Per discussion, we should explain that we follow RFC 3339 and not really
the letter of the ISO 8601 spec for timestamp output format. Mostly
Brendan Jurd's wording, though I tweaked it to clarify that we do take 'T'
on input. Minor additional copy-editing and markup-tweaking, too.
initdb: Add -T option
oid2name: Put options in some non-random order
pg_dump: Put --section option in the right place
And some additional markup and terminology improvements.
When we create a temporary copy of the old node buffer, in stack, we mustn't
leak that into any of the long-lived data structures. Before this patch,
when we called gistPopItupFromNodeBuffer(), it got added to the array of
"loaded buffers". After gistRelocateBuildBuffersOnSplit() exits, the
pointer added to the loaded buffers array points to garbage. Often that goes
unnotied, because when we go through the array of loaded buffers to unload
them, buffers with a NULL pageBuffer are ignored, which can often happen by
accident even if the pointer points to garbage.
This patch fixes that by marking the temporary copy in stack explicitly as
temporary, and refrain from adding buffers marked as temporary to the array
of loaded buffers.
While we're at it, initialize nodeBuffer->pageBlocknum to InvalidBlockNumber
and improve comments a bit. This isn't strictly necessary, but makes
debugging easier.
Per recent discussion, the error message for this was actually a trifle
inaccurate, since it said "cannot be cast" which might be incorrect.
Adjust that wording, and add a HINT suggesting that a USING clause might
be needed.
If the amount of freespace on page was less than the amount reserved by
fillfactor, the calculation would underflow.
This fixes bug #6643 reported by Tomonari Katsumata.
We have no need for a timeout here really, but some broken products from
Redmond seem to lose FD_READ events occasionally, and waking up and
retrying the recv() is the only known way to work around that. Perhaps
somebody will be motivated to figure out a better answer here; but not I.
The BSD-ish members of the buildfarm all seem to think removing this
was a bad idea. It looks to me like it resulted in omitting the system
header inclusion necessary to detect the fields of struct tm correctly.
Since we have chosen to report socket EOF and error conditions via the
WL_SOCKET_READABLE flag bit, it's unsafe to wait only for
WL_SOCKET_WRITEABLE; the caller would never be notified of the socket
condition, and in some of these implementations WaitLatchOrSocket would
busy-wait until something else happens. Add this restriction to the API
specification, and add Asserts to check that callers don't try to do that.
At some point we might want to consider adjusting the API to relax this
restriction, but until we have an actual use case for waiting on a
write-only socket, it seems premature to design a solution.
ENABLE_DTRACE unused as of a7b7b07af3
HAVE_ERR_SET_MARK unused as of 4ed4b6c54e
HAVE_FCVT unused as of 4553e1d80f
HAVE_STRUCT_SOCKADDR_UN unused as of b4cea00a1f
HAVE_SYSCONF unused as of f83356c7f5
TM_IN_SYS_TIME never used, obsolescent per Autoconf documentation
Test results from buildfarm members mastodon/narwhal (Windows Server 2003)
make it look like that platform just plain loses FD_READ events
occasionally, and the only reason our previous coding seemed to work was
that it timed out every couple of seconds and retried the whole operation.
Try to verify this by reinserting a finite timeout into the pgstat loop.
This isn't meant to be a permanent patch either, just to confirm or
disprove a theory.
This should get rid of the usage of pgwin32_waitforsinglesocket entirely,
and perhaps thereby remove the race condition that's evidently still
present on some versions of Windows. The previous arrangement was a bit
unsafe anyway, since waiting at the recv() would not allow pgstat to notice
postmaster death.
When the "hot" members of PGPROC were split off to separate PGXACT structs,
many PGPROC fields referred to in comments were moved to PGXACT, but the
comments were neglected in the commit. Mostly this is just a search/replace
of PGPROC with PGXACT, but the way the dummy PGPROC entries are created for
prepared transactions changed more, making some of the comments totally
bogus.
Noah Misch
Log main-loop blocking events and the results of inquiry messages.
This is to get some clarity as to what's happening on those Windows
buildfarm members that still don't like the latch-ified stats collector.
This bulks up the postmaster log a tad, so I won't leave it in place for
long.
If the tablespace directory is missing entirely, we allow DROP TABLESPACE
to go through, on the grounds that it should be possible to clean up the
catalog entry in such a situation. However, we forgot that the pg_tblspc
symlink might still be there. We should try to remove the symlink too
(but not fail if it's no longer there), since not doing so can lead to
weird behavior subsequently, as per report from Michael Nolan.
There was some discussion of adding dependency links to prevent DROP
TABLESPACE when the catalogs still contain references to the tablespace.
That might be worth doing too, but it's an orthogonal question, and in
any case wouldn't be back-patchable.
Back-patch to 9.0, which is as far back as the logic looks like this.
We could possibly do something similar in 8.x, but given the lack of
reports I'm not sure it's worth the trouble, and anyway the case could
not arise in the form the logic is meant to cover (namely, a post-DROP
transaction rollback having resurrected the pg_tablespace entry after
some or all of the filesystem infrastructure is gone).
This reverts commit cb2f2873d6, restoring
the latch-ified stats collector logic. We'll soon see if this works any
better on the Windows buildfarm machines.
Make sure WaitLatchOrSocket regards FD_CLOSE as a read-ready condition.
We might want to tweak this further, but it was surely wrong as-is.
Make pgwin32_waitforsinglesocket detach its private event object from the
passed socket before returning. I suspect that failure to do so leads
to race conditions when other code (such as WaitLatchOrSocket) attaches
a different event object to the same socket. Moreover, the existing
coding meant that repeated calls to pgwin32_waitforsinglesocket would
perform ResetEvent on an event actively connected to a socket, which
is rumored to be an unsafe practice; the WSAEventSelect documentation
appears to recommend against this, though it does not say not to do it
in so many words.
Also, uniformly use the coding pattern "WSAEventSelect(s, NULL, 0)" to
detach events from sockets, rather than passing the event in the second
parameter. The WSAEventSelect documentation says that the second parameter
is ignored if the third is 0, so theoretically this should make no
difference. However, elsewhere on the same reference page the use of NULL
in this context is recommended, and I have found suggestions on the net
that some versions of Windows have bugs with a non-NULL second parameter
in this usage.
Some other mostly-cosmetic cleanup, such as using the right one of
WSAGetLastError and GetLastError for reporting errors from these functions.
rc should be an int here, not a pgsocket. Fairly harmless as long as
pgsocket is an integer type, but nonetheless wrong. Error introduced
in commit 87091cb1f1.
syslogger was coded to wake up once per second whether there was anything
useful to do or not. As part of our campaign to reduce the server's idle
power consumption, change it to use a latch for waiting. Now, in the
absence of any data to log or any signals to service, it will only wake up
at the programmed logfile rotation times (if any).
These were apparently never used. The AC_SUBST was probably just
added in a copy-and-paste manner. (The shell variables continue to be
used inside configure. The change is just that we don't need them
outside of configure.)
When using poll(), EOF on a socket is reported with the POLLHUP not
POLLIN flag (at least on Linux). WaitLatchOrSocket failed to check
this bit, causing it to go into a busy-wait loop if EOF occurs.
We earlier fixed the same mistake in the test for the state of the
postmaster_alive socket, but missed it for the caller-supplied socket.
Fortunately, this error is new in 9.2, since 9.1 only had a select()
based code path not a poll() based one.
Since we've got an "open items" list item about this, apparently some
people are pretty worried about it.
In passing remove a lot of trailing whitespace.
This example was quite old: it lacked the WAL writer and autovac launcher
as well as the more recently added checkpointer. Linux "ps" seems to show
slightly different stuff now too.
The string representation of ImportError changed. Remove printing
that; it's not necessary for the test.
The order in which members of a dict are printed changed. But this
was always implementation-dependent, so we have just been lucky for a
long time. Do the printing the hard way to ensure sorted order.
We previously recognized that citext wouldn't get marked as collatable
during pg_upgrade from a pre-9.1 installation, and hacked its
create-from-unpackaged script to manually perform the necessary catalog
adjustments. However, we overlooked the fact that domains over citext,
as well as the citext[] array type, need the same adjustments. Extend
the script to handle those cases.
Also, the documentation suggested that this was only an issue in pg_upgrade
scenarios, which is quite wrong; loading any dump containing citext from a
pre-9.1 server will also result in the type being wrongly marked.
I approached the documentation problem by changing the 9.1.2 release note
paragraphs about this issue, which is historically inaccurate. But it
seems better than having the information scattered in multiple places, and
leaving incorrect info in the 9.1.2 notes would be bad anyway. We'll still
need to mention the issue again in the 9.1.4 notes, but perhaps they can
just reference 9.1.2 for fix instructions.
Per report from Evan Carroll. Back-patch into 9.1.