Back-patch of commits f039eaac71 and
1b812afb0e, which arranged (in 9.6+) to
make remote queries interruptible. It was known at the time that the
same problem existed in the back-branches, but I did not back-patch
for lack of a user complaint.
Michael Paquier and Etsuro Fujita, adjusted for older branches by me.
Per gripe from Suraj Kharage. This doesn't directly addresss Suraj's
gripe, but since the patch that will do so builds up on top of this
work, it seems best to back-patch this part first.
Discussion: http://postgr.es/m/CAF1DzPU8Kx+fMXEbFoP289xtm3bz3t+ZfxhmKavr98Bh-C0TqQ@mail.gmail.com
The POSIX standard does not say that the success return value for
fcntl(F_SETFD) and fcntl(F_SETFL) is zero; it says only that it's not -1.
We had several calls that were making the stronger assumption. Adjust
them to test specifically for -1 for strict spec compliance.
The standard further leaves open the possibility that the O_NONBLOCK
flag bit is not the only active one in F_SETFL's argument. Formally,
therefore, one ought to get the current flags with F_GETFL and store
them back with only the O_NONBLOCK bit changed when trying to change
the nonblock state. In port/noblock.c, we were doing the full pushup
in pg_set_block but not in pg_set_noblock, which is just weird. Make
both of them do it properly, since they have little business making
any assumptions about the socket they're handed. The other places
where we're issuing F_SETFL are working with FDs we just got from
pipe(2), so it's reasonable to assume the FDs' properties are all
default, so I didn't bother adding F_GETFL steps there.
Also, while pg_set_block deserves some points for trying to do things
right, somebody had decided that it'd be even better to cast fcntl's
third argument to "long". Which is completely loony, because POSIX
clearly says the third argument for an F_SETFL call is "int".
Given the lack of field complaints, these missteps apparently are not
of significance on any common platforms. But they're still wrong,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/30882.1492800880@sss.pgh.pa.us
Commit 9e43e8714 turns out to have been insufficient: not only is it
necessary to track tentative parent links while considering a set of
arc removals, but it's necessary to track tentative flag additions
as well. This is because we always merge arc target states into
arc source states; therefore, when considering a merge of the final
state with some other, it is the other state that will acquire a new
TSTATE_FIN bit. If there's another arc for the same color trigram
that would cause merging of that state with the initial state, we
failed to recognize the problem. The test cases for the prior commit
evidently only exercised situations where a tentative merge with the
initial state occurs before one with the final state. If it goes the
other way around, we'll happily merge the initial and final states,
either producing a broken final graph that would never match anything,
or triggering the Assert added by the prior commit.
It's tempting to consider switching the merge direction when the merge
involves the final state, but I lack the time to analyze that idea in
detail. Instead just keep track of the flag changes that would result
from proposed merges, in the same way that the prior commit tracked
proposed parent links.
Along the way, add some more debugging support, because I'm not entirely
confident that this is the last bug here. And tweak matters so that
the transformed.dot file uses small integers rather than pointer values
to identify states; that makes it more readable if you're just eyeballing
it rather than fooling with Graphviz. And rename a couple of identically
named struct fields to reduce confusion.
Per report from Corey Csuhta. Add a test case based on his example.
(Note: this case does not trigger the bug under 9.3, apparently because
its different measurement of costs causes it to stop merging states before
it hits the failure. I spent some time trying to find a variant that would
fail in 9.3, without success; but I'm sure such cases exist.)
Like the previous patch, back-patch to 9.3 where this code was added.
Report: https://postgr.es/m/E2B01A4B-4530-406B-8D17-2F67CF9A16BA@csuhta.com
regexport.c thought it could just ignore LACON arcs, but the correct
behavior is to treat them as satisfiable while consuming zero input
(rather reminiscently of commit 9f1e642d5). Otherwise, the emitted
simplified-NFA representation may contain no paths leading from initial
to final state, which unsurprisingly confuses pg_trgm, as seen in
bug #14623 from Jeff Janes.
Since regexport's output representation has no concept of an arc that
consumes zero input, recurse internally to find the next normal arc(s)
after any LACON transitions. We'd be forced into changing that
representation if a LACON could be the last arc reaching the final
state, but fortunately the regex library never builds NFAs with such
a configuration, so there always is a next normal arc.
Back-patch to 9.3 where this logic was introduced.
Discussion: https://postgr.es/m/20170413180503.25948.94871@wrigleys.postgresql.org
<selinux/label.h> includes <stdbool.h>, which creates an incompatible
We don't care if <stdbool.h> redefines "true"/"false"; those are close
enough.
Complaint and initial patch by Mike Palmiotto. Final approach per
Tom Lane's suggestion, as discussed on hackers. Backpatching to
all supported branches.
Discussion: https://postgr.es/m/flat/623bcaae-112e-ced0-8c22-a84f75ae0c53%40joeconway.com
Detect fclose() failures; given "ln -s /dev/full $PGDATA/devfull",
"pg_file_write('devfull', 'x', true)" now fails as it should. Don't
leak a stream when fwrite() fails. Remove a born-ineffective test that
aimed to skip zero-length writes. Back-patch to 9.2 (all supported
versions).
The logic for removing excess trigrams from the result was faulty.
It intends to avoid merging the initial and final states of the NFA,
which is necessary, but in testing whether removal of a specific trigram
would cause that, it failed to consider the combined effects of all the
state merges that that trigram's removal would cause. This could result
in a broken final graph that would never match anything, leading to GIN
or GiST indexscans not finding anything.
To fix, add a "tentParent" field that is used only within this loop,
and set it to show state merges that we are tentatively going to do.
While examining a particular arc, we must chase up through tentParent
links as well as regular parent links (the former can only appear atop
the latter), and we must account for state init/fin flag merges that
haven't actually been done yet.
To simplify the latter, combine the separate init and fin bool fields
into a bitmap flags field. I also chose to get rid of the "children"
state list, which seems entirely inessential.
Per bug #14563 from Alexey Isayko, which the added test cases are based on.
Back-patch to 9.3 where this code was added.
Report: https://postgr.es/m/20170222111446.1256.67547@wrigleys.postgresql.org
Discussion: https://postgr.es/m/8816.1487787594@sss.pgh.pa.us
This applies portions of commits b64b5ccb6 and b1aebbb6a to the older
branches, in hopes of getting -Werror builds to succeed there. The
applied changes simply remove useless tests, eg checking an unsigned
variable to see if it is >= 0. Recent versions of clang warn about
such tests by default.
This fixes problems where a plan must change but fails to do so,
as seen in a bug report from Rajkumar Raghuwanshi.
For ALTER FOREIGN TABLE OPTIONS, do this through the standard method of
forcing a relcache flush on the table. For ALTER FOREIGN DATA WRAPPER
and ALTER SERVER, just flush the whole plan cache on any change in
pg_foreign_data_wrapper or pg_foreign_server. That matches the way
we handle some other low-probability cases such as opclass changes, and
it's unclear that the case arises often enough to be worth working harder.
Besides, that gives a patch that is simple enough to back-patch with
confidence.
Back-patch to 9.3. In principle we could apply the code change to 9.2 as
well, but (a) we lack postgres_fdw to test it with, (b) it's doubtful that
anyone is doing anything exciting enough with FDWs that far back to need
this desperately, and (c) the patch doesn't apply cleanly.
Patch originally by Amit Langote, reviewed by Etsuro Fujita and Ashutosh
Bapat, who each contributed substantial changes as well.
Discussion: https://postgr.es/m/CAKcux6m5cA6rRPTKkqVdJ-R=KKDfe35Q_ZuUqxDSV_4hwga=og@mail.gmail.com
When libpq encounters a connection-level error, e.g. runs out of memory
while forming a result, there will be no error associated with PGresult,
but a message will be placed into PGconn's error buffer. postgres_fdw
takes care to use the PGconn error message when PGresult does not have
one, but dblink has been negligent in that regard. Modify dblink to mirror
what postgres_fdw has been doing.
Back-patch to all supported branches.
Author: Joe Conway
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/02fa2d90-2efd-00bc-fefc-c23c00eb671e%40joeconway.com
When dblink uses a postgres_fdw server name for its connection, it
is possible for the connection to have options that are invalid
with dblink (e.g. "updatable"). The recommended way to avoid this
problem is to use dblink_fdw servers instead. However there are use
cases for using postgres_fdw, and possibly other FDWs, for dblink
connection options, therefore protect against trying to use any
options that do not apply by using is_valid_dblink_option() when
building the connection string from the options.
Back-patch to 9.3. Although 9.2 supports FDWs for connection info,
is_valid_dblink_option() did not yet exist, and neither did
postgres_fdw, at least in the postgres source tree. Given the lack
of previous complaints, fixing that seems too invasive/not worth it.
Author: Corey Huinker
Reviewed-By: Joe Conway
Discussion: https://postgr.es/m/CADkLM%3DfWyXVEyYcqbcRnxcHutkP45UHU9WD7XpdZaMfe7S%3DRwA%40mail.gmail.com
When dblink or postgres_fdw detects an error on the remote side of the
connection, it will try to construct a local error message as best it
can using libpq's PQresultErrorField(). When no primary message is
available, it was bailing out with an unhelpful "unknown error". Make
that message better and more style guide compliant. Per discussion
on hackers.
Backpatch to 9.2 except postgres_fdw which didn't exist before 9.3.
Discussion: https://postgr.es/m/19872.1482338965%40sss.pgh.pa.us
There is a small window between when the server closes out the existing
segment and the new one is created. Put a loop around the open call in
this case to make sure we wait for the new file to actually appear.
As implemented, -e ran an EXPLAIN but then discarded the output, which
certainly seems pointless. Make it print to stdout instead. It's been
like that forever, so back-patch to all supported branches.
Daniel Gustafsson, reviewed by Andreas Scherbaum
Patch: <B97BDCB7-A3B3-4734-90B5-EDD586941629@yesql.se>
Due to simplistic quoting and confusion of database names with conninfo
strings, roles with the CREATEDB or CREATEROLE option could escalate to
superuser privileges when a superuser next ran certain maintenance
commands. The new coding rule for PQconnectdbParams() calls, documented
at conninfo_array_parse(), is to pass expand_dbname=true and wrap
literal database names in a trivial connection string. Escape
zero-length values in appendConnStrVal(). Back-patch to 9.1 (all
supported versions).
Nathan Bossart, Michael Paquier, and Noah Misch. Reviewed by Peter
Eisentraut. Reported by Nathan Bossart.
Security: CVE-2016-5424
Commits 4452000f3 et al established semantics for NullTest.argisrow that
are a bit different from its initial conception: rather than being merely
a cache of whether we've determined the input to have composite type,
the flag now has the further meaning that we should apply field-by-field
testing as per the standard's definition of IS [NOT] NULL. If argisrow
is false and yet the input has composite type, the construct instead has
the semantics of IS [NOT] DISTINCT FROM NULL. Update the comments in
primnodes.h to clarify this, and fix ruleutils.c and deparse.c to print
such cases correctly. In the case of ruleutils.c, this merely results in
cosmetic changes in EXPLAIN output, since the case can't currently arise
in stored rules. However, it represents a live bug for deparse.c, which
would formerly have sent a remote query that had semantics different
from the local behavior. (From the user's standpoint, this means that
testing a remote nested-composite column for null-ness could have had
unexpected recursive behavior much like that fixed in 4452000f3.)
In a related but somewhat independent fix, make plancat.c set argisrow
to false in all NullTest expressions constructed to represent "attnotnull"
constructs. Since attnotnull is actually enforced as a simple null-value
check, this is a more accurate representation of the semantics; we were
previously overpromising what it meant for composite columns, which might
possibly lead to incorrect planner optimizations. (It seems that what the
SQL spec expects a NOT NULL constraint to mean is an IS NOT NULL test, so
arguably we are violating the spec and should fix attnotnull to do the
other thing. If we ever do, this part should get reverted.)
Back-patch, same as the previous commit.
Discussion: <10682.1469566308@sss.pgh.pa.us>
start_postmaster() registered stop_postmaster_atexit as an atexit(3)
callback each time through, although the obvious intention was to do
so only once per program run. The extra registrations were harmless,
so long as we didn't exceed ATEXIT_MAX, but still it's a bug.
Artur Zakirov, with bikeshedding by Kyotaro Horiguchi and me
Discussion: <d279e817-02b5-caa6-215f-cfb05dce109a@postgrespro.ru>
In btree_gin and citext, avoid some not-particularly-interesting
dependencies on the sorting of 'aa'. In tsearch2, use COLLATE "C" to
remove an uninteresting dependency on locale sort order (and thereby
allow removal of a variant expected-file).
Also, in citext, avoid assuming that lower('I') = 'i'. This isn't relevant
to Danish but it does fail in Turkish.
The old code used SEQ_MINVALUE to get the smallest int64 value. This
was done as a convenience to avoid having to deal with INT64_IS_BUSTED,
but that is obsolete now. Also, it is incorrect because the smallest
int64 value is actually SEQ_MINVALUE-1. Fix by writing out the constant
the long way, as it is done elsewhere in the code.
After pg_upgrade, it is possible that some tuples' Xmax have multixacts
corresponding to the old installation; such multixacts cannot have
running members anymore. In many code sites we already know not to read
them and clobber them silently, but at least when VACUUM tries to freeze
a multixact or determine whether one needs freezing, there's an attempt
to resolve it to its member transactions by calling GetMultiXactIdMembers,
and if the multixact value is "in the future" with regards to the
current valid multixact range, an error like this is raised:
ERROR: MultiXactId 123 has not been created yet -- apparent wraparound
and vacuuming fails. Per discussion with Andrew Gierth, it is completely
bogus to try to resolve multixacts coming from before a pg_upgrade,
regardless of where they stand with regards to the current valid
multixact range.
It's possible to get from under this problem by doing SELECT FOR UPDATE
of the problem tuples, but if tables are large, this is slow and
tedious, so a more thorough solution is desirable.
To fix, we realize that multixacts in xmax created in 9.2 and previous
have a specific bit pattern that is never used in 9.3 and later (we
already knew this, per comments and infomask tests sprinkled in various
places, but we weren't leveraging this knowledge appropriately).
Whenever the infomask of the tuple matches that bit pattern, we just
ignore the multixact completely as if Xmax wasn't set; or, in the case
of tuple freezing, we act as if an unwanted value is set and clobber it
without decoding. This guarantees that no errors will be raised, and
that the values will be progressively removed until all tables are
clean. Most callers of GetMultiXactIdMembers are patched to recognize
directly that the value is a removable "empty" multixact and avoid
calling GetMultiXactIdMembers altogether.
To avoid changing the signature of GetMultiXactIdMembers() in back
branches, we keep the "allow_old" boolean flag but rename it to
"from_pgupgrade"; if the flag is true, we always return an empty set
instead of looking up the multixact. (I suppose we could remove the
argument in the master branch, but I chose not to do so in this commit).
This was broken all along, but the error-facing message appeared first
because of commit 8e9a16ab8f and was partially fixed in a25c2b7c4d.
This fix, backpatched all the way back to 9.3, goes approximately in the
same direction as a25c2b7c4d but should cover all cases.
Bug analysis by Andrew Gierth and Álvaro Herrera.
A number of public reports match this bug:
https://www.postgresql.org/message-id/20140330040029.GY4582@tamriel.snowman.nethttps://www.postgresql.org/message-id/538F3D70.6080902@publicrelay.comhttps://www.postgresql.org/message-id/556439CF.7070109@pscs.co.ukhttps://www.postgresql.org/message-id/SG2PR06MB0760098A111C88E31BD4D96FB3540@SG2PR06MB0760.apcprd06.prod.outlook.comhttps://www.postgresql.org/message-id/20160615203829.5798.4594@wrigleys.postgresql.org
Buildfarm member skink failed with symptoms suggesting that an
auto-analyze had happened and changed the plan displayed for a
test query. Although this is evidently of low probability,
regression tests that sometimes fail are no fun, so add commands
to force a bitmap scan to be chosen.
This patch essentially reverts commit 4c6780fd17, in favor of a much
simpler solution for the case where the new cluster would choose to create
a TOAST table but the old cluster doesn't have one: just don't create a
TOAST table.
The existing code failed in at least two different ways if the situation
arose: (1) ALTER TABLE RESET didn't grab an exclusive lock, so that the
lock sanity check in create_toast_table failed; (2) pg_upgrade did not
provide a pg_type OID for the new toast table, so that the crosscheck in
TypeCreate failed. While both these problems were introduced by later
patches, they show that the hack being used to cause TOAST table creation
is overwhelmingly fragile (and untested). I also note that before the
TypeCreate crosscheck was added, the code would have resulted in assigning
an indeterminate pg_type OID to the toast table, possibly causing a later
OID conflict in that catalog; so that it didn't really work even when
committed.
If we simply don't create a TOAST table, there will only be a problem if
the code tries to store a tuple that's wider than a page, and field
compression isn't sufficient to get it under a page. Given that the TOAST
creation threshold is intended to be about a quarter of a page, it's very
hard to believe that cross-version differences in the do-we-need-a-toast-
table heuristic could result in an observable problem. So let's just
follow the old version's conclusion about whether a TOAST table is needed.
(If we ever do change needs_toast_table() so much that this conclusion
doesn't apply, we can devise a solution at that time, and hopefully do
it in a less klugy way than 4c6780fd17 did.)
Back-patch to 9.3, like the previous patch.
Discussion: <8110.1462291671@sss.pgh.pa.us>
CHECK_PAGE_OFFSET_RANGE() has been unused forever.
CHECK_RELATION_BLOCK_RANGE() has been unused in pgstatindex.c ever since
bt_page_stats() and bt_page_items() functions were moved from pgstattuple
to pageinspect module. It still exists in pageinspect/btreefuncs.c.
Daniel Gustafsson
This didn't work because when we dropped and re-established a database
connection, we did not bother to reset session-specific state such as
the statements-are-prepared flags.
The st->prepared[] array certainly needs to be flushed, and I cleared a
couple of other fields as well that couldn't possibly retain meaningful
state for a new connection.
In passing, fix some bogus comments and strange field order choices.
Per report from Robins Tharakan.
Renaming a file using rename(2) is not guaranteed to be durable in face
of crashes. Use the previously added durable_rename()/durable_link_or_rename()
in various places where we previously just renamed files.
Most of the changed call sites are arguably not critical, but it seems
better to err on the side of too much durability. The most prominent
known case where the previously missing fsyncs could cause data loss is
crashes at the end of a checkpoint. After the actual checkpoint has been
performed, old WAL files are recycled. When they're filled, their
contents are fdatasynced, but we did not fsync the containing
directory. An OS/hardware crash in an unfortunate moment could then end
up leaving that file with its old name, but new content; WAL replay
would thus not replay it.
Reported-By: Tomas Vondra
Author: Michael Paquier, Tomas Vondra, Andres Freund
Discussion: 56583BDD.9060302@2ndquadrant.com
Backpatch: All supported branches
ltree/ltree_gist/ltxtquery's headers stores data at MAXALIGN alignment,
requiring some padding bytes. So far we left these uninitialized. Zero
those by using palloc0.
Author: Andres Freund
Reported-By: Andres Freund / valgrind / buildarm animal skink
Backpatch: 9.1-
Suppress creation of the pg_upgrade delete script when the new data
directory is inside the old data directory.
Reported-by: IRC
Backpatch-through: 9.3, where delete script tests were added
Dead or half-dead index leaf pages were incorrectly reported as live, as a
consequence of a code rearrangement I made (during a moment of severe brain
fade, evidently) in commit d287818eb5.
The index metapage was not counted in index_size, causing that result to
not agree with the actual index size on-disk.
Index root pages were not counted in internal_pages, which is inconsistent
compared to the case of a root that's also a leaf (one-page index), where
the root would be counted in leaf_pages. Aside from that inconsistency,
this could lead to additional transient discrepancies between the reported
page counts and index_size, since it's possible for pgstatindex's scan to
see zero or multiple pages marked as BTP_ROOT, if the root moves due to
a split during the scan. With these fixes, index_size will always be
exactly one page more than the sum of the displayed page counts.
Also, the index_size result was incorrectly documented as being measured in
pages; it's always been measured in bytes. (While fixing that, I couldn't
resist doing some small additional wordsmithing on the pgstattuple docs.)
Including the metapage causes the reported index_size to not be zero for
an empty index. To preserve the desired property that the pgstattuple
regression test results are platform-independent (ie, BLCKSZ configuration
independent), scale the index_size result in the regression tests.
The documentation issue was reported by Otsuka Kenji, and the inconsistent
root page counting by Peter Geoghegan; the other problems noted by me.
Back-patch to all supported branches, because this has been broken for
a long time.
The original code wasn't careful to test the file descriptor returned by
PQsocket() for an invalid socket. If an invalid socket did turn up,
that would amount to calling FD_ISSET with fd = -1, whereby undefined
behavior can be invoked.
To fix, test file descriptor for validity and stop further processing if
that fails.
Problem noticed by Coverity.
There is an existing FD_ISSET callsite that does check for invalid
sockets beforehand, but the error message reported by it was
strerror(errno); in testing the aforementioned change, that turns out to
result in "bad socket: Success" which isn't terribly helpful. Instead
use PQerrorMessage() in both places which is more likely to contain an
useful error message.
Backpatch-through: 9.1.
Commit e09996ff8d was one brick shy of a load: it didn't insist
that the detected JSON number be the whole of the supplied string.
This allowed inputs such as "2016-01-01" to be misdetected as valid JSON
numbers. Per bug #13906 from Dmitry Ryabov.
In passing, be more wary of zero-length input (I'm not sure this can
happen given current callers, but better safe than sorry), and do some
minor cosmetic cleanup.
The order of inclusion of .o files makes a difference in linker output;
not a functional difference, but still a bitwise difference, which annoys
some packagers who would like reproducible builds.
Report and patch by Christoph Berg
Both Blowfish and DES implementations of crypt() can take arbitrarily
long time, depending on the number of rounds specified by the caller;
make sure they can be interrupted.
Author: Andreas Karlsson
Reviewer: Jeff Janes
Backpatch to 9.1.
Also fix getErrorText() to return the right error string on failure.
This behavior now matches that of other operating systems.
Report by Noah Misch
Backpatch through 9.1
The tsquery, ltxtquery and query_int data types have a common ancestor.
Having acquired check_stack_depth() calls independently, each was
missing at least one call. Back-patch to 9.0 (all supported versions).
Certain short salts crashed the backend or disclosed a few bytes of
backend memory. For existing salt-induced error conditions, emit a
message saying as much. Back-patch to 9.0 (all supported versions).
Josh Kupershmidt
Security: CVE-2015-5288
This case seems to have been overlooked when unvalidated check constraints
were introduced, in 9.2. The code would attempt to dump such constraints
over again for each child table, even though adding them to the parent
table is sufficient.
In 9.2 and 9.3, also fix contrib/pg_upgrade/Makefile so that the "make
clean" target fully cleans up after a failed test. This evidently got
dealt with at some point in 9.4, but it wasn't back-patched. I ran into
it while testing this fix ...
Per bug #13656 from Ingmar Brouns.
If we have a local Var of say varchar type with default collation, and
we apply a RelabelType to convert that to text with default collation, we
don't want to consider that as creating an FDW_COLLATE_UNSAFE situation.
It should be okay to compare that to a remote Var, so long as the remote
Var determines the comparison collation. (When we actually ship such an
expression to the remote side, the local Var would become a Param with
default collation, meaning the remote Var would in fact control the
comparison collation, because non-default implicit collation overrides
default implicit collation in parse_collate.c.) To fix, be more precise
about what FDW_COLLATE_NONE means: it applies either to a noncollatable
data type or to a collatable type with default collation, if that collation
can't be traced to a remote Var. (When it can, FDW_COLLATE_SAFE is
appropriate.) We were essentially using that interpretation already at
the Var/Const/Param level, but we weren't bubbling it up properly.
An alternative fix would be to introduce a separate FDW_COLLATE_DEFAULT
value to describe the second situation, but that would add more code
without changing the actual behavior, so it didn't seem worthwhile.
Also, since we're clarifying the rule to be that we care about whether
operator/function input collations match, there seems no need to fail
immediately upon seeing a Const/Param/non-foreign-Var with nondefault
collation. We only have to reject if it appears in a collation-sensitive
context (for example, "var IS NOT NULL" is perfectly safe from a collation
standpoint, whatever collation the var has). So just set the state to
UNSAFE rather than failing immediately.
Per report from Jeevan Chalke. This essentially corrects some sloppy
thinking in commit ed3ddf918b, so back-patch
to 9.3 where that logic appeared.
