mirror/openssl
2
0
Fork 0
mirror of https://github.com/openssl/openssl.git synced 2024-12-03 05:41:46 +08:00
Code Issues Packages Projects Releases Wiki Activity
cfe1d9929e
openssl/crypto/poly1305/asm/poly1305-c64xplus.pl
Rich Salz 6aa36e8e5a Add OpenSSL copyright to .pl files 
Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-05-21 08:23:39 -04:00

332 lines
8.5 KiB
Perl
Executable File
Raw Blame History

#! /usr/bin/env perl
# Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the OpenSSL license (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
#
# ====================================================================
# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
# ====================================================================
#
# Poly1305 hash for C64x+.
#
# October 2015
#
# Performance is [incredible for a 32-bit processor] 1.82 cycles per
# processed byte. Comparison to compiler-generated code is problematic,
# because results were observed to vary from 2.1 to 7.6 cpb depending
# on compiler's ability to inline small functions. Compiler also
# disables interrupts for some reason, thus making interrupt response
# time dependent on input length. This module on the other hand is free
# from such limitation.
$output=pop;
open STDOUT,">$output";
($CTXA,$INPB,$LEN,$PADBIT)=("A4","B4","A6","B6");
($H0,$H1,$H2,$H3,$H4,$H4a)=("A8","B8","A10","B10","B2",$LEN);
($D0,$D1,$D2,$D3)= ("A9","B9","A11","B11");
($R0,$R1,$R2,$R3,$S1,$S2,$S3,$S3b)=("A0","B0","A1","B1","A12","B12","A13","B13");
($THREE,$R0b,$S2a)=("B7","B5","A5");
$code.=<<___;
.text
.if .ASSEMBLER_VERSION<7000000
.asg 0,__TI_EABI__
.endif
.if __TI_EABI__
.asg poly1305_init,_poly1305_init
.asg poly1305_blocks,_poly1305_blocks
.asg poly1305_emit,_poly1305_emit
.endif
.asg B3,RA
.asg A15,FP
.asg B15,SP
.if .LITTLE_ENDIAN
.asg MV,SWAP2
.asg MV.L,SWAP4
.endif
.global _poly1305_init
_poly1305_init:
.asmfunc
LDNDW *${INPB}[0],B17:B16 ; load key material
LDNDW *${INPB}[1],A17:A16
|| ZERO B9:B8
|| MVK -1,B0
STDW B9:B8,*${CTXA}[0] ; initialize h1:h0
|| SHRU B0,4,B0 ; 0x0fffffff
|| MVK -4,B1
STDW B9:B8,*${CTXA}[1] ; initialize h3:h2
|| AND B0,B1,B1 ; 0x0ffffffc
STW B8,*${CTXA}[4] ; initialize h4
.if .BIG_ENDIAN
SWAP2 B16,B17
|| SWAP2 B17,B16
SWAP2 A16,A17
|| SWAP2 A17,A16
SWAP4 B16,B16
|| SWAP4 A16,A16
SWAP4 B17,B17
|| SWAP4 A17,A17
.endif
AND B16,B0,B20 ; r0 = key[0] & 0x0fffffff
|| AND B17,B1,B22 ; r1 = key[1] & 0x0ffffffc
|| EXTU B17,4,6,B16 ; r1>>2
AND A16,B1,B21 ; r2 = key[2] & 0x0ffffffc
|| AND A17,B1,A23 ; r3 = key[3] & 0x0ffffffc
|| BNOP RA
SHRU B21,2,B18
|| ADD B22,B16,B16 ; s1 = r1 + r1>>2
STDW B21:B20,*${CTXA}[3] ; save r2:r0
|| ADD B21,B18,B18 ; s2 = r2 + r2>>2
|| SHRU A23,2,B17
|| MV A23,B23
STDW B23:B22,*${CTXA}[4] ; save r3:r1
|| ADD B23,B17,B19 ; s3 = r3 + r3>>2
|| ADD B23,B17,B17 ; s3 = r3 + r3>>2
STDW B17:B16,*${CTXA}[5] ; save s3:s1
STDW B19:B18,*${CTXA}[6] ; save s3:s2
|| ZERO A4 ; return 0
.endasmfunc
.global _poly1305_blocks
.align 32
_poly1305_blocks:
.asmfunc stack_usage(40)
SHRU $LEN,4,A2 ; A2 is loop counter, number of blocks
[!A2] BNOP RA ; no data
|| [A2] STW FP,*SP--(40) ; save frame pointer and alloca(40)
|| [A2] MV SP,FP
[A2] STDW B13:B12,*SP[4] ; ABI says so
|| [A2] MV $CTXA,$S3b ; borrow $S3b
[A2] STDW B11:B10,*SP[3]
|| [A2] STDW A13:A12,*FP[-3]
[A2] STDW A11:A10,*FP[-4]
|| [A2] LDDW *${S3b}[0],B25:B24 ; load h1:h0
[A2] LDNW *${INPB}++[4],$D0 ; load inp[0]
[A2] LDNW *${INPB}[-3],$D1 ; load inp[1]
LDDW *${CTXA}[1],B29:B28 ; load h3:h2, B28 is h2
LDNW *${INPB}[-2],$D2 ; load inp[2]
LDNW *${INPB}[-1],$D3 ; load inp[3]
LDDW *${CTXA}[3],$R2:$R0 ; load r2:r0
|| LDDW *${S3b}[4],$R3:$R1 ; load r3:r1
|| SWAP2 $D0,$D0
LDDW *${CTXA}[5],$S3:$S1 ; load s3:s1
|| LDDW *${S3b}[6],$S3b:$S2 ; load s3:s2
|| SWAP4 $D0,$D0
|| SWAP2 $D1,$D1
ADDU $D0,B24,$D0:$H0 ; h0+=inp[0]
|| ADD $D0,B24,B27 ; B-copy of h0+inp[0]
|| SWAP4 $D1,$D1
ADDU $D1,B25,$D1:$H1 ; h1+=inp[1]
|| MVK 3,$THREE
|| SWAP2 $D2,$D2
LDW *${CTXA}[4],$H4 ; load h4
|| SWAP4 $D2,$D2
|| MV B29,B30 ; B30 is h3
MV $R0,$R0b
loop?:
MPY32U $H0,$R0,A17:A16
|| MPY32U B27,$R1,B17:B16 ; MPY32U $H0,$R1,B17:B16
|| ADDU $D0,$D1:$H1,B25:B24 ; ADDU $D0,$D1:$H1,$D1:$H1
|| ADDU $D2,B28,$D2:$H2 ; h2+=inp[2]
|| SWAP2 $D3,$D3
MPY32U $H0,$R2,A19:A18
|| MPY32U B27,$R3,B19:B18 ; MPY32U $H0,$R3,B19:B18
|| ADD $D0,$H1,A24 ; A-copy of B24
|| SWAP4 $D3,$D3
|| [A2] SUB A2,1,A2 ; decrement loop counter
MPY32U A24,$S3,A21:A20 ; MPY32U $H1,$S3,A21:A20
|| MPY32U B24,$R0b,B21:B20 ; MPY32U $H1,$R0,B21:B20
|| ADDU B25,$D2:$H2,$D2:$H2 ; ADDU $D1,$D2:$H2,$D2:$H2
|| ADDU $D3,B30,$D3:$H3 ; h3+=inp[3]
|| ADD B25,$H2,B25 ; B-copy of $H2
MPY32U A24,$R1,A23:A22 ; MPY32U $H1,$R1,A23:A22
|| MPY32U B24,$R2,B23:B22 ; MPY32U $H1,$R2,B23:B22
MPY32U $H2,$S2,A25:A24
|| MPY32U B25,$S3b,B25:B24 ; MPY32U $H2,$S3,B25:B24
|| ADDU $D2,$D3:$H3,$D3:$H3
|| ADD $PADBIT,$H4,$H4 ; h4+=padbit
MPY32U $H2,$R0,A27:A26
|| MPY32U $H2,$R1,B27:B26
|| ADD $D3,$H4,$H4
|| MV $S2,$S2a
MPY32U $H3,$S1,A29:A28
|| MPY32U $H3,$S2,B29:B28
|| ADD A21,A17,A21 ; start accumulating "d3:d0"
|| ADD B21,B17,B21
|| ADDU A20,A16,A17:A16
|| ADDU B20,B16,B17:B16
|| [A2] LDNW *${INPB}++[4],$D0 ; load inp[0]
MPY32U $H3,$S3,A31:A30
|| MPY32U $H3,$R0b,B31:B30
|| ADD A23,A19,A23
|| ADD B23,B19,B23
|| ADDU A22,A18,A19:A18
|| ADDU B22,B18,B19:B18
|| [A2] LDNW *${INPB}[-3],$D1 ; load inp[1]
MPY32 $H4,$S1,B20
|| MPY32 $H4,$S2a,A20
|| ADD A25,A21,A21
|| ADD B25,B21,B21
|| ADDU A24,A17:A16,A17:A16
|| ADDU B24,B17:B16,B17:B16
|| [A2] LDNW *${INPB}[-2],$D2 ; load inp[2]
MPY32 $H4,$S3b,B22
|| ADD A27,A23,A23
|| ADD B27,B23,B23
|| ADDU A26,A19:A18,A19:A18
|| ADDU B26,B19:B18,B19:B18
|| [A2] LDNW *${INPB}[-1],$D3 ; load inp[3]
MPY32 $H4,$R0b,$H4
|| ADD A29,A21,A21 ; final hi("d0")
|| ADD B29,B21,B21 ; final hi("d1")
|| ADDU A28,A17:A16,A17:A16 ; final lo("d0")
|| ADDU B28,B17:B16,B17:B16
ADD A31,A23,A23 ; final hi("d2")
|| ADD B31,B23,B23 ; final hi("d3")
|| ADDU A30,A19:A18,A19:A18
|| ADDU B30,B19:B18,B19:B18
ADDU B20,B17:B16,B17:B16 ; final lo("d1")
|| ADDU A20,A19:A18,A19:A18 ; final lo("d2")
ADDU B22,B19:B18,B19:B18 ; final lo("d3")
|| ADD A17,A21,A21 ; "flatten" "d3:d0"
MV A19,B29 ; move to avoid cross-path stalls
ADDU A21,B17:B16,B27:B26 ; B26 is h1
ADD B21,B27,B27
|| DMV B29,A18,B29:B28 ; move to avoid cross-path stalls
ADDU B27,B29:B28,B29:B28 ; B28 is h2
|| [A2] SWAP2 $D0,$D0
ADD A23,B29,B29
|| [A2] SWAP4 $D0,$D0
ADDU B29,B19:B18,B31:B30 ; B30 is h3
ADD B23,B31,B31
|| MV A16,B24 ; B24 is h0
|| [A2] SWAP2 $D1,$D1
ADD B31,$H4,$H4
|| [A2] SWAP4 $D1,$D1
SHRU $H4,2,B16 ; last reduction step
|| AND $H4,$THREE,$H4
ADDAW B16,B16,B16 ; 5*(h4>>2)
|| [A2] BNOP loop?
ADDU B24,B16,B25:B24 ; B24 is h0
|| [A2] SWAP2 $D2,$D2
ADDU B26,B25,B27:B26 ; B26 is h1
|| [A2] SWAP4 $D2,$D2
ADDU B28,B27,B29:B28 ; B28 is h2
|| [A2] ADDU $D0,B24,$D0:$H0 ; h0+=inp[0]
|| [A2] ADD $D0,B24,B27 ; B-copy of h0+inp[0]
ADDU B30,B29,B31:B30 ; B30 is h3
ADD B31,$H4,$H4
|| [A2] ADDU $D1,B26,$D1:$H1 ; h1+=inp[1]
;;===== branch to loop? is taken here
LDDW *FP[-4],A11:A10 ; ABI says so
LDDW *FP[-3],A13:A12
|| LDDW *SP[3],B11:B10
LDDW *SP[4],B13:B12
|| MV B26,B25
|| BNOP RA
LDW *++SP(40),FP ; restore frame pointer
|| MV B30,B29
STDW B25:B24,*${CTXA}[0] ; save h1:h0
STDW B29:B28,*${CTXA}[1] ; save h3:h2
STW $H4,*${CTXA}[4] ; save h4
NOP 1
.endasmfunc
___
{
my ($MAC,$NONCEA,$NONCEB)=($INPB,$LEN,$PADBIT);
$code.=<<___;
.global _poly1305_emit
.align 32
_poly1305_emit:
.asmfunc
LDDW *${CTXA}[0],A17:A16 ; load h1:h0
LDDW *${CTXA}[1],A19:A18 ; load h3:h2
LDW *${CTXA}[4],A20 ; load h4
MV $NONCEA,$NONCEB
MVK 5,A22 ; compare to modulus
ADDU A16,A22,A23:A22
|| LDW *${NONCEA}[0],A8
|| LDW *${NONCEB}[1],B8
ADDU A17,A23,A25:A24
|| LDW *${NONCEA}[2],A9
|| LDW *${NONCEB}[3],B9
ADDU A19,A25,A27:A26
ADDU A19,A27,A29:A28
ADD A20,A29,A29
SHRU A29,2,A2 ; check for overflow in 130-th bit
[A2] MV A22,A16 ; select
|| [A2] MV A24,A17
[A2] MV A26,A18
|| [A2] MV A28,A19
|| ADDU A8,A16,A23:A22 ; accumulate nonce
ADDU B8,A17,A25:A24
|| SWAP2 A22,A22
ADDU A23,A25:A24,A25:A24
ADDU A9,A18,A27:A26
|| SWAP2 A24,A24
ADDU A25,A27:A26,A27:A26
|| ADD B9,A19,A28
ADD A27,A28,A28
|| SWAP2 A26,A26
.if .BIG_ENDIAN
SWAP2 A28,A28
|| SWAP4 A22,A22
|| SWAP4 A24,B24
SWAP4 A26,A26
SWAP4 A28,A28
|| MV B24,A24
.endif
BNOP RA,1
STNW A22,*${MAC}[0] ; write the result
STNW A24,*${MAC}[1]
STNW A26,*${MAC}[2]
STNW A28,*${MAC}[3]
.endasmfunc
___
}
$code.=<<___;
.sect .const
.cstring "Poly1305 for C64x+, CRYPTOGAMS by <appro\@openssl.org>"
.align 4
___
print $code;
Reference in New Issue View Git Blame Copy Permalink