules but nothing checked the behavior of the options missing_ok and
include_dot_dirs. This commit adds some tests for both options, to
avoid mistakes if this code is manipulated in the future.
Extracted from a larger patch by the same author, with a few tweaks by
me.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20191227170220.GE12890@telsasoft.com
Previously, pg_basebackup from a cluster that contained an 'in-place'
tablespace, as introduced by commit 7170f215, would produce a harmless
warning on Unix and fail completely on Windows.
Reported-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20220304.165449.1200020258723305904.horikyota.ntt%40gmail.com
The upper case versions "OF", "TZH", and "TZM" are already supported,
and all other format codes that are supported in upper case are also
supported in lower case, so we should support these as well for
consistency.
Nitin Jadhav, with a tiny cosmetic change by me. Reviewed by Suraj
Kharage and David Zhang.
Discussion: http://postgr.es/m/CAMm1aWZ-oZyKd75+8D=VJ0sAoSwtdXWLP-MAWD4D8R1Dgandzw@mail.gmail.com
Logical replication apply workers for a subscription can easily get stuck
in an infinite loop of attempting to apply a change, triggering an error
(such as a constraint violation), exiting with the error written to the
subscription server log, and restarting.
To partially remedy the situation, this patch adds a new subscription
option named 'disable_on_error'. To be consistent with old behavior, this
option defaults to false. When true, both the tablesync worker and apply
worker catch any errors thrown and disable the subscription in order to
break the loop. The error is still also written in the logs.
Once the subscription is disabled, users can either manually resolve the
conflict/error or skip the conflicting transaction by using
pg_replication_origin_advance() function. After resolving the conflict,
users need to enable the subscription to allow apply process to proceed.
Author: Osumi Takamichi and Mark Dilger
Reviewed-by: Greg Nancarrow, Vignesh C, Amit Kapila, Wang wei, Tang Haiying, Peter Smith, Masahiko Sawada, Shi Yu
Discussion : https://postgr.es/m/DB35438F-9356-4841-89A0-412709EBD3AB%40enterprisedb.com
Commit 872770fd6c taught VACUUM VERBOSE and autovacuum logging to
display the total number of pages scanned by VACUUM. This information
was also displayed as a percentage of rel_pages in parenthesis, which
makes it easy to spot trends over time and across tables.
The instrumentation displayed "0 scanned (0.00% of total)" for totally
empty tables. Tweak the instrumentation: have it show "0 scanned
(100.00% of total)" for empty tables instead. This approach is clearer
and more consistent.
Starting in cc50080a82 create_index test fails when run with
synchronous_commit=off. synchronous_commit=off delays when hint bits may be
set. Some plans change depending on the number of all-visible pages, which in
turn can be influenced by the delayed hint bits.
Force synchronous_commit to `on` in test_setup.sql. Not very satisfying, but
there's no obvious alternative.
Reported-By: Aleksander Alekseev <aleksander@timescale.com>
Author: Andres Freund <andres@anarazel.de>
Author: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/CAJ7c6TPJNof1Q+vJsy3QebgbPgXdu2ErPvYkBdhD6_Ckv5EZRg@mail.gmail.com
VACUUM's rel_pages field indicates the size of the target heap rel just
after the table_relation_vacuum() operation began. There are specific
expectations around how rel_pages can be related to other nearby state.
In particular, the range of rel_pages must contain every tuple in the
relation whose tuple headers might contain an XID < OldestXmin.
Consistently refer to the field as rel_pages to make this clearer and
more discoverable.
This is follow-up work to commit 73f6ec3d from earlier today.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220311031351.sbge5m2bpvy2ttxg@alap3.anarazel.de
Explain the relationship between vacuumlazy.c's vistest and OldestXmin
cutoffs. These closely related cutoffs are different in subtle but
important ways. Also document a closely related rule: we must establish
rel_pages _after_ OldestXmin to ensure that no XID < OldestXmin can be
missed by lazy_scan_heap().
It's easier to explain these issues by initializing everything together,
so consolidate initialization of vacrel state. Now almost every vacrel
field is initialized by heap_vacuum_rel(). The only remaining exception
is the dead_items array, which is still managed by lazy_scan_heap() due
to interactions with how we initialize parallel VACUUM.
Also move the process that updates pg_class entries for each index into
heap_vacuum_rel(), and adjust related assertions. All pg_class updates
now take place after lazy_scan_heap() returns, which seems clearer.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20211211045710.ljtuu4gfloh754rs@alap3.anarazel.de
Discussion: https://postgr.es/m/CAH2-WznYsUxVT156rCQ+q=YD4S4=1M37hWvvHLz-H1pwSM8-Ew@mail.gmail.com
We called the argument totally_frozen in its function prototype as well
as in code comments, even though totally_frozen_p was used in the
function definition. Standardize on totally_frozen.
Commit 8b069ef5d changed this function to look at pg_constraint.conindid
rather than searching pg_depend. That was a good performance improvement,
but it failed to preserve the exact semantics. The old code would only
return an index that was "owned by" (internally dependent on) the
specified constraint, whereas the new code will also return indexes that
are just referenced by foreign key constraints. This confuses ALTER
TABLE, which was implicitly expecting the previous semantics, into
failing with errors like
ERROR: relation 146621 has multiple clustered indexes
or
ERROR: "pk_attbl" is not an index for table "atref"
We can fix this without reverting the performance improvement by adding
a contype check in get_constraint_index(). Another way could be to
make ALTER TABLE check it, but I'm worried that extension code could
also have subtle dependencies on the old semantics.
Tom Lane and Japin Li, per bug #17409 from Holly Roberts.
Back-patch to v14 where the error crept in.
Discussion: https://postgr.es/m/17409-52871dda8b5741cb@postgresql.org
Fail with a suitable error message instead. We can't inject the backup
manifest into the output tarfile without decompressing it, and if
we did that, we'd have to recompress the tarfile afterwards to produce
the result the user is expecting. While we have enough infrastructure
in pg_basebackup now to accomplish that whole series of steps without
much additional code, it seems like excessively surprising behavior.
The user probably did not select server-side compression with the idea
that the client was going to end up decompressing it and then
recompressing.
Report from Justin Pryzby. Fix by me.
Discussion: http://postgr.es/m/CA+Tgmob6Rnjz-Qv32h3yJn8nnUkLhrtQDAS4y5AtsgtorAFHRA@mail.gmail.com
"Hot Standby" was capitalized in a couple of places in the docs, as the
style primarily used when it was introduced, but this has not been much
respected across the years. Per discussion, it is more natural for the
reader to use "hot standby" (aka lower-case only) when in the middle of
a sentence, and "Hot standby" (aka capitalized) in a title. This commit
adjusts all the places in the docs to be consistent with this choice,
rather than applying one style or the other midway.
Author: Daniel Westermann
Reviewed-by: Kyotaro Horiguchi, Aleksander Alekseev, Robert Treat
Discussion: https://postgr.es/m/GVAP278MB093160025A779A1A5788D0EAD2039@GVAP278MB0931.CHEP278.PROD.OUTLOOK.COM
wal_compression gains a new value, "zstd", to allow the compression of
full-page images using the compression method of the same name.
Compression is done using the default level recommended by the library,
as of ZSTD_CLEVEL_DEFAULT = 3. Some benchmarking has shown that it
could make sense to use a level lower for the FPI compression, like 1 or
2, as the compression rate did not change much with a bit less CPU
consumed, but any tests done would only cover few scenarios so it is
hard to come to a clear conclusion. Anyway, there is no reason to not
use the default level instead, which is the level recommended by the
library so it should be fine for most cases.
zstd outclasses easily pglz, and is better than LZ4 where one wants to
have more compression at the cost of extra CPU but both are good enough
in their own scenarios, so the choice between one or the other of these
comes to a study of the workload patterns and the schema involved,
mainly.
This commit relies heavily on 4035cd5, that reshaped the code creating
and restoring full-page writes to be aware of the compression type,
making this integration straight-forward.
This patch borrows some early work from Andrey Borodin, though the patch
got a complete rewrite.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220222231948.GJ9008@telsasoft.com
Per project policy, all system and library headers need to be declared
in the backend code after "postgres.h" and before the internal headers,
but 4035cd5 broke this policy when adding support for LZ4 in
wal_compression.
Noticed while reviewing the patch to add support for zstd in this area.
This only impacts HEAD, so there is no need for a back-patch.
Add ability to scan all entries sequentially to dshash. The interface is
similar but a bit different both from that of dynahash and simple dshash
search functions. The most significant differences is that dshash's interfac
always needs a call to dshash_seq_term when scan ends. Another is
locking. Dshash holds partition lock when returning an entry,
dshash_seq_next() also holds lock when returning an entry but callers
shouldn't release it, since the lock is essential to continue a scan. The
seqscan interface allows entry deletion while a scan is in progress using
dshash_delete_current().
Reviewed-By: Andres Freund <andres@anarazel.de>
Author: Kyotaro Horiguchi <horikyoga.ntt@gmail.com>
Apparently, the previous update
(2e0e066679) must have used a stale
input file and missed a few additions that were added shortly before
the CLDR release. Update this now so that the next update really only
changes things new in that version.
ALTER ROUTINE triggers the events ddl_command_start and ddl_command_end,
and DROP ROUTINE triggers sql_drop, ddl_command_start and
ddl_command_end, but this was not mention on the matrix table.
Reported-by: Leslie Lemaire
Discussion: https://postgr.es/m/164647533363.646.5802968483136493025@wrigleys.postgresql.org
Backpatch-through: 11
Some of the test_decoding regression tests are unstable due to modifying
a sequence. The first increment of a sequence after a checkpoint is
always logged (and thus decoded), which makes the output unpredictable.
The runs are usually much shorter than a checkpoint internal, so these
failures are rare, but we've seen a couple of them on animals that are
either slow or are running with valgrind/clobber cache/...
Fixed by skipping sequence decoding in most tests, with the exception of
the test aimed at testing decoding of sequences.
Reported-by: Amita Kapila
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Both client-side compression and server-side compression are now
supported for zstd. In addition, a backup compressed by the server
using zstd can now be decompressed by the client in order to
accommodate the use of -Fp.
Jeevan Ladhe, with some edits by me.
Discussion: http://postgr.es/m/CA+Tgmobyzfbz=gyze2_LL1ZumZunmaEKbHQxjrFkOR7APZGu-g@mail.gmail.com
This commits adds both the finish LSN (commit_lsn in case transaction got
committed, prepare_lsn in case of a prepared transaction, etc.) and
replication origin name to the existing error context message.
This will help users in specifying the origin name and transaction finish
LSN to pg_replication_origin_advance() SQL function to skip a particular
transaction.
Author: Masahiko Sawada
Reviewed-by: Takamichi Osumi, Euler Taveira, and Amit Kapila
Discussion: https://postgr.es/m/CAD21AoBarBf2oTF71ig2g_o=3Z_Dt6_sOpMQma1kFgbnA5OZ_w@mail.gmail.com
Since 19252e8ec9 we reject Python 2 during build configuration. Now that the
dust on the buildfarm has settled, remove Python 2 specific code, including
the "Python 2/3 porting layer".
The code to detect conflicts between plpython using Python 2 and 3 is not
removed, in case somebody creates an out-of-tree version adding back support
for Python 2.
Reviewed-By: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20211031184548.g4sxfe47n2kyi55r@alap3.anarazel.de
Since 19252e8ec9 we reject Python 2 during build configuration. Now that the
dust on the buildfarm has settled, remove regression testing infrastructure
dealing with differing output between Python 2 / 3.
Reviewed-By: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20211031184548.g4sxfe47n2kyi55r@alap3.anarazel.de
Since 19252e8ec9 we reject Python 2 during build configuration. Now that the
dust on the buildfarm has settled, remove extension variants specific to
Python 2.
Reviewed-By: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20211031184548.g4sxfe47n2kyi55r@alap3.anarazel.de
9e98583 introduced a helper to centralize building their needed state
(tuplestore, tuple descriptors, etc.), checking for any errors. This
commit updates all places of contrib/ that can be switched to use
SetSingleFuncCall() as a drop-in replacement, resulting in the removal
of a lot of boilerplate code in all the modules updated by this commit.
Per analysis, some places remain as they are:
- pg_logdir_ls() in adminpack/ uses historically TYPEFUNC_RECORD as
return type, and I suspect that changing it may cause issues at run-time
with some of its past versions, down to 1.0.
- dblink/ uses a wrapper function doing exactly the work of
SetSingleFuncCall(). Here the switch should be possible, but rather
invasive so it does not seem the extra backpatch maintenance cost.
- tablefunc/, similarly, uses multiple helper functions with portions of
SetSingleFuncCall() spread across the code paths of this module.
Author: Melanie Plageman
Discussion: https://postgr.es/m/CAAKRu_bvDPJoL9mH6eYwvBpPtTGQwbDzfJbCM-OjkSZDu5yTPg@mail.gmail.com
