Commit 619bc23a1 changed "make dist" to invoke "git archive",
but hard-wired the call to specify that the HEAD revision should
be packaged. Our tarball building process needs to be able to
specify which git commit to package (notably, for packaging
back branches). While we could make that work with some hackery
to operate in detached-HEAD state, it's a lot nicer just to expose
git archive's ability to specify what to package. Hence, invent
a new make variable PG_GIT_REVISION. This is undocumented, but
so is "make dist".
Also make corresponding changes in the meson scripts. We have no
near-term intention of using that for package building, but it
will likely happen eventually, so stay prepared.
Discussion: https://postgr.es/m/3552543.1713909947@sss.pgh.pa.us
While converting a pg_attribute tuple into a ColumnDef,
ColumnDef::compression remains NULL if there is no compression method
set fot the attribute. Calling strcmp() with NULL
ColumnDef::compression, when comparing compression methods of parents,
causes segmentation fault in MergeInheritedAttribute(). Skip
comparing compression methods if either of them is NULL.
Author: Ashutosh Bapat <ashutosh.bapat@enterprisedb.com>
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://www.postgresql.org/message-id/b22a6834-aacb-7b18-0424-a3f5fe889667%40gmail.com
We support changing NO INHERIT constraint to INHERIT for constraints in
child relations when adding a constraint to some ancestor relation, and
also during pg_upgrade's schema restore; but other than those special
cases, command ALTER TABLE ADD CONSTRAINT should not be allowed to
change an existing constraint from NO INHERIT to INHERIT, as that would
require to process child relations so that they also acquire an
appropriate constraint, which we may not be in a position to do. (It'd
also be surprising behavior.)
It is conceivable that we want to allow ALTER TABLE SET NOT NULL to make
such a change; but in that case some more code is needed to implement it
correctly, so for now I've made that throw the same error message.
Also, during the prep phase of ALTER TABLE ADD CONSTRAINT, acquire locks
on all descendant tables; otherwise we might operate on child tables on
which no locks are held, particularly in the mode where a primary key
causes not-null constraints to be created on children.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/7d923a66-55f0-3395-cd40-81c142b5448b@gmail.com
libpq's pqTraceOutputMessage() used to look like this:
case 'Z': /* Ready For Query */
pqTraceOutputZ(conn->Pfdebug, message, &logCursor);
break;
Commit f4b54e1ed9 introduced macros for protocol characters, so now
it looks like this:
case PqMsg_ReadyForQuery:
pqTraceOutputZ(conn->Pfdebug, message, &logCursor);
break;
But this introduced a disconnect between the symbol in the switch case
and the function name to be called, so this made the manageability of
this file a bit worse.
This patch changes the function names to match, so now it looks like
this:
case PqMsg_ReadyForQuery:
pqTraceOutput_ReadyForQuery(conn->Pfdebug, message, &logCursor);
break;
(This also improves the readability of the file in general, since some
function names like "pqTraceOutputt" were a little hard to read
accurately.)
Some protocol characters have different meanings to and from the
server. The old code structure had a common function for both, for
example, pqTraceOutputD(). The new structure splits this up into
separate ones to match the protocol message name, like
pqTraceOutput_Describe() and pqTraceOutput_DataRow().
Reviewed-by: Yugo NAGATA <nagata@sraoss.co.jp>
Discussion: https://www.postgresql.org/message-id/flat/575e4f9d-acfe-45e3-b7f1-7e32c579090e%40eisentraut.org
Such constraints are semantically useless and only bring weird cases
along, so reject them.
As a side effect, we can no longer have "throwaway" constraints in
pg_dump for primary keys in partitioned tables, but since they don't
serve any useful purpose, we can just omit them.
Maybe this should be done for all types of constraints, but it's just
not-null ones that acquired this "ability" in the 17 timeframe, so for
the moment I'm not changing anything else.
Per note by Alexander Lakhin.
Discussion: https://postgr.es/m/7d923a66-55f0-3395-cd40-81c142b5448b@gmail.com
Commit 61461a300c accidentally misspelled the PGcancelConn struct
using the PQ prefix (which admittedly is a very easy typo to make).
Reported off-list.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
The documentation said that you need to pick a suitable LC_COLLATE
setting in addition to setting the DETERMINISTIC flag. This would
have been correct if the libc provider supported nondeterministic
collations, but since it doesn't, you actually need to set the LOCALE
option.
Reviewed-by: Kashif Zeeshan <kashi.zeeshan@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/a71023c2-0ae0-45ad-9688-cf3b93d0d65b%40eisentraut.org
When testing pg_upgrade against an old server, ignore failures on the
check to upgrade invalid databases. This is necessary because old
servers don't know to raise the appropriate error of the database being
invalid.
This change causes no reduction in coverage, because such old versions
don't know to mark databases invalid when a drop is interrupted; but
testing against such old servers is useful in some circumstances.
Backpatch to 16, where it cherry-picks with minimal conflicts.
On 16, perltidy 20230309 chooses to change an unrelated line. I let it
do that because that's the version we document as preferred for that
branch, even though it would make other changes to many other files in
the tree.
Discussion: https://postgr.es/m/202404181539.lh42llaesnv3@alvherre.pgsql
A parallel worker's buffer usage is accumulated to its pgBufferUsage
and then is accumulated into the leader's one at the end of the
parallel vacuum. However, since the leader process used to use
dedicated VacuumPage{Hit, Miss, Dirty} globals for the buffer usage
reporting, the worker's buffer usage was not included, leading to an
incorrect buffer usage report.
To fix the problem, this commit makes vacuum use pgBufferUsage
instruments for buffer usage reporting instead of VacuumPage{Hit,
Miss, Dirty} globals. These global variables are still used by ANALYZE
command and autoanalyze.
This also fixes the buffer usage report of vacuuming on temporary
tables, since the buffers dirtied by MarkLocalBufferDirty() were not
tracked by the VacuumPageDirty variable.
Parallel vacuum was introduced in 13, but the buffer usage reporting
for VACUUM command with the VERBOSE option was implemented in
15. So backpatch to 15.
Reported-by: Anthonin Bonnefoy
Author: Anthonin Bonnefoy
Reviewed-by: Alena Rybakina, Masahiko Sawada
Discussion: https://postgr.es/m/CAO6_XqrQk+QZQcYs_C6nk0cMfHuUWk85vT9CrcA1NffFbAVE2A@mail.gmail.com
Backpatch-through: 15
As an optimization, we store "name" columns as cstrings in btree
indexes.
Here we modify it so that Index Only Scans convert these cstrings back
to names with NAMEDATALEN bytes rather than storing the cstring in the
tuple slot, as was happening previously.
Bug: #17855
Reported-by: Alexander Lakhin
Reviewed-by: Alexander Lakhin, Tom Lane
Discussion: https://postgr.es/m/17855-5f523e0f9769a566@postgresql.org
Backpatch-through: 12, all supported versions
If the bootstrap superuser's name requires quoting, regroleout
will supply double quotes ... but the result of CURRENT_USER
is just the literal name. Apply quote_ident() to ensure a match.
Per Andrew Dunstan's off-list investigation of buildfarm member
prion's failures.
This commit makes new partitions created by ALTER TABLE ... SPLIT PARTITION
and ALTER TABLE ... MERGE PARTITIONS commands inherit the paret table access
method.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/84ada05b-be5c-473e-6d1c-ebe5dd21b190%40gmail.com
Reviewed-by: Pavel Borisov
This commit implements psql tab completion for ALTER TABLE ... SPLIT PARTITION
and ALTER TABLE ... MERGE PARTITIONS commands.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/5dee3937-8e9f-cca4-11fb-737709a92b37%40gmail.com
Author: Dagfinn Ilmari Mannsåker, Pavel Borisov
Replace "salesman" with "salesperson", "salesmen" with "salespeople". The
names are both gramatically correct and gender-neutral.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/fdaa003e-919c-cbc9-4f0c-e4546e96bd65%40gmail.com
Reviewed-by: Robert Haas, Pavel Borisov
Currently, the error message is produced by a system of complex substitutions
making it quite untranslatable and hard to read. This commit splits this into
4 plain error messages suitable for translation.
Reported-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20240408.152402.1485994009160660141.horikyota.ntt%40gmail.com
Reviewed-by: Pavel Borisov
The createPartitionTable() function is responsible for creating new partitions
for ALTER TABLE ... MERGE PARTITIONS, and ALTER TABLE ... SPLIT PARTITION
commands. It emulates the behaviour of CREATE TABLE ... (LIKE ...), where
new table persistence should be specified by the user. In the table
partitioning persistent of the partition and its parent must match. So, this
commit makes createPartitionTable() copy the persistence of the parent
partition.
Also, this commit makes createPartitionTable() recheck the persistence after
the new table creation. This is needed because persistence might be affected
by pg_temp in search_path.
This commit also changes the signature of createPartitionTable() making it
take the parent's Relation itself instead of the name of the parent relation,
and return the Relation of new partition. That doesn't lead to
complications, because both callers have the parent table open and need to
open the new partition.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/dbc8b96c-3cf0-d1ee-860d-0e491da20485%40gmail.com
Author: Dmitry Koval
Reviewed-by: Alexander Korotkov, Robert Haas, Justin Pryzby, Pavel Borisov
The name collision happens when the name of the new partition is the same as
the name of one of the merging partitions. Currently, ATExecMergePartitions()
first gives the new partition a temporary name and then renames it when old
partitions are deleted. That negatively influences the naming of related
objects like indexes and constrains, which could inherit a temporary name.
This commit changes the implementation in the following way. A merging
partition gets renamed first, then the new partition is created with the
right name immediately. This resolves the issue of the naming of related
objects.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/edfbd846-dcc1-42d1-ac26-715691b687d3%40postgrespro.ru
Author: Dmitry Koval, Alexander Korotkov
Reviewed-by: Robert Haas, Justin Pryzby, Pavel Borisov
I'd not checked that this iteration of the test actually worked
with a bootstrap superuser not named 'postgres'. It didn't,
because the coercion rules for CASE caused us to try to cast
the 'postgres' literal to regrole. Mea culpa.
Per buildfarm (via Alexander Korotkov)
Discussion: https://postgr.es/m/CAPpHfdsV=iTvH6B858hnH1bLgewYH6cdTnO_eOOw9EOa8kehkA@mail.gmail.com
This had been disabled because the test "doesn't delete its user".
It doesn't seem like a great idea for the meson tests to act
differently from the makefile tests, though, and the makefiles
had no such exception (which is how come only copperhead noticed
the problem just fixed in 534287403). In any case, the premise
is false since 936e3fa37, so let's remove the restriction.
Discussion: https://postgr.es/m/2857513.1713733688@sss.pgh.pa.us
If an ACL recorded in pg_init_privs mentions a non-pinned role,
that reference must also be noted in pg_shdepend so that we know
that the role can't go away without removing the ACL reference.
Otherwise, DROP ROLE could succeed and leave dangling entries
behind, which is what's causing the recent upgrade-check failures
on buildfarm member copperhead.
This has been wrong since pg_init_privs was introduced, but it's
escaped notice because typical pg_init_privs entries would only
mention the bootstrap superuser (pinned) or at worst the owner
of the extension (who can't go away before the extension does).
We lack even a representation of such a role reference for
pg_shdepend. My first thought for a solution was entries listing
pg_init_privs in classid, but that doesn't work because then there's
noplace to put the granted-on object's classid. Rather than adding
a new column to pg_shdepend, let's add a new deptype code
SHARED_DEPENDENCY_INITACL. Much of the associated boilerplate
code can be cribbed from code for SHARED_DEPENDENCY_ACL.
A lot of the bulk of this patch just stems from the new need to pass
the object's owner ID to recordExtensionInitPriv, so that we can
consult it while updating pg_shdepend. While many callers have that
at hand already, a few places now need to fetch the owner ID of an
arbitrary privilege-bearing object. For that, we assume that there
is a catcache on the relevant catalog's OID column, which is an
assumption already made in ExecGrant_common so it seems okay here.
We do need an entirely new routine RemoveRoleFromInitPriv to perform
cleanup of pg_init_privs ACLs during DROP OWNED BY. It's analogous
to RemoveRoleFromObjectACL, but we can't share logic because that
function operates by building a command parsetree and invoking
existing GRANT/REVOKE infrastructure. There is of course no SQL
command that would update pg_init_privs entries when we're not in
process of creating their extension, so we need a routine that can
do the updates directly.
catversion bump because this changes the expected contents of
pg_shdepend. For the same reason, there's no hope of back-patching
this, even though it fixes a longstanding bug. Fortunately, the
case where it's a problem seems to be near nonexistent in the field.
If it weren't for the buildfarm breakage, I'd have been content to
leave this for v18.
Patch by me; thanks to Daniel Gustafsson for review and discussion.
Discussion: https://postgr.es/m/1745535.1712358659@sss.pgh.pa.us
Repeating loads of inplace-updated fields tends to cause bugs like the
one from the previous commit. While there's no bug to fix in these code
sites, adopt the load-once style. This improves the chance of future
copy/paste finding the safe style.
Discussion: https://postgr.es/m/20240423003956.e7.nmisch@google.com
vac_update_datfrozenxid() did multiple loads of relfrozenxid and
relminmxid from buffer memory, and it assumed each would get the same
value. Not so if a concurrent vac_update_relstats() did an inplace
update. Commit 2d2e40e3be fixed the same
kind of bug in vac_truncate_clog(). Today's bug could cause the
rel-level field and XIDs in the rel's rows to precede the db-level
field. A cluster having such values should VACUUM affected tables.
Back-patch to v12 (all supported versions).
Discussion: https://postgr.es/m/20240423003956.e7.nmisch@google.com
If the client supports ALPN but tries to use some other protocol, like
HTTPS, reject the connection in the server. That is surely a confusion
of some sort. Furthermore, the ALPN RFC 7301 says:
> In the event that the server supports no protocols that the client
> advertises, then the server SHALL respond with a fatal
> "no_application_protocol" alert.
This commit makes the server follow that advice.
In the client, specifically check for the OpenSSL error code for the
"no_application_protocol" alert. Otherwise you got a cryptic "SSL
error: SSL error code 167773280" error if you tried to connect to a
non-PostgreSQL server that rejects the connection with
"no_application_protocol". ERR_reason_error_string() returns NULL for
that code, which frankly seems like an OpenSSL bug to me, but we can
easily print a better message ourselves.
Reported-by: Jacob Champion
Discussion: https://www.postgresql.org/message-id/6aedcaa5-60f3-49af-a857-2c76ba55a1f3@iki.fi
These messages were lost in commit 05fd30c0e7. Put them back.
This makes one change in the error message behavior compared to v16,
in the case that the server responds to GSSRequest with an error
instead of rejecting it with 'N'. Previously, libpq would hide the
error that the server sent, assuming that you got the error because
the server is an old pre-v12 version that doesn't understand the
GSSRequest message. A v11 server sends a "FATAL: unsupported frontend
protocol 1234.5680: server supports 2.0 to 3.0" error if you try to
connect to it with GSS. That was a reasonable assumption when the
feature was introduced, but v12 was released a long time ago and I
don't think it's the most probable cause anymore. The attached patch
changes things so that libpq prints the error message that the server
sent in that case, making the "server responds with error to
GSSRequest" case behave the same as the "server responds with error to
SSLRequest" case.
Reported-by: Peter Eisentraut
Discussion: https://www.postgresql.org/message-id/bb3b94da-afc7-438d-8940-cb946e553d9d@eisentraut.org
The ECPG and main 2PC tests have been using rather-generic names for the
prepared transactions they generate. This commit switches the 2PC
transactions to use more complex GIDs, reducing the risk of naming
conflicts.
The main 2PC tests also include scans of pg_prepared_xacts that do not
apply filters on the GID of the prepared transactions, making it
possible to fail the test when any 2PC transaction runs concurrently.
The CI has been able to see such failures with an installcheck
running the ECPG and the main regression test suites in parallel. The
queries on pg_prepared_xacts gain quals to only look after the GIDs
generated locally.
The race is very hard to reproduce, so no backbatch is done for now.
Reported-by: Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-mWCGbbE_bne5=AfqjYGDaUZmjCw2+soLjrdNA0xUDFw@mail.gmail.com
The documentation says that PQsslAttribute(conn, "alpn") returns an
empty string if ALPN is not used, but the code actually returned
NULL. Fix the code to match the documentation.
Reported-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/ZideNHji0G4gxmc3@paquier.xyz
The paragraph in the docs and the comment applied to
sslnegotiaton=direct, but not sslnegotiation=requiredirect. In
'requiredirect' mode, negotiated SSL is never used. Move the paragraph
in the docs under the description of 'direct' mode, and rephrase it.
Also the comment's reference to reusing a plaintext connection was
bogus. Authentication failure in plaintext mode only happens after
sending the startup packet, so the connection cannot be reused.
Reported-by: Jacob Champion
Discussion: https://www.postgresql.org/message-id/CAOYmi+=sj+1uydS0NR4nYzw-LRWp3Q-s5speBug5UCLSPMbvGA@mail.gmail.com
ALTER COLUMN TYPE wasn't expecting to find any pg_proc objects
depending on the column whose type is to be altered. That indeed
wasn't possible when this code was written, but it is possible
since we introduced new-style SQL function bodies.
It's about as difficult to fix this case as it is to fix dependent
views, and we've been punting on those for years, so I don't feel
too awful about punting for functions too. (I sure wouldn't risk
back-patching such code.) So just throw a more user-facing error.
Also, adjust some of the existing comments to reflect that these
are all pretty much the same issue.
(This patch also fixes it so we will tolerate finding such a
dependency during ALTER COLUMN SET EXPRESSION; in that, we need
not do anything to the function, so no error is wanted. That
problem is new in HEAD.)
Per bug #18449 from Alexander Lakhin. Back-patch to v14 where
we added new-style SQL functions.
Discussion: https://postgr.es/m/18449-f8248467aaa294d5@postgresql.org
In commit 25cd2d640 I (tgl) opined that "The additions of the months
and microseconds fields could also overflow, of course. However,
I believe we need no additional checks there; the existing range
checks should catch such cases". This is demonstrably wrong however
for the microseconds field, and given that discovery it seems prudent
to be paranoid about the months addition as well.
Report and patch by Joseph Koshakow. As before, back-patch to all
supported branches. (However, the test case doesn't work before
v15 because we didn't allow wider-than-int32 numbers in interval
literals. A variant test could probably be built that fits within
that restriction, but it didn't seem worth the trouble.)
Discussion: https://postgr.es/m/CAAvxfHf77sRHKoEzUw9_cMYSpbpNS2C+J_+8Dq4+0oi8iKopeA@mail.gmail.com
JsonNonTerminal and JsonParserSem were added in commit 3311ea86ed
These names of these two enums are not actually used, so there is no
need for typedefs. Instead use plain enums to declare the constants.
Noticed by Alvaro Herera.
- Bring memory context names in line with other naming
- Fix typos, reported off-list by Alexander Lakhin
- Remove copy-paste errors from comments
- Remove duplicate #undef
The --tablespace-mapping option was specified with required_argument
rather than no_argument, which is wrong. Since the actual argument
string passed to getopt_long() included "T:", the single-character
form of the option still worked, but the long form did not. Repair.
The call to getopt_long() erroneously included "P", which doesn't
correspond to any supported option. Remove.
The help message used "do not" in one place and "don't" in another.
Standardize on "do not".
The documentation erroneously stated that the tablespace mappings
would be applied relative to the pathnames in the first backup
specified on the command line, rather than the final one. Fix.
Thanks to Tomas Vondra and Daniel Gustafsson for alerting me to
these mistakes.
Discussion: http://postgr.es/m/CA+TgmoYFznwwaZhHSF1Ze7JeyBv-1yOoSrucKMw37WpF=7RP8g@mail.gmail.com
If not all backups have the same checksum status, but the final backup
has checksums enabled, then the output directory may include pages
with invalid checksums. Document this limitation and explain how to
work around it.
In a future release, we may want to teach pg_combinebackup to
recompute page checksums when required, but as feature freeze has come
and gone, it seems a bit too late to do that for this release.
Patch by me, reviewed by Daniel Gustafsson
Discussion: http://postgr.es/m/CA+TgmoZugzOSmgkx97u3pc0M7U8LycWvugqoyWBv6j15a4hE5g@mail.gmail.com
In e6927270cd I added a 'touch meson.build' to configure.ac, to ensure
conflicts between in-tree configure based builds and meson builds are
automatically detected. Unfortunately I omitted spaces around the condition
restricting this to in-tree builds, leading to touch meson.build to also be
executed in vpath builds. While the only consequence of this buglet is an
unnecessary empty file in build directories, it seems worth backpatching.
Reported-by: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/20240417230002.mb2gv3hyetyn67gk@awork3.anarazel.de
Backpatch: 16-, where the meson based build was added
