Commit a16bac36ec let "configure" detect
the system getaddrinfo() when building under 64-bit MinGW-w64. However,
src/include/port/win32/sys/socket.h assumes all native Windows
configurations use our replacement. This change placates buildfarm
member jacana until we establish a plan for getaddrinfo() on Windows.
We have had INT64_FORMAT and UINT64_FORMAT for a long time, but that's not
good enough if you want something more exotic, like "%20lld".
Abhijit Menon-Sen, per Andres Freund's suggestion.
This refactoring is in preparation for adding support for other SSL
implementations, with no user-visible effects. There are now two #defines,
USE_OPENSSL which is defined when building with OpenSSL, and USE_SSL which
is defined when building with any SSL implementation. Currently, OpenSSL is
the only implementation so the two #defines go together, but USE_SSL is
supposed to be used for implementation-independent code.
The libpq SSL code is changed to use a custom BIO, which does all the raw
I/O, like we've been doing in the backend for a long time. That makes it
possible to use MSG_NOSIGNAL to block SIGPIPE when using SSL, which avoids
a couple of syscall for each send(). Probably doesn't make much performance
difference in practice - the SSL encryption is expensive enough to mask the
effect - but it was a natural result of this refactoring.
Based on a patch by Martijn van Oosterhout from 2006. Briefly reviewed by
Alvaro Herrera, Andreas Karlsson, Jeff Janes.
With OpenLDAP versions 2.4.24 through 2.4.31, inclusive, PostgreSQL
backends can crash at exit. Raise a warning during "configure" based on
the compile-time OpenLDAP version number, and test the crash scenario in
the dblink test suite. Back-patch to 9.0 (all supported versions).
Apparently we still build against OpenSSL so old that it doesn't
have this function, so add an autoconf check for it to make the
buildfarm happy. If the function doesn't exist, always return
that compression is disabled, since presumably the actual
compression functionality is always missing.
For now, hardcode the function as present on MSVC, since we should
hopefully be well beyond those old versions on that platform.
ws2_32 is the new version of the library that should be used, as
it contains the require functionality from wsock32 as well as some
more (which is why some binaries were already using ws2_32).
Michael Paquier, reviewed by MauMau
Almost ten years ago, commit e48322a6d6 broke
the logic in ACX_PTHREAD by looping through all the possible flags rather
than stopping with the first one that would work. This meant that
$acx_pthread_ok was no longer meaningful after the loop; it would usually
be "no", whether or not we'd found working thread flags. The reason nobody
noticed is that Postgres doesn't actually use any of the symbols set up
by the code after the loop. Rather than complicate things some more to
make it work as designed, let's just remove all that dead code, and thereby
save a few cycles in each configure run.
Support for running postgres on Alpha hasn't been tested for a long
while. Due to Alpha's uniquely lax cache coherency model it's a hard
to develop for platform (especially blindly!) and thought to be
unlikely to currently work correctly.
As Alpha is the only supported architecture for Tru64 drop support for
it as well. Tru64's support has ended 2012 and it has been in
maintenance-only mode for much longer.
Also remove stray references to __ksr__ and ultrix defines.
This function is pervasive on free software operating systems; import
NetBSD's implementation. Back-patch to 8.4, like the commit that will
harness it.
Allow the contrib/uuid-ossp extension to be built atop any one of these
three popular UUID libraries. (The extension's name is now arguably a
misnomer, but we'll keep it the same so as not to cause unnecessary
compatibility issues for users.)
We would not normally consider a change like this post-beta1, but the issue
has been forced by our upgrade to autoconf 2.69, whose more rigorous header
checks are causing OSSP's header files to be rejected on some platforms.
It's been foreseen for some time that we'd have to move away from depending
on OSSP UUID due to lack of upstream maintenance, so this is a down payment
on that problem.
While at it, add some simple regression tests, in hopes of catching any
major incompatibilities between the three implementations.
Matteo Beccati, with some further hacking by me
It's easy to forget using SYSTEMQUOTEs when constructing command strings
for system() or popen(). Even if we fix all the places missing it now, it is
bound to be forgotten again in the future. Introduce wrapper functions that
do the the extra quoting for you, and get rid of SYSTEMQUOTEs in all the
callers.
We previosly used SYSTEMQUOTEs in all the hard-coded command strings, and
this doesn't change the behavior of those. But user-supplied commands, like
archive_command, restore_command, COPY TO/FROM PROGRAM calls, as well as
pgbench's \shell, will now gain an extra pair of quotes. That is desirable,
but if you have existing scripts or config files that include an extra
pair of quotes, those might need to be adjusted.
Reviewed by Amit Kapila and Tom Lane
The comment added by ed011d9754 used #,
which means it gets copied into configure, but it doesn't make sense
there. So use dnl, which gets dropped when creating configure.
Since C99, it's been standard for printf and friends to accept a "z" size
modifier, meaning "whatever size size_t has". Up to now we've generally
dealt with printing size_t values by explicitly casting them to unsigned
long and using the "l" modifier; but this is really the wrong thing on
platforms where pointers are wider than longs (such as Win64). So let's
start using "z" instead. To ensure we can do that on all platforms, teach
src/port/snprintf.c to understand "z", and add a configure test to force
use of that implementation when the platform's version doesn't handle "z".
Having done that, modify a bunch of places that were using the
unsigned-long hack to use "z" instead. This patch doesn't pretend to have
gotten everyplace that could benefit, but it catches many of them. I made
an effort in particular to ensure that all uses of the same error message
text were updated together, so as not to increase the number of
translatable strings.
It's possible that this change will result in format-string warnings from
pre-C99 compilers. We might have to reconsider if there are any popular
compilers that will warn about this; but let's start by seeing what the
buildfarm thinks.
Andres Freund, with a little additional work by me
krb5 has been deprecated since 8.3, and the recommended way to do
Kerberos authentication is using the GSSAPI authentication method
(which is still fully supported).
libpq retains the ability to identify krb5 authentication, but only
gives an error message about it being unsupported. Since all authentication
is initiated from the backend, there is no need to keep it at all
in the backend.
Defining this symbol causes OS X 10.5 to use a buggy version of readdir(),
which can sometimes fail with EINVAL if the previously-fetched directory
entry has been deleted or renamed. In later OS X versions that bug has
been repaired, but we still don't need the #define because it's on by
default. So this is just an all-around bad idea, and we can do without it.
This can be used to mark custom built binaries with an extra version
string such as a git describe identifier or distribution package release
version.
From: Oskari Saarenmaa <os@ohmu.fi>
Remove the use of the following macros, which are obsolescent according
to the Autoconf documentation:
- AC_C_CONST
- AC_C_STRINGIZE
- AC_C_VOLATILE
- AC_FUNC_MEMCMP
asprintf(), aside from not being particularly portable, has a fundamentally
badly-designed API; the psprintf() function that was added in passing in
the previous patch has a much better API choice. Moreover, the NetBSD
implementation that was borrowed for the previous patch doesn't work with
non-C99-compliant vsnprintf, which is something we still have to cope with
on some platforms; and it depends on va_copy which isn't all that portable
either. Get rid of that code in favor of an implementation similar to what
we've used for many years in stringinfo.c. Also, move it into libpgcommon
since it's not really libpgport material.
I think this patch will be enough to turn the buildfarm green again, but
there's still cosmetic work left to do, namely get rid of pg_asprintf()
in favor of using psprintf(). That will come in a followon patch.
Development of IRIX has been discontinued, and support is scheduled
to end in December of 2013. Therefore, there will be no supported
versions of this operating system by the time PostgreSQL 9.4 is
released. Furthermore, we have no maintainer for this platform.
Add asprintf(), pg_asprintf(), and psprintf() to simplify string
allocation and composition. Replacement implementations taken from
NetBSD.
Reviewed-by: Álvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Asif Naeem <anaeem.it@gmail.com>
This reverts commit 269e780822
and commit 5b571bb8c8.
Unfortunately, the initial patch had insufficient performance testing,
and resulted in a regression.
Per report by Thom Brown.
The configure script's test for <sys/ucred.h> did not work on OpenBSD,
because on that platform <sys/param.h> has to be included first.
As a result, socket peer authentication was disabled on that platform.
Problem introduced in commit be4585b1c2.
Andres Freund, slightly simplified by me.
This function is more efficient than actually writing out zeroes to
the new file, per microbenchmarks by Jon Nelson. Also, it may reduce
the likelihood of WAL file fragmentation.
Jon Nelson, with review by Andres Freund, Greg Smith and me.
This is just neatnik-ism, since all the tests in the code are #ifdefs,
but we shouldn't specify symbols as "Define to 1 ..." and then not
actually define them that way.
The main change here is to call security_compute_create_name_raw()
rather than security_compute_create_raw(). This ups the minimum
requirement for libselinux from 2.0.99 to 2.1.10, but it looks
like most distributions will have picked that up before 9.3 is out.
KaiGai Kohei
In commit 71450d7fd6, we added code to inform
suitably-intelligent compilers that ereport() doesn't return if the elevel
is ERROR or higher. This patch extends that to elog(), and also fixes a
double-evaluation hazard that the previous commit created in ereport(),
as well as reducing the emitted code size.
The elog() improvement requires the compiler to support __VA_ARGS__, which
should be available in just about anything nowadays since it's required by
C99. But our minimum language baseline is still C89, so add a configure
test for that.
The previous commit assumed that ereport's elevel could be evaluated twice,
which isn't terribly safe --- there are already counterexamples in xlog.c.
On compilers that have __builtin_constant_p, we can use that to protect the
second test, since there's no possible optimization gain if the compiler
doesn't know the value of elevel. Otherwise, use a local variable inside
the macros to prevent double evaluation. The local-variable solution is
inferior because (a) it leads to useless code being emitted when elevel
isn't constant, and (b) it increases the optimization level needed for the
compiler to recognize that subsequent code is unreachable. But it seems
better than not teaching non-gcc compilers about unreachability at all.
Lastly, if the compiler has __builtin_unreachable(), we can use that
instead of abort(), resulting in a noticeable code savings since no
function call is actually emitted. However, it seems wise to do this only
in non-assert builds. In an assert build, continue to use abort(), so that
the behavior will be predictable and debuggable if the "impossible"
happens.
These changes involve making the ereport and elog macros emit do-while
statement blocks not just expressions, which forces small changes in
a few call sites.
Andres Freund, Tom Lane, Heikki Linnakangas
I notice that plperl's makefile adds the -I for $perl_archlibexp/CORE
at the end of CPPFLAGS not the beginning. It seems somewhat unlikely
that the include search order has anything to do with why buildfarm
member okapi is failing, but I'm about out of other ideas.
It appears that perl_embed_ldflags should already mention all the libraries
that are required by libperl.so itself. So let's try the test link with
just those and not the other LIBS we've found up to now. This should
more nearly reproduce what will happen when plperl is linked, and perhaps
will fix buildfarm member okapi's problem.
Although most platforms seem to package Perl in such a way that these files
are present even in basic Perl installations, Debian does not. Hence, make
an effort to fail during configure rather than build if --with-perl was
given and these files are lacking. Per gripe from Josh Berkus.
Some versions of libedit expose bogus definitions of setproctitle(),
optreset, and perhaps other symbols that we don't want configure to pick up
on. There was a previous report of similar problems with strlcpy(), which
we addressed in commit 59cf88da91, but the
problem has evidently grown in scope since then. In hopes of not having to
deal with it again in future, rearrange configure's tests for supplied
functions so that we ignore libedit/libreadline except when probing
specifically for functions we expect them to provide.
Per report from Christoph Berg, though this is slightly more aggressive
than his proposed patch.
Get rid of the fundamentally indefensible assumption that "long long int"
exists and is exactly 64 bits wide on every platform Postgres runs on.
Instead let the configure script select the type to use for "pg_int64".
This is a bit of a pain in the rear since we do not want to pollute client
namespace with all the random symbols that pg_config.h defines; instead
we have to create a separate generated header file, "pg_config_ext.h".
But now that the infrastructure is there, we might have the ability to
add some other stuff that's long been wanting in this area.
Currently, the macros only work with fairly recent gcc versions, but there
is room to expand them to other compilers that have comparable features.
Heavily revised and autoconfiscated version of a patch by Andres Freund.
We previously supposed that any given platform would supply both or neither
of these functions, so that one configure test would be sufficient. It now
appears that at least on AIX this is not the case ... which is likely an
AIX bug, but nonetheless we need to cope with it. So use separate tests.
Per bug #6758; thanks to Andrew Hastie for doing the followup testing
needed to confirm what was happening.
Backpatch to 9.1, where we began using these functions.
We had put a test for libxml2's xmlStructuredErrorContext variable in
configure, but of course that doesn't work on Windows builds. The next
best alternative seems to be to test the LIBXML_VERSION symbol provided
by xmlversion.h.
Per report from Talha Bin Rizwan, though this fixes it in a different way
than his proposed patch.
Historically we have not worried about fsync'ing anything during initdb
(in fact, initdb intentionally passes -F to each backend launch to prevent
it from fsync'ing). But with filesystems getting more aggressive about
caching data, that's not such a good plan anymore. Make initdb do a pass
over the finished data directory tree to fsync everything. For testing
purposes, the -N/--nosync flag can be used to restore the old behavior.
Also, testing shows that on Linux, sync_file_range() is much faster than
posix_fadvise() for hinting to the kernel that an fsync is coming,
apparently because the latter blocks on a rather small request queue while
the former doesn't. So use this function if available in initdb, and also
in the backend's pg_flush_data() (where it currently will affect only the
speed of CREATE DATABASE's cloning step).
We will later make pg_regress invoke initdb with the --nosync flag
to avoid slowing down cases such as "make check" in contrib. But
let's not do so until we've shaken out any portability issues in this
patch.
Jeff Davis, reviewed by Andres Freund
All Unix-oid platforms that we currently support should have waitpid(),
since it's in V2 of the Single Unix Spec. Our git history shows that
the wait3 code was added to support NextStep, which we officially dropped
support for as of 9.2. So get rid of the configure test, and simplify the
macro spaghetti in reaper(). Per suggestion from Fujii Masao.
The $(or) make function was introduced in GNU make 3.81, so the
previous coding didn't work in 3.80. Write it differently, and
improve the variable naming to make more sense in the new coding.
configure handles INSTALL as a substitution variable specially, and
apparently it gets confused when it's set to empty. Use INSTALL_
instead as a workaround to avoid the issue.
In a3176dac22 we switched to using
install-sh unconditionally, because the configure check
AC_PROG_INSTALL would pick up any random program named install, which
has caused failure reports
(http://archives.postgresql.org/pgsql-hackers/2001-03/msg00312.php).
Now the configure check is much improved and should avoid false
positives. It has also been shown that using a system install program
can significantly reduce "make install" times, so it's worth trying.
ENABLE_DTRACE unused as of a7b7b07af3
HAVE_ERR_SET_MARK unused as of 4ed4b6c54e
HAVE_FCVT unused as of 4553e1d80f
HAVE_STRUCT_SOCKADDR_UN unused as of b4cea00a1f
HAVE_SYSCONF unused as of f83356c7f5
TM_IN_SYS_TIME never used, obsolescent per Autoconf documentation
These were apparently never used. The AC_SUBST was probably just
added in a copy-and-paste manner. (The shell variables continue to be
used inside configure. The change is just that we don't need them
outside of configure.)
Remove the following ports:
- dgux
- nextstep
- sunos4
- svr4
- ultrix4
- univel
These are obsolete and not worth rescuing. In most cases, there is
circumstantial evidence that they wouldn't work anymore anyway.
In the Fedora variant of MinGW, the openssl libraries have their normal
names, not libeay32 and libssleay32. Adjust configure probes to allow
that, per bug #6486.
Tomasz Ostrowski
The immediate impetus for this is that Noah Misch's patch to elide
unnecessary table and index rebuilds when changing typmod for temporal
types uses it; and this is extracted from that patch, with some
further commentary by me. But it seems logically separate from the
remainder of the patch, so I'm committing it separately; this is not
the first time someone has wanted fls() in the backend and probably
won't be the last.
If we end up using this in more performance-critical spots it may be
worthwhile to add some architecture-specific optimizations to our
src/port version of fls() - e.g. any x86 platform can implement this
using the assembly instruction BSRL. But performance won't matter
a bit for assessing typmod changes, so I'm not worried about that
right now.
Historically we've used the SWPB instruction for TAS() on ARM, but this
is deprecated and not available on ARMv6 and later. Instead, make use
of a GCC builtin if available. We'll still fall back to SWPB if not,
so as not to break existing ports using older GCC versions.
Eventually we might want to try using __sync_lock_test_and_set() on some
other architectures too, but for now that seems to present only risk and
not reward.
Back-patch to all supported versions, since people might want to use any
of them on more recent ARM chips.
Martin Pitt
The hint bit makes for a small but measurable performance improvement
in access to contended spinlocks.
On the other hand, some PPC chips give an illegal-instruction failure.
There doesn't seem to be a completely bulletproof way to tell whether the
hint bit will cause an illegal-instruction failure other than by trying
it; but most if not all 64-bit PPC machines should accept it, so follow
the Linux kernel's lead and assume it's okay to use it in 64-bit builds.
Of course we must also check whether the assembler accepts the command,
since even with a recent CPU the toolchain could be old.
Patch by Manabu Ori, significantly modified by me.
All supported platforms support the C89 standard function atexit()
(SunOS 4 probably being the last one not to), and supporting both
makes the code clumsy.
Suggested solution from Tom Lane. Problem discovered, probably not
for the first time, while testing the mingw-w64 32 bit compiler.
Backpatched to all live branches.
Original patch by Lars Kanis, reviewed by Nishiyama Tomoaki and tweaked some by me.
This compiler, or at least the latest version of it, is currently broken, and
only passes the regression tests if built with -O0.
Add __attribute__ decorations for printf format checking to the places that
were missing them. Fix the resulting warnings. Add
-Wmissing-format-attribute to the standard set of warnings for GCC, so these
don't happen again.
The warning fixes here are relatively harmless. The one serious problem
discovered by this was already committed earlier in
cf15fb5cab.
on Windows. ecpglib doesn't link with libpgport, but picks and compiles
the .c files it needs individually. To cope with that, move the setlocale()
wrapper from chklocale.c to a separate setlocale.c file, and include that
in ecpglib.
glibc renders random() thread-safe by wrapping a futex lock around it;
testing reveals that this limits the performance of pgbench on machines
with many CPU cores. Rather than switching to random_r(), which is
only available on GNU systems and crashes unless you use undocumented
alchemy to initialize the random state properly, switch to our built-in
implementation of erand48(), which is both thread-safe and concurrent.
Since the list of reasons not to use the operating system's erand48()
is getting rather long, rename ours to pg_erand48() (and similarly
for our implementations of lrand48() and srand48()) and just always
use those. We were already doing this on Cygwin anyway, and the
glibc implementation is not quite thread-safe, so pgbench wouldn't
be able to use that either.
Per discussion with Tom Lane.
libxml reports some errors (like invalid xmlns attributes) via the error
handler hook, but still returns a success indicator to the library caller.
This causes us to miss some errors that are important to report. Since the
"generic" error handler hook doesn't know whether the message it's getting
is for an error, warning, or notice, stop using that and instead start
using the "structured" error handler hook, which gets enough information
to be useful.
While at it, arrange to save and restore the error handler hook setting in
each libxml-using function, rather than assuming we can set and forget the
hook. This should improve the odds of working nicely with third-party
libraries that also use libxml.
In passing, volatile-ize some local variables that get modified within
PG_TRY blocks. I noticed this while testing with an older gcc version
than I'd previously tried to compile xml.c with.
Florian Pflug and Tom Lane, with extensive review/testing by Noah Misch
Flexible array members are a C99 feature that avoids "cheating" in the
declaration of variable-length arrays at the end of structs. With
Autoconf support, this should be transparent for older compilers.
We start with one use in gist.h because gcc 4.6 started to raise a
warning there. Over time, it can be expanded to other places in the
source, but they will likely need some review of sizeof and offsetof
usage. The current change in gist.h appears to be safe in this
regard.
This unifies a bunch of ugly #ifdef's in one place. Per discussion,
we only need this where HAVE_UNIX_SOCKETS, so no need to cover Windows.
Marko Kreen, some adjustment by Tom Lane
It turns out the reason we hadn't found out about the portability issues
with our credential-control-message code is that almost no modern platforms
use that code at all; the ones that used to need it now offer getpeereid(),
which we choose first. The last holdout was NetBSD, and they added
getpeereid() as of 5.0. So far as I can tell, the only live platform on
which that code was being exercised was Debian/kFreeBSD, ie, FreeBSD kernel
with Linux userland --- since glibc doesn't provide getpeereid(), we fell
back to the control message code. However, the FreeBSD kernel provides a
LOCAL_PEERCRED socket parameter that's functionally equivalent to Linux's
SO_PEERCRED. That is both much simpler to use than control messages, and
superior because it doesn't require receiving a message from the other end
at just the right time.
Therefore, add code to use LOCAL_PEERCRED when necessary, and rip out all
the credential-control-message code in the backend. (libpq still has such
code so that it can still talk to pre-9.1 servers ... but eventually we can
get rid of it there too.) Clean up related autoconf probes, too.
This means that libpq's requirepeer parameter now works on exactly the same
platforms where the backend supports peer authentication, so adjust the
documentation accordingly.
This is reported to be necessary on some versions of that OS. In service
of this, cause PGAC_PROG_CC_CFLAGS_OPT to reject switches that result in
compiler warnings, since on yet other versions of that OS, the switch does
nothing except provoke a warning.
Report and patch by Ibrar Ahmed, further tweaking by me.
With some compilers such as Clang and ICC emulating GCC, using a
version string of the form "GCC $version" can be quite misleading.
Also, a great while ago, the version output from gcc --version started
including the string "gcc", so it is redundant to repeat that. In
order to support ancient GCC versions, we now prefix the result with
"GCC " only if the version output does not start with a letter.
These functions should take a pg_locale_t, not a collation OID, and should
call mbstowcs_l/wcstombs_l where available. Where those functions are not
available, temporarily select the correct locale with uselocale().
This change removes the bogus assumption that all locales selectable in
a given database have the same wide-character conversion method; in
particular, the collate.linux.utf8 regression test now passes with
LC_CTYPE=C, so long as the database encoding is UTF8.
I decided to move the char2wchar/wchar2char functions out of mbutils.c and
into pg_locale.c, because they work on wchar_t not pg_wchar_t and thus
don't really belong with the mbutils.c functions. Keeping them where they
were would have required importing pg_locale_t into pg_wchar.h somehow,
which did not seem like a good plan.
Mapped to NetBSD, the closest existing match. (Even though DragonFly
BSD is derived from FreeBSD, the shared library version numbering
matches NetBSD, and the rest is mostly the same among all BSD
variants.)
per "Rumko"
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
This is still pretty rough - among other things, the documentation
needs work, and the messages need a visit from the style police -
but this gets the basic framework in place.
KaiGai Kohei
The mingw people don't appear to care about compatibility with non-GNU
versions of getopt, so force use of our own copy of getopt on Windows.
Also, ensure that we make use of optreset when using our own copy.
Per report from Andrew Dunstan. Back-patch to all versions supported
on Windows.
wait until it is set. Latches can be used to reliably wait until a signal
arrives, which is hard otherwise because signals don't interrupt select()
on some platforms, and even when they do, there's race conditions.
On Unix, latches use the so called self-pipe trick under the covers to
implement the sleep until the latch is set, without race conditions. On
Windows, Windows events are used.
Use the new latch abstraction to sleep in walsender, so that as soon as
a transaction finishes, walsender is woken up to immediately send the WAL
to the standby. This reduces the latency between master and standby, which
is good.
Preliminary work by Fujii Masao. The latch implementation is by me, with
helpful comments from many people.
linking both executables and shared libraries, and we add on LDFLAGS_EX when
linking executables or LDFLAGS_SL when linking shared libraries. This
provides a significantly cleaner way of dealing with link-time switches than
the former behavior. Also, make sure that the various platform-specific
%.so: %.o rules incorporate LDFLAGS and LDFLAGS_SL; most of them missed that
before. (I did not add these variables for the platforms that invoke $(LD)
directly, however. It's not clear if we can do that safely, since for the
most part we assume these variables use CC command-line syntax.)
Per gripe from Aaron Swenson and subsequent investigation.
compilers, by applying a configure check to see if the compiler will accept
an unreferenced "static inline foo ..." function without warnings. It is
believed that such warnings are the only reason not to declare inlined
functions in headers, if the compiler understands "inline" at all.
Kurt Harriman
posix_fadvise and other file-related functions can depend on _LARGEFILE_SOURCE
and/or _FILE_OFFSET_BITS. Per report from Robert Treat.
Back-patch to 8.4. This has been wrong all along, but we weren't really using
posix_fadvise in anger before, and AC_FUNC_FSEEKO seems to mask the issue well
enough for that function.
provide a working 64-bit integer datatype. As recently noted, we've been
broken on such platforms since early in the 8.4 development cycle. Since
it took nearly two years for anyone to even notice, it seems that the
rationale for continuing to support such platforms has reached the point
of non-existence. Rather than thrashing around to try to make it work
again, we'll just admit up front that this no longer works.
Back-patch to 8.4 since that branch is also broken.
We should go around to remove INT64_IS_BUSTED support, but just in HEAD,
so that seems like material for a separate commit.
This is more in keeping with modern practice, and is a first step towards
porting to Win64 (which has sizeof(pointer) > sizeof(long)).
Tsutomu Yamada, Magnus Hagander, Tom Lane
append_history(), if libreadline is new enough to have those functions
(they seem to be present at least since 4.2; but libedit may not have them).
This gives significantly saner behavior when two or more sessions overlap in
their use of the history file; although having two sessions exit at just the
same time is still perilous to your history. The behavior of \s remains
unchanged, ie, overwrite whatever was there.
Per bug #5052 from Marek Wójtowicz.
with the not-so-deprecated DNSServiceRegister. This patch shouldn't change
any user-visible behavior, it just gets rid of a deprecation warning in
--with-bonjour builds. The new code will fail on OS X releases before 10.3,
but it seems unlikely that anyone will want to run Postgres 8.5 on 10.2.
Update install-sh to that from Autoconf 2.63, plus our Darwin-specific
changes (which I simplified a bit). install-sh is now able to install
multiple files in one run, so we could simplify our makefiles sometime.
install-sh also now has a -d option to create directories, so we don't need
mkinstalldirs anymore.
Use AC_PROG_MKDIR_P in configure.in, so we can use mkdir -p when available
instead of install-sh -d. For consistency with the rest of the world,
the corresponding make variable has been renamed from $(mkinstalldirs) to
$(MKDIR_P).
This switches the man page building process to use the DocBook XSL stylesheet
toolchain. The previous targets for Docbook2X are removed. configure has been
updated to look for the new tools. The Documentation appendix contains the
new build instructions. There are also a few isolated tweaks in the
documentation to improve places that came out strangely in the man pages.
and extend configure to test for it properly instead of hard-wiring
an assumption that everybody but Windows has the rand48 functions.
(We do cheat to the extent of assuming that probing for erand48 will do
for the entire rand48 family.)
erand48() is unused as of this commit, but a followon patch will cause
GEQO to depend on it.
Andres Freund, additional hacking by Tom
This upgrades the configure infrastructure to the latest Autoconf version.
Some notable news are:
- The workaround for the broken fseeko() test is gone.
- Checking for unknown options is now provided by Autoconf itself.
- Fixes for Mac OS X
the system's getopt_long(). The previous coding was the result of a sloppy
discussion that failed to draw this distinction. The result was that PG
programs don't handle options as users of that platform expect. Per
gripe from Chuck McDevitt.
Although this is a pre-existing bug, I'm not backpatching since I think we
could do with a bit of beta testing before concluding this is really OK.
on AIX with a non-gcc compiler. The previous coding would do this only if
CC was exactly "xlc"; which is a bad idea, as demonstrated by trouble report
from Mihai Criveti.
Also, if linked against other versions than the default MSVCRT library
(for example the MSVC build which links against MSVCRT80), also update
the cache in the default MSVCRT at the same time.
This should fix the issues with setting LC_MESSAGES on the MSVC build.
Original patch from Hiroshi Inoue and Hiroshi Saito, much rewritten
by me.
we can get some buildfarm feedback about whether that function is still
problematic. (Note that the planned async-preread patch will not really
prove anything one way or the other in buildfarm testing, since it will
be inactive with default GUC settings.)
the * character at the beginning of a pattern, and it does not match
subdomains.
Since this means we no longer need fnmatch, remove the imported implementation
from port, along with the autoconf check for it.
This basically takes some build system code that was previously labeled
"Solaris" and ties it to the compiler rather than the operating system.
Author: Julius Stroffek <Julius.Stroffek@Sun.COM>
vintage Linux is even more broken than we realized: a link to libreadline
will succeed, and fail only at runtime. It seems that an AC_TRY_RUN test
is the only reliable way to check whether this is really safe. Per report
from Tatsuo.
shared libraries. We've tried this before and had problems with libreadline
not linking properly on some platforms, but that seems to be a libreadline
bug that may have been fixed by now. In any case, it's early enough in the
8.4 devel cycle that we can afford to have some transient breakage while
we work out any portability problems.
On Darwin, we try -Wl,-dead_strip_dylibs, which seems to be the equivalent
incantation there.
any hardcoding of those options. Along the way, reorder the expression used to
calculate RELSEG_SIZE to make it slightly clearer. For now wal_segsize is only
allowed to have a value of 1 on Windows - we can relax that when we get full
large file support in the backend.
let XLOG_BLCKSZ and XLOG_SEG_SIZE be set via configure. Per a proposal by
Mark Wong, though I thought it better to call the switches after "wal" rather
than "xlog".
support for a nonsegmented mode from md.c. Per recent discussions, there
doesn't seem to be much value in a "never segment" option as opposed to
segmenting with a suitably large segment size. So instead provide a
configure-time switch to set the desired segment size in units of gigabytes.
While at it, expose a configure switch for BLCKSZ as well.
Zdenek Kotala
which is a global variable not a function, and so the probe failed on machines
where the linker makes a distinction (cf. Red Hat bug #444317). Probe for
an actual function instead.
where Datum is 8 bytes wide. Since this will break old-style C functions
(those still using version 0 calling convention) that have arguments or
results of these types, provide a configure option to disable it and retain
the old pass-by-reference behavior. Likewise, provide a configure option
to disable the recently-committed float4 pass-by-value change.
Zoltan Boszormenyi, plus configurability stuff by me.
This requires a working 64-bit integer type. If such a type cannot
be found, "--disable-integer-datetimes" can be used to switch
back to the previous floating point-based datetime implementation.
This prevents compiler optimizations that assume overflow won't occur, which
breaks numerous overflow tests that we need to have working. It is known
that gcc 4.3 causes problems and possible that 4.1 does. Per my proposal
of some time ago and a recent report from Kris Jurka.
Backpatch as far as 8.0, which is as far as the patch conveniently goes.
7.x was pretty short of overflow tests anyway, so it may not matter there,
even assuming that anyone cares whether 7.x builds on recent gcc.
than dividing them into 1GB segments as has been our longtime practice. This
requires working support for large files in the operating system; at least for
the time being, it won't be the default.
Zdenek Kotala
- Change configure.in to use Autoconf 2.61 and update generated files.
- Update build system and documentation to support now directory variables
offered by Autoconf 2.61.
- Replace usages of PGAC_CHECK_ALIGNOF by AC_CHECK_ALIGNOF, now available
in Autoconf 2.61.
- Drop our patched version of AC_C_INLINE, as Autoconf now has the change.
