I thought commit fd96d14d9 had plugged all the holes of this sort,
but no, function RTEs could produce oversize tuples too, either
via long coldeflists or just from multiple functions in one RTE.
(I'm pretty sure the other variants of base RTEs aren't a problem,
because they ultimately refer to either a table or a sub-SELECT,
whose widths are enforced elsewhere. But we explicitly allow join
RTEs to be overwidth, as long as you don't try to form their
tuple result.)
Per further discussion of bug #17561. As before, patch all branches.
Discussion: https://postgr.es/m/17561-80350151b9ad2ad4@postgresql.org
The new test is from commit 9e4f914b5e.
With this setting messages have SQL error numbers included, so that
needs to be provided for in the pattern looked for.
Backpatch to all live branches like the original.
A RowExpr with more than MaxTupleAttributeNumber columns would fail at
execution anyway, since we cannot form a tuple datum with more than that
many columns. While heap_form_tuple() has a check for too many columns,
it emerges that there are some intermediate bits of code that don't
check and can be driven to failure with sufficiently many columns.
Checking this at parse time seems like the most appropriate place to
install a defense, since we already check SELECT list length there.
While at it, make the SELECT-list-length error use the same errcode
(TOO_MANY_COLUMNS) as heap_form_tuple does, rather than the generic
PROGRAM_LIMIT_EXCEEDED.
Per bug #17561 from Egor Chindyaskin. The given test case crashes
in all supported branches (and probably a lot further back),
so patch all.
Discussion: https://postgr.es/m/17561-80350151b9ad2ad4@postgresql.org
On FreeBSD, the new test fails due to a WAL file being removed before
the standby has had the chance to copy it. Fix by adding a replication
slot to prevent the removal until after the standby has connected.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAEze2Wj5nau_qpjbwihvmXLfkAWOZ5TKdbnqOc6nKSiRJEoPyQ@mail.gmail.com
Crash recovery on standby may encounter missing directories
when replaying database-creation WAL records. Prior to this
patch, the standby would fail to recover in such a case;
however, the directories could be legitimately missing.
Consider the following sequence of commands:
CREATE DATABASE
DROP DATABASE
DROP TABLESPACE
If, after replaying the last WAL record and removing the
tablespace directory, the standby crashes and has to replay the
create database record again, crash recovery must be able to continue.
A fix for this problem was already attempted in 49d9cfc68bf4, but it
was reverted because of design issues. This new version is based
on Robert Haas' proposal: any missing tablespaces are created
during recovery before reaching consistency. Tablespaces
are created as real directories, and should be deleted
by later replay. CheckRecoveryConsistency ensures
they have disappeared.
The problems detected by this new code are reported as PANIC,
except when allow_in_place_tablespaces is set to ON, in which
case they are WARNING. Apart from making tests possible, this
gives users an escape hatch in case things don't go as planned.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Asim R Praveen <apraveen@pivotal.io>
Author: Paul Guo <paulguo@gmail.com>
Reviewed-by: Anastasia Lubennikova <lubennikovaav@gmail.com> (older versions)
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com> (older versions)
Reviewed-by: Michaël Paquier <michael@paquier.xyz>
Diagnosed-by: Paul Guo <paulguo@gmail.com>
Discussion: https://postgr.es/m/CAEET0ZGx9AvioViLf7nbR_8tH9-=27DN5xWJ2P9-ROH16e4JUA@mail.gmail.com
This is a backpatch to branches 10-14 of the following commits:
7170f2159fb2 Allow "in place" tablespaces.
c6f2f01611d4 Fix pg_basebackup with in-place tablespaces.
f6f0db4d6240 Fix pg_tablespace_location() with in-place tablespaces
7a7cd84893e0 doc: Remove mention to in-place tablespaces for pg_tablespace_location()
5344723755bd Remove unnecessary Windows-specific basebackup code.
In-place tablespaces were introduced as a testing helper mechanism, but
they are going to be used for a bugfix in WAL replay to be backpatched
to all stable branches.
I (Álvaro) had to adjust some code to account for lack of
get_dirent_type() in branches prior to 14.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Michaël Paquier <michael@paquier.xyz>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20220722081858.omhn2in5zt3g4nek@alvherre.pgsql
We have a few commands that "can't run in a transaction block",
meaning that if they complete their processing but then we fail
to COMMIT, we'll be left with inconsistent on-disk state.
However, the existing defenses for this are only watertight for
simple query protocol. In extended protocol, we didn't commit
until receiving a Sync message. Since the client is allowed to
issue another command instead of Sync, we're in trouble if that
command fails or is an explicit ROLLBACK. In any case, sitting
in an inconsistent state while waiting for a client message
that might not come seems pretty risky.
This case wasn't reachable via libpq before we introduced pipeline
mode, but it's always been an intended aspect of extended query
protocol, and likely there are other clients that could reach it
before.
To fix, set a flag in PreventInTransactionBlock that tells
exec_execute_message to force an immediate commit. This seems
to be the approach that does least damage to existing working
cases while still preventing the undesirable outcomes.
While here, add some documentation to protocol.sgml that explicitly
says how to use pipelining. That's latent in the existing docs if
you know what to look for, but it's better to spell it out; and it
provides a place to document this new behavior.
Per bug #17434 from Yugo Nagata. It's been wrong for ages,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17434-d9f7a064ce2a88a3@postgresql.org
Due to lack of concern for the case in the dependency code, it's
possible to drop a column of a composite type even though stored
queries have references to the dropped column via functions-in-FROM
that return the composite type. There are "soft" references,
namely FROM-clause aliases for such columns, and "hard" references,
that is actual Vars referring to them. The right fix for hard
references is to add dependencies preventing the drop; something
we've known for many years and not done (and this commit still doesn't
address it). A "soft" reference shouldn't prevent a drop though.
We've been around on this before (cf. 9b35ddce9, 2c4debbd0), but
nobody had noticed that the current behavior can result in dump/reload
failures, because ruleutils.c can print more column aliases than the
underlying composite type now has. So we need to rejigger the
column-alias-handling code to treat such columns as dropped and not
print aliases for them.
Rather than writing new code for this, I used expandRTE() which already
knows how to figure out which function result columns are dropped.
I'd initially thought maybe we could use expandRTE() in all cases, but
that fails for EXPLAIN's purposes, because the planner strips a lot of
RTE infrastructure that expandRTE() needs. So this patch just uses it
for unplanned function RTEs and otherwise does things the old way.
If there is a hard reference (Var), then removing the column alias
causes us to fail to print the Var, since there's no longer a name
to print. Failing seems less desirable than printing a made-up
name, so I made it print "?dropped?column?" instead.
Per report from Timo Stolz. Back-patch to all supported branches.
Discussion: https://postgr.es/m/5c91267e-3b6d-5795-189c-d15a55d61dbb@nullachtvierzehn.de
When a non-exclusive backup is canceled, do_pg_abort_backup() is called
and resets some variables set by pg_backup_start (pg_start_backup in v14
or before). But previously it forgot to reset the session state indicating
whether a non-exclusive backup is in progress or not in this session.
This issue could cause an assertion failure when the session running
BASE_BACKUP is terminated after it executed pg_backup_start and
pg_backup_stop (pg_stop_backup in v14 or before). Also it could cause
a segmentation fault when pg_backup_stop is called after BASE_BACKUP
in the same session is canceled.
This commit fixes the issue by making do_pg_abort_backup reset
that session state.
Back-patch to all supported branches.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Masahiko Sawada, Michael Paquier, Robert Haas
Discussion: https://postgr.es/m/3374718f-9fbf-a950-6d66-d973e027f44c@oss.nttdata.com
Multiple non-exclusive backups are able to be run conrrently in different
sessions. But, in the same session, only one non-exclusive backup can be
run at the same moment. If pg_backup_start (pg_start_backup in v14 or before)
is called in the middle of another non-exclusive backup in the same session,
an error is thrown.
However, previously, in logical replication walsender mode, even if that
walsender session had already called pg_backup_start and started
a non-exclusive backup, it could execute BASE_BACKUP command and
start another non-exclusive backup. Which caused subsequent pg_backup_stop
to throw an error because BASE_BACKUP unexpectedly reset the session state
marked by pg_backup_start.
This commit prevents BASE_BACKUP command in the middle of another
non-exclusive backup in the same session.
Back-patch to all supported branches.
Author: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, Masahiko Sawada, Michael Paquier, Robert Haas
Discussion: https://postgr.es/m/3374718f-9fbf-a950-6d66-d973e027f44c@oss.nttdata.com
The motivation for this is to ensure successful transmission of the
values of constants of regconfig and other reg* types. The remote
will be reading them with search_path = 'pg_catalog', so schema
qualification is necessary when referencing objects in other schemas.
Per bug #17483 from Emmanuel Quincerot. Back-patch to all supported
versions. (There's some other stuff to do here, but it's less
back-patchable.)
Discussion: https://postgr.es/m/1423433.1652722406@sss.pgh.pa.us
Commit 4518c798 blocks signals for a short region of code, but it
assumed that whatever called it had the signal mask set to UnBlockSig on
entry. That may be true today (or may even not be, in extensions in the
wild), but it would be better not to make that assumption. We should
save-and-restore the caller's signal mask.
The PG_SETMASK() portability macro couldn't be used for that, which is
why it wasn't done before. But... considering that commit a65e0864
established back in 9.6 that supported POSIX systems have sigprocmask(),
and that this is POSIX-only code, there is no reason not to use standard
sigprocmask() directly to achieve that.
Back-patch to all supported releases, like 4518c798 and 80845b7c.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGKx6Biq7_UuV0kn9DW%2B8QWcpJC1qwhizdtD9tN-fn0H0g%40mail.gmail.com
Commit 4518c798 intended to block signals in regular backends that
allocate DSM segments, but dsm_impl_resize() is also reached by
dsm_postmaster_startup(). It's not OK to clobber the postmaster's
signal mask, so only manipulate the signal mask when under the
postmaster.
Back-patch to all releases, like 4518c798.
Discussion: https://postgr.es/m/CA%2BhUKGKNpK%3D2OMeea_AZwpLg7Bm4%3DgYWk7eDjZ5F6YbozfOf8w%40mail.gmail.com
On Linux, we call posix_fallocate() on shm_open()'d memory to avoid
later potential SIGBUS (see commit 899bd785).
Based on field reports of systems stuck in an EINTR retry loop there,
there, we made it possible to break out of that loop via slightly odd
coding where the CHECK_FOR_INTERRUPTS() call was somewhat removed from
the loop (see commit 422952ee).
On further reflection, that was not a great choice for at least two
reasons:
1. If interrupts were held, the CHECK_FOR_INTERRUPTS() would do nothing
and the EINTR error would be surfaced to the user.
2. If EINTR was reported but neither QueryCancelPending nor
ProcDiePending was set, then we'd dutifully retry, but with a bit more
understanding of how posix_fallocate() works, it's now clear that you
can get into a loop that never terminates. posix_fallocate() is not a
function that can do some of the job and tell you about progress if it's
interrupted, it has to undo what it's done so far and report EINTR, and
if signals keep arriving faster than it can complete (cf recovery
conflict signals), you're stuck.
Therefore, for now, we'll simply block most signals to guarantee
progress. SIGQUIT is not blocked (see InitPostmasterChild()), because
its expected handler doesn't return, and unblockable signals like
SIGCONT are not expected to arrive at a high rate. For good measure,
we'll include the ftruncate() call in the blocked region, and add a
retry loop.
Back-patch to all supported releases.
Reported-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Nicola Contu <nicola.contu@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220701154105.jjfutmngoedgiad3%40alvherre.pgsql
When you hit ^C, the terminal driver in Unix-like systems echoes "^C" as
well as sending an interrupt signal (depending on stty settings). At
least libedit (but maybe also libreadline) is then confused about the
current cursor location, and corrupts the display if you try to scroll
back. Fix, by moving to a new line before the next prompt is displayed.
Back-patch to all supported released.
Author: Pavel Stehule <pavel.stehule@gmail.com>
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/3278793.1626198638%40sss.pgh.pa.us
When locking a specific named relation for a FOR [KEY] UPDATE/SHARE
clause, transformLockingClause() finds the relation to lock by
scanning the rangetable for an RTE with a matching eref->aliasname.
However, it failed to account for the visibility rules of a join RTE.
If a join RTE doesn't have a user-supplied alias, it will have a
generated eref->aliasname of "unnamed_join" that is not visible as a
relation name in the parse namespace. Such an RTE needs to be skipped,
otherwise it might be found in preference to a regular base relation
with a user-supplied alias of "unnamed_join", preventing it from being
locked.
In addition, if a join RTE doesn't have a user-supplied alias, but
does have a join_using_alias, then the RTE needs to be matched using
that alias rather than the generated eref->aliasname, otherwise a
misleading "relation not found" error will be reported rather than a
"join cannot be locked" error.
Backpatch all the way, except for the second part which only goes back
to 14, where JOIN USING aliases were added.
Dean Rasheed, reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAEZATCUY_KOBnqxbTSPf=7fz9HWPnZ5Xgb9SwYzZ8rFXe7nb=w@mail.gmail.com
Per buildfarm member prairiedog, this platform rejects uninitialized
global variables in shared libraries. Back-patch to v10, like the
addition of the variable.
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/20220703030619.GB2378460@rfd.leadboat.com
ecpglib has been calling it once per SQL query and once per EXEC SQL GET
DESCRIPTOR. Instead, if newlocale() has not succeeded before, call it
while establishing a connection. This mitigates three problems:
- If newlocale() failed in EXEC SQL GET DESCRIPTOR, the command silently
proceeded without the intended locale change.
- On AIX, each newlocale()+freelocale() cycle leaked memory.
- newlocale() CPU usage may have been nontrivial.
Fail the connection attempt if newlocale() fails. Rearrange
ecpg_do_prologue() to validate the connection before its uselocale().
The sort of program that may regress is one running in an environment
where newlocale() fails. If that program establishes connections
without running SQL statements, it will stop working in response to this
change. I'm betting against the importance of such an ECPG use case.
Most SQL execution (any using ECPGdo()) has long required newlocale()
success, so there's little a connection could do without newlocale().
Back-patch to v10 (all supported versions).
Reviewed by Tom Lane. Reported by Guillaume Lelarge.
Discussion: https://postgr.es/m/20220101074055.GA54621@rfd.leadboat.com
Previously, we trusted the OS not to report EEXIST unless we'd passed in
IPC_CREAT | IPC_EXCL or O_CREAT | O_EXCL, as appropriate. Solaris's
shm_open() can in fact do that, causing us to crash because we didn't
ereport and then we blithely assumed the mapping was successful.
Let's treat EEXIST just like any other error, unless we're actually
trying to create a new segment. This applies to shm_open(), where this
behavior has been seen, and also to the equivalent operations for our
sysv and mmap modes just on principle.
Based on the underlying reason for the error, namely contention on a
lock file managed by Solaris librt for each distinct name, this problem
is only likely to happen on 15 and later, because the new shared memory
stats system produces shm_open() calls for the same path from
potentially large numbers of backends concurrently during
authentication. Earlier releases only shared memory segments between a
small number of parallel workers under one Gather node. You could
probably hit it if you tried hard enough though, and we should have been
more defensive in the first place. Therefore, back-patch to all
supported releases.
Per build farm animal margay. This isn't the end of the story, though,
it just changes random crashes into random "File exists" errors; more
work needed for a green build farm.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGKqKrCV5xKWfh9rnm%3Do%3DDwZLTLtnsj_XpUi9g5%3DV%2B9oyg%40mail.gmail.com
TransactionIdIsInProgress had a fast path to return 'false' if the
single-item CLOG cache said that the transaction was known to be
committed. However, that was wrong, because a transaction is first
marked as committed in the CLOG but doesn't become visible to others
until it has removed its XID from the proc array. That could lead to an
error:
ERROR: t_xmin is uncommitted in tuple to be updated
or for an UPDATE to go ahead without blocking, before the previous
UPDATE on the same row was made visible.
The window is usually very short, but synchronous replication makes it
much wider, because the wait for synchronous replica happens in that
window.
Another thing that makes it hard to hit is that it's hard to get such
a commit-in-progress transaction into the single item CLOG cache.
Normally, if you call TransactionIdIsInProgress on such a transaction,
it determines that the XID is in progress without checking the CLOG
and without populating the cache. One way to prime the cache is to
explicitly call pg_xact_status() on the XID. Another way is to use a
lot of subtransactions, so that the subxid cache in the proc array is
overflown, making TransactionIdIsInProgress rely on pg_subtrans and
CLOG checks.
This has been broken ever since it was introduced in 2008, but the race
condition is very hard to hit, especially without synchronous
replication. There were a couple of reports of the error starting from
summer 2021, but no one was able to find the root cause then.
TransactionIdIsKnownCompleted() is now unused. In 'master', remove it,
but I left it in place in backbranches in case it's used by extensions.
Also change pg_xact_status() to check TransactionIdIsInProgress().
Previously, it only checked the CLOG, and returned "committed" before
the transaction was actually made visible to other queries. Note that
this also means that you cannot use pg_xact_status() to reproduce the
bug anymore, even if the code wasn't fixed.
Report and analysis by Konstantin Knizhnik. Patch by Simon Riggs, with
the pg_xact_status() change added by me.
Author: Simon Riggs
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/flat/4da7913d-398c-e2ad-d777-f752cf7f0bbb%40garret.ru
This Perl segfaults if a declaration of the to-be-aliased package
precedes the aliasing itself. Per buildfarm members lapwing and wrasse.
Like commit 20911775de4ab7ac3ecc68bd714cb3ed0fd68b6a, back-patch to v10
(all supported versions).
Discussion: https://postgr.es/m/20220625171533.GA2012493@rfd.leadboat.com
Commit a117cebd638dd02e5c2e791c25e43745f233111b used the original userid
for ACL checks located directly in DefineIndex(), but it still adopted
the table owner userid for more ACL checks than intended. That broke
dump/reload of indexes that refer to an operator class, collation, or
exclusion operator in a schema other than "public" or "pg_catalog".
Back-patch to v10 (all supported versions), like the earlier commit.
Nathan Bossart and Noah Misch
Discussion: https://postgr.es/m/f8a4105f076544c180a87ef0c4822352@stmuk.bayern.de
Remove the need to edit back-branch-specific code sites when
back-patching the addition of a PostgreSQL::Test::Utils symbol. Replace
per-symbol, incomplete alias lists. Give old and new package names the
same EXPORT and EXPORT_OK semantics. Back-patch to v10 (all supported
versions).
Reviewed by Andrew Dunstan.
Discussion: https://postgr.es/m/20220622072144.GD4167527@rfd.leadboat.com
When rebuilding the relation mapping on subscribers, we were not releasing
the attribute mapping's memory which was no longer required.
The attribute mapping used in logical tuple conversion was refactored in
PG13 (by commit e1551f96e6) but we forgot to update the related code that
frees the attribute map.
Author: Hou Zhijie
Reviewed-by: Amit Langote, Amit Kapila, Shi yu
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/OSZPR01MB6310F46CD425A967E4AEF736FDA49@OSZPR01MB6310.jpnprd01.prod.outlook.com
If an application executed operations like EXEC SQL PREPARE
without having first established a database connection, it could
get a core dump instead of the expected clean failure. This
occurred because we did "pthread_getspecific(actual_connection_key)"
without ever having initialized the TSD key actual_connection_key.
The results of that are probably platform-specific, but at least
on Linux it often leads to a crash.
To fix, add calls to ecpg_pthreads_init() in the code paths that
might use actual_connection_key uninitialized. It's harmless
(and hopefully inexpensive) to do that more than once.
Per bug #17514 from Okano Naoki. The problem's ancient, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/17514-edd4fad547c5692c@postgresql.org
The previous wording was "the underlying data type's default collation
is used", which is wrong or at least misleading. The domain inherits
the base type's collation behavior, which if "default" actually can
mean that we use some non-default collation obtained from elsewhere.
Per complaint from Jian He.
Discussion: https://postgr.es/m/CACJufxHMR8_4WooDPjjvEdaxB2hQ5a49qthci8fpKP0MKemVRQ@mail.gmail.com
This reverts commits a04ccf6df et al. in the back branches only.
There was some disagreement already over whether to back-patch
157f8739a, on the grounds that it is the sort of behavioral
change that we don't like to back-patch. Furthermore, it now
looks like the logic needs some more work, which we don't have
time for before the upcoming 14.4 release. Revert for now, and
perhaps reconsider later.
Discussion: https://postgr.es/m/17504-76b68018e130415e@postgresql.org
pg_stat_get_subscription scanned one more LogicalRepWorker array entry
than is really allocated. In the worst case this could lead to SIGSEGV,
if the LogicalRepCtx data structure is near the end of shared memory.
That seems quite unlikely though (thanks to the ordering of calls in
CreateSharedMemoryAndSemaphores) and we've heard no field reports of it.
A more likely misbehavior is one row of garbage data in the function's
result, but even that is not real likely because of the check that the
pid field matches some live backend.
Report and fix by Kuntal Ghosh. This bug is old, so back-patch
to all supported branches.
Discussion: https://postgr.es/m/CAGz5QCJykEDzW6jQK6Yz7Qh_PMtD=95de_7QoocbVR2Qy8hWZA@mail.gmail.com
An error PGresult generated by libpq itself, such as a report of
connection loss, won't have broken-down error fields.
ecpg_raise_backend() blithely assumed that PG_DIAG_MESSAGE_PRIMARY
would always be present, and would end up passing a NULL string
pointer to snprintf when it isn't. That would typically crash
before 3779ac62d, and it would fail to provide a useful error report
in any case. Best practice is to substitute PQerrorMessage(conn)
in such cases, so do that.
Per bug #17421 from Masayuki Hirose. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17421-790ff887e3188874@postgresql.org
psql --single-transaction is able to handle multiple -c and -f switches
in a single transaction since d5563d7d, but this had the surprising
behavior of forcing a transaction COMMIT even if psql failed with an
error in the client (for example incorrect path given to \copy), which
would generate an error, but still commit any changes that were already
applied in the backend. This commit makes the behavior more consistent,
by enforcing a transaction ROLLBACK if any commands fail, both
client-side and backend-side, so as no changes are applied if one error
happens in any of them.
Some tests are added on HEAD to provide some coverage about all that.
Backend-side errors are unreliable as IPC::Run can complain on SIGPIPE
if psql quits before reading a query result, but that should work
properly in the case where any errors come from psql itself, which is
what the original report is about.
Reported-by: Christoph Berg
Author: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/17504-76b68018e130415e@postgresql.org
Backpatch-through: 10
If you have a publication that specifies FOR ALL TABLES clause, a REFRESH
MATERIALIZED VIEW can break your setup with the following message
ERROR: logical replication target relation "public.pg_temp_NNN" does not exist
Commit 1a499c2520 introduces a heuristic to skip table writes that look
like they are from a heap rewrite for a FOR ALL TABLES publication.
However, it forgot to exclude materialized views (heap rewrites occur when
you execute REFRESH MATERIALIZED VIEW). Since materialized views are not
supported in logical decoding, it is appropriate to filter them too.
As explained in the commit 1a499c2520, a more robust solution was included
in version 11 (commit 325f2ec555), hence only version 10 is affected.
Reported-by: Euler Taveira
Author: Euler Taveira
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/bc557ebe-92dc-4afa-b6bb-285a9eeaa614@www.fastmail.com
Since a117cebd6, some older gcc versions issue "variable may be used
uninitialized in this function" complaints for brin_summarize_range.
Silence that using the same coding pattern as in bt_index_check_internal;
arguably, a117cebd6 had too narrow a view of which compilers might give
trouble.
Nathan Bossart and Tom Lane. Back-patch as the previous commit was.
Discussion: https://postgr.es/m/20220601163537.GA2331988@nathanxps13
Perl 5.36 has reclassified the warning condition that this test
case used, so that the expected error fails to appear. Tweak
the test so it instead exercises a case that's handled the same
way in all Perl versions of interest.
This appears to meet our standards for back-patching into
out-of-support branches: it changes no user-visible behavior
but enables testing of old branches with newer tools.
Hence, back-patch as far as 9.2.
Dagfinn Ilmari Mannsåker, per report from Jitka Plesníková.
Discussion: https://postgr.es/m/564579.1654093326@sss.pgh.pa.us
We hadn't noticed this because (a) few people feed invalid
timezone abbreviation files to the server, and (b) in typical
scenarios guc.c would throw ereport(ERROR) and then transaction
abort handling would silently clean up the leaked file reference.
However, it was possible to observe file leakage warnings if one
breaks an already-active abbreviation file, because guc.c does
not throw ERROR when loading supposedly-validated settings during
session start or SIGHUP processing.
Report and fix by Kyotaro Horiguchi (cosmetic adjustments by me)
Discussion: https://postgr.es/m/20220530.173740.748502979257582392.horikyota.ntt@gmail.com
runtime.sgml contains a passing reference to the minimum server
version that pg_dump[all] can dump from. That was 7.0 for many
years, but when 64f3524e2 raised it to 8.0, we missed updating this
bit. Then when 30e7c175b raised it to 9.2, we missed it again.
Given that track record, I'm not too hopeful that we'll remember
to fix this in future changes ... but for now, make the docs match
reality in each branch.
Noted by Daniel Westermann.
Discussion: https://postgr.es/m/GV0P278MB041917EB3E2FE8704B5AE2C6D2DC9@GV0P278MB0419.CHEP278.PROD.OUTLOOK.COM
The information generated when track_activities is accessible to
superusers, roles with the privileges of pg_read_all_stats, as well as
roles one has the privileges of. The original text did not outline the
last point, while the change done in ac1ae47 was unclear about the
second point.
Per discussion with Nathan Bossart.
Discussion: https://postgr.es/m/20220521185743.GA886636@nathanxps13
Backpatch-through: 10
If a short description is specified as NULL in one of the various
DefineCustomXXXVariable() functions available to external modules to
define a custom parameter, SHOW ALL would crash. This change teaches
SHOW ALL to properly handle NULL short descriptions, as well as any code
paths that manipulate it, to gain in flexibility. Note that
help_config.c was already able to do that, when describing a set of GUCs
for postgres --describe-config.
Author: Steve Chavez
Reviewed by: Nathan Bossart, Andres Freund, Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/CAGRrpzY6hO-Kmykna_XvsTv8P2DshGiU6G3j8yGao4mk0CqjHA%40mail.gmail.com
Backpatch-through: 10
Commits a59c79564 et al. tried to sync libpq's SSL key file
permissions checks with what we've used for years in the backend.
We did not intend to create any new failure cases, but it turns out
we did: restricting the key file's ownership breaks cases where the
client is allowed to read a key file despite not having the identical
UID. In particular a client running as root used to be able to read
someone else's key file; and having seen that I suspect that there are
other, less-dubious use cases that this restriction breaks on some
platforms.
We don't really need an ownership check, since if we can read the key
file despite its having restricted permissions, it must have the right
ownership --- under normal conditions anyway, and the point of this
patch is that any additional corner cases where that works should be
deemed allowable, as they have been historically. Hence, just drop
the ownership check, and rearrange the permissions check to get rid
of its faulty assumption that geteuid() can't be zero. (Note that the
comparable backend-side code doesn't have to cater for geteuid() == 0,
since the server rejects that very early on.)
This does have the end result that the permissions safety check used
for a root user's private key file is weaker than that used for
anyone else's. While odd, root really ought to know what she's doing
with file permissions, so I think this is acceptable.
Per report from Yogendra Suralkar. Like the previous patch,
back-patch to all supported branches.
Discussion: https://postgr.es/m/MW3PR15MB3931DF96896DC36D21AFD47CA3D39@MW3PR15MB3931.namprd15.prod.outlook.com
Foreign tables can be partitioned, but previous documentation commits
left the syntax synopsis both incomplete and incorrect.
Justin Pryzby and Amit Langote
Discussion: http://postgr.es/m/20220521130922.GX19626@telsasoft.com
ruleutils.c was coded to suppress the AS label for a SELECT output
expression if the column name is "?column?", which is the parser's
fallback if it can't think of something better. This is fine, and
avoids ugly clutter, so long as (1) nothing further up in the parse
tree relies on that column name or (2) the same fallback would be
assigned when the rule or view definition is reloaded. Unfortunately
(2) is far from certain, both because ruleutils.c might print the
expression in a different form from how it was originally written
and because FigureColname's rules might change in future releases.
So we shouldn't rely on that.
Detecting exactly whether there is any outer-level use of a SELECT
column name would be rather expensive. This patch takes the simpler
approach of just passing down a flag indicating whether there *could*
be any outer use; for example, the output column names of a SubLink
are not referenceable, and we also do not care about the names exposed
by the right-hand side of a setop. This is sufficient to suppress
unwanted clutter in all but one case in the regression tests. That
seems like reasonable evidence that it won't be too much in users'
faces, while still fixing the cases we need to fix.
Per bug #17486 from Nicolas Lutic. This issue is ancient, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/17486-1ad6fd786728b8af@postgresql.org
