The basic rule we follow here is to always first include 'postgres.h' or
'postgres_fe.h' whichever is applicable, then system header includes and
then Postgres header includes. In this, we also follow that all the
Postgres header includes are in order based on their ASCII value. We
generally follow these rules, but the code has deviated in many places.
This commit makes it consistent just for contrib modules. The later
commits will enforce similar rules in other parts of code.
Author: Vignesh C
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com
Commit c0d0e54084 replaced the ones in the documentation, but missed out
on the ones in the code. Replace those as well, but unlike c0d0e54084,
don't backpatch the code changes to avoid breaking translations.
recovery.conf settings are now set in postgresql.conf (or other GUC
sources). Currently, all the affected settings are PGC_POSTMASTER;
this could be refined in the future case by case.
Recovery is now initiated by a file recovery.signal. Standby mode is
initiated by a file standby.signal. The standby_mode setting is
gone. If a recovery.conf file is found, an error is issued.
The trigger_file setting has been renamed to promote_trigger_file as
part of the move.
The documentation chapter "Recovery Configuration" has been integrated
into "Server Configuration".
pg_basebackup -R now appends settings to postgresql.auto.conf and
creates a standby.signal file.
Author: Fujii Masao <masao.fujii@gmail.com>
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Abhijit Menon-Sen <ams@2ndquadrant.com>
Author: Sergei Kornilov <sk@zsrv.org>
Discussion: https://www.postgresql.org/message-id/flat/607741529606767@web3g.yandex.ru/
There's a project policy against using plain "char buf[BLCKSZ]" local
or static variables as page buffers; preferred style is to palloc or
malloc each buffer to ensure it is MAXALIGN'd. However, that policy's
been ignored in an increasing number of places. We've apparently got
away with it so far, probably because (a) relatively few people use
platforms on which misalignment causes core dumps and/or (b) the
variables chance to be sufficiently aligned anyway. But this is not
something to rely on. Moreover, even if we don't get a core dump,
we might be paying a lot of cycles for misaligned accesses.
To fix, invent new union types PGAlignedBlock and PGAlignedXLogBlock
that the compiler must allocate with sufficient alignment, and use
those in place of plain char arrays.
I used these types even for variables where there's no risk of a
misaligned access, since ensuring proper alignment should make
kernel data transfers faster. I also changed some places where
we had been palloc'ing short-lived buffers, for coding style
uniformity and to save palloc/pfree overhead.
Since this seems to be a live portability hazard (despite the lack
of field reports), back-patch to all supported versions.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1535618100.1286.3.camel@credativ.de
These files are no longer requested on recovery (since
06f82b2961), so the code for handling them
here is useless.
Author: Yugo Nagata <nagata@sraoss.co.jp>
* Failure to check for malloc failure (ok, pretty unlikely here, but
that's not an excuse).
* Leakage of open fd on read error, and of malloc'd buffer always.
* Incorrect assumption that a short read would set errno to zero.
* Failure to adhere to message style conventions (in particular,
not reporting errno where relevant; using "couldn't open" rather than
"could not open" is not really in line with project style either).
* Missing newlines on some messages.
Coverity spotted the leak problems; I noticed the rest while
fixing the leaks.
For performance reasons a larger segment size than the default 16MB
can be useful. A larger segment size has two main benefits: Firstly,
in setups using archiving, it makes it easier to write scripts that
can keep up with higher amounts of WAL, secondly, the WAL has to be
written and synced to disk less frequently.
But at the same time large segment size are disadvantageous for
smaller databases. So far the segment size had to be configured at
compile time, often making it unrealistic to choose one fitting to a
particularly load. Therefore change it to a initdb time setting.
This includes a breaking changes to the xlogreader.h API, which now
requires the current segment size to be configured. For that and
similar reasons a number of binaries had to be taught how to recognize
the current segment size.
Author: Beena Emerson, editorialized by Andres Freund
Reviewed-By: Andres Freund, David Steele, Kuntal Ghosh, Michael
Paquier, Peter Eisentraut, Robert Hass, Tushar Ahuja
Discussion: https://postgr.es/m/CAOG9ApEAcQ--1ieKbhFzXSQPw_YLmepaa4hNdnY5+ZULpt81Mw@mail.gmail.com
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Where possible, use palloc or pg_malloc instead; otherwise, insert
explicit NULL checks.
Generally speaking, these are places where an actual OOM is quite
unlikely, either because they're in client programs that don't
allocate all that much, or they're very early in process startup
so that we'd likely have had a fork() failure instead. Hence,
no back-patch, even though this is nominally a bug fix.
Michael Paquier, with some adjustments by me
Discussion: <CAB7nPqRu07Ot6iht9i9KRfYLpDaF2ZuUv5y_+72uP23ZAGysRg@mail.gmail.com>
This fixes a bunch of somewhat pedantic warnings with new
compilers. Since by far the majority of other functions definitions use
the (void) style it just seems to be consistent to do so as well in the
remaining few places.
Commit 179cdd09 added macros to check if a filename is a WAL segment
or other such file. However there were still some instances of the
strlen + strspn combination to check for that in WAL-related utilities
like pg_archivecleanup. Those checks can be replaced with the macros.
This patch makes use of the macros in those utilities and
which would make the code a bit easier to read.
Back-patch to 9.5.
Michael Paquier
Previously, read() might have returned a length equal to the buffer
length, and then the subsequent store to buf[len] would write a
zero-byte one byte past the end. This doesn't seem likely to be
a security issue, but there's some chance it could result in
pg_standby misbehaving.
Spotted by Coverity; patch by Michael Paquier, reviewed by me.
Clear errno before calling readdir() and handle old MinGW errno bug
while adding full test coverage for readdir/closedir failures.
Backpatch through 8.4.
Coverity identified a number of places in which it couldn't prove that a
string being copied into a fixed-size buffer would fit. We believe that
most, perhaps all of these are in fact safe, or are copying data that is
coming from a trusted source so that any overrun is not really a security
issue. Nonetheless it seems prudent to forestall any risk by using
strlcpy() and similar functions.
Fixes by Peter Eisentraut and Jozef Mlich based on Coverity reports.
In addition, fix a potential null-pointer-dereference crash in
contrib/chkpass. The crypt(3) function is defined to return NULL on
failure, but chkpass.c didn't check for that before using the result.
The main practical case in which this could be an issue is if libc is
configured to refuse to execute unapproved hashing algorithms (e.g.,
"FIPS mode"). This ideally should've been a separate commit, but
since it touches code adjacent to one of the buffer overrun changes,
I included it in this commit to avoid last-minute merge issues.
This issue was reported by Honza Horak.
Security: CVE-2014-0065 for buffer overruns, CVE-2014-0066 for crypt()
We used to have externs for getopt() and its API variables scattered
all over the place. Now that we find we're going to need to tweak the
variable declarations for Cygwin, it seems like a good idea to have
just one place to tweak.
In this commit, the variables are declared "#ifndef HAVE_GETOPT_H".
That may or may not work everywhere, but we'll soon find out.
Andres Freund
The semantics of signal(2) are more variable than one could wish; in
particular, on strict-POSIX platforms the signal handler will be reset
to SIG_DFL when the signal is delivered. This demonstrably breaks
pg_test_fsync's use of SIGALRM. The other changes I made are not
absolutely necessary today, because the called handlers all exit the
program anyway. But it seems like a good general practice to use
pqsignal() exclusively in Postgres code, now that we have it available
everywhere.
Before, some places didn't document the short options (-? and -V),
some documented both, some documented nothing, and they were listed in
various orders. Now this is hopefully more consistent and complete.
For consistency with other tools, put the options before further usage
information.
In pg_standby, remove the supposedly deprecated -l option from the
given example invocation.
Windows doesn't do signal processing like other platforms do. It never
really worked, but recent changes to the signal handling made it crash.
This fixes bug #4961. Patch by Fujii Masao.
file to be a symlink. We tried to fix this issue with an earlier server-side
patch, but it didn't fix the whole issue.
The same bug is present in older releases as well, but the 8.4 train is
about to leave the station, and I'm not sure if have consensus on whether
we can remove the -l option in back-branches or do we need to attempt a
server-side fix to make symlinking safe.
Patch by Simon Riggs, per discussion on bug identified by Fujii Masao.
is run at the end of archive recovery, providing a chance to do external
cleanup. Modify pg_standby so that it no longer removes the trigger file,
that is to be done using the recovery_end_command now.
Provide a "smart" failover mode in pg_standby, where we don't fail over
immediately, but only after recovering all unapplied WAL from the archive.
That gives you zero data loss assuming all WAL was archived before
failover, which is what most users of pg_standby actually want.
recovery_end_command by Simon Riggs, pg_standby changes by Fujii Masao and
myself.
reinstalling the default signal handler doesn't work as it is on Windows.
Presumably core dumps on SIGQUIT are not a problem on Windows, so rather
than figure out what header files or other changes are required to make it
work, just don't bother.
postmaster uses for immediate shutdown. Trap SIGUSR1 as the preferred
signal for that.
Per report by Fujii Masao and subsequent discussion on -hackers.
