variables is varchar. This fixes this test case:
int main(void)
{
exec sql begin declare section;
varchar a[50], b[50];
exec sql end declare section;
return 0;
}
Since varchars are internally turned into custom structs and
the type name is emitted for these variable declarations,
the preprocessed code previously had:
struct varchar_1 { ... } a _,_ struct varchar_2 { ... } b ;
The comma in the generated C file was a syntax error.
There are no regression test changes since it's not exercised.
Patch by Boszormenyi Zoltan <zb@cybertec.at>
This function formerly crashed if called as a statement-level trigger,
or if a column-name argument wasn't given.
In passing, add the trigger name to all error messages from the function.
(None of them are expected cases, so this shouldn't pose any compatibility
risk.)
Marc Cousin, reviewed by Sawada Masahiko
The previous coding labeled expressions such as pg_index.indkey[1:3] as
being of int2vector type; which is not right because the subscript bounds
of such a result don't, in general, satisfy the restrictions of int2vector.
To fix, implicitly promote the result of slicing int2vector to int2[],
or oidvector to oid[]. This is similar to what we've done with domains
over arrays, which is a good analogy because these types are very much
like restricted domains of the corresponding regular-array types.
A side-effect is that we now also forbid array-element updates on such
columns, eg while "update pg_index set indkey[4] = 42" would have worked
before if you were superuser (and corrupted your catalogs irretrievably,
no doubt) it's now disallowed. This seems like a good thing since, again,
some choices of subscripting would've led to results not satisfying the
restrictions of int2vector. The case of an array-slice update was
rejected before, though with a different error message than you get now.
We could make these cases work in future if we added a cast from int2[]
to int2vector (with a cast function checking the subscript restrictions)
but it seems unlikely that there's any value in that.
Per report from Ronan Dunklau. Back-patch to all supported branches
because of the crash risks involved.
If logging is enabled, either ereport() or fprintf() might stomp on errno
internally, causing this function to return the wrong result. That might
only end in a misleading error report, but in any code that's examining
errno to decide what to do next, the consequences could be far graver.
This has been broken since the very first version of this file in 2006
... it's a bit astonishing that we didn't identify this long ago.
Reported by Amit Kapila, though this isn't his proposed fix.
A pointer to a C string was treated as a pointer to a "name" datum and
passed to SPI_execute_plan(). This pointer would then end up being
passed through datumCopy(), which would try to copy the entire 64 bytes
of name data, thus running past the end of the C string. Fix by
converting the string to a proper name structure.
Found by LLVM AddressSanitizer.
pullup_replace_vars()'s decisions about whether a pulled-up replacement
expression needs to be wrapped in a PlaceHolderVar depend on the assumption
that what looks like a Var behaves like a Var. However, if the Var is a
join alias reference, later flattening of join aliases might replace the
Var with something that's not a Var at all, and should have been wrapped.
To fix, do a forcible pass of flatten_join_alias_vars() on the subquery
targetlist before we start to copy items out of it. We'll re-run that
processing on the pulled-up expressions later, but that's harmless.
Per report from Ken Tanzer; the added regression test case is based on his
example. This bug has been there since the PlaceHolderVar mechanism was
invented, but has escaped detection because the circumstances that trigger
it are fairly narrow. You need a flattenable query underneath an outer
join, which contains another flattenable query inside a join of its own,
with a dangerous expression (a constant or something else non-strict)
in that one's targetlist.
Having seen this, I'm wondering if it wouldn't be prudent to do all
alias-variable flattening earlier, perhaps even in the rewriter.
But that would probably not be a back-patchable change.
The command we're telling people to type needs to include double-quoting
around the unfortunately-chosen extension name. Twiddle the textual
quoting so that it looks somewhat sane. Per gripe from roadrunner6.
These bugs can cause data loss on standbys started with hot_standby=on at
the moment they start to accept read only queries, by marking committed
transactions as uncommited. The likelihood of such corruptions is small
unless the primary has a high transaction rate.
5a031a5556 fixed bugs in HS's startup logic
by maintaining less state until at least STANDBY_SNAPSHOT_PENDING state
was reached, missing the fact that both clog and subtrans are written to
before that. This only failed to fail in common cases because the usage
of ExtendCLOG in procarray.c was superflous since clog extensions are
actually WAL logged.
f44eedc3f0f347a856eea8590730769125964597/I then tried to fix the missing
extensions of pg_subtrans due to the former commit's changes - which are
not WAL logged - by performing the extensions when switching to a state
> STANDBY_INITIALIZED and not performing xid assignments before that -
again missing the fact that ExtendCLOG is unneccessary - but screwed up
twice: Once because latestObservedXid wasn't updated anymore in that
state due to the earlier commit and once by having an off-by-one error in
the loop performing extensions. This means that whenever a
CLOG_XACTS_PER_PAGE (32768 with default settings) boundary was crossed
between the start of the checkpoint recovery started from and the first
xl_running_xact record old transactions commit bits in pg_clog could be
overwritten if they started and committed in that window.
Fix this mess by not performing ExtendCLOG() in HS at all anymore since
it's unneeded and evidently dangerous and by performing subtrans
extensions even before reaching STANDBY_SNAPSHOT_PENDING.
Analysis and patch by Andres Freund. Reported by Christophe Pettus.
Backpatch down to 9.0, like the previous commit that caused this.
Previously, -d option for pg_isready was broken. When the name of the
database was specified by -d option, pg_isready failed with an error.
When the conninfo specified by -d option contained the setting of the
host name but not Numeric IP address (i.e., hostaddr), pg_isready
displayed wrong connection message. -d option could not handle a valid
URI prefix at all. This commit fixes these bugs of pg_isready.
Backpatch to 9.3, where pg_isready was introduced.
Per report from Josh Berkus and Robert Haas.
Original patch by Fabrízio de Royes Mello, heavily modified by me.
Previously, pg_upgrade would abort copy_file() on a short write without
setting errno, which the caller would report as an error with the
message "Success". We assume ENOSPC in that case, as we do elsewhere in
the code. Also set errno in some other error cases in copy_file() to
avoid bogus "Success" error messages.
This was broken in 6b711cf37c, so 9.2 and
before are OK.
Previously, if VACUUM skipped vacuuming a page because it's pinned, it
didn't count that page as scanned. However, that meant that relfrozenxid
was not bumped up either, which prevented anti-wraparound vacuum from
doing its job.
Report by Миша Тюрин, analysis and patch by Sergey Burladyn and Jeff Janes.
Backpatch to 9.2, where the skip-locked-pages behavior was introduced.
A couple of places that should have been iterating over WORDS_PER_CHUNK
words were iterating over WORDS_PER_PAGE words instead. This thinko
accidentally failed to fail, because (at least on common architectures
with default BLCKSZ) WORDS_PER_CHUNK is a bit less than WORDS_PER_PAGE,
and the extra words being looked at were always zero so nothing happened.
Still, it's a bug waiting to happen if anybody ever fools with the
parameters affecting TIDBitmap sizes, and it's a small waste of cycles
too. So back-patch to all active branches.
Etsuro Fujita
Bug #8591 from Claudio Freire demonstrates that get_eclass_for_sort_expr
must be able to compute valid em_nullable_relids for any new equivalence
class members it creates. I'd worried about this in the commit message
for db9f0e1d9a, but claimed that it wasn't a
problem because multi-member ECs should already exist when it runs. That
is transparently wrong, though, because this function is also called by
initialize_mergeclause_eclasses, which runs during deconstruct_jointree.
The example given in the bug report (which the new regression test item
is based upon) fails because the COALESCE() expression is first seen by
initialize_mergeclause_eclasses rather than process_equivalence.
Fixing this requires passing the appropriate nullable_relids set to
get_eclass_for_sort_expr, and it requires new code to compute that set
for top-level expressions such as ORDER BY, GROUP BY, etc. We store
the top-level nullable_relids in a new field in PlannerInfo to avoid
computing it many times. In the back branches, I've added the new
field at the end of the struct to minimize ABI breakage for planner
plugins. There doesn't seem to be a good alternative to changing
get_eclass_for_sort_expr's API signature, though. There probably aren't
any third-party extensions calling that function directly; moreover,
if there are, they probably need to think about what to pass for
nullable_relids anyway.
Back-patch to 9.2, like the previous patch in this area.
Simple oversight in commit 1cb108efb0 ---
recursively examining a subquery output column is only sane if the
original Var refers to a single output column. Found by Kevin Grittner.
The pretty-printing logic in ruleutils.c operates by inserting a newline
and some indentation whitespace into strings that are already valid SQL.
This naturally results in leaving some trailing whitespace before the
newline in many cases; which can be annoying when processing the output
with other tools, as complained of by Joe Abbate. We can fix that in
a pretty localized fashion by deleting any trailing whitespace before
we append a pretty-printing newline. In addition, we have to modify the
code inserted by commit 2f582f76b1 so that
we also delete trailing whitespace when transposing items from temporary
buffers into the main result string, when a temporary item starts with a
newline.
This results in rather voluminous changes to the regression test results,
but it's easily verified that they are only removal of trailing whitespace.
Back-patch to 9.3, because the aforementioned commit resulted in many
more cases of trailing whitespace than had occurred in earlier branches.
Although the SQL spec forbids duplicate table aliases, historically
we've allowed queries like
SELECT ... FROM tab1 x CROSS JOIN (tab2 x CROSS JOIN tab3 y) z
on the grounds that the aliased join (z) hides the aliases within it,
therefore there is no conflict between the two RTEs named "x". The
LATERAL patch broke this, on the misguided basis that "x" could be
ambiguous if tab3 were a LATERAL subquery. To avoid breaking existing
queries, it's better to allow this situation and complain only if
tab3 actually does contain an ambiguous reference. We need only remove
the check that was throwing an error, because the column lookup code
is already prepared to handle ambiguous references. Per bug #8444.
This is a similar fix as c6ec8793aa
9.2. This should never happen in 9.3 and newer since the special case
cannot happen there, but this patch synchronizes up the code so there
is no confusion on why they're different. An empty block is as harmless
in 9.3 as it was in 9.2, and can safely be ignored.
If a page is deleted, and reused for something else, just as a search is
following a rightlink to it from its left sibling, the search would continue
scanning whatever the new contents of the page are. That could lead to
incorrect query results, or even something more curious if the page is
reused for a different kind of a page.
To fix, modify the search algorithm to lock the next page before releasing
the previous one, and refrain from deleting pages from the leftmost branch
of the tree.
Add a new Concurrency section to the README, explaining why this works.
There is a lot more one could say about concurrency in GIN, but that's for
another patch.
Backpatch to all supported versions.
This change prevents us from doing inappropriate subquery flattening in
cases such as dangerous functions hidden inside a sub-SELECT in the
targetlist of another sub-SELECT. That could result in unexpected behavior
due to multiple evaluations of a volatile function, as in a recent
complaint from Etienne Dube. It's been questionable from the very
beginning whether these functions should look into subqueries (as noted in
their comments), and this case seems to provide proof that they should.
Because the new code only descends into SubLinks, not SubPlans or
InitPlans, the change only affects the planner's behavior during
prepjointree processing and not later on --- for example, you can still get
it to use a volatile function in an indexqual if you wrap the function in
(SELECT ...). That's a historical behavior, for sure, but it's reasonable
given that the executor's evaluation rules for subplans don't depend on
whether there are volatile functions inside them. In any case, we need to
constrain the behavioral change as narrowly as we can to make this
reasonable to back-patch.
contain_volatile_functions() is best applied to the output of
expression_planner(), not its input, so that insertion of function
default arguments and constant-folding have been done. (See comments
at CheckMutability, for instance.) It's perhaps unlikely that anyone
will notice a difference in practice, but still we should do it properly.
In passing, change variable type from Node* to Expr* to reduce the net
number of casts needed.
Noted while perusing uses of contain_volatile_functions().
Back-patch commits 8e68816cc2 and
8dace66e07 into the stable branches.
Buildfarm testing revealed no great portability surprises, and it
seems useful to have this robustness improvement in all branches.
ExecBuildSlotValueDescription() printed "null" for each dropped column in
a row being complained of by ExecConstraints(). This has some sanity in
terms of the underlying implementation, but is of course pretty surprising
to users. To fix, we must pass the target relation's descriptor to
ExecBuildSlotValueDescription(), because the slot descriptor it had been
using doesn't get labeled with attisdropped markers.
Per bug #8408 from Maxim Boguk. Back-patch to 9.2 where the feature of
printing row values in NOT NULL and CHECK constraint violation messages
was introduced.
Michael Paquier and Tom Lane
Before jamming a desired targetlist into a plan node, one really ought to
make sure the plan node can handle projections, and insert a buffering
Result plan node if not. planagg.c forgot to do this, which is a hangover
from the days when it only dealt with IndexScan plan types. MergeAppend
doesn't project though, not to mention that it gets unhappy if you remove
its possibly-resjunk sort columns. The code accidentally failed to fail
for cases in which the min/max argument was a simple Var, because the new
targetlist would be equivalent to the original "flat" tlist anyway.
For any more complex case, it's been broken since 9.1 where we introduced
the ability to optimize min/max using MergeAppend, as reported by Raphael
Bauduin. Fix by duplicating the logic from grouping_planner that decides
whether we need a Result node.
In 9.2 and 9.1, this requires back-porting the tlist_same_exprs() function
introduced in commit 4387cf956b, else we'd
uselessly add a Result node in cases that worked before. It's rather
tempting to back-patch that whole commit so that we can avoid extra Result
nodes in mainline cases too; but I'll refrain, since that code hasn't
really seen all that much field testing yet.
These things didn't work because the planner omitted to do the necessary
preprocessing of a WindowFunc's argument list. Add the few dozen lines
of code needed to handle that.
Although this sounds like a feature addition, it's really a bug fix because
the default-argument case was likely to crash previously, due to lack of
checking of the number of supplied arguments in the built-in window
functions. It's not a security issue because there's no way for a
non-superuser to create a window function definition with defaults that
refers to a built-in C function, but nonetheless people might be annoyed
that it crashes rather than producing a useful error message. So
back-patch as far as the patch applies easily, which turns out to be 9.2.
I'll put a band-aid in earlier versions as a separate patch.
(Note that these features still don't work for aggregates, and fixing that
case will be harder since we represent aggregate arg lists as target lists
not bare expression lists. There's no crash risk though because CREATE
AGGREGATE doesn't accept defaults, and we reject named-argument notation
when parsing an aggregate call.)
Early close became apparent when invalidation messages were
processed in a new location under CLOBBER_CACHE_ALWAYS builds, due
to additional locking.
Back-patch to 9.3
For rather inscrutable reasons, SQL:2008 disallows copying-and-modifying a
window definition that has any explicit framing clause. The error message
we gave for this only made sense if the referencing window definition
itself contains an explicit framing clause, which it might well not.
Moreover, in the context of an OVER clause it's not exactly obvious that
"OVER (windowname)" implies copy-and-modify while "OVER windowname" does
not. This has led to multiple complaints, eg bug #5199 from Iliya
Krapchatov. Change to a hopefully more intelligible error message, and
in the case where we have just "OVER (windowname)", add a HINT suggesting
that omitting the parentheses will fix it. Also improve the related
documentation. Back-patch to all supported branches.
The parsing of WAL filenames of segments larger than > 255 was broken,
making pg_receivexlog unable to restart streaming after stopping it.
The bug was introduced by the changes in 9.3 to represent WAL segment number
as a 64-bit integer instead of two ints, log and seg. To fix, replace the
plain sscanf call with XLogFromFileName macro, which does the conversion
from log+seg to a 64-bit integer correcly.
Reported by Mika Eloranta.
Historically, printtup() has assumed that it could prevent memory leakage
by pfree'ing the string result of each output function and manually
managing detoasting of toasted values. This amounts to assuming that
datatype output functions never leak any memory internally; an assumption
we've already decided to be bogus elsewhere, for example in COPY OUT.
range_out in particular is known to leak multiple kilobytes per call, as
noted in bug #8573 from Godfried Vanluffelen. While we could go in and fix
that leak, it wouldn't be very notationally convenient, and in any case
there have been and undoubtedly will again be other leaks in other output
functions. So what seems like the best solution is to run the output
functions in a temporary memory context that can be reset after each row,
as we're doing in COPY OUT. Some quick experimentation suggests this is
actually a tad faster than the retail pfree's anyway.
This patch fixes all the variants of printtup, except for debugtup()
which is used in standalone mode. It doesn't seem worth worrying
about query-lifespan leaks in standalone mode, and fixing that case
would be a bit tedious since debugtup() doesn't currently have any
startup or shutdown functions.
While at it, remove manual detoast management from several other
output-function call sites that had copied it from printtup(). This
doesn't make a lot of difference right now, but in view of recent
discussions about supporting "non-flattened" Datums, we're going to
want that code gone eventually anyway.
Back-patch to 9.2 where range_out was introduced. We might eventually
decide to back-patch this further, but in the absence of known major
leaks in older output functions, I'll refrain for now.
Since the query has not been freshly parsed when executing REFRESH
MATERIALIZED VIEW, locks must be explicitly taken before rewrite.
Backpatch to 9.3.
Andres Freund
A subquery reference to a matview should be allowed by CREATE
MATERIALIZED VIEW WITH NO DATA, just like a direct reference is.
Per bug report from Laurent Sartran.
Backpatch to 9.3.
The original coding thought this case was impossible, but it can happen
if the bgwriter or checkpointer processes decide to write out an index
page while creation is still proceeding, leading to a bogus "unexpected
spgdoinsert() failure" error. Problem reported by Jonathan S. Katz.
Teodor Sigaev
Callers expect that they only have to set the right resource owner when
creating a BufFile, not during subsequent operations on it. While we could
insist this be fixed at the caller level, it seems more sensible for the
BufFile to take care of it. Without this, some temp files belonging to
a BufFile can go away too soon, eg at the end of a subtransaction,
leading to errors or crashes.
Reported and fixed by Andres Freund. Back-patch to all active branches.
Formerly, when using a SQL-spec timezone setting with a fixed GMT offset
(called a "brute force" timezone in the code), the session_timezone
variable was not updated to match the nominal timezone; rather, all code
was expected to ignore session_timezone if HasCTZSet was true. This is
of course obviously fragile, though a search of the code finds only
timeofday() failing to honor the rule. A bigger problem was that
DetermineTimeZoneOffset() supposed that if its pg_tz parameter was
pointer-equal to session_timezone, then HasCTZSet should override the
parameter. This would cause datetime input containing an explicit zone
name to be treated as referencing the brute-force zone instead, if the
zone name happened to match the session timezone that had prevailed
before installing the brute-force zone setting (as reported in bug #8572).
The same malady could affect AT TIME ZONE operators.
To fix, set up session_timezone so that it matches the brute-force zone
specification, which we can do using the POSIX timezone definition syntax
"<abbrev>offset", and get rid of the bogus lookaside check in
DetermineTimeZoneOffset(). Aside from fixing the erroneous behavior in
datetime parsing and AT TIME ZONE, this will cause the timeofday() function
to print its result in the user-requested time zone rather than some
previously-set zone. It might also affect results in third-party
extensions, if there are any that make use of session_timezone without
considering HasCTZSet, but in all cases the new behavior should be saner
than before.
Back-patch to all supported branches.
The C and POSIX standards state that strncpy's behavior is undefined when
source and destination areas overlap. While it remains dubious whether any
implementations really misbehave when the pointers are exactly equal, some
platforms are now starting to force the issue by complaining when an
undefined call occurs. (In particular OS X 10.9 has been seen to dump core
here, though the exact set of circumstances needed to trigger that remain
elusive. Similar behavior can be expected to be optional on Linux and
other platforms in the near future.) So tweak the code to explicitly do
nothing when nothing need be done.
Back-patch to all active branches. In HEAD, this also lets us get rid of
an exception in valgrind.supp.
Per discussion of a report from Matthias Schmitt.
The NetBSD shell apparently returns non-zero from an unset command if
the variable is already unset. This matters when, as in pg_upgrade's
test.sh, we are working under 'set -e'. To protect against this, we
first set the PG variables to an empty string before unsetting them
completely.
Error found on buildfarm member coypu, solution from Rémi Zara.
SGML documentation, as well as code comments, failed to note that an FDW's
validator will be applied to foreign-table options for foreign tables using
the FDW.
Etsuro Fujita
The absolute path to config file was not pfreed. There are probably more
small leaks here and there in the config file reload code and assign hooks,
and in practice no-one reloads the config files frequently enough for it to
be a problem, but this one is trivial enough that might as well fix it.
Backpatch to 9.3 where the leak was introduced.
Use a critical section when setting the all-visible flag on an empty page,
and WAL-logging it. log_newpage_buffer() contains an assertion that it
must be called inside a critical section, and it's the right thing to do
when modifying a buffer anyway.
Also, the page should be marked dirty before calling log_newpage_buffer(),
per the comment in log_newpage_buffer() and src/backend/access/transam/README.
Patch by Andres Freund, in response to my report. Backpatch to 9.2, like
the patch that introduced these bugs (a6370fd9).
