mirror/openssl
2
0
Fork 0
mirror of https://github.com/openssl/openssl.git synced 2024-11-27 05:21:51 +08:00
Code Issues Packages Projects Releases Wiki Activity
dad78fb13d
openssl/ssl/record/ssl3_record.c
Matt Caswell 0220fee47f Lazily initialise the compression buffer 
With read pipelining we use multiple SSL3_RECORD structures for reading.
There are SSL_MAX_PIPELINES (32) of them defined (typically not all of these
would be used). Each one has a 16k compression buffer allocated! This
results in a significant amount of memory being consumed which, most of the
time, is not needed.  This change swaps the allocation of the compression
buffer to be lazy so that it is only done immediately before it is actually
used.

Reviewed-by: Tim Hudson <tjh@openssl.org>
2016-03-07 21:39:27 +00:00

1701 lines
59 KiB
C
Raw Blame History

/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
/* ====================================================================
* Copyright (c) 1998-2015 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@openssl.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
#include "../ssl_locl.h"
#include "internal/constant_time_locl.h"
#include <openssl/rand.h>
#include "record_locl.h"
static const unsigned char ssl3_pad_1[48] = {
0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36
};
static const unsigned char ssl3_pad_2[48] = {
0x5c, 0x5c, 0x5c, 0x5c, 0x5c, 0x5c, 0x5c, 0x5c,
0x5c, 0x5c, 0x5c, 0x5c, 0x5c, 0x5c, 0x5c, 0x5c,
0x5c, 0x5c, 0x5c, 0x5c, 0x5c, 0x5c, 0x5c, 0x5c,
0x5c, 0x5c, 0x5c, 0x5c, 0x5c, 0x5c, 0x5c, 0x5c,
0x5c, 0x5c, 0x5c, 0x5c, 0x5c, 0x5c, 0x5c, 0x5c,
0x5c, 0x5c, 0x5c, 0x5c, 0x5c, 0x5c, 0x5c, 0x5c
};
/*
* Clear the contents of an SSL3_RECORD but retain any memory allocated
*/
void SSL3_RECORD_clear(SSL3_RECORD *r, unsigned int num_recs)
{
unsigned char *comp;
unsigned int i;
for (i = 0; i < num_recs; i++) {
comp = r[i].comp;
memset(&r[i], 0, sizeof(*r));
r[i].comp = comp;
}
}
void SSL3_RECORD_release(SSL3_RECORD *r, unsigned int num_recs)
{
unsigned int i;
for (i = 0; i < num_recs; i++) {
OPENSSL_free(r[i].comp);
r[i].comp = NULL;
}
}
void SSL3_RECORD_set_seq_num(SSL3_RECORD *r, const unsigned char *seq_num)
{
memcpy(r->seq_num, seq_num, SEQ_NUM_SIZE);
}
/*
* Peeks ahead into "read_ahead" data to see if we have a whole record waiting
* for us in the buffer.
*/
static int have_whole_app_data_record_waiting(SSL *s)
{
SSL3_BUFFER *rbuf;
int left, len;
unsigned char *p;
rbuf = RECORD_LAYER_get_rbuf(&s->rlayer);
p = SSL3_BUFFER_get_buf(rbuf);
if (p == NULL)
return 0;
left = SSL3_BUFFER_get_left(rbuf);
if (left < SSL3_RT_HEADER_LENGTH)
return 0;
p += SSL3_BUFFER_get_offset(rbuf);
/*
* We only check the type and record length, we will sanity check version
* etc later
*/
if (*p != SSL3_RT_APPLICATION_DATA)
return 0;
p += 3;
n2s(p, len);
if (left < SSL3_RT_HEADER_LENGTH + len)
return 0;
return 1;
}
/*
* MAX_EMPTY_RECORDS defines the number of consecutive, empty records that
* will be processed per call to ssl3_get_record. Without this limit an
* attacker could send empty records at a faster rate than we can process and
* cause ssl3_get_record to loop forever.
*/
#define MAX_EMPTY_RECORDS 32
#define SSL2_RT_HEADER_LENGTH 2
/*-
* Call this to get new input records.
* It will return <= 0 if more data is needed, normally due to an error
* or non-blocking IO.
* When it finishes, |numrpipes| records have been decoded. For each record 'i':
* rr[i].type - is the type of record
* rr[i].data, - data
* rr[i].length, - number of bytes
* Multiple records will only be returned if the record types are all
* SSL3_RT_APPLICATION_DATA. The number of records returned will always be <=
* |max_pipelines|
*/
/* used only by ssl3_read_bytes */
int ssl3_get_record(SSL *s)
{
int ssl_major, ssl_minor, al;
int enc_err, n, i, ret = -1;
SSL3_RECORD *rr;
SSL3_BUFFER *rbuf;
SSL_SESSION *sess;
unsigned char *p;
unsigned char md[EVP_MAX_MD_SIZE];
short version;
unsigned mac_size;
unsigned empty_record_count = 0, curr_empty = 0;
unsigned int num_recs = 0;
unsigned int max_recs;
unsigned int j;
rr = RECORD_LAYER_get_rrec(&s->rlayer);
rbuf = RECORD_LAYER_get_rbuf(&s->rlayer);
max_recs = s->max_pipelines;
if (max_recs == 0)
max_recs = 1;
sess = s->session;
again:
do {
/* check if we have the header */
if ((RECORD_LAYER_get_rstate(&s->rlayer) != SSL_ST_READ_BODY) ||
(RECORD_LAYER_get_packet_length(&s->rlayer)
< SSL3_RT_HEADER_LENGTH)) {
n = ssl3_read_n(s, SSL3_RT_HEADER_LENGTH,
SSL3_BUFFER_get_len(rbuf), 0, num_recs == 0 ? 1 : 0);
if (n <= 0)
return (n); /* error or non-blocking */
RECORD_LAYER_set_rstate(&s->rlayer, SSL_ST_READ_BODY);
p = RECORD_LAYER_get_packet(&s->rlayer);
/*
* Check whether this is a regular record or an SSLv2 style record.
* The latter is only used in an initial ClientHello for old
* clients. We check s->read_hash and s->enc_read_ctx to ensure this
* does not apply during renegotiation
*/
if (s->first_packet && s->server && !s->read_hash
&& !s->enc_read_ctx
&& (p[0] & 0x80) && (p[2] == SSL2_MT_CLIENT_HELLO)) {
/* SSLv2 style record */
rr[num_recs].type = SSL3_RT_HANDSHAKE;
rr[num_recs].rec_version = SSL2_VERSION;
rr[num_recs].length = ((p[0] & 0x7f) << 8) | p[1];
if (rr[num_recs].length > SSL3_BUFFER_get_len(&rbuf[num_recs])
- SSL2_RT_HEADER_LENGTH) {
al = SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_PACKET_LENGTH_TOO_LONG);
goto f_err;
}
if (rr[num_recs].length < MIN_SSL2_RECORD_LEN) {
al = SSL_AD_HANDSHAKE_FAILURE;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_LENGTH_TOO_SHORT);
goto f_err;
}
} else {
/* SSLv3+ style record */
if (s->msg_callback)
s->msg_callback(0, 0, SSL3_RT_HEADER, p, 5, s,
s->msg_callback_arg);
/* Pull apart the header into the SSL3_RECORD */
rr[num_recs].type = *(p++);
ssl_major = *(p++);
ssl_minor = *(p++);
version = (ssl_major << 8) | ssl_minor;
rr[num_recs].rec_version = version;
n2s(p, rr[num_recs].length);
/* Lets check version */
if (!s->first_packet && version != s->version) {
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_WRONG_VERSION_NUMBER);
if ((s->version & 0xFF00) == (version & 0xFF00)
&& !s->enc_write_ctx && !s->write_hash) {
if (rr->type == SSL3_RT_ALERT) {
/*
* The record is using an incorrect version number,
* but what we've got appears to be an alert. We
* haven't read the body yet to check whether its a
* fatal or not - but chances are it is. We probably
* shouldn't send a fatal alert back. We'll just
* end.
*/
goto err;
}
/*
* Send back error using their minor version number :-)
*/
s->version = (unsigned short)version;
}
al = SSL_AD_PROTOCOL_VERSION;
goto f_err;
}
if ((version >> 8) != SSL3_VERSION_MAJOR) {
if (s->first_packet) {
/* Go back to start of packet, look at the five bytes
* that we have. */
p = RECORD_LAYER_get_packet(&s->rlayer);
if (strncmp((char *)p, "GET ", 4) == 0 ||
strncmp((char *)p, "POST ", 5) == 0 ||
strncmp((char *)p, "HEAD ", 5) == 0 ||
strncmp((char *)p, "PUT ", 4) == 0) {
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_HTTP_REQUEST);
goto err;
} else if (strncmp((char *)p, "CONNE", 5) == 0) {
SSLerr(SSL_F_SSL3_GET_RECORD,
SSL_R_HTTPS_PROXY_REQUEST);
goto err;
}
}
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_WRONG_VERSION_NUMBER);
goto err;
}
if (rr[num_recs].length >
SSL3_BUFFER_get_len(rbuf) - SSL3_RT_HEADER_LENGTH) {
al = SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_PACKET_LENGTH_TOO_LONG);
goto f_err;
}
}
/* now s->rlayer.rstate == SSL_ST_READ_BODY */
}
/*
* s->rlayer.rstate == SSL_ST_READ_BODY, get and decode the data.
* Calculate how much more data we need to read for the rest of the
* record
*/
if (rr[num_recs].rec_version == SSL2_VERSION) {
i = rr[num_recs].length + SSL2_RT_HEADER_LENGTH
- SSL3_RT_HEADER_LENGTH;
} else {
i = rr[num_recs].length;
}
if (i > 0) {
/* now s->packet_length == SSL3_RT_HEADER_LENGTH */
n = ssl3_read_n(s, i, i, 1, 0);
if (n <= 0)
return (n); /* error or non-blocking io */
}
/* set state for later operations */
RECORD_LAYER_set_rstate(&s->rlayer, SSL_ST_READ_HEADER);
/*
* At this point, s->packet_length == SSL3_RT_HEADER_LENGTH + rr->length,
* or s->packet_length == SSL2_RT_HEADER_LENGTH + rr->length
* and we have that many bytes in s->packet
*/
if(rr[num_recs].rec_version == SSL2_VERSION) {
rr[num_recs].input =
&(RECORD_LAYER_get_packet(&s->rlayer)[SSL2_RT_HEADER_LENGTH]);
} else {
rr[num_recs].input =
&(RECORD_LAYER_get_packet(&s->rlayer)[SSL3_RT_HEADER_LENGTH]);
}
/*
* ok, we can now read from 's->packet' data into 'rr' rr->input points
* at rr->length bytes, which need to be copied into rr->data by either
* the decryption or by the decompression When the data is 'copied' into
* the rr->data buffer, rr->input will be pointed at the new buffer
*/
/*
* We now have - encrypted [ MAC [ compressed [ plain ] ] ] rr->length
* bytes of encrypted compressed stuff.
*/
/* check is not needed I believe */
if (rr[num_recs].length > SSL3_RT_MAX_ENCRYPTED_LENGTH) {
al = SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_ENCRYPTED_LENGTH_TOO_LONG);
goto f_err;
}
/* decrypt in place in 'rr->input' */
rr[num_recs].data = rr[num_recs].input;
rr[num_recs].orig_len = rr[num_recs].length;
num_recs++;
/* we have pulled in a full packet so zero things */
RECORD_LAYER_reset_packet_length(&s->rlayer);
} while (num_recs < max_recs && rr->type == SSL3_RT_APPLICATION_DATA
&& SSL_USE_EXPLICIT_IV(s)
&& s->enc_read_ctx != NULL
&& (EVP_CIPHER_flags(EVP_CIPHER_CTX_cipher(s->enc_read_ctx))
& EVP_CIPH_FLAG_PIPELINE)
&& have_whole_app_data_record_waiting(s));
/*
* If in encrypt-then-mac mode calculate mac from encrypted record. All
* the details below are public so no timing details can leak.
*/
if (SSL_USE_ETM(s) && s->read_hash) {
unsigned char *mac;
mac_size = EVP_MD_CTX_size(s->read_hash);
OPENSSL_assert(mac_size <= EVP_MAX_MD_SIZE);
for (j = 0; j < num_recs; j++) {
if (rr[j].length < mac_size) {
al = SSL_AD_DECODE_ERROR;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_LENGTH_TOO_SHORT);
goto f_err;
}
rr[j].length -= mac_size;
mac = rr[j].data + rr[j].length;
i = s->method->ssl3_enc->mac(s, &rr[j], md, 0 /* not send */ );
if (i < 0 || CRYPTO_memcmp(md, mac, (size_t)mac_size) != 0) {
al = SSL_AD_BAD_RECORD_MAC;
SSLerr(SSL_F_SSL3_GET_RECORD,
SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC);
goto f_err;
}
}
}
enc_err = s->method->ssl3_enc->enc(s, rr, num_recs, 0);
/*-
* enc_err is:
* 0: (in non-constant time) if the record is publically invalid.
* 1: if the padding is valid
* -1: if the padding is invalid
*/
if (enc_err == 0) {
al = SSL_AD_DECRYPTION_FAILED;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_BLOCK_CIPHER_PAD_IS_WRONG);
goto f_err;
}
#ifdef SSL_DEBUG
printf("dec %d\n", rr->length);
{
unsigned int z;
for (z = 0; z < rr->length; z++)
printf("%02X%c", rr->data[z], ((z + 1) % 16) ? ' ' : '\n');
}
printf("\n");
#endif
/* r->length is now the compressed data plus mac */
if ((sess != NULL) &&
(s->enc_read_ctx != NULL) &&
(EVP_MD_CTX_md(s->read_hash) != NULL) && !SSL_USE_ETM(s)) {
/* s->read_hash != NULL => mac_size != -1 */
unsigned char *mac = NULL;
unsigned char mac_tmp[EVP_MAX_MD_SIZE];
mac_size = EVP_MD_CTX_size(s->read_hash);
OPENSSL_assert(mac_size <= EVP_MAX_MD_SIZE);
for (j=0; j < num_recs; j++) {
/*
* orig_len is the length of the record before any padding was
* removed. This is public information, as is the MAC in use,
* therefore we can safely process the record in a different amount
* of time if it's too short to possibly contain a MAC.
*/
if (rr[j].orig_len < mac_size ||
/* CBC records must have a padding length byte too. */
(EVP_CIPHER_CTX_mode(s->enc_read_ctx) == EVP_CIPH_CBC_MODE &&
rr[j].orig_len < mac_size + 1)) {
al = SSL_AD_DECODE_ERROR;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_LENGTH_TOO_SHORT);
goto f_err;
}
if (EVP_CIPHER_CTX_mode(s->enc_read_ctx) == EVP_CIPH_CBC_MODE) {
/*
* We update the length so that the TLS header bytes can be
* constructed correctly but we need to extract the MAC in
* constant time from within the record, without leaking the
* contents of the padding bytes.
*/
mac = mac_tmp;
ssl3_cbc_copy_mac(mac_tmp, &rr[j], mac_size);
rr[j].length -= mac_size;
} else {
/*
* In this case there's no padding, so |rec->orig_len| equals
* |rec->length| and we checked that there's enough bytes for
* |mac_size| above.
*/
rr[j].length -= mac_size;
mac = &rr[j].data[rr[j].length];
}
i = s->method->ssl3_enc->mac(s, &rr[j], md, 0 /* not send */ );
if (i < 0 || mac == NULL
|| CRYPTO_memcmp(md, mac, (size_t)mac_size) != 0)
enc_err = -1;
if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH + mac_size)
enc_err = -1;
}
}
if (enc_err < 0) {
/*
* A separate 'decryption_failed' alert was introduced with TLS 1.0,
* SSL 3.0 only has 'bad_record_mac'. But unless a decryption
* failure is directly visible from the ciphertext anyway, we should
* not reveal which kind of error occurred -- this might become
* visible to an attacker (e.g. via a logfile)
*/
al = SSL_AD_BAD_RECORD_MAC;
SSLerr(SSL_F_SSL3_GET_RECORD,
SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC);
goto f_err;
}
for (j = 0; j < num_recs; j++) {
/* rr[j].length is now just compressed */
if (s->expand != NULL) {
if (rr[j].length > SSL3_RT_MAX_COMPRESSED_LENGTH) {
al = SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_COMPRESSED_LENGTH_TOO_LONG);
goto f_err;
}
if (!ssl3_do_uncompress(s, &rr[j])) {
al = SSL_AD_DECOMPRESSION_FAILURE;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_BAD_DECOMPRESSION);
goto f_err;
}
}
if (rr[j].length > SSL3_RT_MAX_PLAIN_LENGTH) {
al = SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_DATA_LENGTH_TOO_LONG);
goto f_err;
}
rr[j].off = 0;
/*-
* So at this point the following is true
* rr[j].type is the type of record
* rr[j].length == number of bytes in record
* rr[j].off == offset to first valid byte
* rr[j].data == where to take bytes from, increment after use :-).
*/
/* just read a 0 length packet */
if (rr[j].length == 0) {
curr_empty++;
empty_record_count++;
if (empty_record_count > MAX_EMPTY_RECORDS) {
al = SSL_AD_UNEXPECTED_MESSAGE;
SSLerr(SSL_F_SSL3_GET_RECORD, SSL_R_RECORD_TOO_SMALL);
goto f_err;
}
}
}
if (curr_empty == num_recs) {
/* We have no data - do it all again */
num_recs = 0;
curr_empty = 0;
goto again;
}
RECORD_LAYER_set_numrpipes(&s->rlayer, num_recs);
return 1;
f_err:
ssl3_send_alert(s, SSL3_AL_FATAL, al);
err:
return ret;
}
int ssl3_do_uncompress(SSL *ssl, SSL3_RECORD *rr)
{
#ifndef OPENSSL_NO_COMP
int i;
if (rr->comp == NULL) {
rr->comp = (unsigned char *)
OPENSSL_malloc(SSL3_RT_MAX_ENCRYPTED_LENGTH);
}
if (rr->comp == NULL)
return 0;
i = COMP_expand_block(ssl->expand, rr->comp,
SSL3_RT_MAX_PLAIN_LENGTH, rr->data,
(int)rr->length);
if (i < 0)
return 0;
else
rr->length = i;
rr->data = rr->comp;
#endif
return 1;
}
int ssl3_do_compress(SSL *ssl, SSL3_RECORD *wr)
{
#ifndef OPENSSL_NO_COMP
int i;
i = COMP_compress_block(ssl->compress, wr->data,
SSL3_RT_MAX_COMPRESSED_LENGTH,
wr->input, (int)wr->length);
if (i < 0)
return (0);
else
wr->length = i;
wr->input = wr->data;
#endif
return (1);
}
/*-
* ssl3_enc encrypts/decrypts the record in |s->wrec| / |s->rrec|, respectively.
*
* Returns:
* 0: (in non-constant time) if the record is publically invalid (i.e. too
* short etc).
* 1: if the record's padding is valid / the encryption was successful.
* -1: if the record's padding is invalid or, if sending, an internal error
* occurred.
*/
int ssl3_enc(SSL *s, SSL3_RECORD *inrecs, unsigned int numpipes, int send)
{
SSL3_RECORD *rec;
EVP_CIPHER_CTX *ds;
unsigned long l;
int bs, i, mac_size = 0;
const EVP_CIPHER *enc;
rec = inrecs;
if (send) {
ds = s->enc_write_ctx;
if (s->enc_write_ctx == NULL)
enc = NULL;
else
enc = EVP_CIPHER_CTX_cipher(s->enc_write_ctx);
} else {
ds = s->enc_read_ctx;
if (s->enc_read_ctx == NULL)
enc = NULL;
else
enc = EVP_CIPHER_CTX_cipher(s->enc_read_ctx);
}
if ((s->session == NULL) || (ds == NULL) || (enc == NULL)) {
memmove(rec->data, rec->input, rec->length);
rec->input = rec->data;
} else {
l = rec->length;
bs = EVP_CIPHER_CTX_block_size(ds);
/* COMPRESS */
if ((bs != 1) && send) {
i = bs - ((int)l % bs);
/* we need to add 'i-1' padding bytes */
l += i;
/*
* the last of these zero bytes will be overwritten with the
* padding length.
*/
memset(&rec->input[rec->length], 0, i);
rec->length += i;
rec->input[l - 1] = (i - 1);
}
if (!send) {
if (l == 0 || l % bs != 0)
return 0;
/* otherwise, rec->length >= bs */
}
if (EVP_Cipher(ds, rec->data, rec->input, l) < 1)
return -1;
if (EVP_MD_CTX_md(s->read_hash) != NULL)
mac_size = EVP_MD_CTX_size(s->read_hash);
if ((bs != 1) && !send)
return ssl3_cbc_remove_padding(rec, bs, mac_size);
}
return (1);
}
/*-
* tls1_enc encrypts/decrypts the record in |s->wrec| / |s->rrec|, respectively.
*
* Returns:
* 0: (in non-constant time) if the record is publically invalid (i.e. too
* short etc).
* 1: if the record's padding is valid / the encryption was successful.
* -1: if the record's padding/AEAD-authenticator is invalid or, if sending,
* an internal error occurred.
*/
int tls1_enc(SSL *s, SSL3_RECORD *recs, unsigned int numpipes, int send)
{
EVP_CIPHER_CTX *ds;
size_t reclen[SSL_MAX_PIPELINES];
unsigned char buf[SSL_MAX_PIPELINES][EVP_AEAD_TLS1_AAD_LEN];
int bs, i, j, k, pad = 0, ret, mac_size = 0;
const EVP_CIPHER *enc;
unsigned int ctr;
if (send) {
if (EVP_MD_CTX_md(s->write_hash)) {
int n = EVP_MD_CTX_size(s->write_hash);
OPENSSL_assert(n >= 0);
}
ds = s->enc_write_ctx;
if (s->enc_write_ctx == NULL)
enc = NULL;
else {
int ivlen;
enc = EVP_CIPHER_CTX_cipher(s->enc_write_ctx);
/* For TLSv1.1 and later explicit IV */
if (SSL_USE_EXPLICIT_IV(s)
&& EVP_CIPHER_mode(enc) == EVP_CIPH_CBC_MODE)
ivlen = EVP_CIPHER_iv_length(enc);
else
ivlen = 0;
if (ivlen > 1) {
for (ctr = 0; ctr < numpipes; ctr++) {
if (recs[ctr].data != recs[ctr].input) {
/*
* we can't write into the input stream: Can this ever
* happen?? (steve)
*/
SSLerr(SSL_F_TLS1_ENC, ERR_R_INTERNAL_ERROR);
return -1;
} else if (RAND_bytes(recs[ctr].input, ivlen) <= 0) {
SSLerr(SSL_F_TLS1_ENC, ERR_R_INTERNAL_ERROR);
return -1;
}
}
}
}
} else {
if (EVP_MD_CTX_md(s->read_hash)) {
int n = EVP_MD_CTX_size(s->read_hash);
OPENSSL_assert(n >= 0);
}
ds = s->enc_read_ctx;
if (s->enc_read_ctx == NULL)
enc = NULL;
else
enc = EVP_CIPHER_CTX_cipher(s->enc_read_ctx);
}
if ((s->session == NULL) || (ds == NULL) || (enc == NULL)) {
for (ctr = 0; ctr < numpipes; ctr++) {
memmove(recs[ctr].data, recs[ctr].input, recs[ctr].length);
recs[ctr].input = recs[ctr].data;
}
ret = 1;
} else {
bs = EVP_CIPHER_block_size(EVP_CIPHER_CTX_cipher(ds));
if (numpipes > 1) {
if(!(EVP_CIPHER_flags(EVP_CIPHER_CTX_cipher(ds))
& EVP_CIPH_FLAG_PIPELINE)) {
/*
* We shouldn't have been called with pipeline data if the
* cipher doesn't support pipelining
*/
SSLerr(SSL_F_TLS1_ENC, SSL_R_PIPELINE_FAILURE);
return -1;
}
}
for (ctr = 0; ctr < numpipes; ctr++) {
reclen[ctr] = recs[ctr].length;
if (EVP_CIPHER_flags(EVP_CIPHER_CTX_cipher(ds))
& EVP_CIPH_FLAG_AEAD_CIPHER) {
unsigned char *seq;
seq = send ? RECORD_LAYER_get_write_sequence(&s->rlayer)
: RECORD_LAYER_get_read_sequence(&s->rlayer);
if (SSL_IS_DTLS(s)) {
/* DTLS does not support pipelining */
unsigned char dtlsseq[9], *p = dtlsseq;
s2n(send ? DTLS_RECORD_LAYER_get_w_epoch(&s->rlayer) :
DTLS_RECORD_LAYER_get_r_epoch(&s->rlayer), p);
memcpy(p, &seq[2], 6);
memcpy(buf[ctr], dtlsseq, 8);
} else {
memcpy(buf[ctr], seq, 8);
for (i = 7; i >= 0; i--) { /* increment */
++seq[i];
if (seq[i] != 0)
break;
}
}
buf[ctr][8] = recs[ctr].type;
buf[ctr][9] = (unsigned char)(s->version >> 8);
buf[ctr][10] = (unsigned char)(s->version);
buf[ctr][11] = recs[ctr].length >> 8;
buf[ctr][12] = recs[ctr].length & 0xff;
pad = EVP_CIPHER_CTX_ctrl(ds, EVP_CTRL_AEAD_TLS1_AAD,
EVP_AEAD_TLS1_AAD_LEN, buf[ctr]);
if (pad <= 0)
return -1;
if (send) {
reclen[ctr] += pad;
recs[ctr].length += pad;
}
} else if ((bs != 1) && send) {
i = bs - ((int)reclen[ctr] % bs);
/* Add weird padding of upto 256 bytes */
/* we need to add 'i' padding bytes of value j */
j = i - 1;
for (k = (int)reclen[ctr]; k < (int)(reclen[ctr] + i); k++)
recs[ctr].input[k] = j;
reclen[ctr] += i;
recs[ctr].length += i;
}
if (!send) {
if (reclen[ctr] == 0 || reclen[ctr] % bs != 0)
return 0;
}
}
if (numpipes > 1) {
unsigned char *data[SSL_MAX_PIPELINES];
/* Set the output buffers */
for(ctr = 0; ctr < numpipes; ctr++) {
data[ctr] = recs[ctr].data;
}
if (EVP_CIPHER_CTX_ctrl(ds, EVP_CTRL_SET_PIPELINE_OUTPUT_BUFS,
numpipes, data) <= 0) {
SSLerr(SSL_F_TLS1_ENC, SSL_R_PIPELINE_FAILURE);
}
/* Set the input buffers */
for(ctr = 0; ctr < numpipes; ctr++) {
data[ctr] = recs[ctr].input;
}
if (EVP_CIPHER_CTX_ctrl(ds, EVP_CTRL_SET_PIPELINE_INPUT_BUFS,
numpipes, data) <= 0
|| EVP_CIPHER_CTX_ctrl(ds, EVP_CTRL_SET_PIPELINE_INPUT_LENS,
numpipes, reclen) <= 0) {
SSLerr(SSL_F_TLS1_ENC, SSL_R_PIPELINE_FAILURE);
return -1;
}
}
i = EVP_Cipher(ds, recs[0].data, recs[0].input, reclen[0]);
if ((EVP_CIPHER_flags(EVP_CIPHER_CTX_cipher(ds))
& EVP_CIPH_FLAG_CUSTOM_CIPHER)
? (i < 0)
: (i == 0))
return -1; /* AEAD can fail to verify MAC */
if (send == 0) {
if (EVP_CIPHER_mode(enc) == EVP_CIPH_GCM_MODE) {
for (ctr = 0; ctr < numpipes; ctr++) {
recs[ctr].data += EVP_GCM_TLS_EXPLICIT_IV_LEN;
recs[ctr].input += EVP_GCM_TLS_EXPLICIT_IV_LEN;
recs[ctr].length -= EVP_GCM_TLS_EXPLICIT_IV_LEN;
}
} else if (EVP_CIPHER_mode(enc) == EVP_CIPH_CCM_MODE) {
for (ctr = 0; ctr < numpipes; ctr++) {
recs[ctr].data += EVP_CCM_TLS_EXPLICIT_IV_LEN;
recs[ctr].input += EVP_CCM_TLS_EXPLICIT_IV_LEN;
recs[ctr].length -= EVP_CCM_TLS_EXPLICIT_IV_LEN;
}
}
}
ret = 1;
if (!SSL_USE_ETM(s) && EVP_MD_CTX_md(s->read_hash) != NULL)
mac_size = EVP_MD_CTX_size(s->read_hash);
if ((bs != 1) && !send) {
int tmpret;
for (ctr = 0; ctr < numpipes; ctr++) {
tmpret = tls1_cbc_remove_padding(s, &recs[ctr], bs, mac_size);
if (tmpret == -1)
return -1;
ret &= tmpret;
}
}
if (pad && !send) {
for (ctr = 0; ctr < numpipes; ctr++) {
recs[ctr].length -= pad;
}
}
}
return ret;
}
int n_ssl3_mac(SSL *ssl, SSL3_RECORD *rec, unsigned char *md, int send)
{
unsigned char *mac_sec, *seq;
const EVP_MD_CTX *hash;
unsigned char *p, rec_char;
size_t md_size;
int npad;
int t;
if (send) {
mac_sec = &(ssl->s3->write_mac_secret[0]);
seq = RECORD_LAYER_get_write_sequence(&ssl->rlayer);
hash = ssl->write_hash;
} else {
mac_sec = &(ssl->s3->read_mac_secret[0]);
seq = RECORD_LAYER_get_read_sequence(&ssl->rlayer);
hash = ssl->read_hash;
}
t = EVP_MD_CTX_size(hash);
if (t < 0)
return -1;
md_size = t;
npad = (48 / md_size) * md_size;
if (!send &&
EVP_CIPHER_CTX_mode(ssl->enc_read_ctx) == EVP_CIPH_CBC_MODE &&
ssl3_cbc_record_digest_supported(hash)) {
/*
* This is a CBC-encrypted record. We must avoid leaking any
* timing-side channel information about how many blocks of data we
* are hashing because that gives an attacker a timing-oracle.
*/
/*-
* npad is, at most, 48 bytes and that's with MD5:
* 16 + 48 + 8 (sequence bytes) + 1 + 2 = 75.
*
* With SHA-1 (the largest hash speced for SSLv3) the hash size
* goes up 4, but npad goes down by 8, resulting in a smaller
* total size.
*/
unsigned char header[75];
unsigned j = 0;
memcpy(header + j, mac_sec, md_size);
j += md_size;
memcpy(header + j, ssl3_pad_1, npad);
j += npad;
memcpy(header + j, seq, 8);
j += 8;
header[j++] = rec->type;
header[j++] = rec->length >> 8;
header[j++] = rec->length & 0xff;
/* Final param == is SSLv3 */
if (ssl3_cbc_digest_record(hash,
md, &md_size,
header, rec->input,
rec->length + md_size, rec->orig_len,
mac_sec, md_size, 1) <= 0)
return -1;
} else {
unsigned int md_size_u;
/* Chop the digest off the end :-) */
EVP_MD_CTX *md_ctx = EVP_MD_CTX_new();
if (md_ctx == NULL)
return -1;
rec_char = rec->type;
p = md;
s2n(rec->length, p);
if (EVP_MD_CTX_copy_ex(md_ctx, hash) <= 0
|| EVP_DigestUpdate(md_ctx, mac_sec, md_size) <= 0
|| EVP_DigestUpdate(md_ctx, ssl3_pad_1, npad) <= 0
|| EVP_DigestUpdate(md_ctx, seq, 8) <= 0
|| EVP_DigestUpdate(md_ctx, &rec_char, 1) <= 0
|| EVP_DigestUpdate(md_ctx, md, 2) <= 0
|| EVP_DigestUpdate(md_ctx, rec->input, rec->length) <= 0
|| EVP_DigestFinal_ex(md_ctx, md, NULL) <= 0
|| EVP_MD_CTX_copy_ex(md_ctx, hash) <= 0
|| EVP_DigestUpdate(md_ctx, mac_sec, md_size) <= 0
|| EVP_DigestUpdate(md_ctx, ssl3_pad_2, npad) <= 0
|| EVP_DigestUpdate(md_ctx, md, md_size) <= 0
|| EVP_DigestFinal_ex(md_ctx, md, &md_size_u) <= 0) {
EVP_MD_CTX_reset(md_ctx);
return -1;
}
md_size = md_size_u;
EVP_MD_CTX_free(md_ctx);
}
ssl3_record_sequence_update(seq);
return (md_size);
}
int tls1_mac(SSL *ssl, SSL3_RECORD *rec, unsigned char *md, int send)
{
unsigned char *seq;
EVP_MD_CTX *hash;
size_t md_size;
int i;
EVP_MD_CTX *hmac = NULL, *mac_ctx;
unsigned char header[13];
int stream_mac = (send ? (ssl->mac_flags & SSL_MAC_FLAG_WRITE_MAC_STREAM)
: (ssl->mac_flags & SSL_MAC_FLAG_READ_MAC_STREAM));
int t;
if (send) {
seq = RECORD_LAYER_get_write_sequence(&ssl->rlayer);
hash = ssl->write_hash;
} else {
seq = RECORD_LAYER_get_read_sequence(&ssl->rlayer);
hash = ssl->read_hash;
}
t = EVP_MD_CTX_size(hash);
OPENSSL_assert(t >= 0);
md_size = t;
/* I should fix this up TLS TLS TLS TLS TLS XXXXXXXX */
if (stream_mac) {
mac_ctx = hash;
} else {
hmac = EVP_MD_CTX_new();
if (hmac == NULL
|| !EVP_MD_CTX_copy(hmac, hash))
return -1;
mac_ctx = hmac;
}
if (SSL_IS_DTLS(ssl)) {
unsigned char dtlsseq[8], *p = dtlsseq;
s2n(send ? DTLS_RECORD_LAYER_get_w_epoch(&ssl->rlayer) :
DTLS_RECORD_LAYER_get_r_epoch(&ssl->rlayer), p);
memcpy(p, &seq[2], 6);
memcpy(header, dtlsseq, 8);
} else
memcpy(header, seq, 8);
header[8] = rec->type;
header[9] = (unsigned char)(ssl->version >> 8);
header[10] = (unsigned char)(ssl->version);
header[11] = (rec->length) >> 8;
header[12] = (rec->length) & 0xff;
if (!send && !SSL_USE_ETM(ssl) &&
EVP_CIPHER_CTX_mode(ssl->enc_read_ctx) == EVP_CIPH_CBC_MODE &&
ssl3_cbc_record_digest_supported(mac_ctx)) {
/*
* This is a CBC-encrypted record. We must avoid leaking any
* timing-side channel information about how many blocks of data we
* are hashing because that gives an attacker a timing-oracle.
*/
/* Final param == not SSLv3 */
if (ssl3_cbc_digest_record(mac_ctx,
md, &md_size,
header, rec->input,
rec->length + md_size, rec->orig_len,
ssl->s3->read_mac_secret,
ssl->s3->read_mac_secret_size, 0) <= 0) {
EVP_MD_CTX_free(hmac);
return -1;
}
} else {
if (EVP_DigestSignUpdate(mac_ctx, header, sizeof(header)) <= 0
|| EVP_DigestSignUpdate(mac_ctx, rec->input, rec->length) <= 0
|| EVP_DigestSignFinal(mac_ctx, md, &md_size) <= 0) {
EVP_MD_CTX_free(hmac);
return -1;
}
if (!send && !SSL_USE_ETM(ssl) && FIPS_mode())
tls_fips_digest_extra(ssl->enc_read_ctx,
mac_ctx, rec->input,
rec->length, rec->orig_len);
}
EVP_MD_CTX_free(hmac);
#ifdef SSL_DEBUG
fprintf(stderr, "seq=");
{
int z;
for (z = 0; z < 8; z++)
fprintf(stderr, "%02X ", seq[z]);
fprintf(stderr, "\n");
}
fprintf(stderr, "rec=");
{
unsigned int z;
for (z = 0; z < rec->length; z++)
fprintf(stderr, "%02X ", rec->data[z]);
fprintf(stderr, "\n");
}
#endif
if (!SSL_IS_DTLS(ssl)) {
for (i = 7; i >= 0; i--) {
++seq[i];
if (seq[i] != 0)
break;
}
}
#ifdef SSL_DEBUG
{
unsigned int z;
for (z = 0; z < md_size; z++)
fprintf(stderr, "%02X ", md[z]);
fprintf(stderr, "\n");
}
#endif
return (md_size);
}
/*-
* ssl3_cbc_remove_padding removes padding from the decrypted, SSLv3, CBC
* record in |rec| by updating |rec->length| in constant time.
*
* block_size: the block size of the cipher used to encrypt the record.
* returns:
* 0: (in non-constant time) if the record is publicly invalid.
* 1: if the padding was valid
* -1: otherwise.
*/
int ssl3_cbc_remove_padding(SSL3_RECORD *rec,
unsigned block_size, unsigned mac_size)
{
unsigned padding_length, good;
const unsigned overhead = 1 /* padding length byte */ + mac_size;
/*
* These lengths are all public so we can test them in non-constant time.
*/
if (overhead > rec->length)
return 0;
padding_length = rec->data[rec->length - 1];
good = constant_time_ge(rec->length, padding_length + overhead);
/* SSLv3 requires that the padding is minimal. */
good &= constant_time_ge(block_size, padding_length + 1);
rec->length -= good & (padding_length + 1);
return constant_time_select_int(good, 1, -1);
}
/*-
* tls1_cbc_remove_padding removes the CBC padding from the decrypted, TLS, CBC
* record in |rec| in constant time and returns 1 if the padding is valid and
* -1 otherwise. It also removes any explicit IV from the start of the record
* without leaking any timing about whether there was enough space after the
* padding was removed.
*
* block_size: the block size of the cipher used to encrypt the record.
* returns:
* 0: (in non-constant time) if the record is publicly invalid.
* 1: if the padding was valid
* -1: otherwise.
*/
int tls1_cbc_remove_padding(const SSL *s,
SSL3_RECORD *rec,
unsigned block_size, unsigned mac_size)
{
unsigned padding_length, good, to_check, i;
const unsigned overhead = 1 /* padding length byte */ + mac_size;
/* Check if version requires explicit IV */
if (SSL_USE_EXPLICIT_IV(s)) {
/*
* These lengths are all public so we can test them in non-constant
* time.
*/
if (overhead + block_size > rec->length)
return 0;
/* We can now safely skip explicit IV */
rec->data += block_size;
rec->input += block_size;
rec->length -= block_size;
rec->orig_len -= block_size;
} else if (overhead > rec->length)
return 0;
padding_length = rec->data[rec->length - 1];
if (EVP_CIPHER_flags(EVP_CIPHER_CTX_cipher(s->enc_read_ctx)) & EVP_CIPH_FLAG_AEAD_CIPHER) {
/* padding is already verified */
rec->length -= padding_length + 1;
return 1;
}
good = constant_time_ge(rec->length, overhead + padding_length);
/*
* The padding consists of a length byte at the end of the record and
* then that many bytes of padding, all with the same value as the length
* byte. Thus, with the length byte included, there are i+1 bytes of
* padding. We can't check just |padding_length+1| bytes because that
* leaks decrypted information. Therefore we always have to check the
* maximum amount of padding possible. (Again, the length of the record
* is public information so we can use it.)
*/
to_check = 255; /* maximum amount of padding. */
if (to_check > rec->length - 1)
to_check = rec->length - 1;
for (i = 0; i < to_check; i++) {
unsigned char mask = constant_time_ge_8(padding_length, i);
unsigned char b = rec->data[rec->length - 1 - i];
/*
* The final |padding_length+1| bytes should all have the value
* |padding_length|. Therefore the XOR should be zero.
*/
good &= ~(mask & (padding_length ^ b));
}
/*
* If any of the final |padding_length+1| bytes had the wrong value, one
* or more of the lower eight bits of |good| will be cleared.
*/
good = constant_time_eq(0xff, good & 0xff);
rec->length -= good & (padding_length + 1);
return constant_time_select_int(good, 1, -1);
}
/*-
* ssl3_cbc_copy_mac copies |md_size| bytes from the end of |rec| to |out| in
* constant time (independent of the concrete value of rec->length, which may
* vary within a 256-byte window).
*
* ssl3_cbc_remove_padding or tls1_cbc_remove_padding must be called prior to
* this function.
*
* On entry:
* rec->orig_len >= md_size
* md_size <= EVP_MAX_MD_SIZE
*
* If CBC_MAC_ROTATE_IN_PLACE is defined then the rotation is performed with
* variable accesses in a 64-byte-aligned buffer. Assuming that this fits into
* a single or pair of cache-lines, then the variable memory accesses don't
* actually affect the timing. CPUs with smaller cache-lines [if any] are
* not multi-core and are not considered vulnerable to cache-timing attacks.
*/
#define CBC_MAC_ROTATE_IN_PLACE
void ssl3_cbc_copy_mac(unsigned char *out,
const SSL3_RECORD *rec, unsigned md_size)
{
#if defined(CBC_MAC_ROTATE_IN_PLACE)
unsigned char rotated_mac_buf[64 + EVP_MAX_MD_SIZE];
unsigned char *rotated_mac;
#else
unsigned char rotated_mac[EVP_MAX_MD_SIZE];
#endif
/*
* mac_end is the index of |rec->data| just after the end of the MAC.
*/
unsigned mac_end = rec->length;
unsigned mac_start = mac_end - md_size;
/*
* scan_start contains the number of bytes that we can ignore because the
* MAC's position can only vary by 255 bytes.
*/
unsigned scan_start = 0;
unsigned i, j;
unsigned div_spoiler;
unsigned rotate_offset;
OPENSSL_assert(rec->orig_len >= md_size);
OPENSSL_assert(md_size <= EVP_MAX_MD_SIZE);
#if defined(CBC_MAC_ROTATE_IN_PLACE)
rotated_mac = rotated_mac_buf + ((0 - (size_t)rotated_mac_buf) & 63);
#endif
/* This information is public so it's safe to branch based on it. */
if (rec->orig_len > md_size + 255 + 1)
scan_start = rec->orig_len - (md_size + 255 + 1);
/*
* div_spoiler contains a multiple of md_size that is used to cause the
* modulo operation to be constant time. Without this, the time varies
* based on the amount of padding when running on Intel chips at least.
* The aim of right-shifting md_size is so that the compiler doesn't
* figure out that it can remove div_spoiler as that would require it to
* prove that md_size is always even, which I hope is beyond it.
*/
div_spoiler = md_size >> 1;
div_spoiler <<= (sizeof(div_spoiler) - 1) * 8;
rotate_offset = (div_spoiler + mac_start - scan_start) % md_size;
memset(rotated_mac, 0, md_size);
for (i = scan_start, j = 0; i < rec->orig_len; i++) {
unsigned char mac_started = constant_time_ge_8(i, mac_start);
unsigned char mac_ended = constant_time_ge_8(i, mac_end);
unsigned char b = rec->data[i];
rotated_mac[j++] |= b & mac_started & ~mac_ended;
j &= constant_time_lt(j, md_size);
}
/* Now rotate the MAC */
#if defined(CBC_MAC_ROTATE_IN_PLACE)
j = 0;
for (i = 0; i < md_size; i++) {
/* in case cache-line is 32 bytes, touch second line */
((volatile unsigned char *)rotated_mac)[rotate_offset ^ 32];
out[j++] = rotated_mac[rotate_offset++];
rotate_offset &= constant_time_lt(rotate_offset, md_size);
}
#else
memset(out, 0, md_size);
rotate_offset = md_size - rotate_offset;
rotate_offset &= constant_time_lt(rotate_offset, md_size);
for (i = 0; i < md_size; i++) {
for (j = 0; j < md_size; j++)
out[j] |= rotated_mac[i] & constant_time_eq_8(j, rotate_offset);
rotate_offset++;
rotate_offset &= constant_time_lt(rotate_offset, md_size);
}
#endif
}
int dtls1_process_record(SSL *s)
{
int i, al;
int enc_err;
SSL_SESSION *sess;
SSL3_RECORD *rr;
unsigned int mac_size;
unsigned char md[EVP_MAX_MD_SIZE];
rr = RECORD_LAYER_get_rrec(&s->rlayer);
sess = s->session;
/*
* At this point, s->packet_length == SSL3_RT_HEADER_LNGTH + rr->length,
* and we have that many bytes in s->packet
*/
rr->input = &(RECORD_LAYER_get_packet(&s->rlayer)[DTLS1_RT_HEADER_LENGTH]);
/*
* ok, we can now read from 's->packet' data into 'rr' rr->input points
* at rr->length bytes, which need to be copied into rr->data by either
* the decryption or by the decompression When the data is 'copied' into
* the rr->data buffer, rr->input will be pointed at the new buffer
*/
/*
* We now have - encrypted [ MAC [ compressed [ plain ] ] ] rr->length
* bytes of encrypted compressed stuff.
*/
/* check is not needed I believe */
if (rr->length > SSL3_RT_MAX_ENCRYPTED_LENGTH) {
al = SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_DTLS1_PROCESS_RECORD, SSL_R_ENCRYPTED_LENGTH_TOO_LONG);
goto f_err;
}
/* decrypt in place in 'rr->input' */
rr->data = rr->input;
rr->orig_len = rr->length;
enc_err = s->method->ssl3_enc->enc(s, rr, 1, 0);
/*-
* enc_err is:
* 0: (in non-constant time) if the record is publically invalid.
* 1: if the padding is valid
* -1: if the padding is invalid
*/
if (enc_err == 0) {
/* For DTLS we simply ignore bad packets. */
rr->length = 0;
RECORD_LAYER_reset_packet_length(&s->rlayer);
goto err;
}
#ifdef SSL_DEBUG
printf("dec %d\n", rr->length);
{
unsigned int z;
for (z = 0; z < rr->length; z++)
printf("%02X%c", rr->data[z], ((z + 1) % 16) ? ' ' : '\n');
}
printf("\n");
#endif
/* r->length is now the compressed data plus mac */
if ((sess != NULL) &&
(s->enc_read_ctx != NULL) && (EVP_MD_CTX_md(s->read_hash) != NULL)) {
/* s->read_hash != NULL => mac_size != -1 */
unsigned char *mac = NULL;
unsigned char mac_tmp[EVP_MAX_MD_SIZE];
mac_size = EVP_MD_CTX_size(s->read_hash);
OPENSSL_assert(mac_size <= EVP_MAX_MD_SIZE);
/*
* orig_len is the length of the record before any padding was
* removed. This is public information, as is the MAC in use,
* therefore we can safely process the record in a different amount
* of time if it's too short to possibly contain a MAC.
*/
if (rr->orig_len < mac_size ||
/* CBC records must have a padding length byte too. */
(EVP_CIPHER_CTX_mode(s->enc_read_ctx) == EVP_CIPH_CBC_MODE &&
rr->orig_len < mac_size + 1)) {
al = SSL_AD_DECODE_ERROR;
SSLerr(SSL_F_DTLS1_PROCESS_RECORD, SSL_R_LENGTH_TOO_SHORT);
goto f_err;
}
if (EVP_CIPHER_CTX_mode(s->enc_read_ctx) == EVP_CIPH_CBC_MODE) {
/*
* We update the length so that the TLS header bytes can be
* constructed correctly but we need to extract the MAC in
* constant time from within the record, without leaking the
* contents of the padding bytes.
*/
mac = mac_tmp;
ssl3_cbc_copy_mac(mac_tmp, rr, mac_size);
rr->length -= mac_size;
} else {
/*
* In this case there's no padding, so |rec->orig_len| equals
* |rec->length| and we checked that there's enough bytes for
* |mac_size| above.
*/
rr->length -= mac_size;
mac = &rr->data[rr->length];
}
i = s->method->ssl3_enc->mac(s, rr, md, 0 /* not send */ );
if (i < 0 || mac == NULL
|| CRYPTO_memcmp(md, mac, (size_t)mac_size) != 0)
enc_err = -1;
if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH + mac_size)
enc_err = -1;
}
if (enc_err < 0) {
/* decryption failed, silently discard message */
rr->length = 0;
RECORD_LAYER_reset_packet_length(&s->rlayer);
goto err;
}
/* r->length is now just compressed */
if (s->expand != NULL) {
if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH) {
al = SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_DTLS1_PROCESS_RECORD,
SSL_R_COMPRESSED_LENGTH_TOO_LONG);
goto f_err;
}
if (!ssl3_do_uncompress(s, rr)) {
al = SSL_AD_DECOMPRESSION_FAILURE;
SSLerr(SSL_F_DTLS1_PROCESS_RECORD, SSL_R_BAD_DECOMPRESSION);
goto f_err;
}
}
if (rr->length > SSL3_RT_MAX_PLAIN_LENGTH) {
al = SSL_AD_RECORD_OVERFLOW;
SSLerr(SSL_F_DTLS1_PROCESS_RECORD, SSL_R_DATA_LENGTH_TOO_LONG);
goto f_err;
}
rr->off = 0;
/*-
* So at this point the following is true
* ssl->s3->rrec.type is the type of record
* ssl->s3->rrec.length == number of bytes in record
* ssl->s3->rrec.off == offset to first valid byte
* ssl->s3->rrec.data == where to take bytes from, increment
* after use :-).
*/
/* we have pulled in a full packet so zero things */
RECORD_LAYER_reset_packet_length(&s->rlayer);
return (1);
f_err:
ssl3_send_alert(s, SSL3_AL_FATAL, al);
err:
return (0);
}
/*
* retrieve a buffered record that belongs to the current epoch, ie,
* processed
*/
#define dtls1_get_processed_record(s) \
dtls1_retrieve_buffered_record((s), \
&(DTLS_RECORD_LAYER_get_processed_rcds(&s->rlayer)))
/*-
* Call this to get a new input record.
* It will return <= 0 if more data is needed, normally due to an error
* or non-blocking IO.
* When it finishes, one packet has been decoded and can be found in
* ssl->s3->rrec.type - is the type of record
* ssl->s3->rrec.data, - data
* ssl->s3->rrec.length, - number of bytes
*/
/* used only by dtls1_read_bytes */
int dtls1_get_record(SSL *s)
{
int ssl_major, ssl_minor;
int i, n;
SSL3_RECORD *rr;
unsigned char *p = NULL;
unsigned short version;
DTLS1_BITMAP *bitmap;
unsigned int is_next_epoch;
rr = RECORD_LAYER_get_rrec(&s->rlayer);
/*
* The epoch may have changed. If so, process all the pending records.
* This is a non-blocking operation.
*/
if (dtls1_process_buffered_records(s) < 0)
return -1;
/* if we're renegotiating, then there may be buffered records */
if (dtls1_get_processed_record(s))
return 1;
/* get something from the wire */
again:
/* check if we have the header */
if ((RECORD_LAYER_get_rstate(&s->rlayer) != SSL_ST_READ_BODY) ||
(RECORD_LAYER_get_packet_length(&s->rlayer) < DTLS1_RT_HEADER_LENGTH)) {
n = ssl3_read_n(s, DTLS1_RT_HEADER_LENGTH,
SSL3_BUFFER_get_len(&s->rlayer.rbuf), 0, 1);
/* read timeout is handled by dtls1_read_bytes */
if (n <= 0)
return (n); /* error or non-blocking */
/* this packet contained a partial record, dump it */
if (RECORD_LAYER_get_packet_length(&s->rlayer) != DTLS1_RT_HEADER_LENGTH) {
RECORD_LAYER_reset_packet_length(&s->rlayer);
goto again;
}
RECORD_LAYER_set_rstate(&s->rlayer, SSL_ST_READ_BODY);
p = RECORD_LAYER_get_packet(&s->rlayer);
if (s->msg_callback)
s->msg_callback(0, 0, SSL3_RT_HEADER, p, DTLS1_RT_HEADER_LENGTH,
s, s->msg_callback_arg);
/* Pull apart the header into the DTLS1_RECORD */
rr->type = *(p++);
ssl_major = *(p++);
ssl_minor = *(p++);
version = (ssl_major << 8) | ssl_minor;
/* sequence number is 64 bits, with top 2 bytes = epoch */
n2s(p, rr->epoch);
memcpy(&(RECORD_LAYER_get_read_sequence(&s->rlayer)[2]), p, 6);
p += 6;
n2s(p, rr->length);
/* Lets check version */
if (!s->first_packet) {
if (version != s->version) {
/* unexpected version, silently discard */
rr->length = 0;
RECORD_LAYER_reset_packet_length(&s->rlayer);
goto again;
}
}
if ((version & 0xff00) != (s->version & 0xff00)) {
/* wrong version, silently discard record */
rr->length = 0;
RECORD_LAYER_reset_packet_length(&s->rlayer);
goto again;
}
if (rr->length > SSL3_RT_MAX_ENCRYPTED_LENGTH) {
/* record too long, silently discard it */
rr->length = 0;
RECORD_LAYER_reset_packet_length(&s->rlayer);
goto again;
}
/* now s->rlayer.rstate == SSL_ST_READ_BODY */
}
/* s->rlayer.rstate == SSL_ST_READ_BODY, get and decode the data */
if (rr->length >
RECORD_LAYER_get_packet_length(&s->rlayer) - DTLS1_RT_HEADER_LENGTH) {
/* now s->packet_length == DTLS1_RT_HEADER_LENGTH */
i = rr->length;
n = ssl3_read_n(s, i, i, 1, 1);
/* this packet contained a partial record, dump it */
if (n != i) {
rr->length = 0;
RECORD_LAYER_reset_packet_length(&s->rlayer);
goto again;
}
/*
* now n == rr->length, and s->packet_length ==
* DTLS1_RT_HEADER_LENGTH + rr->length
*/
}
/* set state for later operations */
RECORD_LAYER_set_rstate(&s->rlayer, SSL_ST_READ_HEADER);
/* match epochs. NULL means the packet is dropped on the floor */
bitmap = dtls1_get_bitmap(s, rr, &is_next_epoch);
if (bitmap == NULL) {
rr->length = 0;
RECORD_LAYER_reset_packet_length(&s->rlayer); /* dump this record */
goto again; /* get another record */
}
#ifndef OPENSSL_NO_SCTP
/* Only do replay check if no SCTP bio */
if (!BIO_dgram_is_sctp(SSL_get_rbio(s))) {
#endif
/* Check whether this is a repeat, or aged record. */
if (!dtls1_record_replay_check(s, bitmap)) {
rr->length = 0;
RECORD_LAYER_reset_packet_length(&s->rlayer); /* dump this record */
goto again; /* get another record */
}
#ifndef OPENSSL_NO_SCTP
}
#endif
/* just read a 0 length packet */
if (rr->length == 0)
goto again;
/*
* If this record is from the next epoch (either HM or ALERT), and a
* handshake is currently in progress, buffer it since it cannot be
* processed at this time.
*/
if (is_next_epoch) {
if ((SSL_in_init(s) || ossl_statem_get_in_handshake(s))) {
if (dtls1_buffer_record
(s, &(DTLS_RECORD_LAYER_get_unprocessed_rcds(&s->rlayer)),
rr->seq_num) < 0)
return -1;
/* Mark receipt of record. */
dtls1_record_bitmap_update(s, bitmap);
}
rr->length = 0;
RECORD_LAYER_reset_packet_length(&s->rlayer);
goto again;
}
if (!dtls1_process_record(s)) {
rr->length = 0;
RECORD_LAYER_reset_packet_length(&s->rlayer); /* dump this record */
goto again; /* get another record */
}
dtls1_record_bitmap_update(s, bitmap); /* Mark receipt of record. */
return (1);
}
Reference in New Issue View Git Blame Copy Permalink