Fix a longstanding thinko in replay of NEXTOID and checkpoint records: we
tried to advance nextOid only if it was behind the value in the WAL record,
but the comparison would draw the wrong conclusion if OID wraparound had
occurred since the previous value. Better to just unconditionally assign
the new value, since OID assignment shouldn't be happening during replay
anyway.
The consequences of a failure to update nextOid would be pretty minimal,
since we have long had the code set up to obtain another OID and try again
if the generated value is already in use. But in the worst case there
could be significant performance glitches while such loops iterate through
many already-used OIDs before finding a free one.
The odds of a wraparound happening during WAL replay would be small in a
crash-recovery scenario, and the length of any ensuing OID-assignment stall
quite limited anyway. But neither of these statements hold true for a
replication slave that follows a WAL stream for a long period; its behavior
upon going live could be almost unboundedly bad. Hence it seems worth
back-patching this fix into all supported branches.
Already fixed in HEAD in commit c6d76d7c82.
When default_text_search_config, default_tablespace, or temp_tablespaces
setting is set per-user or per-database, with an "ALTER USER/DATABASE SET
..." statement, don't throw an error if the text search configuration or
tablespace does not exist. In case of text search configuration, even if
it doesn't exist in the current database, it might exist in another
database, where the setting is intended to have its effect. This behavior
is now the same as search_path's.
Tablespaces are cluster-wide, so the same argument doesn't hold for
tablespaces, but there's a problem with pg_dumpall: it dumps "ALTER USER
SET ..." statements before the "CREATE TABLESPACE" statements. Arguably
that's pg_dumpall's fault - it should dump the statements in such an order
that the tablespace is created first and then the "ALTER USER SET
default_tablespace ..." statements after that - but it seems better to be
consistent with search_path and default_text_search_config anyway. Besides,
you could still create a dump that throws an error, by creating the
tablespace, running "ALTER USER SET default_tablespace", then dropping the
tablespace and running pg_dumpall on that.
Backpatch to all supported versions.
Due to oversights, the encrypt_iv() and decrypt_iv() functions failed to
report certain types of invalid-input errors, and would instead return
random garbage values.
Marko Kreen, per report from Stefan Kaltenbrunner
The original coding examined the next character before verifying that
there *is* a next character. In the worst case with the input buffer
right up against the end of memory, this would result in a segfault.
Problem spotted by Paul Guyot; this commit extends his patch to fix an
additional case. In addition, make the code a tad more readable by not
overloading the usage of *tlen.
Historically we've used the SWPB instruction for TAS() on ARM, but this
is deprecated and not available on ARMv6 and later. Instead, make use
of a GCC builtin if available. We'll still fall back to SWPB if not,
so as not to break existing ports using older GCC versions.
Eventually we might want to try using __sync_lock_test_and_set() on some
other architectures too, but for now that seems to present only risk and
not reward.
Back-patch to all supported versions, since people might want to use any
of them on more recent ARM chips.
Martin Pitt
In commit 6545a901aa, I removed the mini SQL
lexer that was in pg_backup_db.c, thinking that it had no real purpose
beyond separating COPY data from SQL commands, which purpose had been
obsoleted by long-ago fixes in pg_dump's archive file format.
Unfortunately this was in error: that code was also used to identify
command boundaries in INSERT-style table data, which is run together as a
single string in the archive file for better compressibility. As a result,
direct-to-database restores from archive files made with --inserts or
--column-inserts fail in our latest releases, as reported by Dick Visser.
To fix, restore the mini SQL lexer, but simplify it by adjusting the
calling logic so that it's only required to cope with INSERT-style table
data, not arbitrary SQL commands. This allows us to not have to deal with
SQL comments, E'' strings, or dollar-quoted strings, none of which have
ever been emitted by dumpTableData_insert.
Also, fix the lexer to cope with standard-conforming strings, which was the
actual bug that the previous patch was meant to solve.
Back-patch to all supported branches. The previous patch went back to 8.2,
which unfortunately means that the EOL release of 8.2 contains this bug,
but I don't think we're doing another 8.2 release just because of that.
Suggested solution from Tom Lane. Problem discovered, probably not
for the first time, while testing the mingw-w64 32 bit compiler.
Backpatched to all live branches.
I forgot to change the functions to use the PG_GETARG_INET_PP() macro,
when I changed DatumGetInetP() to unpack the datum, like Datum*P macros
usually do. Also, I screwed up the definition of the PG_GETARG_INET_PP()
macro, and didn't notice because it wasn't used.
This fixes the memory leak when sorting inet values, as reported
by Jochen Erwied and debugged by Andres Freund. Backpatch to 8.3, like
the previous patch that broke it.
On a platform that isn't supplying __FILE__, previous coding would either
crash or give a stale result for the filename string. Not sure how likely
that is, but the original code catered for it, so let's keep doing so.
In vpath builds, the __FILE__ macro that is used in verbose error
reports contains the full absolute file name, which makes the error
messages excessively verbose. So keep only the base name, thus
matching the behavior of non-vpath builds.
When the system is idle for awhile after activity, the "smoothed_alloc"
state variable in BgBufferSync converges slowly to zero. With standard
IEEE float arithmetic this results in several iterations with denormalized
values, which causes kernel traps and annoying log messages on some
poorly-designed platforms. There's no real need to track such small values
of smoothed_alloc, so we can prevent the kernel traps by forcing it to zero
as soon as it's too small to be interesting for our purposes. This issue
is purely cosmetic, since the iterations don't happen fast enough for the
kernel traps to pose any meaningful performance problem, but still it seems
worth shutting up the log messages.
The kernel log messages were previously reported by a number of people,
but kudos to Greg Matthews for tracking down exactly where they were coming
from.
This can change the meaning of queries, if the blank line happens to
occur in the middle of a quoted literal, as per complaint from Tomas Vondra.
Back-patch to all supported branches.
a new macro, DatumGetInetPP(), that does not. This brings these macros
in line with other DatumGet*P() macros.
Backpatch to 8.3, where 1-byte header varlenas were introduced.
This assumption can be wrong when the toaster is passed a raw on-disk
tuple, because the tuple might pre-date an ALTER TABLE ADD COLUMN operation
that added columns without rewriting the table. In such a case the tuple's
natts value is smaller than what we expect from the tuple descriptor, and
so its t_hoff value could be smaller too. In fact, the tuple might not
have a null bitmap at all, and yet our current opinion of it is that it
contains some trailing nulls.
In such a situation, toast_insert_or_update did the wrong thing, because
to save a few lines of code it would use the old t_hoff value as the offset
where heap_fill_tuple should start filling data. This did not leave enough
room for the new nulls bitmap, with the result that the first few bytes of
data could be overwritten with null flag bits, as in a recent report from
Hubert Depesz Lubaczewski.
The particular case reported requires ALTER TABLE ADD COLUMN followed by
CREATE TABLE AS SELECT * FROM ... or INSERT ... SELECT * FROM ..., and
further requires that there be some out-of-line toasted fields in one of
the tuples to be copied; else we'll not reach the troublesome code.
The problem can only manifest in this form in 8.4 and later, because
before commit a77eaa6a95, CREATE TABLE AS or
INSERT/SELECT wouldn't result in raw disk tuples getting passed directly
to heap_insert --- there would always have been at least a junkfilter in
between, and that would reconstitute the tuple header with an up-to-date
t_natts and hence t_hoff. But I'm backpatching the tuptoaster change all
the way anyway, because I'm not convinced there are no older code paths
that present a similar risk.
Both dict_int and dict_xsyn were blithely assuming that whatever memory
palloc gives back will be pre-zeroed. This would typically work for
just about long enough to run their regression tests, and no longer :-(.
The pre-9.0 code in dict_xsyn was even lamer than that, as it would
happily give back a pointer to the result of palloc(0), encouraging
its caller to access off the end of memory. Again, this would just
barely fail to fail as long as memory contained nothing but zeroes.
Per a report from Rodrigo Hjort that code based on these examples
didn't work reliably.
This reverts commit ff41611ddc.
As pointed out by Naoya Anzai, we need to do more work to make that
idea handle end-of-index cases, and it is looking like too much risk
for a back-patch. So bug #6278 is only going to be fixed in HEAD.
If a tuple in a syscache contains an out-of-line toasted field, and we
try to fetch that field shortly after some other transaction has committed
an update or deletion of the tuple, there is a race condition: vacuum
could come along and remove the toast tuples before we can fetch them.
This leads to transient failures like "missing chunk number 0 for toast
value NNNNN in pg_toast_2619", as seen in recent reports from Andrew
Hammond and Tim Uckun.
The design idea of syscache is that access to stale syscache entries
should be prevented by relation-level locks, but that fails for at least
two cases where toasted fields are possible: ANALYZE updates pg_statistic
rows without locking out sessions that might want to plan queries on the
same table, and CREATE OR REPLACE FUNCTION updates pg_proc rows without
any meaningful lock at all.
The least risky fix seems to be an idea that Heikki suggested when we
were dealing with a related problem back in August: forcibly detoast any
out-of-line fields before putting a tuple into syscache in the first place.
This avoids the problem because at the time we fetch the parent tuple from
the catalog, we should be holding an MVCC snapshot that will prevent
removal of the toast tuples, even if the parent tuple is outdated
immediately after we fetch it. (Note: I'm not convinced that this
statement holds true at every instant where we could be fetching a syscache
entry at all, but it does appear to hold true at the times where we could
fetch an entry that could have a toasted field. We will need to be a bit
wary of adding toast tables to low-level catalogs that don't have them
already.) An additional benefit is that subsequent uses of the syscache
entry should be faster, since they won't have to detoast the field.
Back-patch to all supported versions. The problem is significantly harder
to reproduce in pre-9.0 releases, because of their willingness to flush
every entry in a syscache whenever the underlying catalog is vacuumed
(cf CatalogCacheFlushRelation); but there is still a window for trouble.
The existing scan-direction-sensitive tests were overly complex, and
failed to stop the scan in cases where it's perfectly legitimate to do so.
Per bug #6278 from Maksym Boguk.
Back-patch to 8.3, which is as far back as the patch applies easily.
Doesn't seem worth sweating over a relatively minor performance issue in
8.2 at this late date. (But note that this was a performance regression
from 8.1 and before, so 8.2 is being left as an outlier.)
cash_out failed to handle multiple-byte thousands separators, as per bug
#6277 from Alexander Law. In addition, cash_in didn't handle that either,
nor could it handle multiple-byte positive_sign. Both routines failed to
support multiple-byte mon_decimal_point, which I did not think was worth
changing, but at least now they check for the possibility and fall back to
using '.' rather than emitting invalid output. Also, make cash_in handle
trailing negative signs, which formerly it would reject. Since cash_out
generates trailing negative signs whenever the locale tells it to, this
last omission represents a fail-to-reload-dumped-data bug. IMO that
justifies patching this all the way back.
When a foreign-key constraint references another column of the same table,
row updates will queue both the PK's ON UPDATE action and the FK's CHECK
action in the same event. The ON UPDATE action must execute first, else
the CHECK will check a non-final state of the row and possibly throw an
inappropriate error, as seen in bug #6268 from Roman Lytovchenko.
Now, the firing order of multiple triggers for the same event is determined
by the sort order of their pg_trigger.tgnames, and the auto-generated names
we use for FK triggers are "RI_ConstraintTrigger_NNNN" where NNNN is the
trigger OID. So most of the time the firing order is the same as creation
order, and so rearranging the creation order fixes it.
This patch will fail to fix the problem if the OID counter wraps around or
adds a decimal digit (eg, from 99999 to 100000) while we are creating the
triggers for an FK constraint. Given the small odds of that, and the low
usage of self-referential FKs, we'll live with that solution in the back
branches. A better fix is to change the auto-generated names for FK
triggers, but it seems unwise to do that in stable branches because there
may be client code that depends on the naming convention. We'll fix it
that way in HEAD in a separate patch.
Back-patch to all supported branches, since this bug has existed for a long
time.
The heuristic for when to dump a cast failed for a cast between table
rowtypes, as reported by Frédéric Rejol. Fix it by setting
the "dump" flag for such a type the same way as the flag is set for the
underlying table or base type. This won't result in the auto-generated
type appearing in the output, since setting its objType to DO_DUMMY_TYPE
unconditionally suppresses that. But it will result in dumpCast doing what
was intended.
Back-patch to 8.3. The 8.2 code is rather different in this area, and it
doesn't seem worth any risk to fix a corner case that nobody has stumbled
on before.
This view was being insufficiently careful about matching the FK constraint
to the depended-on primary or unique key constraint. That could result in
failure to show an FK constraint at all, or showing it multiple times, or
claiming that it depended on a different constraint than the one it really
does. Fix by joining via pg_depend to ensure that we find only the correct
dependency.
Back-patch, but don't bump catversion because we can't force initdb in back
branches. The next minor-version release notes should explain that if you
need to fix this in an existing installation, you can drop the
information_schema schema then re-create it by sourcing
$SHAREDIR/information_schema.sql in each database (as a superuser of
course).
The documentation neglected to explain its behavior in a script file
(it only ends execution of the script, not psql as a whole), and failed
to mention the long form \quit either.
transform_null_equals is only supposed to affect "foo = NULL" expressions
given directly by the user, not the internal "foo = NULL" expression
generated from CASE-WHEN.
This fixes bug #6242, reported by Sergey. Backpatch to all supported
branches.
A similar problem for pgstattuple() was fixed in April of 2010 by commit
33065ef8bc, but pgstatindex() seems to have
been overlooked.
Back-patch all the way, as with that commit, though not to 7.4 through
8.1, since those are now EOL.
We were mapping "Central America Standard Time" to "CST6CDT", which seems
entirely wrong, because according to the Olson timezone database noplace
in Central America observes daylight savings time on any regular basis ---
and certainly not according to the USA DST rules that are implied by
"CST6CDT". (Mexico is an exception, but they can be disregarded since
they have a separate timezone name in Windows.) So, map this zone name to
plain "CST6", which will provide a fixed UTC offset.
As written, this patch will also result in mapping "Central America
Daylight Time" to CST6. I considered hacking things so that would still
map to CST6CDT, but it seems it would confuse win32tzlist.pl to put those
two names in separate entries. Since there's little evidence that any
such zone name is used in the wild, much less that CST6CDT would be a good
match for it, I'm not too worried about what we do with it.
Per complaint from Pratik Chirania.
This oversight led to a massive memory leak --- upwards of 10KB per tuple
--- during creation-time verification of an exclusion constraint based on a
GIST index. In most other scenarios it'd just be a leak of 10KB that would
be recovered at end of query, so not too significant; though perhaps the
leak would be noticeable in a situation where a GIST index was being used
in a nestloop inner indexscan. In any case, it's a real leak of long
standing, so patch all supported branches. Per report from Harald Fuchs.
Trailing-zero stripping applied by the FM specifier could strip zeroes
to the left of the decimal point, for a format with no digit positions
after the decimal point (such as "FM999.").
Reported and diagnosed by Marti Raudsepp, though I didn't use his patch.
The code in shift_jis_20042euc_jis_2004() would fetch two bytes even when
only one remained in the string. Since conversion functions aren't
supposed to assume null-terminated input, this poses a small risk of
fetching past the end of memory and incurring SIGSEGV. No such crash has
been identified in the field, but we've certainly seen the equivalent
happen in other code paths, so patch this one all the way back.
Report and patch by Noah Misch.
Since the last couple of columns of pg_type are often NULL,
sizeof(FormData_pg_type) can be an overestimate of the actual size of the
tuple data part. Therefore memcpy'ing that much out of the catalog cache,
as analyze.c was doing, poses a small risk of copying past the end of
memory and incurring SIGSEGV. No such crash has been identified in the
field, but we've certainly seen the equivalent happen in other code paths,
so patch this one all the way back.
Per valgrind testing by Noah Misch, though this is not his proposed patch.
I chose to use SearchSysCacheCopy1 rather than inventing special-purpose
infrastructure for copying only the minimal part of a pg_type tuple.
This example wasn't updated when we changed the behavior of bpcharlen()
in 8.0, nor when we changed the number of parameters taken by the bpchar()
cast function in 7.3. Per report from lsliang.
">" should be ">>". This typo results in failure to use all of the bits
of the provided seed.
This might rise to the level of a security bug if we were relying on
srand48 for any security-critical purposes, but we are not --- in fact,
it's not used at all unless the platform lacks srandom(), which is
improbable. Even on such a platform the exposure seems minimal.
Reported privately by Andres Freund.
ifdef block. It has nothing to do with whether the replacement snprintf
function is used. It caused no live bug, because the replacement snprintf
function is always used on Win32, but it was nevertheless misplaced.
The version of this macro used in autoconf 2.59 is capable of incorrectly
succeeding (ie, reporting that a library function is available when it
isn't), if the compiler performs link-time optimization and decides that
it can optimize the function reference away entirely. Replace it with the
coding used in autoconf 2.61 and later, which forces the program result to
depend on the function's result so that it cannot be optimized away. This
should fix build failures currently being seen on buildfarm member anchovy.
This patch affects the 8.2 and 8.3 branches only, since later branches are
using autoconf versions that don't have this problem.
These days, such a response is far more likely to signify a server-side
problem, such as fork failure. Reporting "server does not support SSL"
(in sslmode=require) could be quite misleading. But the results could
be even worse in sslmode=prefer: if the problem was transient and the
next connection attempt succeeds, we'll have silently fallen back to
protocol version 2.0, possibly disabling features the user needs.
Hence, it seems best to just eliminate the assumption that backing off
to non-SSL/2.0 protocol is the way to recover from an "E" response, and
instead treat the server error the same as we would in non-SSL cases.
I tested this change against a pre-7.0 server, and found that there
was a second logic bug in the "prefer" path: the test to decide whether
to make a fallback connection attempt assumed that we must have opened
conn->ssl, which in fact does not happen given an "E" response. After
fixing that, the code does indeed connect successfully to pre-7.0,
as long as you didn't set sslmode=require. (If you did, you get
"Unsupported frontend protocol", which isn't completely off base
given the server certainly doesn't support SSL.)
Since there seems no reason to believe that pre-7.0 servers exist anymore
in the wild, back-patch to all supported branches.
