openssl/test/recipes/80-test_ssl_old.t
Rich Salz 433deaffce Use .cnf for config files, not .conf
The default is openssl.cnf  The project seems to prefer xxx.conf these
days, but we should use the default convention.

Rename all foo.conf (except for Configurations) to foo.cnf

Fixes #11174

Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11176)
2020-03-06 18:25:13 +01:00

552 lines
19 KiB
Perl

#! /usr/bin/env perl
# Copyright 2015-2018 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the Apache License 2.0 (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
use strict;
use warnings;
use POSIX;
use File::Basename;
use File::Copy;
use OpenSSL::Test qw/:DEFAULT with bldtop_file srctop_file cmdstr/;
use OpenSSL::Test::Utils;
setup("test_ssl");
$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.cnf");
my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_psk,
$no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2, $no_tls1_3,
$no_dtls, $no_dtls1, $no_dtls1_2, $no_ct) =
anydisabled qw/rsa dsa dh ec psk
ssl3 tls1 tls1_1 tls1_2 tls1_3
dtls dtls1 dtls1_2 ct/;
my $no_anytls = alldisabled(available_protocols("tls"));
my $no_anydtls = alldisabled(available_protocols("dtls"));
plan skip_all => "No SSL/TLS/DTLS protocol is support by this OpenSSL build"
if $no_anytls && $no_anydtls;
my $digest = "-sha1";
my @reqcmd = ("openssl", "req");
my @x509cmd = ("openssl", "x509", $digest);
my @verifycmd = ("openssl", "verify");
my @genpkeycmd = ("openssl", "genpkey");
my $dummycnf = srctop_file("apps", "openssl.cnf");
my $CAkey = "keyCA.ss";
my $CAcert="certCA.ss";
my $CAserial="certCA.srl";
my $CAreq="reqCA.ss";
my $CAconf=srctop_file("test","CAss.cnf");
my $CAreq2="req2CA.ss"; # temp
my $Uconf=srctop_file("test","Uss.cnf");
my $Ukey="keyU.ss";
my $Ureq="reqU.ss";
my $Ucert="certU.ss";
my $Dkey="keyD.ss";
my $Dreq="reqD.ss";
my $Dcert="certD.ss";
my $Ekey="keyE.ss";
my $Ereq="reqE.ss";
my $Ecert="certE.ss";
my $P1conf=srctop_file("test","P1ss.cnf");
my $P1key="keyP1.ss";
my $P1req="reqP1.ss";
my $P1cert="certP1.ss";
my $P1intermediate="tmp_intP1.ss";
my $P2conf=srctop_file("test","P2ss.cnf");
my $P2key="keyP2.ss";
my $P2req="reqP2.ss";
my $P2cert="certP2.ss";
my $P2intermediate="tmp_intP2.ss";
my $server_sess="server.ss";
my $client_sess="client.ss";
# ssltest_old.c is deprecated in favour of the new framework in ssl_test.c
# If you're adding tests here, you probably want to convert them to the
# new format in ssl_test.c and add recipes to 80-test_ssl_new.t instead.
plan tests =>
1 # For testss
+5 # For the first testssl
;
subtest 'test_ss' => sub {
if (testss()) {
open OUT, ">", "intP1.ss";
copy($CAcert, \*OUT); copy($Ucert, \*OUT);
close OUT;
open OUT, ">", "intP2.ss";
copy($CAcert, \*OUT); copy($Ucert, \*OUT); copy($P1cert, \*OUT);
close OUT;
}
};
note('test_ssl -- key U');
testssl("keyU.ss", $Ucert, $CAcert);
# -----------
# subtest functions
sub testss {
my @req_dsa = ("-newkey",
"dsa:".srctop_file("apps", "dsa1024.pem"));
my $dsaparams = srctop_file("apps", "dsa1024.pem");
my @req_new;
if ($no_rsa) {
@req_new = @req_dsa;
} else {
@req_new = ("-new");
}
plan tests => 17;
SKIP: {
skip 'failure', 16 unless
ok(run(app([@reqcmd, "-config", $CAconf,
"-out", $CAreq, "-keyout", $CAkey,
@req_new])),
'make cert request');
skip 'failure', 15 unless
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30",
"-req", "-out", $CAcert, "-signkey", $CAkey,
"-extfile", $CAconf, "-extensions", "v3_ca"],
stdout => "err.ss")),
'convert request into self-signed cert');
skip 'failure', 14 unless
ok(run(app([@x509cmd, "-in", $CAcert,
"-x509toreq", "-signkey", $CAkey, "-out", $CAreq2],
stdout => "err.ss")),
'convert cert into a cert request');
skip 'failure', 13 unless
ok(run(app([@reqcmd, "-config", $dummycnf,
"-verify", "-in", $CAreq, "-noout"])),
'verify request 1');
skip 'failure', 12 unless
ok(run(app([@reqcmd, "-config", $dummycnf,
"-verify", "-in", $CAreq2, "-noout"])),
'verify request 2');
skip 'failure', 11 unless
ok(run(app([@verifycmd, "-CAfile", $CAcert, $CAcert])),
'verify signature');
skip 'failure', 10 unless
ok(run(app([@reqcmd, "-config", $Uconf,
"-out", $Ureq, "-keyout", $Ukey, @req_new],
stdout => "err.ss")),
'make a user cert request');
skip 'failure', 9 unless
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30",
"-req", "-out", $Ucert,
"-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial,
"-extfile", $Uconf, "-extensions", "v3_ee"],
stdout => "err.ss"))
&& run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])),
'sign user cert request');
skip 'failure', 8 unless
ok(run(app([@x509cmd,
"-subject", "-issuer", "-startdate", "-enddate",
"-noout", "-in", $Ucert])),
'Certificate details');
skip 'failure', 7 unless
subtest 'DSA certificate creation' => sub {
plan skip_all => "skipping DSA certificate creation"
if $no_dsa;
plan tests => 5;
SKIP: {
$ENV{CN2} = "DSA Certificate";
skip 'failure', 4 unless
ok(run(app([@genpkeycmd, "-out", $Dkey,
"-paramfile", $dsaparams],
stdout => "err.ss")),
"make a DSA key");
skip 'failure', 3 unless
ok(run(app([@reqcmd, "-new", "-config", $Uconf,
"-out", $Dreq, "-key", $Dkey],
stdout => "err.ss")),
"make a DSA user cert request");
skip 'failure', 2 unless
ok(run(app([@x509cmd, "-CAcreateserial",
"-in", $Dreq,
"-days", "30",
"-req",
"-out", $Dcert,
"-CA", $CAcert, "-CAkey", $CAkey,
"-CAserial", $CAserial,
"-extfile", $Uconf,
"-extensions", "v3_ee_dsa"],
stdout => "err.ss")),
"sign DSA user cert request");
skip 'failure', 1 unless
ok(run(app([@verifycmd, "-CAfile", $CAcert, $Dcert])),
"verify DSA user cert");
skip 'failure', 0 unless
ok(run(app([@x509cmd,
"-subject", "-issuer",
"-startdate", "-enddate", "-noout",
"-in", $Dcert])),
"DSA Certificate details");
}
};
skip 'failure', 6 unless
subtest 'ECDSA/ECDH certificate creation' => sub {
plan skip_all => "skipping ECDSA/ECDH certificate creation"
if $no_ec;
plan tests => 5;
SKIP: {
$ENV{CN2} = "ECDSA Certificate";
skip 'failure', 4 unless
ok(run(app(["openssl", "genpkey", "-genparam",
"-algorithm", "EC",
"-pkeyopt", "ec_paramgen_curve:P-256",
"-pkeyopt", "ec_param_enc:named_curve",
"-out", "ecp.ss"])),
"make EC parameters");
skip 'failure', 3 unless
ok(run(app([@reqcmd, "-config", $Uconf,
"-out", $Ereq, "-keyout", $Ekey,
"-newkey", "ec:ecp.ss"],
stdout => "err.ss")),
"make a ECDSA/ECDH user cert request");
skip 'failure', 2 unless
ok(run(app([@x509cmd, "-CAcreateserial",
"-in", $Ereq,
"-days", "30",
"-req",
"-out", $Ecert,
"-CA", $CAcert, "-CAkey", $CAkey,
"-CAserial", $CAserial,
"-extfile", $Uconf,
"-extensions", "v3_ee_ec"],
stdout => "err.ss")),
"sign ECDSA/ECDH user cert request");
skip 'failure', 1 unless
ok(run(app([@verifycmd, "-CAfile", $CAcert, $Ecert])),
"verify ECDSA/ECDH user cert");
skip 'failure', 0 unless
ok(run(app([@x509cmd,
"-subject", "-issuer",
"-startdate", "-enddate", "-noout",
"-in", $Ecert])),
"ECDSA Certificate details");
}
};
skip 'failure', 5 unless
ok(run(app([@reqcmd, "-config", $P1conf,
"-out", $P1req, "-keyout", $P1key, @req_new],
stdout => "err.ss")),
'make a proxy cert request');
skip 'failure', 4 unless
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30",
"-req", "-out", $P1cert,
"-CA", $Ucert, "-CAkey", $Ukey,
"-extfile", $P1conf, "-extensions", "v3_proxy"],
stdout => "err.ss")),
'sign proxy with user cert');
copy($Ucert, $P1intermediate);
run(app([@verifycmd, "-CAfile", $CAcert,
"-untrusted", $P1intermediate, $P1cert]));
ok(run(app([@x509cmd,
"-subject", "-issuer", "-startdate", "-enddate",
"-noout", "-in", $P1cert])),
'Certificate details');
skip 'failure', 2 unless
ok(run(app([@reqcmd, "-config", $P2conf,
"-out", $P2req, "-keyout", $P2key,
@req_new],
stdout => "err.ss")),
'make another proxy cert request');
skip 'failure', 1 unless
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30",
"-req", "-out", $P2cert,
"-CA", $P1cert, "-CAkey", $P1key,
"-extfile", $P2conf, "-extensions", "v3_proxy"],
stdout => "err.ss")),
'sign second proxy cert request with the first proxy cert');
open OUT, ">", $P2intermediate;
copy($Ucert, \*OUT); copy($P1cert, \*OUT);
close OUT;
run(app([@verifycmd, "-CAfile", $CAcert,
"-untrusted", $P2intermediate, $P2cert]));
ok(run(app([@x509cmd,
"-subject", "-issuer", "-startdate", "-enddate",
"-noout", "-in", $P2cert])),
'Certificate details');
}
}
sub testssl {
my ($key, $cert, $CAtmp) = @_;
my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs"));
my @ssltest = ("ssltest_old",
"-s_key", $key, "-s_cert", $cert,
"-c_key", $key, "-c_cert", $cert);
my $serverinfo = srctop_file("test","serverinfo.pem");
my $dsa_cert = 0;
if (grep /DSA Public Key/, run(app(["openssl", "x509", "-in", $cert,
"-text", "-noout"]), capture => 1)) {
$dsa_cert = 1;
}
# plan tests => 11;
subtest 'standard SSL tests' => sub {
######################################################################
plan tests => 13;
SKIP: {
skip "SSLv3 is not supported by this OpenSSL build", 4
if disabled("ssl3");
ok(run(test([@ssltest, "-bio_pair", "-ssl3"])),
'test sslv3 via BIO pair');
ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA])),
'test sslv3 with server authentication via BIO pair');
ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA])),
'test sslv3 with client authentication via BIO pair');
ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA])),
'test sslv3 with both server and client authentication via BIO pair');
}
SKIP: {
skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1
if $no_anytls;
ok(run(test([@ssltest, "-bio_pair"])),
'test sslv2/sslv3 via BIO pair');
}
SKIP: {
skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 8
if $no_anytls;
SKIP: {
skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert;
ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe"])),
'test sslv2/sslv3 w/o (EC)DHE via BIO pair');
}
ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v"])),
'test sslv2/sslv3 with 1024bit DHE via BIO pair');
ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA])),
'test sslv2/sslv3 with server authentication');
ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA])),
'test sslv2/sslv3 with client authentication via BIO pair');
ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA])),
'test sslv2/sslv3 with both client and server authentication via BIO pair');
ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA])),
'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify');
SKIP: {
skip "No IPv4 available on this machine", 1
unless !disabled("sock") && have_IPv4();
ok(run(test([@ssltest, "-ipv4"])),
'test TLS via IPv4');
}
SKIP: {
skip "No IPv6 available on this machine", 1
unless !disabled("sock") && have_IPv6();
ok(run(test([@ssltest, "-ipv6"])),
'test TLS via IPv6');
}
}
};
subtest "Testing ciphersuites" => sub {
my @exkeys = ();
my $ciphers = "-PSK:-SRP";
if (!$no_dsa) {
push @exkeys, "-s_cert", "certD.ss", "-s_key", "keyD.ss";
}
if (!$no_ec) {
push @exkeys, "-s_cert", "certE.ss", "-s_key", "keyE.ss";
}
my @protocols = ();
# We only use the flags that ssltest_old understands
push @protocols, "-tls1_3" unless $no_tls1_3;
push @protocols, "-tls1_2" unless $no_tls1_2;
push @protocols, "-tls1" unless $no_tls1;
push @protocols, "-ssl3" unless $no_ssl3;
my $protocolciphersuitecount = 0;
my %ciphersuites = ();
my %ciphersstatus = ();
foreach my $protocol (@protocols) {
my $ciphersstatus = undef;
my @ciphers = run(app(["openssl", "ciphers", "-s", $protocol,
"ALL:$ciphers"]),
capture => 1, statusvar => \$ciphersstatus);
$ciphersstatus{$protocol} = $ciphersstatus;
if ($ciphersstatus) {
$ciphersuites{$protocol} = [ map { s|\R||; split(/:/, $_) }
@ciphers ];
$protocolciphersuitecount += scalar @{$ciphersuites{$protocol}};
}
}
plan skip_all => "None of the ciphersuites to test are available in this OpenSSL build"
if $protocolciphersuitecount + scalar(keys %ciphersuites) == 0;
# The count of protocols is because in addition to the ciphersuites
# we got above, we're running a weak DH test for each protocol (except
# TLSv1.3)
my $testcount = scalar(@protocols) + $protocolciphersuitecount
+ scalar(keys %ciphersuites);
$testcount-- unless $no_tls1_3;
plan tests => $testcount;
foreach my $protocol (@protocols) {
ok($ciphersstatus{$protocol}, "Getting ciphers for $protocol");
}
foreach my $protocol (sort keys %ciphersuites) {
note "Testing ciphersuites for $protocol";
# ssltest_old doesn't know -tls1_3, but that's fine, since that's
# the default choice if TLSv1.3 enabled
my $flag = $protocol eq "-tls1_3" ? "" : $protocol;
my $ciphersuites = "";
foreach my $cipher (@{$ciphersuites{$protocol}}) {
if ($protocol eq "-ssl3" && $cipher =~ /ECDH/ ) {
note "*****SKIPPING $protocol $cipher";
ok(1);
} else {
if ($protocol eq "-tls1_3") {
$ciphersuites = $cipher;
$cipher = "";
}
ok(run(test([@ssltest, @exkeys, "-cipher", $cipher,
"-ciphersuites", $ciphersuites, $flag || ()])),
"Testing $cipher");
}
}
next if $protocol eq "-tls1_3";
is(run(test([@ssltest,
"-s_cipher", "EDH",
"-c_cipher", 'EDH:@SECLEVEL=1',
"-dhe512",
$protocol])), 0,
"testing connection with weak DH, expecting failure");
}
};
subtest 'RSA/(EC)DHE/PSK tests' => sub {
######################################################################
plan tests => 5;
SKIP: {
skip "TLSv1.0 is not supported by this OpenSSL build", 5
if $no_tls1;
SKIP: {
skip "skipping anonymous DH tests", 1
if ($no_dh);
ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time"])),
'test tlsv1 with 1024bit anonymous DH, multiple handshakes');
}
SKIP: {
skip "skipping RSA tests", 2
if $no_rsa;
ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time"])),
'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');
skip "skipping RSA+DHE tests", 1
if $no_dh;
ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time"])),
'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');
}
SKIP: {
skip "skipping PSK tests", 2
if ($no_psk);
ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
'test tls1 with PSK');
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
'test tls1 with PSK via BIO pair');
}
}
};
subtest 'Custom Extension tests' => sub {
######################################################################
plan tests => 1;
SKIP: {
skip "TLSv1.0 is not supported by this OpenSSL build", 1
if $no_tls1;
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])),
'test tls1 with custom extensions');
}
};
subtest 'Serverinfo tests' => sub {
######################################################################
plan tests => 5;
SKIP: {
skip "TLSv1.0 is not supported by this OpenSSL build", 5
if $no_tls1;
note('echo test tls1 with serverinfo');
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
}
};
}