Certain short salts crashed the backend or disclosed a few bytes of
backend memory. For existing salt-induced error conditions, emit a
message saying as much. Back-patch to 9.0 (all supported versions).
Josh Kupershmidt
Security: CVE-2015-5288
If we can't read the query texts file (whether because out-of-memory, or
for some other reason), give up and reset the file to empty, discarding all
stored query texts, though not the statistics per se. We used to leave
things alone and hope for better luck next time, but the problem is that
the file is only going to get bigger and even harder to slurp into memory.
Better to do something that will get us out of trouble.
Likewise reset the file to empty for any other failure within gc_qtexts().
The previous behavior after a write error was to discard query texts but
not do anything to truncate the file, which is just weird.
Also, increase the maximum supported file size from MaxAllocSize to
MaxAllocHugeSize; this makes it more likely we'll be able to do a garbage
collection successfully.
Also, fix recalculation of mean_query_len within entry_dealloc() to match
the calculation in gc_qtexts(). The previous coding overlooked the
possibility of dropped texts (query_len == -1) and would underestimate the
mean of the remaining entries in such cases, thus possibly causing excess
garbage collection cycles.
In passing, add some errdetail to the log entry that complains about
insufficient memory to read the query texts file, which after all was
Jim Nasby's original complaint.
Back-patch to 9.4 where the current handling of query texts was
introduced.
Peter Geoghegan, rather editorialized upon by me
Without CASCADE, if an extension has an unfullfilled dependency on
another extension, CREATE EXTENSION ERRORs out with "required extension
... is not installed". That is annoying, especially when that dependency
is an implementation detail of the extension, rather than something the
extension's user can make sense of.
In addition to CASCADE this also includes a small set of regression
tests around CREATE EXTENSION.
Author: Petr Jelinek, editorialized by Michael Paquier, Andres Freund
Reviewed-By: Michael Paquier, Andres Freund, Jeff Janes
Discussion: 557E0520.3040800@2ndquadrant.com
The existing hint talked about "may only contain letters", but the
actual requirement is more strict: only lower case letters are allowed.
Reported-By: Rushabh Lathia
Author: Rushabh Lathia
Discussion: AGPqQf2x50qcwbYOBKzb4x75sO_V3g81ZsA8+Ji9iN5t_khFhQ@mail.gmail.com
Backpatch: 9.4-, where replication slots were added
If we have a local Var of say varchar type with default collation, and
we apply a RelabelType to convert that to text with default collation, we
don't want to consider that as creating an FDW_COLLATE_UNSAFE situation.
It should be okay to compare that to a remote Var, so long as the remote
Var determines the comparison collation. (When we actually ship such an
expression to the remote side, the local Var would become a Param with
default collation, meaning the remote Var would in fact control the
comparison collation, because non-default implicit collation overrides
default implicit collation in parse_collate.c.) To fix, be more precise
about what FDW_COLLATE_NONE means: it applies either to a noncollatable
data type or to a collatable type with default collation, if that collation
can't be traced to a remote Var. (When it can, FDW_COLLATE_SAFE is
appropriate.) We were essentially using that interpretation already at
the Var/Const/Param level, but we weren't bubbling it up properly.
An alternative fix would be to introduce a separate FDW_COLLATE_DEFAULT
value to describe the second situation, but that would add more code
without changing the actual behavior, so it didn't seem worthwhile.
Also, since we're clarifying the rule to be that we care about whether
operator/function input collations match, there seems no need to fail
immediately upon seeing a Const/Param/non-foreign-Var with nondefault
collation. We only have to reject if it appears in a collation-sensitive
context (for example, "var IS NOT NULL" is perfectly safe from a collation
standpoint, whatever collation the var has). So just set the state to
UNSAFE rather than failing immediately.
Per report from Jeevan Chalke. This essentially corrects some sloppy
thinking in commit ed3ddf918b, so back-patch
to 9.3 where that logic appeared.
A bunch of tests missed specifying that empty transactions shouldn't be
displayed. That causes problems when e.g. autovacuum runs in an
unfortunate moment. The tests in question only run for a very short
time, making this quite unlikely.
Reported-By: Buildfarm member axolotl
Backpatch: 9.4, where logical decoding was introduced
This new function provides information about SSL extensions present in
the X509 certificate used for the current connection.
Extension version updated to version 1.1.
Author: Дмитрий Воронин (Dmitry Voronin)
Reviewed by: Michael Paquier, Heikki Linnakangas, Álvaro Herrera
We were missing a few return checks on OpenSSL calls. Should be pretty
harmless, since we haven't seen any user reports about problems, and
this is not a high-traffic module anyway; still, a bug is a bug, so
backpatch this all the way back to 9.0.
Author: Michael Paquier, while reviewing another sslinfo patch
Recent commit 0426f349e changed handling of error context reports
in such a way to have a minor effect on the sepgsql regression
output. Adapt the expected output file to suit. Since that commit
was HEAD only, so is this one.
Remove the code in plpgsql that suppressed the innermost line of CONTEXT
for messages emitted by RAISE commands. That was never more than a quick
backwards-compatibility hack, and it's pretty silly in cases where the
RAISE is nested in several levels of function. What's more, it violated
our design theory that verbosity of error reports should be controlled
on the client side not the server side.
To alleviate the resulting noise increase, introduce a feature in libpq
and psql whereby the CONTEXT field of messages can be suppressed, either
always or only for non-error messages. Printing CONTEXT for errors only
is now their default behavior.
The actual code changes here are pretty small, but the effects on the
regression test outputs are widespread. I had to edit some of the
alternative expected outputs by hand; hopefully the buildfarm will soon
find anything I fat-fingered.
In passing, fix up (again) the output line counts in psql's various
help displays. Add some commentary about how to verify them.
Pavel Stehule, reviewed by Petr Jelínek, Jeevan Chalke, and others
Add Python script for buiding unaccent.rules from Unicode data. Don't
backpatch because unaccent changes may require tsvector/index
rebuild.
Thomas Munro <thomas.munro@enterprisedb.com>
The regression tests for sepgsql were broken by changes in the
base distro as-shipped policies. Specifically, definition of
unconfined_t in the system default policy was changed to bypass
multi-category rules, which the regression test depended on.
Fix that by defining a custom privileged domain
(sepgsql_regtest_superuser_t) and using it instead of system's
unconfined_t domain. The new sepgsql_regtest_superuser_t domain
performs almost like the current unconfined_t, but restricted by
multi-category policy as the traditional unconfined_t was.
The custom policy module is a self defined domain, and so should not
be affected by related future system policy changes. However, it still
uses the unconfined_u:unconfined_r pair for selinux-user and role.
Those definitions have not been changed for several years and seem
less risky to rely on than the unconfined_t domain. Additionally, if
we define custom user/role, they would need to be manually defined
at the operating system level, adding more complexity to an already
non-standard and complex regression test.
Back-patch to 9.3. The regression tests will need more work before
working correctly on 9.2. Starting with 9.2, sepgsql has had dependencies
on libselinux versions that are only available on newer distros with
the changed set of policies (e.g. RHEL 7.x). On 9.1 sepgsql works
fine with the older distros with original policy set (e.g. RHEL 6.x),
and on which the existing regression tests work fine. We might want
eventually change 9.1 sepgsql regression tests to be more independent
from the underlying OS policies, however more work will be needed to
make that happen and it is not clear that it is worth the effort.
Kohei KaiGai with review by Adam Brightwell and me, commentary by
Stephen, Alvaro, Tom, Robert, and others.
This fixes a bunch of somewhat pedantic warnings with new
compilers. Since by far the majority of other functions definitions use
the (void) style it just seems to be consistent to do so as well in the
remaining few places.
Commit 43b4a16817 made the isolation
tester reject duplicate step names, and it turns out that the
test_decoding module's concurrent_ddl_dml isolation test has a
duplicate name. I think the second definition isn't actually getting
used, so just remove it.
Per buildfarm.
This function was using the single-value-per-call mechanism, but the
code relied on a relcache entry that wasn't kept open across calls.
This manifested as weird errors in buildfarm during the short time that
the "brin-1" isolation test lived.
Backpatch to 9.5, where it was introduced.
There's no reason not to expose both restart_lsn and confirmed_flush
since they have rather distinct meanings. The former is the oldest WAL
still required and valid for both physical and logical slots, whereas
the latter is the location up to which a logical slot's consumer has
confirmed receiving data. Most of the time a slot will require older
WAL (i.e. restart_lsn) than the confirmed
position (i.e. confirmed_flush_lsn).
Author: Marko Tiikkaja, editorialized by me
Discussion: 559D110B.1020109@joh.to
It's against project policy to use elog() for user-facing errors, or to
omit an errcode() selection for errors that aren't supposed to be "can't
happen" cases. Fix all the violations of this policy that result in
ERRCODE_INTERNAL_ERROR log entries during the standard regression tests,
as errors that can reliably be triggered from SQL surely should be
considered user-facing.
I also looked through all the files touched by this commit and fixed
other nearby problems of the same ilk. I do not claim to have fixed
all violations of the policy, just the ones in these files.
In a few places I also changed existing ERRCODE choices that didn't
seem particularly appropriate; mainly replacing ERRCODE_SYNTAX_ERROR
by something more specific.
Back-patch to 9.5, but no further; changing ERRCODE assignments in
stable branches doesn't seem like a good idea.
An EAN beginning with 979 (but not 9790 - those are ISMN's) are accepted
as ISBN numbers, but they cannot be represented in the old, 10-digit ISBN
format. They must be output in the new 13-digit ISBN-13 format. We printed
out an incorrect value for those.
Also add a regression test, to test this and some other basic functionality
of the module.
Patch by Fabien Coelho. This fixes bug #13442, reported by B.Z. Backpatch
to 9.1, where we started to recognize ISBN-13 numbers.
The original implementation of TABLESAMPLE modeled the tablesample method
API on index access methods, which wasn't a good choice because, without
specialized DDL commands, there's no way to build an extension that can
implement a TSM. (Raw inserts into system catalogs are not an acceptable
thing to do, because we can't undo them during DROP EXTENSION, nor will
pg_upgrade behave sanely.) Instead adopt an API more like procedural
language handlers or foreign data wrappers, wherein the only SQL-level
support object needed is a single handler function identified by having
a special return type. This lets us get rid of the supporting catalog
altogether, so that no custom DDL support is needed for the feature.
Adjust the API so that it can support non-constant tablesample arguments
(the original coding assumed we could evaluate the argument expressions at
ExecInitSampleScan time, which is undesirable even if it weren't outright
unsafe), and discourage sampling methods from looking at invisible tuples.
Make sure that the BERNOULLI and SYSTEM methods are genuinely repeatable
within and across queries, as required by the SQL standard, and deal more
honestly with methods that can't support that requirement.
Make a full code-review pass over the tablesample additions, and fix
assorted bugs, omissions, infelicities, and cosmetic issues (such as
failure to put the added code stanzas in a consistent ordering).
Improve EXPLAIN's output of tablesample plans, too.
Back-patch to 9.5 so that we don't have to support the original API
in production.
The result closely resembles linking of these modules for the "win32"
port. Augment the $(exports_file) header so the file is also usable as
an import file. Unfortunately, relocating an AIX installation will now
require adding $(pkglibdir) to LD_LIBRARY_PATH. Back-patch to 9.5,
where the modules were introduced.
The AIX 7.1 libm is static, and AIX postgres executables do not export
symbols acquired from libraries. Back-patch to 9.5, where commit
cfe12763c3 added a sqrt() call.
This allows convenient checking for existence of a GUC from SQL, which is
particularly useful when dealing with custom variables.
David Christensen, reviewed by Jeevan Chalke
Patch by David Rowley. Backpatch to 9.5, as some of the calls were new in
9.5, and keeping the code in sync with master makes future backpatching
easier.
Commit 179cdd09 added macros to check if a filename is a WAL segment
or other such file. However there were still some instances of the
strlen + strspn combination to check for that in WAL-related utilities
like pg_archivecleanup. Those checks can be replaced with the macros.
This patch makes use of the macros in those utilities and
which would make the code a bit easier to read.
Back-patch to 9.5.
Michael Paquier
test_decoding used fastgetattr() to extract column values. That's wrong
when decoding updates and deletes if a table's replica identity is set
to FULL and new columns have been added since the old version of the
tuple was created. Due to the lack of a crosscheck with the datum's
natts values an invalid value will be output, leading to errors or
worse.
Bug: #13470
Reported-By: Krzysztof Kotlarski
Discussion: 20150626100333.3874.90852@wrigleys.postgresql.org
Backpatch to 9.4, where the feature, including the bug, was added.
Newer Python versions randomize the hash seed for dictionaries,
resulting in a random output order, which messes up the regression test
diffs.
Instead, use Python assert to compare the dictionaries with their
expected value.
Fix some places where pgindent did silly stuff, often because project
style wasn't followed to begin with. (I've not touched the atomics
headers, though.)
Remove a bunch of "extern Datum foo(PG_FUNCTION_ARGS);" declarations that
are no longer needed now that PG_FUNCTION_INFO_V1(foo) provides that.
Some of these were evidently missed in commit e7128e8dbb, but others
were cargo-culted in in code added since then. Possibly that can be blamed
in part on the fact that we'd not fixed relevant documentation examples,
which I've now done.
Use "a" and "an" correctly, mostly in comments. Two error messages were
also fixed (they were just elogs, so no translation work required). Two
function comments in pg_proc.h were also fixed. Etsuro Fujita reported one
of these, but I found a lot more with grep.
Also fix a few other typos spotted while grepping for the a/an typos.
For example, "consists out of ..." -> "consists of ...". Plus a "though"/
"through" mixup reported by Euler Taveira.
Many of these typos were in old code, which would be nice to backpatch to
make future backpatching easier. But much of the code was new, and I didn't
feel like crafting separate patches for each branch. So no backpatching.
Defer lookup of opfamily and input type of a of a user specified opclass
until the optimizer selects among available unique indexes; and store
the opclass in the parse analyzed tree instead. The primary reason for
doing this is that for rule deparsing it's easier to use the opclass
than the previous representation.
While at it also rename a variable in the inference code to better fit
it's purpose.
This is separate from the actual fixes for deparsing to make review
easier.
The plain C string language name needs to be wrapped in makeString() so
that the parse tree is copyable. This is detectable by
-DCOPY_PARSE_PLAN_TREES. Add a test case for the COMMENT case.
Also make the quoting in the error messages more consistent.
discovered by Tom Lane
This has been the predominant outcome. When the output of decrypting
with a wrong key coincidentally resembled an OpenPGP packet header,
pgcrypto could instead report "Corrupt data", "Not text data" or
"Unsupported compression algorithm". The distinct "Corrupt data"
message added no value. The latter two error messages misled when the
decrypted payload also exhibited fundamental integrity problems. Worse,
error message variance in other systems has enabled cryptologic attacks;
see RFC 4880 section "14. Security Considerations". Whether these
pgcrypto behaviors are likewise exploitable is unknown.
In passing, document that pgcrypto does not resist side-channel attacks.
Back-patch to 9.0 (all supported versions).
Security: CVE-2015-3167
The previous coding in hstore_plpython and ltree_plpython wiped out any
values set by the base makefiles. This at least had the effect of running
the tests in "regression" not "contrib_regression" as expected. These
being pretty new modules, there might be other bad effects we'd not
noticed yet.
