This never worked, I think. Per report from Marc Munro.
In passing, fix funny spacing in the COMMENT ON command as a result of
excess space in the "label" string.
A oversight in 2c0a485896 causes 'could not create archive status file
"...": No such file or directory' errors in pg_receivexlog if the
target directory doesn't happen to contain a archive_status
directory. That's due to a stupidly left over 'true' constant instead
of mark_done being passed down to ProcessXLogDataMsg().
The bug is only present in the master branch, and luckily wasn't
released.
Spotted by Fujii Masao.
Commit 0e5680f473 contained a thinko
mixing LOCKMODE with LockTupleMode. This caused misbehavior in the case
where a tuple is marked with a multixact with at most a FOR SHARE lock,
and another transaction tries to acquire a FOR NO KEY EXCLUSIVE lock;
this case should block but doesn't.
Include a new isolation tester spec file to explicitely try all the
tuple lock combinations; without the fix it shows the problem:
starting permutation: s1_begin s1_lcksvpt s1_tuplock2 s2_tuplock3 s1_commit
step s1_begin: BEGIN;
step s1_lcksvpt: SELECT * FROM multixact_conflict FOR KEY SHARE; SAVEPOINT foo;
a
1
step s1_tuplock2: SELECT * FROM multixact_conflict FOR SHARE;
a
1
step s2_tuplock3: SELECT * FROM multixact_conflict FOR NO KEY UPDATE;
a
1
step s1_commit: COMMIT;
With the fixed code, step s2_tuplock3 blocks until session 1 commits,
which is the correct behavior.
All other cases behave correctly.
Backpatch to 9.3, like the commit that introduced the problem.
These calls are pretty much guaranteed not to fail unless something
has gone horribly wrong, and even in that case we'd just error out a
short time later. But since several code checkers complain about the
missing check it seems worthwile to fix it nonetheless.
Pointed out by Coverity.
Previously the computation of the total test duration, measured in
microseconds, accidentally overflowed due to accidentally using signed
32bit arithmetic. As the only consequence is that pg_test_timing
invocations with such, overly large, durations never finished the
practical consequences of this bug are minor.
Pointed out by Coverity.
Backpatch to 9.2 where pg_test_timing was added.
In the unlikely case of stdin (fd 0) being closed, the off-by-one
would lead to pg_xlogdump failing to open files.
Spotted by Coverity.
Backpatch to 9.3 where pg_xlogdump was introduced.
As every error in mark_file_as_archived() will lead to a failure of
pg_basebackup the FD leak couldn't ever lead to a real problem. It
seems better to fix the leak anyway though, rather than silence
Coverity, as the usage of the function might get extended or copied at
some point in the future.
Pointed out by Coverity.
Backpatch to 9.2, like the relevant part of the previous patch.
WAL (and timeline history) files created by pg_basebackup did not
maintain the new base backup's archive status. That's currently not a
problem if the new node is used as a standby - but if that node is
promoted all still existing files can get archived again. With a high
wal_keep_segment settings that can happen a significant time later -
which is quite confusing.
Change both the backend (for the -x/-X fetch case) and pg_basebackup
(for -X stream) itself to always mark WAL/timeline files included in
the base backup as .done. That's in line with walreceiver.c doing so.
The verbosity of the pg_basebackup changes show pretty clearly that it
needs some refactoring, but that'd result in not be backpatchable
changes.
Backpatch to 9.1 where pg_basebackup was introduced.
Discussion: 20141205002854.GE21964@awork2.anarazel.de
Backpatch to 9.3 where src/common was introduce, because a bugfix that
needs to be backpatched, requires the function. Earlier branches will
have to duplicate the code.
At one point in the development of this feature, it was claimed that
allowing negative values would be useful to compensate for timezone
differences between master and slave servers. That was based on a mistaken
assumption that commit timestamps are recorded in local time; but of course
they're in UTC. Nor is a negative apply delay likely to be a sane way of
coping with server clock skew. However, the committed patch still treated
negative delays as doing something, and the timezone misapprehension
survived in the user documentation as well.
If recovery_min_apply_delay were a proper GUC we'd just set the minimum
allowed value to be zero; but for the moment it seems better to treat
negative settings as if they were zero.
In passing do some extra wordsmithing on the parameter's documentation,
including correcting a second misstatement that the parameter affects
processing of Restore Point records.
Issue noted by Michael Paquier, who also provided the code patch; doc
changes by me. Back-patch to 9.4 where the feature was introduced.
The short-lived event trigger in the rowsecurity test causes irreproducible
failures when the concurrent tests do something that the event trigger
can't cope with. Per buildfarm.
Use the phraseology "ISO 8601 week-numbering year" in place of just
"ISO year", and make related adjustments to other terminology.
The point of this change is that it seems some people see "ISO year"
and think "standard year", whereupon they're surprised when constructs
like to_char(..., "IYYY-MM-DD") produce nonsensical results. Perhaps
hanging a few more adjectives on it will discourage them from jumping
to false conclusions. I put in an explicit warning against that
specific usage, too, though the main point is to discourage people
who haven't read this far down the page.
In passing fix some nearby markup and terminology inconsistencies.
This might help us debug what's happening on some buildfarm members.
In passing, reduce the message from ereport to elog --- it doesn't seem
like this should be a user-facing case, so not worth translating.
For simple boolean variables such as ON_ERROR_STOP, psql has for a long
time recognized variant spellings of "on" and "off" (such as "1"/"0"),
and it also made a point of warning you if you'd misspelled the setting.
But these conveniences did not exist for other keyword-valued variables.
In particular, though ECHO_HIDDEN and ON_ERROR_ROLLBACK include "on" and
"off" as possible values, none of the alternative spellings for those were
recognized; and to make matters worse the code would just silently assume
"on" was meant for any unrecognized spelling. Several people have reported
getting bitten by this, so let's fix it. In detail, this patch:
* Allows all spellings recognized by ParseVariableBool() for ECHO_HIDDEN
and ON_ERROR_ROLLBACK.
* Reports a warning for unrecognized values for COMP_KEYWORD_CASE, ECHO,
ECHO_HIDDEN, HISTCONTROL, ON_ERROR_ROLLBACK, and VERBOSITY.
* Recognizes all values for all these variables case-insensitively;
previously there was a mishmash of case-sensitive and case-insensitive
behaviors.
Back-patch to all supported branches. There is a small risk of breaking
existing scripts that were accidentally failing to malfunction; but the
consensus is that the chance of detecting real problems and preventing
future mistakes outweighs this.
The one for the OCLASS_COLLATION case was noticed by
CLOBBER_CACHE_ALWAYS buildfarm members; the others I spotted by manual
code inspection.
Also remove a redundant check.
These columns can be passed to pg_get_object_address() and used to
reconstruct the dropped objects identities in a remote server containing
similar objects, so that the drop can be replicated.
Reviewed by Stephen Frost, Heikki Linnakangas, Abhijit Menon-Sen, Andres
Freund.
This function returns object type and objname/objargs arrays, which can
be passed to pg_get_object_address. This is especially useful because
the textual representation can be copied to a remote server in order to
obtain the corresponding OID-based address. In essence, this function
is the inverse of recently added pg_get_object_address().
Catalog version bumped due to the addition of the new function.
Also add docs to pg_get_object_address.
In COMMENT, DROP, SECURITY LABEL, and the new pg_get_object_address
function, we were representing types as a list of names, same as other
objects; but types are special objects that require their own
representation to be totally accurate. In the original COMMENT code we
had a note about fixing it which was lost in the course of c10575ff00.
Change all those places to use TypeName instead, as suggested by that
comment.
Right now the original coding doesn't cause any bugs, so no backpatch.
It is more problematic for proposed future code that operate with object
addresses from the SQL interface; type details such as array-ness are
lost when working with the degraded representation.
Thanks to Petr Jelínek and Dimitri Fontaine for offlist help on finding
a solution to a shift/reduce grammar conflict.
Commit 36a35c55 changed the divisor from 3 to 6, for no apparent reason.
Reducing GinMaxItemSize like that created a dump/reload hazard: loading a
9.3 database to 9.4 might fail with "index row size XXX exceeds maximum 1352
for index ..." error. Revert the change.
While we're at it, make the calculation slightly more accurate. It used to
divide the available space on page by three, then subtract
sizeof(ItemIdData), and finally round down. That's not totally accurate; the
item pointers for the three items are packed tight right after the page
header, but there is alignment padding after the item pointers. Change the
calculation to reflect that, like BTMaxItemSize does. I tested this with
different block sizes on systems with 4- and 8-byte alignment, and the value
after the final MAXALIGN_DOWN was the same with both methods on all
configurations. So this does not make any difference currently, but let's be
tidy.
Also add a comment explaining what the macro does.
This fixes bug #12292 reported by Robert Thaler. Backpatch to 9.4, where the
bug was introduced.
Document the long forms of \H \i \ir \o \p \r \w ... apparently, we have
a long and dishonorable history of leaving out the unabbreviated names of
psql backslash commands.
Avoid saying "Unix shell"; we can just say "shell" with equal clarity,
and not leave Windows users wondering whether the feature works for them.
Improve consistency of documentation of \g \o \w metacommands. There's
no reason to use slightly different wording or markup for each one.
It is causing trouble when run in parallel mode, because dropping the
function other sessions are running concurrently causes them to fail due
to inability to find the function.
Per buildfarm, as noted by Tom Lane.
We were trying to acquire the lock even when we were subsequently
not sleeping in some other transaction, which opens us up unnecessarily
to deadlocks. In particular, this is troublesome if an update tries to
lock an updated version of a tuple and finds itself doing EvalPlanQual
update chain walking; more than two sessions doing this concurrently
will find themselves sleeping on each other because the HW tuple lock
acquisition in heap_lock_tuple called from EvalPlanQualFetch races with
the same tuple lock being acquired in heap_update -- one of these
sessions sleeps on the other one to finish while holding the tuple lock,
and the other one sleeps on the tuple lock.
Per trouble report from Andrew Sackville-West in
http://www.postgresql.org/message-id/20140731233051.GN17765@andrew-ThinkPad-X230
His scenario can be simplified down to a relatively simple
isolationtester spec file which I don't include in this commit; the
reason is that the current isolationtester is not able to deal with more
than one blocked session concurrently and it blocks instead of raising
the expected deadlock. In the future, if we improve isolationtester, it
would be good to include the spec file in the isolation schedule. I
posted it in
http://www.postgresql.org/message-id/20141212205254.GC1768@alvh.no-ip.org
Hat tip to Mark Kirkwood, who helped diagnose the trouble.
Windows versions later than Windows Server 2003 map "localhost" to ::1.
Account for that in the generated pg_hba.conf, fixing another oversight
in commit f6dc6dd5ba. Back-patch to 9.0,
like that commit.
David Rowley and Noah Misch
This reverts commit 60838df922.
That change needs a bit more thought to be workable. In view of
the potentially machine-dependent stuff that went in today,
we need all of the buildfarm to be testing those other changes.
StrategyGetBuffer() has proven to be a bottleneck in a number of
buffer acquisition heavy workloads. To some degree this has already
been alleviated by 5d7962c6, but it still can be quite a heavy
bottleneck. The problem is that in unfortunate usage patterns a
single StrategyGetBuffer() call will have to look at a large number of
buffers - in turn making it likely that the process will be put to
sleep while still holding the spinlock.
Replace most of the usage of the buffer_strategy_lock spinlock for the
clock sweep by a atomic nextVictimBuffer variable. That variable,
modulo NBuffers, is the current hand of the clock sweep. The buffer
clock-sweep then only needs to acquire the spinlock after a
wraparound. And even then only in the process that did the wrapping
around. That alleviates nearly all the contention on the relevant
spinlock, although significant contention on the cacheline can still
exist.
Reviewed-By: Robert Haas and Amit Kapila
Discussion: 20141010160020.GG6670@alap3.anarazel.de,
20141027133218.GA2639@awork2.anarazel.de
The old LWLock implementation had the problem that concurrent lock
acquisitions required exclusively acquiring a spinlock. Often that
could lead to acquirers waiting behind the spinlock, even if the
actual LWLock was free.
The new implementation doesn't acquire the spinlock when acquiring the
lock itself. Instead the new atomic operations are used to atomically
manipulate the state. Only the waitqueue, used solely in the slow
path, is still protected by the spinlock. Check lwlock.c's header for
an explanation about the used algorithm.
For some common workloads on larger machines this can yield
significant performance improvements. Particularly in read mostly
workloads.
Reviewed-By: Amit Kapila and Robert Haas
Author: Andres Freund
Discussion: 20130926225545.GB26663@awork2.anarazel.de
Besides being shorter and much easier to read it changes the logic in
LWLockRelease() to release all shared lockers when waking up any. This
can yield some significant performance improvements - and the fairness
isn't really much worse than before, as we always allowed new shared
lockers to jump the queue.
Hiding context messages usually is not a good idea - except for rather
verbose debugging/development utensils like LOG_DEBUG. There the
amount of repeated context messages just bloat the log without adding
information.
Exposing compression and decompression APIs of pglz makes possible its
use by extensions and contrib modules. pglz_decompress contained a call
to elog to emit an error message in case of corrupted data. This function
is changed to return a status code to let its callers return an error instead.
This commit is required for upcoming WAL compression feature so that
the WAL reader facility can decompress the WAL data by using pglz_decompress.
Michael Paquier
For some reason this seems to have been missed when the lists in
src/timezone/tznames/ were first constructed. We can't put it in Default
because of the conflict with US CST, but we should certainly list it among
the alternative entries in Asia.txt. (I checked for other oversights, but
all the other abbreviations that are in current use according to the IANA
files seem to be accounted for.) Noted while responding to bug #12326.
This reverts commit 1826987a46.
The overall design was deemed unacceptable, in discussion following the
previous commit message; we might find some parts of it still
salvageable, but I don't want to be on the hook for fixing it, so let's
wait until we have a new patch.
This allows access to get_object_address from SQL, which is useful to
obtain OID addressing information from data equivalent to that emitted
by the parser. This is necessary infrastructure of a project to let
replication systems propagate object dropping events to remote servers,
where the schema might be different than the server originating the
DROP.
This patch also adds support for OBJECT_DEFAULT to get_object_address;
that is, it is now possible to refer to a column's default value.
Catalog version bumped due to the new function.
Reviewed by Stephen Frost, Heikki Linnakangas, Robert Haas, Andres
Freund, Abhijit Menon-Sen, Adam Brightwell.
