This simplifies code that needs to do arithmetic on XLogRecPtrs.
To avoid changing on-disk format of data pages, the LSN on data pages is
still stored in the old format. That should keep pg_upgrade happy. However,
we have XLogRecPtrs embedded in the control file, and in the structs that
are sent over the replication protocol, so this changes breaks compatibility
of pg_basebackup and server. I didn't do anything about this in this patch,
per discussion on -hackers, the right thing to do would to be to change the
replication protocol to be architecture-independent, so that you could use
a newer version of pg_receivexlog, for example, against an older server
version.
This saves a few bytes of WAL space, but the real motivation is to make it
predictable how much WAL space a record requires, as it no longer depends
on whether we need to waste the last few bytes at end of WAL page because
the header doesn't fit.
The total length field of WAL record, xl_tot_len, is moved to the beginning
of the WAL record header, so that it is still always found on the first page
where a WAL record begins.
Bump WAL version number again as this is an incompatible change.
The continuation record only contained one field, xl_rem_len, so it makes
things simpler to just include it in the WAL page header. This wastes four
bytes on pages that don't begin with a continuation from previos page, plus
four bytes on every page, because of padding.
The motivation of this is to make it easier to calculate how much space a
WAL record needs. Before this patch, it depended on how many page boundaries
the record crosses. The motivation of that, in turn, is to separate the
allocation of space in the WAL from the copying of the record data to the
allocated space. Keeping the calculation of space required simple helps to
keep the critical section of allocating the space from WAL short. But that's
not included in this patch yet.
Bump WAL version number again, as this is an incompatible change.
The comments claimed that wasting the last segment made it easier to do
calculations with XLogRecPtrs, because you don't have problems representing
last-byte-position-plus-1 that way. In my experience, however, it only made
things more complicated, because the there was two ways to represent the
boundary at the beginning of a logical log file: logid = n+1 and xrecoff = 0,
or as xlogid = n and xrecoff = 4GB - XLOG_SEG_SIZE. Some functions were
picky about which representation was used.
Also, use a 64-bit segment number instead of the log/seg combination, to
point to a certain WAL segment. We assume that all platforms have a working
64-bit integer type nowadays.
This is an incompatible change in WAL format, so bumping WAL version number.
These days, even a wimpy system can insert 10000 tuples in the blink of
an eye, so there's no real need for this much verbosity.
Per complaint from Tatsuo Ishii.
Also, add some cross-links to the indexing documentation, so it's easier
to notice that && and other array operators have index support.
Ryan Kelly, edited by me.
Repeated execution of an uncorrelated ARRAY_SUBLINK sub-select (which
I think can only happen if the sub-select is embedded in a larger,
correlated subquery) would leak memory for the duration of the query,
due to not reclaiming the array generated in the previous execution.
Per bug #6698 from Armando Miraglia. Diagnosis and fix idea by Heikki,
patch itself by me.
This has been like this all along, so back-patch to all supported versions.
This speeds up reassigning locks to the parent owner, when the transaction
holds a lot of locks, but only a few of them belong to the current resource
owner. This is particularly helps pg_dump when dumping a large number of
objects.
The cache can hold up to 15 locks in each resource owner. After that, the
cache is marked as overflowed, and we fall back to the old method of
scanning the whole local lock table. The tradeoff here is that the cache has
to be scanned whenever a lock is released, so if the cache is too large,
lock release becomes more expensive. 15 seems enough to cover pg_dump, and
doesn't have much impact on lock release.
Jeff Janes, reviewed by Amit Kapila and Heikki Linnakangas.
The original coding in ri_triggers.c had partial support for the concept of
zero-column foreign key constraints. But this is not defined in the SQL
standard, nor was it ever allowed by any other part of Postgres, nor was it
very fully implemented even here (eg there was no support for preventing
PK-table deletions that would violate the constraint). Doesn't seem very
useful to carry 100-plus lines of code for a corner case that no one is
interested in making work. Instead, just add a check that the column list
read from pg_constraint is non-empty.
By my count there are 18 callers of CacheRegisterSyscacheCallback in the
core code in HEAD, so we are potentially leaving as few as 2 slots for any
add-on code to use (though possibly not all these callers would actually
activate in any particular session). That doesn't seem like a lot of
headroom, so let's pump it up a little.
Extracting data from pg_constraint turned out to take as much as 10% of the
runtime in a bulk-update case where the foreign key column wasn't changing,
because we did it over again for each tuple. Fix that by maintaining a
backend-local cache of the results. This is really a pretty small patch,
but converting the trigger functions to work with pointers rather than
local struct variables requires a lot of mechanical changes.
During an update of a PK row, we can skip firing the RI trigger if any old
key value is NULL, because then the row could not have had any matching
rows in the FK table. Conversely, during an update of an FK row, the
outcome is determined if any new key value is NULL. In either case it
becomes unnecessary to compare individual key values.
This patch was inspired by discussion of Vik Reykja's patch to use IS NOT
DISTINCT semantics for the key comparisons. In the event there is no need
for that and so this patch looks nothing like his, but he should still get
credit for having re-opened consideration of the trigger skip logic.
The option --foreign-keys, used at initialization time, will create foreign
key constraints for the columns that represent references to other tables'
primary keys. This can help in benchmarking FK performance.
Jeff Janes
These triggers are identical except for whether ri_Check_Pk_Match is to be
called, so factor out the common code to save a couple hundred lines.
Also, eliminate null-column checks in ri_Check_Pk_Match, since they're
duplicate with the calling functions and require unnecessary complication
in its API statement.
Simplify the way code is shared between RI_FKey_check_ins and
RI_FKey_check_upd, too.
I was confused about this, so try to make it clearer for the next person.
(This seems like a fairly inefficient way of dealing with a corner case,
but I don't have a better idea offhand. Maybe if there were a way to turn
off the RI_FKey_keyequal_upd_fk event filter temporarily?)
Once upon a time, somebody was worried that cached RI plans wouldn't get
remade with new default values after ALTER TABLE ... SET DEFAULT, so they
didn't allow caching of plans for ON UPDATE/DELETE SET DEFAULT actions.
That time is long gone, though (and even at the time I doubt this was the
greatest hazard posed by ALTER TABLE...). So allow these triggers to cache
their plans just like the others.
The cache_plan argument to ri_PlanCheck is now vestigial, since there
are no callers that don't pass "true"; but I left it alone in case there
is any future need for it.
We really only need the foreign key constraint's OID and the query type
code to uniquely identify each plan we are caching for FK checks. The
other stuff that was in the struct had no business being used as part of
a hash key, and was all just being copied from struct RI_ConstraintInfo
anyway. Get rid of the unnecessary fields, and readjust various function
APIs to make them use RI_ConstraintInfo not RI_QueryKey as info source.
I'd be surprised if this makes any measurable performance difference,
but it certainly feels cleaner.
Now that what we're implementing isn't SQL92, we probably shouldn't cite
chapter and verse in that spec anymore. Also fix some comments that
talked about MATCH FULL but in fact were in code that's also used for
MATCH SIMPLE.
No code changes in this commit, just comments.
Previously, when executing an ON UPDATE SET NULL or SET DEFAULT action for
a multicolumn MATCH SIMPLE foreign key constraint, we would set only those
referencing columns corresponding to referenced columns that were changed.
This is what the SQL92 standard said to do --- but more recent versions
of the standard say that all referencing columns should be set to null or
their default values, no matter exactly which referenced columns changed.
At least for SET DEFAULT, that is clearly saner behavior. It's somewhat
debatable whether it's an improvement for SET NULL, but it appears that
other RDBMS systems read the spec this way. So let's do it like that.
This is a release-notable behavioral change, although considering that
our documentation already implied it was done this way, the lack of
complaints suggests few people use such cases.
Previously we followed the SQL92 wording, "MATCH <unspecified>", but since
SQL99 there's been a less awkward way to refer to the default style.
In addition to the code changes, pg_constraint.confmatchtype now stores
this match style as 's' (SIMPLE) rather than 'u' (UNSPECIFIED). This
doesn't affect pg_dump or psql because they use pg_get_constraintdef()
to reconstruct foreign key definitions. But other client-side code might
examine that column directly, so this change will have to be marked as
an incompatibility in the 9.3 release notes.
Before, some places didn't document the short options (-? and -V),
some documented both, some documented nothing, and they were listed in
various orders. Now this is hopefully more consistent and complete.
Formerly, if the system clock went backwards, the stats collector would
fail to update the stats file any more until the clock reading again
exceeds whatever timestamp was last written into the stats file. Such
glitches in the clock's behavior are not terribly unlikely on machines
not using NTP. Such a scenario has been observed to cause regression test
failures in the buildfarm, and it could have bad effects on the behavior
of autovacuum, so it seems prudent to install some defenses.
We could directly detect the clock going backwards by adding
GetCurrentTimestamp calls in the stats collector's main loop, but that
would hurt performance on platforms where GetCurrentTimestamp is expensive.
To minimize the performance hit in normal cases, adopt a more complicated
scheme wherein backends check for clock skew when reading the stats file,
and if they see it, signal the stats collector by sending an extra stats
inquiry message. The stats collector does an extra GetCurrentTimestamp
only when it receives an inquiry with an apparently out-of-order
timestamp.
To avoid unnecessary GetCurrentTimestamp calls, expand the inquiry messages
to carry the backend's current clock reading as well as its stats cutoff
time. The latter, being intentionally slightly in-the-past, would trigger
more clock rechecks than we need if it were used for this purpose.
We might want to backpatch this change at some point, but let's let it
shake out in the buildfarm for awhile first.
Since this is the easy way of doing it, it should be listed first. All
the old information is retained for those who want the more advanced way.
Also adds a subheading for compressing logs, that seems to have been missing
Because permissions are assigned to element types, not array types,
complaining about permission denied on an array type would be
misleading to users. So adjust the reporting to refer to the element
type instead.
In order not to duplicate the required logic in two dozen places,
refactor the permission denied reporting for types a bit.
pointed out by Yeb Havinga during the review of the type privilege
feature
There's no need to hold onto the locks until the files are needed,
and by doing it this way, we reduce the impact on other backends who
may be awaiting locks we hold.
Noah Misch
When I implemented the ginbuildempty() function as part of
implementing unlogged tables, I falsified the note in the header
comment for log_newpage. Although we could fix that up by changing
the comment, it seems cleaner to add a new function which is
specifically intended to handle this case. So do that.
Even when allow_system_table_mods is not set, we allow creation of any
type of SQL object in pg_catalog, except for relations. And you can
get relations into pg_catalog, too, by initially creating them in some
other schema and then moving them with ALTER .. SET SCHEMA. So this
restriction, which prevents relations (only) from being created in
pg_catalog directly, is fairly pointless. If we need a safety mechanism
for this, it should be placed further upstream, so that it affects all
SQL objects uniformly, and picks up both CREATE and SET SCHEMA.
For now, just rip it out, per discussion with Tom Lane.
This includes fixing the MSVC copy of ecpg/preproc's version info, which
seems to have been overlooked repeatedly. Can't we fix that so there are
not two copies??
Instead of identifying error locations only by line number (which could
be entirely unhelpful with long input lines), provide a fragment of the
input text too, placing this info in a new CONTEXT entry. Make the
error detail messages conform more closely to style guidelines, fix
failure to expose some of them for translation, ensure compiler can
check formats against supplied parameters.
