All existing uses can get this information more easily from the
relation descriptor, so the detour through the syscache is not
necessary.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Like for relations, switching this parameter is optimistic by turning it
on each time a partitioned index gains a partition. So seeing this
parameter set to true means that the partitioned index has or has had
partitions. The flag cannot be reset yet for partitioned indexes, which
is something not obvious anyway as partitioned relations exist to have
partitions.
This allows to track more conveniently partition trees for indexes,
which will come in use with an upcoming patch helping in listing
partition trees with an SQL-callable function.
Author: Amit Langote
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/80306490-b5fc-ea34-4427-f29c52156052@lab.ntt.co.jp
The pg_verify_checksums test tries to create files with corrupt data
named "123." and "123_." But on Windows a file name with a trailing dot
is the same as a file without the trailing dot. In the first case this
will create a file with a "valid" name, which causes the test to fail in
an unexpected way, and in the secongd case this will be redandant as the
test already creates a file named "123_".
Bug discovered by buildfarm animal bowerbird.
On Windows this mean that the regression tests can now safely and
successfully run as Administrator, which is useful in situations like
Appveyor. Elsewhere it's a no-op.
Backpatch to 9.5 - this is harder in earlier branches and not worth the
trouble.
Discussion: https://postgr.es/m/650b0c29-9578-8571-b1d2-550d7f89f307@2ndQuadrant.com
PQnotifies() is defined to just process already-read data, not try to read
any more from the socket. (This is a debatable decision, perhaps, but I'm
hesitant to change longstanding library behavior.) The documentation has
long recommended calling PQconsumeInput() before PQnotifies() to ensure
that any already-arrived message would get absorbed and processed.
However, psql did not get that memo, which explains why it's not very
reliable about reporting notifications promptly.
Also, most (not quite all) callers called PQconsumeInput() just once before
a PQnotifies() loop. Taking this recommendation seriously implies that we
should do PQconsumeInput() before each call. This is more important now
that we have "payload" strings in notification messages than it was before;
that increases the probability of having more than one packet's worth
of notify messages. Hence, adjust code as well as documentation examples
to do it like that.
Back-patch to 9.5 to match related server fixes. In principle we could
probably go back further with these changes, but given lack of field
complaints I doubt it's worthwhile.
Discussion: https://postgr.es/m/CAOYf6ec-TmRYjKBXLLaGaB-jrd=mjG1Hzn1a1wufUAR39PQYhw@mail.gmail.com
Commit 4f85fde8e introduced some code that was meant to ensure that we'd
process cancel, die, sinval catchup, and notify interrupts while waiting
for client input. But there was a flaw: it supposed that the process
latch would be set upon arrival at secure_read() if any such interrupt
was pending. In reality, we might well have cleared the process latch
at some earlier point while those flags remained set -- particularly
notifyInterruptPending, which can't be handled as long as we're within
a transaction.
To fix the NOTIFY case, also attempt to process signals (except
ProcDiePending) before trying to read.
Also, if we see that ProcDiePending is set before we read, forcibly set the
process latch to ensure that we will handle that signal promptly if no data
is available. I also made it set the process latch on the way out, in case
there is similar logic elsewhere. (It remains true that we won't service
ProcDiePending here unless we need to wait for input.)
The code for handling ProcDiePending during a write needs those changes,
too.
Also be a little more careful about when to reset whereToSendOutput,
and improve related comments.
Back-patch to 9.5 where this code was added. I'm not entirely convinced
that older branches don't have similar issues, but the complaint at hand
is just about the >= 9.5 code.
Jeff Janes and Tom Lane
Discussion: https://postgr.es/m/CAOYf6ec-TmRYjKBXLLaGaB-jrd=mjG1Hzn1a1wufUAR39PQYhw@mail.gmail.com
About half of this is purely cosmetic changes to reduce the diff between
our code and theirs, like inserting "const" markers where they have them.
The other half is tracking actual code changes in zic.c and localtime.c.
I don't think any of these represent near-term compatibility hazards, but
it seems best to stay up to date.
I also fixed longstanding bugs in our code for producing the
known_abbrevs.txt list, which by chance hadn't been exposed before,
but which resulted in some garbage output after applying the upstream
changes in zic.c. Notably, because upstream removed their old phony
transitions at the Big Bang, it's now necessary to cope with TZif files
containing no DST transition times at all.
DST law changes in Chile, Fiji, and Russia (Volgograd).
Historical corrections for China, Japan, Macau, and North Korea.
Note: like the previous tzdata update, this involves a depressingly
large amount of semantically-meaningless churn in tzdata.zi. That
is a consequence of upstream's data compression method assigning
unstable abbreviations to DST rulesets. I complained about that
to them last time, and this version now uses an assignment method
that pays some heed to not changing abbreviations unnecessarily.
So hopefully, that'll be better going forward.
The original implementation of pg_verify_checksums used a blacklist to
decide which files should be skipped for scanning as they do not include
data checksums, like pg_internal.init or pg_control. However, this
missed two things:
- Some files are created within builds of EXEC_BACKEND and these were
not listed, causing failures on Windows.
- Extensions may create custom files in data folders, causing the tool
to equally fail.
This commit switches to a whitelist-like method instead by checking if
the files to scan are authorized relation files. This is close to a
reverse-engineering of what is defined in relpath.c in charge of
building the relation paths, and we could consider refactoring what this
patch does so as all routines are in a single place. This is left for
later.
This is based on a suggestion from Andres Freund. TAP tests are updated
so as multiple file patterns are tested. The bug has been spotted by
various buildfarm members as a result of b34e84f which has introduced
the TAP tests of pg_verify_checksums.
Author: Michael Paquier
Reviewed-by: Andrew Dunstan, Michael Banck
Discussion: https://postgr.es/m/20181012005614.GC26424@paquier.xyz
Backpatch-through: 11
Mixed-case names for transition tables weren't dumped correctly.
Oversight in commit 8c48375e5, per bug #15440 from Karl Czajkowski.
In passing, I couldn't resist a bit of code beautification.
Back-patch to v10 where this was introduced.
Discussion: https://postgr.es/m/15440-02d1468e94d63d76@postgresql.org
Background workers, including parallel workers, were generating
the same sequence of numbers in random(). This showed up as DSM
handle collisions when Parallel Hash created multiple segments,
but any code that calls random() in background workers could be
affected if it cares about different backends generating different
numbers.
Repair by making sure that all new processes initialize the seed
at the same time as they set MyProcPid and MyStartTime in a new
function InitProcessGlobals(), called by the postmaster, its
children and also standalone processes. Also add a new high
resolution MyStartTimestamp as a potentially useful by-product,
and remove SessionStartTime from struct Port as it is now
redundant.
No back-patch for now, as the known consequences so far are just
a bunch of harmless shm_open(O_EXCL) collisions.
Author: Thomas Munro
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D2eJj_6%3DB%2B2tEpGu2nf1BjthCf9nXXUouYvJJ4C5WSwhg%40mail.gmail.com
To avoid the sorts of problems complained of by Jakob Egger, it'd be
best if configure didn't emit any references to the sysroot path at all.
In the case of PL/Tcl, we can do that just by keeping our hands off the
TCL_INCLUDE_SPEC string altogether. In the case of PL/Perl, we need to
substitute -iwithsysroot for -I in the compile commands, which is easily
handled if we change to using a configure output variable that includes
the switch not only the directory name. Since PL/Tcl and PL/Python
already do it like that, this seems like good consistency cleanup anyway.
Hence, this replaces the advice given to Perl-related extensions in commit
5e2217131; instead of writing "-I$(perl_archlibexp)/CORE", they should
just write "$(perl_includespec)". (The old way continues to work, but not
on recent macOS.)
It's still the case that configure needs to be aware of the sysroot
path internally, but that's cleaner than what we had before.
As before, back-patch to all supported versions.
Discussion: https://postgr.es/m/20840.1537850987@sss.pgh.pa.us
es_leaf_result_relations doesn't exist; perhaps this was an old name
for es_tuple_routing_result_relations, or maybe this comment has gone
unmaintained through multiple rounds of whacking the code around.
Related comment in execnodes.h was both obsolete and ungrammatical.
If the lock wait query failed, isolationtester would report the
PQerrorMessage from some other connection, meaning there would be
no message or an unrelated one. This seems like a pretty unlikely
occurrence, but if it did happen, this bug could make it really
difficult/confusing to figure out what happened. That seems to
justify patching all the way back.
In passing, clean up another place where the "wrong" conn was used
for an error report. That one's not actually buggy because it's
a different alias for the same connection, but it's still confusing
to the reader.
A bug introduced in 0d5f05cde0
considered the *previous* partition's triggers when deciding whether
multi-insert can be used. Rearrange the code so that the current
partition is considered.
Author: Ashutosh Sharma <ashu.coek88@gmail.com>
Avoid allocating never-used entries in stmtCacheEntries[], other than the
intentionally-unused zero'th entry. Tie the array size directly to the
bucket count and size, rather than having undocumented dependencies between
three magic constants. Fix the hash calculation to be platform-independent
--- notably, it was sensitive to the signed'ness of "char" before, not to
mention having an unnecessary hard-wired dependency on the existence and
size of type "long long". (The lack of complaints says it's been a long
time since anybody tried to build PG on a compiler without "long long",
and certainly with the requirement for C99 this isn't a live bug anymore.
But it's still not per project coding style.) Fix ecpg_auto_prepare's
new-cache-entry path so that it increments the exec count for the new
cache entry not the dummy zero'th entry.
The last of those is an actual bug, though one of little consequence;
the rest is mostly future-proofing and neatnik-ism. Doesn't seem
necessary to back-patch.
In the IANA timezone code, tzparse() always tries to load the zone
file named by TZDEFRULES ("posixrules"). Previously, we'd hacked
that logic to skip the load in the "lastditch" code path, which we use
only to initialize the default "GMT" zone during GUC initialization.
That's critical for a couple of reasons: since we do not support leap
seconds, we *must not* allow "GMT" to have leap seconds, and since this
case runs before the GUC subsystem is fully alive, we'd really rather
not take the risk of pg_open_tzfile throwing any errors.
However, that still left the code reading TZDEFRULES on every other
call, something we'd noticed to the extent of having added code to cache
the result so it was only done once per process not a lot of times.
Andres Freund complained about the static data space used up for the
cache; but as long as the logic was like this, there was no point in
trying to get rid of that space.
We can improve matters by looking a bit more closely at what the IANA
code actually needs the TZDEFRULES data for. One thing it does is
that if "posixrules" is a leap-second-aware zone, the leap-second
behavior will be absorbed into every POSIX-style zone specification.
However, that's a behavior we'd really prefer to do without, since
for our purposes the end effect is to render every POSIX-style zone
name unsupported. Otherwise, the TZDEFRULES data is used only if
the POSIX zone name specifies DST but doesn't include a transition
date rule (e.g., "EST5EDT" rather than "EST5EDT,M3.2.0,M11.1.0").
That is a minority case for our purposes --- in particular, it
never happens when tzload() invokes tzparse() to interpret a
transition date rule string found in a tzdata zone file.
Hence, if we legislate that we're going to ignore leap-second data
from "posixrules", we can postpone the TZDEFRULES load into the path
where we actually need to substitute for a missing date rule string.
That means it will never happen at all in common scenarios, making it
reasonable to dynamically allocate the cache space when it does happen.
Even when the data is already loaded, this saves some cycles in the
common code path since we avoid a memcpy of 23KB or so. And, IMO at
least, this is a less ugly hack on the IANA logic than what we had
before, since it's not messing with the lastditch-vs-regular code paths.
Back-patch to all supported branches, not so much because this is a
critical change as that I want to keep all our copies of the IANA
timezone code in sync.
Discussion: https://postgr.es/m/20181015200754.7y7zfuzsoux2c4ya@alap3.anarazel.de
This removes a megabyte of storage that isn't used at all in ecpglib's
default operating mode --- you have to enable auto-prepare to get any
use out of it. Seems well worth the trouble to allocate on demand.
Discussion: https://postgr.es/m/20181015200754.7y7zfuzsoux2c4ya@alap3.anarazel.de
Looking at this code made my head hurt. Format the comments more
like the way it's done elsewhere, break a few overly long lines.
No actual code changes in this commit.
That's worth it, as fmgr_builtins is frequently accessed, and as
fmgr_builtins is one of the biggest constant variables in a backend.
On most 64bit systems this will change the size of the struct from
32byte to 24bytes. While that could make indexing into the array
marginally more expensive, the higher cache hit ratio is worth more,
especially because these days fmgr_builtins isn't searched with a
binary search anymore (c.f. 212e6f34d5).
Discussion: https://postgr.es/m/20181016201145.aa2dfeq54rhqzron@alap3.anarazel.de
Rethink the solution applied in commit 5e2217131 to get PL/Tcl to
build on macOS Mojave. I feared that adding -isysroot globally might
have undesirable consequences, and sure enough Jakob Egger reported
one: it complicates building extensions with a different Xcode version
than was used for the core server. (I find that a risky proposition
in general, but apparently it works most of the time, so we shouldn't
break it if we don't have to.)
We'd already adopted the solution for PL/Perl of inserting the sysroot
path directly into the -I switches used to find Perl's headers, and we
can do the same thing for PL/Tcl by changing the -iwithsysroot switch
that Apple's tclConfig.sh reports. This restricts the risks to PL/Perl
and PL/Tcl themselves and directly-dependent extensions, which is a lot
more pleasing in general than a global -isysroot switch.
Along the way, tighten the test to see if we need to inject the sysroot
path into $perl_includedir, as I'd speculated about upthread but not
gotten round to doing.
As before, back-patch to all supported versions.
Discussion: https://postgr.es/m/20840.1537850987@sss.pgh.pa.us
This allows the compiler / linker to mark affected pages as read-only.
Doing so requires casting constness away, as CreateDestReceiver()
returns both constant and non-constant dest receivers. That's fine
though, as any modification of the statically allocated receivers
would already have been a bug (and would now be caught on some
platforms).
Discussion: https://postgr.es/m/20181015200754.7y7zfuzsoux2c4ya@alap3.anarazel.de
The new unconsitify(underlying_type, var) macro allows to cast
constness away from a variable, but doesn't allow changing the
underlying type. Enforcement of the latter currently only works for
gcc like compilers.
Please note IT IS NOT SAFE to cast constness away if the variable will ever
be modified (it would be undefined behaviour). Doing so anyway can cause
compiler misoptimizations or runtime crashes (modifying readonly memory).
It is only safe to use when the the variable will not be modified, but API
design or language restrictions prevent you from declaring that
(e.g. because a function returns both const and non-const variables).
This'll be used in an upcoming change, but seems like it's independent
infrastructure.
Author: Andres Freund
Discussion: https://postgr.es/m/20181015200754.7y7zfuzsoux2c4ya@alap3.anarazel.de
The previous code here simply threw away whatever it knew about cache
entry ages whenever a counter overflow occurred. Since the counter
is int width and will be bumped once per format function execution,
overflows are not really so rare as to not be worth thinking about.
Instead, let's deal with the situation by halving all the age values,
essentially rescaling the age metric. In that way, we retain a
pretty accurate (if not quite perfect) idea of which entries are oldest.
We created a temp table, then switched to a new session, leaving
the old session to clean up its temp objects in background. If that
took long enough, the eventual attempt to drop the user that owns
the temp table could fail, as exhibited today by sidewinder.
Fix by dropping the temp table explicitly when we're done with it.
It's been like this for quite some time, so back-patch to all
supported branches.
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=sidewinder&dt=2018-10-16%2014%3A45%3A00
This eliminates circa 120KB of static data from Postgres' memory
footprint. In some usage patterns that space will get allocated
anyway, but in many processes it never will be allocated.
We can improve matters further by allocating only as many cache
entries as we actually use, rather than allocating the whole array
on first use. However, to avoid wasting lots of space due to
palloc's habit of rounding requests up to power-of-2 sizes, tweak
the maximum cacheable format string length to make the struct sizes
be powers of 2 or just less. The sizes I chose make the maximums
a little bit less than they were before, but I doubt it matters much.
While at it, rearrange struct FormatNode to avoid wasting quite so
much padding space. This change actually halves the size of that
struct on 64-bit machines.
Discussion: https://postgr.es/m/20181015200754.7y7zfuzsoux2c4ya@alap3.anarazel.de
This allows the compiler / linker to mark affected pages as read-only.
There's a fair number of pre-requisite changes, to allow the const
properly be propagated. Most of consts were already required for
correctness anyway, just not represented on the type-level. Arguably
we could be more aggressive in using consts in related code, but..
This requires using a few of the types underlying typedefs that
removes pointers (e.g. const NameData *) as declaring the typedefed
type constant doesn't have the same meaning (it makes the variable
const, not what it points to).
Discussion: https://postgr.es/m/20181015200754.7y7zfuzsoux2c4ya@alap3.anarazel.de
Reporting only the stderr is unhelpful when the problem is that the
server output we're getting doesn't match what was expected. So we
should report the query output too; and just for good measure, let's
print the query we used and the output we expected.
Back-patch to 9.5 where poll_query_until was introduced.
Discussion: https://postgr.es/m/17913.1539634756@sss.pgh.pa.us
Commit b5febc1d1 added a contrib/btree_gist test case that has been
observed to fail in the buildfarm as a result of background auto-analyze
updating stats and changing the selected plan. Forestall that by
forcibly analyzing in foreground, instead. The new plan choice is
just as good for our purposes, since we really only care that an
index-only plan does not get selected.
Back-patch to 9.5, like the previous patch.
Discussion: https://postgr.es/m/14643.1539629304@sss.pgh.pa.us
localtime.c's "struct state" is a rather large object, ~23KB. We were
statically allocating one for gmtsub() to use to represent the GMT
timezone, even though that function is not at all heavily used and is
never reached in most backends. Let's malloc it on-demand, instead.
This does pose the question of how to handle a malloc failure, but
there's already a well-defined error report convention here, ie
set errno and return NULL.
We have but one caller of pg_gmtime in HEAD, and two in back branches,
neither of which were troubling to check for error. Make them do so.
The possible errors are sufficiently unlikely (out-of-range timestamp,
and now malloc failure) that I think elog() is adequate.
Back-patch to all supported branches to keep our copies of the IANA
timezone code in sync. This particular change is in a stanza that
already differs from upstream, so it's a wash for maintenance purposes
--- but only as long as we keep the branches the same.
Discussion: https://postgr.es/m/20181015200754.7y7zfuzsoux2c4ya@alap3.anarazel.de
This allows the compiler / linker to mark affected pages as read-only.
There's other cases, but they're a bit more invasive, and should go
through some review. These are easy.
They were found with
objdump -j .data -t src/backend/postgres|awk '{print $4, $5, $6}'|sort -r|less
Discussion: https://postgr.es/m/20181015200754.7y7zfuzsoux2c4ya@alap3.anarazel.de
There's several reasons for this change:
1) It reduces the total size of TupleTableSlot / reduces alignment
padding, making the commonly accessed members fit into a single
cacheline (but we currently do not force proper alignment, so
that's not yet guaranteed to be helpful)
2) Combining the booleans into a flag allows to combine read/writes
from memory.
3) With the upcoming slot abstraction changes, it allows to have core
and extended flags, in a memory efficient way.
Author: Ashutosh Bapat and Andres Freund
Discussion: https://postgr.es/m/20180220224318.gw4oe5jadhpmcdnm@alap3.anarazel.de
heaptuple.c was never a particular good fit for slot_getattr(),
slot_getsomeattrs() and slot_getmissingattrs(), but in upcoming
changes slots will be made more abstract (allowing slots that contain
different types of tuples), making it clearly the wrong place.
Note that slot_deform_tuple() remains in it's current place, as it
clearly deals with a HeapTuple. getmissingattrs() also remains, but
it's less clear that that's correct - but execTuples.c wouldn't be the
right place.
Author: Ashutosh Bapat.
Discussion: https://postgr.es/m/20180220224318.gw4oe5jadhpmcdnm@alap3.anarazel.de
ProcessUtility can recurse, and indeed can be driven to infinite
recursion, so it ought to have a check_stack_depth() call. This
covers the reported bug (portal trying to execute itself) and a bunch
of other cases that could perhaps arise somewhere.
Per bug #15428 from Malthe Borch. Back-patch to all supported branches.
Discussion: https://postgr.es/m/15428-b3c2915ec470b033@postgresql.org
When an error occurs during a benchmark run, exit with a nonzero exit
code and write a message at the end. Previously, it would just print
the error message when it happened but then proceed to print the run
summary normally and exit with status 0. To still allow
distinguishing setup from run-time errors, we use exit status 2 for
the new state, whereas existing errors during pgbench initialization
use exit status 1.
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
With the PostgreSQL 11 release notes acknowledgments list, FOP reported
WARNING: Glyph "?" (0x144, nacute) not available in font "Times-Roman".
WARNING: Glyph "?" (0x15e, Scedilla) not available in font "Times-Roman".
WARNING: Glyph "?" (0x15f, scedilla) not available in font "Times-Roman".
WARNING: Glyph "?" (0x131, dotlessi) not available in font "Times-Roman".
This is because we have some new contributors whose names use letters
that we haven't used before, and apparently FOP can't handle them out
of the box.
For now, just fix this by "unaccenting" those names. In the future,
maybe this can be fixed better with a different font configuration.
There is also another warning
WARNING: Glyph "?" (0x3c0, pi) not available in font "Times-Roman".
but that existed in previous releases and is not touched here.
These test cases could be adversely affected by an upcoming change
to allow pullup of FROM-less subqueries. Tweak them to ensure that
they'll continue to test what they did before.
Discussion: https://postgr.es/m/5395.1539275668@sss.pgh.pa.us
This prevents failures in cases where we pull up a constant or var-free
expression from a subquery and put it into a full join's qual. That can
result in not recognizing the qual as containing a mergejoin-able or
hashjoin-able condition. A PHV prevents the problem because it is still
recognized as belonging to the side of the join the subquery is in.
I'm not very sure about the net effect of this change on plan quality.
In "typical" cases where the join keys are Vars, nothing changes.
In an affected case, the PHV-wrapped expression is less likely to be seen
as equal to PHV-less instances below the join, but more likely to be seen
as equal to similar expressions above the join, so it may end up being a
wash. In the one existing case where there's any visible change in a
regression-test plan, it amounts to referencing a lower computation of a
COALESCE result instead of recomputing it, which seems like a win.
Given my uncertainty about that and the lack of field complaints,
no back-patch, even though this is a very ancient problem.
Discussion: https://postgr.es/m/32090.1539378124@sss.pgh.pa.us
With the removal of the old abstime type, there are no longer any cases
in this test where we need to use the weaker castcontext-ignoring form
of binary coercibility check. (The other major source of such headaches,
apparently-incompatible hash functions, is now hashvalidate()'s problem
not this test script's problem.) Hence, just use binary_coercible()
everywhere, and remove the comments explaining why we don't do so ---
which were broken anyway by cda6a8d01.
I left physically_coercible() in place but renamed it to better
match what it's actually testing, and added some comments.
Also, in test queries that have an assumption about the maximum number
of function arguments they need to handle, add a clause to make them fail
if someday there's a relevant function with more arguments. Otherwise
we're likely not to notice that we need to extend the queries.
Discussion: https://postgr.es/m/27637.1539388060@sss.pgh.pa.us
