postgresql/contrib/pgcrypto/pgp-info.c

236 lines
4.8 KiB
C
Raw Normal View History

/*
* pgp-info.c
* Provide info about PGP data.
*
* Copyright (c) 2005 Marko Kreen
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
2010-09-21 04:08:53 +08:00
* contrib/pgcrypto/pgp-info.c
*/
#include "postgres.h"
#include "px.h"
#include "mbuf.h"
#include "pgp.h"
2005-10-15 10:49:52 +08:00
static int
read_pubkey_keyid(PullFilter *pkt, uint8 *keyid_buf)
{
2005-10-15 10:49:52 +08:00
int res;
The large one adds support for RSA keys and reorganizes the pubkey functions a bit. The actual RSA-specific code there is tiny, most of the patch consists of reorg of the pubkey code, as lots of it was written as elgamal-only. --------------------------------------------------------------------------- The SHLIB section was copy-pasted from somewhere and contains several unnecessary libs. This cleans it up a bit. -lcrypt we don't use system crypt() -lssl, -lssleay32 no SSL here -lz in win32 section already added on previous line -ldes The chance anybody has it is pretty low. And the chance pgcrypto works with it is even lower. Also trim the win32 section. --------------------------------------------------------------------------- It is already disabled in Makefile, remove code too. --------------------------------------------------------------------------- I was bit hasty making the random exponent 'k' a prime. Further researh shows that Elgamal encryption has no specific needs in respect to k, any random number is fine. It is bit different for signing, there it needs to be 'relatively prime' to p - 1, that means GCD(k, p-1) == 1, which is also a lot lighter than full primality. As we don't do signing, this can be ignored. This brings major speedup to Elgamal encryption. --------------------------------------------------------------------------- o pgp_mpi_free: Accept NULLs o pgp_mpi_cksum: result should be 16bit o Remove function name from error messages - to be similar to other SQL functions, and it does not match anyway the called function o remove couple junk lines --------------------------------------------------------------------------- o Support for RSA encryption o Big reorg to better separate generic and algorithm-specific code. o Regression tests for RSA. --------------------------------------------------------------------------- o Tom stuck a CVS id into file. I doubt the usefulness of it, but if it needs to be in the file then rather at the end. Also tag it as comment for asciidoc. o Mention bytea vs. text difference o Couple clarifications --------------------------------------------------------------------------- There is a choice whether to update it with pgp functions or remove it. I decided to remove it, updating is pointless. I've tried to keep the core of pgcrypto relatively independent from main PostgreSQL, to make it easy to use externally if needed, and that is good. Eg. that made development of PGP functions much nicer. But I have no plans to release it as generic library, so keeping such doc up-to-date is waste of time. If anyone is interested in using it in other products, he can probably bother to read the source too. Commented source is another thing - I'll try to make another pass over code to see if there is anything non-obvious that would need more comments. --------------------------------------------------------------------------- Marko Kreen
2005-08-13 10:06:21 +08:00
PGP_PubKey *pk = NULL;
The large one adds support for RSA keys and reorganizes the pubkey functions a bit. The actual RSA-specific code there is tiny, most of the patch consists of reorg of the pubkey code, as lots of it was written as elgamal-only. --------------------------------------------------------------------------- The SHLIB section was copy-pasted from somewhere and contains several unnecessary libs. This cleans it up a bit. -lcrypt we don't use system crypt() -lssl, -lssleay32 no SSL here -lz in win32 section already added on previous line -ldes The chance anybody has it is pretty low. And the chance pgcrypto works with it is even lower. Also trim the win32 section. --------------------------------------------------------------------------- It is already disabled in Makefile, remove code too. --------------------------------------------------------------------------- I was bit hasty making the random exponent 'k' a prime. Further researh shows that Elgamal encryption has no specific needs in respect to k, any random number is fine. It is bit different for signing, there it needs to be 'relatively prime' to p - 1, that means GCD(k, p-1) == 1, which is also a lot lighter than full primality. As we don't do signing, this can be ignored. This brings major speedup to Elgamal encryption. --------------------------------------------------------------------------- o pgp_mpi_free: Accept NULLs o pgp_mpi_cksum: result should be 16bit o Remove function name from error messages - to be similar to other SQL functions, and it does not match anyway the called function o remove couple junk lines --------------------------------------------------------------------------- o Support for RSA encryption o Big reorg to better separate generic and algorithm-specific code. o Regression tests for RSA. --------------------------------------------------------------------------- o Tom stuck a CVS id into file. I doubt the usefulness of it, but if it needs to be in the file then rather at the end. Also tag it as comment for asciidoc. o Mention bytea vs. text difference o Couple clarifications --------------------------------------------------------------------------- There is a choice whether to update it with pgp functions or remove it. I decided to remove it, updating is pointless. I've tried to keep the core of pgcrypto relatively independent from main PostgreSQL, to make it easy to use externally if needed, and that is good. Eg. that made development of PGP functions much nicer. But I have no plans to release it as generic library, so keeping such doc up-to-date is waste of time. If anyone is interested in using it in other products, he can probably bother to read the source too. Commented source is another thing - I'll try to make another pass over code to see if there is anything non-obvious that would need more comments. --------------------------------------------------------------------------- Marko Kreen
2005-08-13 10:06:21 +08:00
res = _pgp_read_public_key(pkt, &pk);
if (res < 0)
goto err;
The large one adds support for RSA keys and reorganizes the pubkey functions a bit. The actual RSA-specific code there is tiny, most of the patch consists of reorg of the pubkey code, as lots of it was written as elgamal-only. --------------------------------------------------------------------------- The SHLIB section was copy-pasted from somewhere and contains several unnecessary libs. This cleans it up a bit. -lcrypt we don't use system crypt() -lssl, -lssleay32 no SSL here -lz in win32 section already added on previous line -ldes The chance anybody has it is pretty low. And the chance pgcrypto works with it is even lower. Also trim the win32 section. --------------------------------------------------------------------------- It is already disabled in Makefile, remove code too. --------------------------------------------------------------------------- I was bit hasty making the random exponent 'k' a prime. Further researh shows that Elgamal encryption has no specific needs in respect to k, any random number is fine. It is bit different for signing, there it needs to be 'relatively prime' to p - 1, that means GCD(k, p-1) == 1, which is also a lot lighter than full primality. As we don't do signing, this can be ignored. This brings major speedup to Elgamal encryption. --------------------------------------------------------------------------- o pgp_mpi_free: Accept NULLs o pgp_mpi_cksum: result should be 16bit o Remove function name from error messages - to be similar to other SQL functions, and it does not match anyway the called function o remove couple junk lines --------------------------------------------------------------------------- o Support for RSA encryption o Big reorg to better separate generic and algorithm-specific code. o Regression tests for RSA. --------------------------------------------------------------------------- o Tom stuck a CVS id into file. I doubt the usefulness of it, but if it needs to be in the file then rather at the end. Also tag it as comment for asciidoc. o Mention bytea vs. text difference o Couple clarifications --------------------------------------------------------------------------- There is a choice whether to update it with pgp functions or remove it. I decided to remove it, updating is pointless. I've tried to keep the core of pgcrypto relatively independent from main PostgreSQL, to make it easy to use externally if needed, and that is good. Eg. that made development of PGP functions much nicer. But I have no plans to release it as generic library, so keeping such doc up-to-date is waste of time. If anyone is interested in using it in other products, he can probably bother to read the source too. Commented source is another thing - I'll try to make another pass over code to see if there is anything non-obvious that would need more comments. --------------------------------------------------------------------------- Marko Kreen
2005-08-13 10:06:21 +08:00
/* skip secret key part, if it exists */
res = pgp_skip_packet(pkt);
if (res < 0)
goto err;
The large one adds support for RSA keys and reorganizes the pubkey functions a bit. The actual RSA-specific code there is tiny, most of the patch consists of reorg of the pubkey code, as lots of it was written as elgamal-only. --------------------------------------------------------------------------- The SHLIB section was copy-pasted from somewhere and contains several unnecessary libs. This cleans it up a bit. -lcrypt we don't use system crypt() -lssl, -lssleay32 no SSL here -lz in win32 section already added on previous line -ldes The chance anybody has it is pretty low. And the chance pgcrypto works with it is even lower. Also trim the win32 section. --------------------------------------------------------------------------- It is already disabled in Makefile, remove code too. --------------------------------------------------------------------------- I was bit hasty making the random exponent 'k' a prime. Further researh shows that Elgamal encryption has no specific needs in respect to k, any random number is fine. It is bit different for signing, there it needs to be 'relatively prime' to p - 1, that means GCD(k, p-1) == 1, which is also a lot lighter than full primality. As we don't do signing, this can be ignored. This brings major speedup to Elgamal encryption. --------------------------------------------------------------------------- o pgp_mpi_free: Accept NULLs o pgp_mpi_cksum: result should be 16bit o Remove function name from error messages - to be similar to other SQL functions, and it does not match anyway the called function o remove couple junk lines --------------------------------------------------------------------------- o Support for RSA encryption o Big reorg to better separate generic and algorithm-specific code. o Regression tests for RSA. --------------------------------------------------------------------------- o Tom stuck a CVS id into file. I doubt the usefulness of it, but if it needs to be in the file then rather at the end. Also tag it as comment for asciidoc. o Mention bytea vs. text difference o Couple clarifications --------------------------------------------------------------------------- There is a choice whether to update it with pgp functions or remove it. I decided to remove it, updating is pointless. I've tried to keep the core of pgcrypto relatively independent from main PostgreSQL, to make it easy to use externally if needed, and that is good. Eg. that made development of PGP functions much nicer. But I have no plans to release it as generic library, so keeping such doc up-to-date is waste of time. If anyone is interested in using it in other products, he can probably bother to read the source too. Commented source is another thing - I'll try to make another pass over code to see if there is anything non-obvious that would need more comments. --------------------------------------------------------------------------- Marko Kreen
2005-08-13 10:06:21 +08:00
/* is it encryption key */
switch (pk->algo)
{
The large one adds support for RSA keys and reorganizes the pubkey functions a bit. The actual RSA-specific code there is tiny, most of the patch consists of reorg of the pubkey code, as lots of it was written as elgamal-only. --------------------------------------------------------------------------- The SHLIB section was copy-pasted from somewhere and contains several unnecessary libs. This cleans it up a bit. -lcrypt we don't use system crypt() -lssl, -lssleay32 no SSL here -lz in win32 section already added on previous line -ldes The chance anybody has it is pretty low. And the chance pgcrypto works with it is even lower. Also trim the win32 section. --------------------------------------------------------------------------- It is already disabled in Makefile, remove code too. --------------------------------------------------------------------------- I was bit hasty making the random exponent 'k' a prime. Further researh shows that Elgamal encryption has no specific needs in respect to k, any random number is fine. It is bit different for signing, there it needs to be 'relatively prime' to p - 1, that means GCD(k, p-1) == 1, which is also a lot lighter than full primality. As we don't do signing, this can be ignored. This brings major speedup to Elgamal encryption. --------------------------------------------------------------------------- o pgp_mpi_free: Accept NULLs o pgp_mpi_cksum: result should be 16bit o Remove function name from error messages - to be similar to other SQL functions, and it does not match anyway the called function o remove couple junk lines --------------------------------------------------------------------------- o Support for RSA encryption o Big reorg to better separate generic and algorithm-specific code. o Regression tests for RSA. --------------------------------------------------------------------------- o Tom stuck a CVS id into file. I doubt the usefulness of it, but if it needs to be in the file then rather at the end. Also tag it as comment for asciidoc. o Mention bytea vs. text difference o Couple clarifications --------------------------------------------------------------------------- There is a choice whether to update it with pgp functions or remove it. I decided to remove it, updating is pointless. I've tried to keep the core of pgcrypto relatively independent from main PostgreSQL, to make it easy to use externally if needed, and that is good. Eg. that made development of PGP functions much nicer. But I have no plans to release it as generic library, so keeping such doc up-to-date is waste of time. If anyone is interested in using it in other products, he can probably bother to read the source too. Commented source is another thing - I'll try to make another pass over code to see if there is anything non-obvious that would need more comments. --------------------------------------------------------------------------- Marko Kreen
2005-08-13 10:06:21 +08:00
case PGP_PUB_ELG_ENCRYPT:
case PGP_PUB_RSA_ENCRYPT:
case PGP_PUB_RSA_ENCRYPT_SIGN:
memcpy(keyid_buf, pk->key_id, 8);
res = 1;
break;
default:
res = 0;
}
The large one adds support for RSA keys and reorganizes the pubkey functions a bit. The actual RSA-specific code there is tiny, most of the patch consists of reorg of the pubkey code, as lots of it was written as elgamal-only. --------------------------------------------------------------------------- The SHLIB section was copy-pasted from somewhere and contains several unnecessary libs. This cleans it up a bit. -lcrypt we don't use system crypt() -lssl, -lssleay32 no SSL here -lz in win32 section already added on previous line -ldes The chance anybody has it is pretty low. And the chance pgcrypto works with it is even lower. Also trim the win32 section. --------------------------------------------------------------------------- It is already disabled in Makefile, remove code too. --------------------------------------------------------------------------- I was bit hasty making the random exponent 'k' a prime. Further researh shows that Elgamal encryption has no specific needs in respect to k, any random number is fine. It is bit different for signing, there it needs to be 'relatively prime' to p - 1, that means GCD(k, p-1) == 1, which is also a lot lighter than full primality. As we don't do signing, this can be ignored. This brings major speedup to Elgamal encryption. --------------------------------------------------------------------------- o pgp_mpi_free: Accept NULLs o pgp_mpi_cksum: result should be 16bit o Remove function name from error messages - to be similar to other SQL functions, and it does not match anyway the called function o remove couple junk lines --------------------------------------------------------------------------- o Support for RSA encryption o Big reorg to better separate generic and algorithm-specific code. o Regression tests for RSA. --------------------------------------------------------------------------- o Tom stuck a CVS id into file. I doubt the usefulness of it, but if it needs to be in the file then rather at the end. Also tag it as comment for asciidoc. o Mention bytea vs. text difference o Couple clarifications --------------------------------------------------------------------------- There is a choice whether to update it with pgp functions or remove it. I decided to remove it, updating is pointless. I've tried to keep the core of pgcrypto relatively independent from main PostgreSQL, to make it easy to use externally if needed, and that is good. Eg. that made development of PGP functions much nicer. But I have no plans to release it as generic library, so keeping such doc up-to-date is waste of time. If anyone is interested in using it in other products, he can probably bother to read the source too. Commented source is another thing - I'll try to make another pass over code to see if there is anything non-obvious that would need more comments. --------------------------------------------------------------------------- Marko Kreen
2005-08-13 10:06:21 +08:00
err:
pgp_key_free(pk);
return res;
}
2005-10-15 10:49:52 +08:00
static int
read_pubenc_keyid(PullFilter *pkt, uint8 *keyid_buf)
{
2005-10-15 10:49:52 +08:00
uint8 ver;
int res;
GETBYTE(pkt, ver);
if (ver != 3)
return -1;
res = pullf_read_fixed(pkt, 8, keyid_buf);
if (res < 0)
return res;
return pgp_skip_packet(pkt);
}
static const char hextbl[] = "0123456789ABCDEF";
static int
print_key(uint8 *keyid, char *dst)
{
2005-10-15 10:49:52 +08:00
int i;
unsigned c;
for (i = 0; i < 8; i++)
{
c = keyid[i];
*dst++ = hextbl[(c >> 4) & 0x0F];
*dst++ = hextbl[c & 0x0F];
}
*dst = 0;
2005-10-15 10:49:52 +08:00
return 8 * 2;
}
2005-10-15 10:49:52 +08:00
static const uint8 any_key[] =
{0, 0, 0, 0, 0, 0, 0, 0};
/*
* dst should have room for 17 bytes
*/
int
pgp_get_keyid(MBuf *pgp_data, char *dst)
{
2005-10-15 10:49:52 +08:00
int res;
PullFilter *src;
PullFilter *pkt = NULL;
2005-10-15 10:49:52 +08:00
int len;
uint8 tag;
int got_pub_key = 0,
got_symenc_key = 0,
got_pubenc_key = 0;
int got_data = 0;
uint8 keyid_buf[8];
int got_main_key = 0;
res = pullf_create_mbuf_reader(&src, pgp_data);
if (res < 0)
return res;
2005-10-15 10:49:52 +08:00
while (1)
{
res = pgp_parse_pkt_hdr(src, &tag, &len, 0);
if (res <= 0)
2005-10-15 10:49:52 +08:00
break;
res = pgp_create_pkt_reader(&pkt, src, len, res, NULL);
if (res < 0)
break;
switch (tag)
{
case PGP_PKT_SECRET_KEY:
case PGP_PKT_PUBLIC_KEY:
The large one adds support for RSA keys and reorganizes the pubkey functions a bit. The actual RSA-specific code there is tiny, most of the patch consists of reorg of the pubkey code, as lots of it was written as elgamal-only. --------------------------------------------------------------------------- The SHLIB section was copy-pasted from somewhere and contains several unnecessary libs. This cleans it up a bit. -lcrypt we don't use system crypt() -lssl, -lssleay32 no SSL here -lz in win32 section already added on previous line -ldes The chance anybody has it is pretty low. And the chance pgcrypto works with it is even lower. Also trim the win32 section. --------------------------------------------------------------------------- It is already disabled in Makefile, remove code too. --------------------------------------------------------------------------- I was bit hasty making the random exponent 'k' a prime. Further researh shows that Elgamal encryption has no specific needs in respect to k, any random number is fine. It is bit different for signing, there it needs to be 'relatively prime' to p - 1, that means GCD(k, p-1) == 1, which is also a lot lighter than full primality. As we don't do signing, this can be ignored. This brings major speedup to Elgamal encryption. --------------------------------------------------------------------------- o pgp_mpi_free: Accept NULLs o pgp_mpi_cksum: result should be 16bit o Remove function name from error messages - to be similar to other SQL functions, and it does not match anyway the called function o remove couple junk lines --------------------------------------------------------------------------- o Support for RSA encryption o Big reorg to better separate generic and algorithm-specific code. o Regression tests for RSA. --------------------------------------------------------------------------- o Tom stuck a CVS id into file. I doubt the usefulness of it, but if it needs to be in the file then rather at the end. Also tag it as comment for asciidoc. o Mention bytea vs. text difference o Couple clarifications --------------------------------------------------------------------------- There is a choice whether to update it with pgp functions or remove it. I decided to remove it, updating is pointless. I've tried to keep the core of pgcrypto relatively independent from main PostgreSQL, to make it easy to use externally if needed, and that is good. Eg. that made development of PGP functions much nicer. But I have no plans to release it as generic library, so keeping such doc up-to-date is waste of time. If anyone is interested in using it in other products, he can probably bother to read the source too. Commented source is another thing - I'll try to make another pass over code to see if there is anything non-obvious that would need more comments. --------------------------------------------------------------------------- Marko Kreen
2005-08-13 10:06:21 +08:00
/* main key is for signing, so ignore it */
if (!got_main_key)
{
got_main_key = 1;
res = pgp_skip_packet(pkt);
}
else
res = PXE_PGP_MULTIPLE_KEYS;
break;
case PGP_PKT_SECRET_SUBKEY:
case PGP_PKT_PUBLIC_SUBKEY:
res = read_pubkey_keyid(pkt, keyid_buf);
if (res < 0)
break;
if (res > 0)
got_pub_key++;
break;
case PGP_PKT_PUBENCRYPTED_SESSKEY:
got_pubenc_key++;
res = read_pubenc_keyid(pkt, keyid_buf);
break;
case PGP_PKT_SYMENCRYPTED_DATA:
case PGP_PKT_SYMENCRYPTED_DATA_MDC:
The large one adds support for RSA keys and reorganizes the pubkey functions a bit. The actual RSA-specific code there is tiny, most of the patch consists of reorg of the pubkey code, as lots of it was written as elgamal-only. --------------------------------------------------------------------------- The SHLIB section was copy-pasted from somewhere and contains several unnecessary libs. This cleans it up a bit. -lcrypt we don't use system crypt() -lssl, -lssleay32 no SSL here -lz in win32 section already added on previous line -ldes The chance anybody has it is pretty low. And the chance pgcrypto works with it is even lower. Also trim the win32 section. --------------------------------------------------------------------------- It is already disabled in Makefile, remove code too. --------------------------------------------------------------------------- I was bit hasty making the random exponent 'k' a prime. Further researh shows that Elgamal encryption has no specific needs in respect to k, any random number is fine. It is bit different for signing, there it needs to be 'relatively prime' to p - 1, that means GCD(k, p-1) == 1, which is also a lot lighter than full primality. As we don't do signing, this can be ignored. This brings major speedup to Elgamal encryption. --------------------------------------------------------------------------- o pgp_mpi_free: Accept NULLs o pgp_mpi_cksum: result should be 16bit o Remove function name from error messages - to be similar to other SQL functions, and it does not match anyway the called function o remove couple junk lines --------------------------------------------------------------------------- o Support for RSA encryption o Big reorg to better separate generic and algorithm-specific code. o Regression tests for RSA. --------------------------------------------------------------------------- o Tom stuck a CVS id into file. I doubt the usefulness of it, but if it needs to be in the file then rather at the end. Also tag it as comment for asciidoc. o Mention bytea vs. text difference o Couple clarifications --------------------------------------------------------------------------- There is a choice whether to update it with pgp functions or remove it. I decided to remove it, updating is pointless. I've tried to keep the core of pgcrypto relatively independent from main PostgreSQL, to make it easy to use externally if needed, and that is good. Eg. that made development of PGP functions much nicer. But I have no plans to release it as generic library, so keeping such doc up-to-date is waste of time. If anyone is interested in using it in other products, he can probably bother to read the source too. Commented source is another thing - I'll try to make another pass over code to see if there is anything non-obvious that would need more comments. --------------------------------------------------------------------------- Marko Kreen
2005-08-13 10:06:21 +08:00
/* don't skip it, just stop */
got_data = 1;
break;
case PGP_PKT_SYMENCRYPTED_SESSKEY:
got_symenc_key++;
/* fallthru */
case PGP_PKT_SIGNATURE:
case PGP_PKT_MARKER:
case PGP_PKT_TRUST:
case PGP_PKT_USER_ID:
case PGP_PKT_USER_ATTR:
case PGP_PKT_PRIV_61:
res = pgp_skip_packet(pkt);
break;
default:
res = PXE_PGP_CORRUPT_DATA;
}
if (pkt)
pullf_free(pkt);
pkt = NULL;
if (res < 0 || got_data)
break;
}
pullf_free(src);
if (pkt)
pullf_free(pkt);
if (res < 0)
return res;
/* now check sanity */
if (got_pub_key && got_pubenc_key)
res = PXE_PGP_CORRUPT_DATA;
if (got_pub_key > 1)
The large one adds support for RSA keys and reorganizes the pubkey functions a bit. The actual RSA-specific code there is tiny, most of the patch consists of reorg of the pubkey code, as lots of it was written as elgamal-only. --------------------------------------------------------------------------- The SHLIB section was copy-pasted from somewhere and contains several unnecessary libs. This cleans it up a bit. -lcrypt we don't use system crypt() -lssl, -lssleay32 no SSL here -lz in win32 section already added on previous line -ldes The chance anybody has it is pretty low. And the chance pgcrypto works with it is even lower. Also trim the win32 section. --------------------------------------------------------------------------- It is already disabled in Makefile, remove code too. --------------------------------------------------------------------------- I was bit hasty making the random exponent 'k' a prime. Further researh shows that Elgamal encryption has no specific needs in respect to k, any random number is fine. It is bit different for signing, there it needs to be 'relatively prime' to p - 1, that means GCD(k, p-1) == 1, which is also a lot lighter than full primality. As we don't do signing, this can be ignored. This brings major speedup to Elgamal encryption. --------------------------------------------------------------------------- o pgp_mpi_free: Accept NULLs o pgp_mpi_cksum: result should be 16bit o Remove function name from error messages - to be similar to other SQL functions, and it does not match anyway the called function o remove couple junk lines --------------------------------------------------------------------------- o Support for RSA encryption o Big reorg to better separate generic and algorithm-specific code. o Regression tests for RSA. --------------------------------------------------------------------------- o Tom stuck a CVS id into file. I doubt the usefulness of it, but if it needs to be in the file then rather at the end. Also tag it as comment for asciidoc. o Mention bytea vs. text difference o Couple clarifications --------------------------------------------------------------------------- There is a choice whether to update it with pgp functions or remove it. I decided to remove it, updating is pointless. I've tried to keep the core of pgcrypto relatively independent from main PostgreSQL, to make it easy to use externally if needed, and that is good. Eg. that made development of PGP functions much nicer. But I have no plans to release it as generic library, so keeping such doc up-to-date is waste of time. If anyone is interested in using it in other products, he can probably bother to read the source too. Commented source is another thing - I'll try to make another pass over code to see if there is anything non-obvious that would need more comments. --------------------------------------------------------------------------- Marko Kreen
2005-08-13 10:06:21 +08:00
res = PXE_PGP_MULTIPLE_KEYS;
if (got_pubenc_key > 1)
The large one adds support for RSA keys and reorganizes the pubkey functions a bit. The actual RSA-specific code there is tiny, most of the patch consists of reorg of the pubkey code, as lots of it was written as elgamal-only. --------------------------------------------------------------------------- The SHLIB section was copy-pasted from somewhere and contains several unnecessary libs. This cleans it up a bit. -lcrypt we don't use system crypt() -lssl, -lssleay32 no SSL here -lz in win32 section already added on previous line -ldes The chance anybody has it is pretty low. And the chance pgcrypto works with it is even lower. Also trim the win32 section. --------------------------------------------------------------------------- It is already disabled in Makefile, remove code too. --------------------------------------------------------------------------- I was bit hasty making the random exponent 'k' a prime. Further researh shows that Elgamal encryption has no specific needs in respect to k, any random number is fine. It is bit different for signing, there it needs to be 'relatively prime' to p - 1, that means GCD(k, p-1) == 1, which is also a lot lighter than full primality. As we don't do signing, this can be ignored. This brings major speedup to Elgamal encryption. --------------------------------------------------------------------------- o pgp_mpi_free: Accept NULLs o pgp_mpi_cksum: result should be 16bit o Remove function name from error messages - to be similar to other SQL functions, and it does not match anyway the called function o remove couple junk lines --------------------------------------------------------------------------- o Support for RSA encryption o Big reorg to better separate generic and algorithm-specific code. o Regression tests for RSA. --------------------------------------------------------------------------- o Tom stuck a CVS id into file. I doubt the usefulness of it, but if it needs to be in the file then rather at the end. Also tag it as comment for asciidoc. o Mention bytea vs. text difference o Couple clarifications --------------------------------------------------------------------------- There is a choice whether to update it with pgp functions or remove it. I decided to remove it, updating is pointless. I've tried to keep the core of pgcrypto relatively independent from main PostgreSQL, to make it easy to use externally if needed, and that is good. Eg. that made development of PGP functions much nicer. But I have no plans to release it as generic library, so keeping such doc up-to-date is waste of time. If anyone is interested in using it in other products, he can probably bother to read the source too. Commented source is another thing - I'll try to make another pass over code to see if there is anything non-obvious that would need more comments. --------------------------------------------------------------------------- Marko Kreen
2005-08-13 10:06:21 +08:00
res = PXE_PGP_MULTIPLE_KEYS;
/*
* if still ok, look what we got
*/
if (res >= 0)
{
if (got_pubenc_key || got_pub_key)
{
if (memcmp(keyid_buf, any_key, 8) == 0)
{
memcpy(dst, "ANYKEY", 7);
res = 6;
}
else
res = print_key(keyid_buf, dst);
}
else if (got_symenc_key)
{
memcpy(dst, "SYMKEY", 7);
res = 6;
}
else
res = PXE_PGP_NO_USABLE_KEY;
}
return res;
}