Improve psql so that "ALTER TABLE foo VALIDATE CONSTRAINT <TAB>"
only offers not-convalidated entries. While it's not formally
wrong to offer validated ones, there's not much point either,
and it can save some typing if we incorporate this knowledge.
David Fetter, reviewed by Aleksander Alekseev
Discussion: https://postgr.es/m/20210427002433.GB17834@fetter.org
We can revert the code changes of commit b5febc1d1 now, because
commit 9a3ddeb51 installed a real solution for the difficulty
that b5febc1d1 just dodged, namely that the planner might pick
the wrong one of several index columns nominally containing the
same value. It only matters which one we pick if we pick one
that's not returnable, and that mistake is now foreclosed.
Although both of the aforementioned commits were back-patched,
I don't feel a need to take any risk by back-patching this one.
The cases that it improves are very corner-ish.
Discussion: https://postgr.es/m/3179992.1641150853@sss.pgh.pa.us
Commit 4ace45677 failed to fix the problem fully, because the
same issue of attempting to fetch a non-returnable index column
can occur when rechecking the indexqual after using a lossy index
operator. Moreover, it broke EXPLAIN for such indexquals (which
indicates a gap in our test cases :-().
Revert the code changes of 4ace45677 in favor of adding a new field
to struct IndexOnlyScan, containing a version of the indexqual that
can be executed against the index-returned tuple without using any
non-returnable columns. (The restrictions imposed by check_index_only
guarantee this is possible, although we may have to recompute indexed
expressions.) Support construction of that during setrefs.c
processing by marking IndexOnlyScan.indextlist entries as resjunk
if they can't be returned, rather than removing them entirely.
(We could alternatively require setrefs.c to look up the IndexOptInfo
again, but abusing resjunk this way seems like a reasonably safe way
to avoid needing to do that.)
This solution isn't great from an API-stability standpoint: if there
are any extensions out there that build IndexOnlyScan structs directly,
they'll be broken in the next minor releases. However, only a very
invasive extension would be likely to do such a thing. There's no
change in the Path representation, so typical planner extensions
shouldn't have a problem.
As before, back-patch to all supported branches.
Discussion: https://postgr.es/m/3179992.1641150853@sss.pgh.pa.us
Discussion: https://postgr.es/m/17350-b5bdcf476e5badbb@postgresql.org
Adjust the error texts used for unrecognized/unsupported datetime
units so that there are just two strings to translate, not two
per datatype. Along the way, follow our usual error message style
of not double-quoting type names, and instead making sure that we
say the name is a type. Fix a couple of places in date.c that
were using the wrong one of "unrecognized" and "unsupported".
Nikhil Benesch, with a bit more editing by me
Discussion: https://postgr.es/m/CAPWqQZTURGixmbMH2_Z3ZtWGA0ANjUb9bwtkkxSxSfDeFHuM6Q@mail.gmail.com
Since 4f0b096, pgss_store() does nothing if compute_query_id is disabled
or if no other module computed a query identifier, but the top comment
of this function did not reflect that. This behavior is already
documented in its own code path, and this just removes the inconsistent
comment.
Author: Kyotaro Horiguchi
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/20211122.153823.1325120762360533122.horikyota.ntt@gmail.com
Backpatch-through: 14
If an index has both returnable and non-returnable columns, and one of
the non-returnable columns is an expression using a Var that is in a
returnable column, then a query returning that expression could result
in an index-only scan plan that attempts to read the non-returnable
column, instead of recomputing the expression from the returnable
column as intended.
To fix, redefine the "indextlist" list of an IndexOnlyScan plan node
as containing null Consts in place of any non-returnable columns.
This solves the problem by preventing setrefs.c from falsely matching
to such entries. The executor is happy since it only cares about the
exposed types of the entries, and ruleutils.c doesn't care because a
correct plan won't reference those entries. I considered some other
ways to prevent setrefs.c from doing the wrong thing, but this way
seems good since (a) it allows a very localized fix, (b) it makes
the indextlist structure more compact in many cases, and (c) the
indextlist is now a more faithful representation of what the index AM
will actually produce, viz. nulls for any non-returnable columns.
This is easier to hit since we introduced included columns, but it's
possible to construct failing examples without that, as per the
added regression test. Hence, back-patch to all supported branches.
Per bug #17350 from Louis Jachiet.
Discussion: https://postgr.es/m/17350-b5bdcf476e5badbb@postgresql.org
Get rid of the "username_subquery" mechanism in favor of doing
local lookups of role names from role OIDs. The PG backend isn't
terribly smart about scalar SubLinks in SELECT output lists,
so this offers a small performance improvement, at least in
installations with more than a couple of users. In any case
the old method didn't make for particularly readable SQL code.
While at it, I removed the various custom warning messages about
failing to find an object's owner, in favor of just fatal'ing
in the local lookup function. AFAIK there is no reason any
longer to treat that as anything but a catalog-corruption case,
and certainly no reason to make translators deal with a dozen
different messages where one would do. (If it turns out that
fatal() is indeed a bad idea, we can back off to issuing
pg_log_warning() and returning an empty string, resulting in
the same behavior as before, except more consistent.)
Also drop an entirely unnecessary sub-SELECT to check on the
pg_depend status of a sequence relation: we already have a
LEFT JOIN to fetch the row of interest in the FROM clause.
Discussion: https://postgr.es/m/2460369.1640903318@sss.pgh.pa.us
Currently FreeBSD, Linux, macOS and Windows (Visual Studio) are tested.
The main goal of this integration is to make it easier to test in-development
patches across multiple platforms. This includes improving the testing done
automatically by cfbot [1] for commitfest entries. It is *not* the goal to
supersede the buildfarm.
cirrus-ci [2] was chosen because it was already in use for cfbot, allows using
full VMs, has good OS coverage and allows accessing the full test results
without authentication (like a github account). It might be worth adding
support for further CI providers, particularly ones supporting other git
forges, in the future.
To keep CI times tolerable, most platforms use pre-generated images. Some
platforms use containers, others use full VMs.
For instructions on how to enable the CI integration in a repository and
further details, see src/tools/ci/README
[1] http://cfbot.cputube.org/
[2] https://cirrus-ci.org/
Author: Andres Freund <andres@anarazel.de>
Author: Thomas Munro <tmunro@postgresql.org>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: Thomas Munro <tmunro@postgresql.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211001222752.wrz7erzh4cajvgp6@alap3.anarazel.de
dumpPublication, dumpPublicationNamespace, dumpPublicationTable, and
dumpSubscription failed to check dataOnly. This is just a latent bug,
because pg_backup_archiver.c would filter out the ArchiveEntry later;
but they're wasting cycles in data-only dumps, and the omission might
become a live bug someday. In any case, it's not good to have some
dumpFoo functions do this and some not.
On the same reasoning, make dumpPublicationNamespace follow the
same pattern as every other dumpFoo function for checking the
DUMP_COMPONENT_DEFINITION flag. (Since 5209c0ba0, we wouldn't
even get here if that flag isn't set, so checking it is just
pro forma right now. But it might not be so forever.)
Since this is just cosmetic and/or future-proofing, no need for
back-patch.
In the wake of commits 05649b88c and 5209c0ba0, findComments() and
findSecLabels() no longer use their "Archive *fout" arguments,
so get rid of those.
While doing that, I noticed that there's no very good reason why
dumpCompositeTypeColComments() should be doing its own query to fetch
the column names of the composite type, when the calling function has
just fetched the same data. Tweak it to use that query result. This
probably doesn't save a lot for most people, because since 5209c0ba0
we won't get into this code at all unless the composite type has at
least one comment. Nonetheless, it's a wasted query.
The reverted commit attempted to fix SQL specification compliance for
the cases which 6aaaa76bb left. This however broke existing behavior
which takes precedence over spec compliance so revert. The introduced
tests are left after the revert since the codepath isn't well covered.
Per bug report 17346. Backpatch down to 14 where it was introduced.
Reported-by: Andrew Bille <andrewbille@gmail.com>
Discussion: https://postgr.es/m/17346-f72b28bd1a341060@postgresql.org
The arch_filenames[] array elements were one byte too small, so that
a maximum-length filename would get corrupted if another entry
were made after it. (Noted by Thomas Munro, fix by Nathan Bossart.)
Move these arrays into a palloc'd struct, so that we aren't wasting
a few kilobytes of static data in each non-archiver process.
Add a binaryheap_reset() call to make it plain that we start the
directory scan with an empty heap. I don't think there's any live
bug of that sort, but it seems fragile, and this is very cheap
insurance.
Cleanup for commit beb4e9ba1, so no back-patch needed.
Discussion: https://postgr.es/m/CA+hUKGLHAjHuKuwtzsW7uMJF4BVPcQRL-UMZG_HM-g0y7yLkUg@mail.gmail.com
This seems like a clearer name for what it does now.
Provide a compatibility macro so that extensions don't have to convert
to the new name right away.
Discussion: https://postgr.es/m/116024.1640111629@sss.pgh.pa.us
Commit 75d22069e made SET print a warning if you tried to set an
unrecognized parameter within namespace previously reserved by an
extension. It seems better for that to be an outright error though,
for the same reason that we don't let you set unrecognized unqualified
parameter names. In any case, the preceding implementation was
inefficient and erroneous. Perform the check in a more appropriate
spot, and be more careful about prefix-match cases.
Discussion: https://postgr.es/m/116024.1640111629@sss.pgh.pa.us
Commit 6e0cb3dec1 added the tests that check that escape sequences in
postgres_fdw.application_name setting are replaced with status information
expectedly. But they were unstable and caused some buildfarm
members to report the failure. This commit reverts those unstable tests.
application_name that used when postgres_fdw establishes a connection to
a foreign server can be specified in either or both a connection parameter
of a server object and GUC postgres_fdw.application_name. This commit
allows those parameters to include escape sequences that begins with
% character. Then postgres_fdw replaces those escape sequences with
status information. For example, %d and %u are replaced with user name
and database name in local server, respectively. This feature enables us
to add information more easily to track remote transactions or queries,
into application_name of a remote connection.
Author: Hayato Kuroda
Reviewed-by: Kyotaro Horiguchi, Masahiro Ikeda, Hou Zhijie, Fujii Masao
Discussion: https://postgr.es/m/TYAPR01MB5866FAE71C66547C64616584F5EB9@TYAPR01MB5866.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/TYCPR01MB5870D1E8B949DAF6D3B84E02F5F29@TYCPR01MB5870.jpnprd01.prod.outlook.com
This commit moves parallel vacuum related code to a new file
commands/vacuumparallel.c so that any table AM supporting indexes can
utilize parallel vacuum in order to call index AM callbacks (ambulkdelete
and amvacuumcleanup) with parallel workers.
Another reason for this refactoring is that the parallel vacuum isn't
specific to heap so it doesn't make sense to keep this code in
heap/vacuumlazy.c.
Author: Masahiko Sawada, based on suggestion from Andres Freund
Reviewed-by: Hou Zhijie, Amit Kapila, Haiying Tang
Discussion: https://www.postgresql.org/message-id/20211030212101.ae3qcouatwmy7tbr%40alap3.anarazel.de
catalog/pg_class.h was stating that REPLICA_IDENTITY_INDEX with a
dropped index is equivalent to REPLICA_IDENTITY_DEFAULT. The code tells
a different story, as it is equivalent to REPLICA_IDENTITY_NOTHING.
The behavior exists since the introduction of replica identities, and
fe7fd4e even added tests for this case but I somewhat forgot to fix this
comment.
While on it, this commit reorganizes the documentation about replica
identities on the ALTER TABLE page, and a note is added about the case
of dropped indexes with REPLICA_IDENTITY_INDEX.
Author: Michael Paquier, Wei Wang
Reviewed-by: Euler Taveira
Discussion: https://postgr.es/m/OS3PR01MB6275464AD0A681A0793F56879E759@OS3PR01MB6275.jpnprd01.prod.outlook.com
Backpatch-through: 10
One code path related to this flavor of ALTER TABLE was checking that
the relation to detach has to be a normal table or a partitioned table,
which would fail if using the command with a different relation kind.
Views, sequences and materialized views cannot be part of a partition
tree, so these would cause the command to fail anyway, but the assertion
was triggered. Foreign tables can be part of a partition tree, and
again the assertion would have failed. The simplest solution is just to
remove this assertion, so as we get the same failure as the
non-concurrent code path.
While on it, add a regression test in postgres_fdw for the concurrent
partition detach of a foreign table, as per a suggestion from Alexander
Lakhin.
Issue introduced in 71f4c8c.
Reported-by: Alexander Lakhin
Author: Michael Paquier, Alexander Lakhin
Reviewed-by: Peter Eisentraut, Kyotaro Horiguchi
Discussion: https://postgr.es/m/17339-a9e09aaf38a3457a@postgresql.org
Backpatch-through: 14
Extensions that define any custom GUCs should call
EmitWarningsOnPlaceholders after doing so, to help catch misspellings.
Many of our contrib modules hadn't gotten the memo on that, though.
Also add such calls to src/test/modules extensions that have GUCs.
While these aren't really user-facing, they should illustrate good
practice not faulty practice.
Shinya Kato
Discussion: https://postgr.es/m/524fa2c0a34f34b68fbfa90d0760d515@oss.nttdata.com
There's no longer any reason to fire up a separate psql run
to create these functions. (Some refactoring in the main
regression tests is also called for, but that will take
more thought.)
Discussion: https://postgr.es/m/1655733.1639871614@sss.pgh.pa.us
"git mv" all the input/*.source and output/*.source files into
the corresponding sql/ and expected/ directories. Then remove
the pg_regress and Makefile infrastructure associated with
dynamic translation.
Discussion: https://postgr.es/m/1655733.1639871614@sss.pgh.pa.us
pg_regress has long had provisions for dynamically substituting path
names into regression test scripts and result files, but use of that
feature has always been a serious pain in the neck, mainly because
updating the result files requires tedious manual editing. Let's
get rid of that in favor of passing down the paths in environment
variables.
In addition to being easier to maintain, this way is capable of
dealing with path names that require escaping at runtime, for example
paths containing single-quote marks. (There are other stumbling
blocks in the way of actually building in a path that looks like
that, but removing this one seems like a good thing to do.) The key
coding rule that makes that possible is to concatenate pieces of a
dynamically-variable string using psql's \set command, and then use
the :'variable' notation to quote and escape the string for the next
level of interpretation.
In hopes of making this change more transparent to "git blame",
I've split it into two steps. This commit adds the necessary
pg_regress.c support and changes all the *.source files in-place
so that they no longer require any dynamic translation. The next
commit will just "git mv" them into the regular sql/ and expected/
directories.
Discussion: https://postgr.es/m/1655733.1639871614@sss.pgh.pa.us
\getenv fetches the value of an environment variable into a psql
variable. This is the inverse of the \setenv command that was added
over ten years ago. We'd not seen a compelling use-case for \getenv
at the time, but upcoming regression test refactoring provides a
sufficient reason to add it now.
Discussion: https://postgr.es/m/1655733.1639871614@sss.pgh.pa.us
Our previous validator used a traditional algorithm that performed
comparison and branching one byte at a time. It's useful in that
we always know exactly how many bytes we have validated, but that
precision comes at a cost. Input validation can show up prominently
in profiles of COPY FROM, and future improvements to COPY FROM such
as parallelism or faster line parsing will put more pressure on input
validation. Hence, add fast paths for both ASCII and multibyte UTF-8:
Use bitwise operations to check 16 bytes at a time for ASCII. If
that fails, use a "shift-based" DFA on those bytes to handle the
general case, including multibyte. These paths are relatively free
of branches and thus robust against all kinds of byte patterns. With
these algorithms, UTF-8 validation is several times faster, depending
on platform and the input byte distribution.
The previous coding in pg_utf8_verifystr() is retained for short
strings and for when the fast path returns an error.
Review, performance testing, and additional hacking by: Heikki
Linakangas, Vladimir Sitnikov, Amit Khandekar, Thomas Munro, and
Greg Stark
Discussion:
https://www.postgresql.org/message-id/CAFBsxsEV_SzH%2BOLyCiyon%3DiwggSyMh_eF6A3LU2tiWf3Cy2ZQg%40mail.gmail.com
Coverity complained that parts of dumpFunc() and buildACLCommands()
were now unreachable, as indeed they are. Remove 'em.
In passing, make dumpFunc's handling of protrftypes less gratuitously
different from other fields.
This is an option consistent with what the other tools of src/bin/
(pg_checksums, pg_dump, pg_rewind and pg_basebackup) provide which is
useful for leveraging the I/O effort when testing things. This is not
to be used in a production environment.
All the regression tests of pg_upgrade are updated to use this new
option. This happens to cut at most a couple of seconds in environments
constrained on I/O, by avoiding a flush of data folder for the new
cluster upgraded.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/YbrhzuBmBxS/DkfX@paquier.xyz
In the wake of commit b073c3ccd, it's necessary to grant create
permissions on the public schema to PUBLIC to get many of the
core regression test scripts to pass. That commit did so via the
quick-n-dirty expedient of adding the GRANT to the tablespace test,
which runs first. This is problematic for single-machine
replication testing, though. The least painful way to run the
regression tests on such a setup is to skip the tablespace test,
and that no longer works.
To fix, let's invent a separate "test_setup" script to run first,
and put the GRANT there. Revert b073c3ccd's changes to
the tablespace.source files.
In the future it might be good to try to reduce coupling between
the various test scripts by having test_setup create widely-used
objects, with the goal that most of the scripts could run after
having run only test_setup. That's going to take some effort,
so this commit just addresses my immediate pain point.
Discussion: https://postgr.es/m/1363170.1639763559@sss.pgh.pa.us
pg_strtouint64() is a wrapper around strtoull/strtoul/_strtoui64, but
it seems no longer necessary to have this indirection.
msvc/Solution.pm claims HAVE_STRTOULL, so the "MSVC only" part seems
unnecessary. Also, we have code in c.h to substitute alternatives for
strtoull() if not found, and that would appear to cover all currently
supported platforms, so having a further fallback in pg_strtouint64()
seems unnecessary.
Therefore, we could remove pg_strtouint64(), and use strtoull()
directly in all call sites. However, it seems useful to keep a
separate notation for parsing exactly 64-bit integers, matching the
type definition int64/uint64. For that, add new macros strtoi64() and
strtou64() in c.h as thin wrappers around strtol()/strtoul() or
strtoll()/stroull(). This makes these functions available everywhere
instead of just in the server code, and it makes the function naming
notably different from the pg_strtointNN() functions in numutils.c,
which have a different API.
Discussion: https://www.postgresql.org/message-id/flat/a3df47c9-b1b4-29f2-7e91-427baf8b75a3%40enterprisedb.com
