openssl/apps/spkac.c
Richard Levitte bdd58d9846 Change the way apps open their input and output files
The different apps had the liberty to decide whether they would open their
input and output files in binary mode or not, which could be confusing if
two different apps were handling the same type of file in different ways.

The solution is to centralise the decision of low level file organisation,
and that the apps would use a selection of formats to state the intent of
the file.

Reviewed-by: Tim Hudson <tjh@openssl.org>
2015-09-06 01:35:54 +02:00

238 lines
7.6 KiB
C

/*
* Written by Dr Stephen N Henson (steve@openssl.org) for the OpenSSL project
* 1999. Based on an original idea by Massimiliano Pala (madwolf@openca.org).
*/
/* ====================================================================
* Copyright (c) 1999 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* licensing@OpenSSL.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include "apps.h"
#include <openssl/bio.h>
#include <openssl/conf.h>
#include <openssl/err.h>
#include <openssl/evp.h>
#include <openssl/lhash.h>
#include <openssl/x509.h>
#include <openssl/pem.h>
typedef enum OPTION_choice {
OPT_ERR = -1, OPT_EOF = 0, OPT_HELP,
OPT_NOOUT, OPT_PUBKEY, OPT_VERIFY, OPT_IN, OPT_OUT,
OPT_ENGINE, OPT_KEY, OPT_CHALLENGE, OPT_PASSIN, OPT_SPKAC,
OPT_SPKSECT
} OPTION_CHOICE;
OPTIONS spkac_options[] = {
{"help", OPT_HELP, '-', "Display this summary"},
{"in", OPT_IN, '<', "Input file"},
{"out", OPT_OUT, '>', "Output file"},
{"key", OPT_KEY, '<', "Create SPKAC using private key"},
{"passin", OPT_PASSIN, 's', "Input file pass phrase source"},
{"challenge", OPT_CHALLENGE, 's', "Challenge string"},
{"spkac", OPT_SPKAC, 's', "Alternative SPKAC name"},
{"noout", OPT_NOOUT, '-', "Don't print SPKAC"},
{"pubkey", OPT_PUBKEY, '-', "Output public key"},
{"verify", OPT_VERIFY, '-', "Verify SPKAC signature"},
{"spksect", OPT_SPKSECT, 's'},
#ifndef OPENSSL_NO_ENGINE
{"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"},
#endif
{NULL}
};
int spkac_main(int argc, char **argv)
{
BIO *out = NULL;
CONF *conf = NULL;
ENGINE *e = NULL;
EVP_PKEY *pkey = NULL;
NETSCAPE_SPKI *spki = NULL;
char *challenge = NULL, *keyfile = NULL;
char *infile = NULL, *outfile = NULL, *passinarg = NULL, *passin = NULL;
char *spkstr = NULL, *prog;
const char *spkac = "SPKAC", *spksect = "default";
int i, ret = 1, verify = 0, noout = 0, pubkey = 0;
OPTION_CHOICE o;
prog = opt_init(argc, argv, spkac_options);
while ((o = opt_next()) != OPT_EOF) {
switch (o) {
case OPT_EOF:
case OPT_ERR:
BIO_printf(bio_err, "%s: Use -help for summary.\n", prog);
goto end;
case OPT_HELP:
opt_help(spkac_options);
ret = 0;
goto end;
case OPT_IN:
infile = opt_arg();
break;
case OPT_OUT:
outfile = opt_arg();
break;
case OPT_NOOUT:
noout = 1;
break;
case OPT_PUBKEY:
pubkey = 1;
break;
case OPT_VERIFY:
verify = 1;
break;
case OPT_PASSIN:
passinarg = opt_arg();
break;
case OPT_KEY:
keyfile = opt_arg();
break;
case OPT_CHALLENGE:
challenge = opt_arg();
break;
case OPT_SPKAC:
spkac = opt_arg();
break;
case OPT_SPKSECT:
spksect = opt_arg();
break;
case OPT_ENGINE:
e = setup_engine(opt_arg(), 0);
break;
}
}
argc = opt_num_rest();
argv = opt_rest();
if (!app_passwd(passinarg, NULL, &passin, NULL)) {
BIO_printf(bio_err, "Error getting password\n");
goto end;
}
if (keyfile) {
pkey = load_key(strcmp(keyfile, "-") ? keyfile : NULL,
FORMAT_PEM, 1, passin, e, "private key");
if (!pkey) {
goto end;
}
spki = NETSCAPE_SPKI_new();
if (challenge)
ASN1_STRING_set(spki->spkac->challenge,
challenge, (int)strlen(challenge));
NETSCAPE_SPKI_set_pubkey(spki, pkey);
NETSCAPE_SPKI_sign(spki, pkey, EVP_md5());
spkstr = NETSCAPE_SPKI_b64_encode(spki);
out = bio_open_default(outfile, 'w', FORMAT_TEXT);
if (out == NULL)
goto end;
BIO_printf(out, "SPKAC=%s\n", spkstr);
OPENSSL_free(spkstr);
ret = 0;
goto end;
}
if ((conf = app_load_config(infile)) == NULL)
goto end;
if (!app_load_modules(conf))
goto end;
spkstr = NCONF_get_string(conf, spksect, spkac);
if (!spkstr) {
BIO_printf(bio_err, "Can't find SPKAC called \"%s\"\n", spkac);
ERR_print_errors(bio_err);
goto end;
}
spki = NETSCAPE_SPKI_b64_decode(spkstr, -1);
if (!spki) {
BIO_printf(bio_err, "Error loading SPKAC\n");
ERR_print_errors(bio_err);
goto end;
}
out = bio_open_default(outfile, 'w', FORMAT_TEXT);
if (out == NULL)
goto end;
if (!noout)
NETSCAPE_SPKI_print(out, spki);
pkey = NETSCAPE_SPKI_get_pubkey(spki);
if (verify) {
i = NETSCAPE_SPKI_verify(spki, pkey);
if (i > 0)
BIO_printf(bio_err, "Signature OK\n");
else {
BIO_printf(bio_err, "Signature Failure\n");
ERR_print_errors(bio_err);
goto end;
}
}
if (pubkey)
PEM_write_bio_PUBKEY(out, pkey);
ret = 0;
end:
NCONF_free(conf);
NETSCAPE_SPKI_free(spki);
BIO_free_all(out);
EVP_PKEY_free(pkey);
OPENSSL_free(passin);
return (ret);
}