openssl/crypto/mem.c
Tomas Mraz 3b107b86ca Windows: use srand() instead of srandom()
This is used for memory allocation failure debugging only

Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22347)
2023-10-13 15:04:42 +02:00

362 lines
8.7 KiB
C

/*
* Copyright 1995-2023 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the Apache License 2.0 (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
* in the file LICENSE in the source distribution or at
* https://www.openssl.org/source/license.html
*/
#include "internal/e_os.h"
#include "internal/cryptlib.h"
#include "crypto/cryptlib.h"
#include <stdio.h>
#include <stdlib.h>
#include <limits.h>
#include <openssl/crypto.h>
/*
* the following pointers may be changed as long as 'allow_customize' is set
*/
static int allow_customize = 1;
static CRYPTO_malloc_fn malloc_impl = CRYPTO_malloc;
static CRYPTO_realloc_fn realloc_impl = CRYPTO_realloc;
static CRYPTO_free_fn free_impl = CRYPTO_free;
#if !defined(OPENSSL_NO_CRYPTO_MDEBUG) && !defined(FIPS_MODULE)
# include "internal/tsan_assist.h"
# ifdef TSAN_REQUIRES_LOCKING
# define INCREMENT(x) /* empty */
# define LOAD(x) 0
# else /* TSAN_REQUIRES_LOCKING */
static TSAN_QUALIFIER int malloc_count;
static TSAN_QUALIFIER int realloc_count;
static TSAN_QUALIFIER int free_count;
# define INCREMENT(x) tsan_counter(&(x))
# define LOAD(x) tsan_load(&x)
# endif /* TSAN_REQUIRES_LOCKING */
static char *md_failstring;
static long md_count;
static int md_fail_percent = 0;
static int md_tracefd = -1;
static void parseit(void);
static int shouldfail(void);
# define FAILTEST() if (shouldfail()) return NULL
#else
# define INCREMENT(x) /* empty */
# define FAILTEST() /* empty */
#endif
int CRYPTO_set_mem_functions(CRYPTO_malloc_fn malloc_fn,
CRYPTO_realloc_fn realloc_fn,
CRYPTO_free_fn free_fn)
{
if (!allow_customize)
return 0;
if (malloc_fn != NULL)
malloc_impl = malloc_fn;
if (realloc_fn != NULL)
realloc_impl = realloc_fn;
if (free_fn != NULL)
free_impl = free_fn;
return 1;
}
void CRYPTO_get_mem_functions(CRYPTO_malloc_fn *malloc_fn,
CRYPTO_realloc_fn *realloc_fn,
CRYPTO_free_fn *free_fn)
{
if (malloc_fn != NULL)
*malloc_fn = malloc_impl;
if (realloc_fn != NULL)
*realloc_fn = realloc_impl;
if (free_fn != NULL)
*free_fn = free_impl;
}
#if !defined(OPENSSL_NO_CRYPTO_MDEBUG) && !defined(FIPS_MODULE)
void CRYPTO_get_alloc_counts(int *mcount, int *rcount, int *fcount)
{
if (mcount != NULL)
*mcount = LOAD(malloc_count);
if (rcount != NULL)
*rcount = LOAD(realloc_count);
if (fcount != NULL)
*fcount = LOAD(free_count);
}
/*
* Parse a "malloc failure spec" string. This likes like a set of fields
* separated by semicolons. Each field has a count and an optional failure
* percentage. For example:
* 100@0;100@25;0@0
* or 100;100@25;0
* This means 100 mallocs succeed, then next 100 fail 25% of the time, and
* all remaining (count is zero) succeed.
* The failure percentge can have 2 digits after the comma. For example:
* 0@0.01
* This means 0.01% of all allocations will fail.
*/
static void parseit(void)
{
char *semi = strchr(md_failstring, ';');
char *atsign;
if (semi != NULL)
*semi++ = '\0';
/* Get the count (atol will stop at the @ if there), and percentage */
md_count = atol(md_failstring);
atsign = strchr(md_failstring, '@');
md_fail_percent = atsign == NULL ? 0 : (int)(atof(atsign + 1) * 100 + 0.5);
if (semi != NULL)
md_failstring = semi;
}
/*
* Windows doesn't have random() and srandom(), but it has rand() and srand().
* Some rand() implementations aren't good, but we're not
* dealing with secure randomness here.
*/
# ifdef _WIN32
# define random() rand()
# define srandom(seed) srand(seed)
# endif
/*
* See if the current malloc should fail.
*/
static int shouldfail(void)
{
int roll = (int)(random() % 10000);
int shoulditfail = roll < md_fail_percent;
# ifndef _WIN32
/* suppressed on Windows as POSIX-like file descriptors are non-inheritable */
int len;
char buff[80];
if (md_tracefd > 0) {
BIO_snprintf(buff, sizeof(buff),
"%c C%ld %%%d R%d\n",
shoulditfail ? '-' : '+', md_count, md_fail_percent, roll);
len = strlen(buff);
if (write(md_tracefd, buff, len) != len)
perror("shouldfail write failed");
}
# endif
if (md_count) {
/* If we used up this one, go to the next. */
if (--md_count == 0)
parseit();
}
return shoulditfail;
}
void ossl_malloc_setup_failures(void)
{
const char *cp = getenv("OPENSSL_MALLOC_FAILURES");
if (cp != NULL && (md_failstring = strdup(cp)) != NULL)
parseit();
if ((cp = getenv("OPENSSL_MALLOC_FD")) != NULL)
md_tracefd = atoi(cp);
if ((cp = getenv("OPENSSL_MALLOC_SEED")) != NULL)
srandom(atoi(cp));
}
#endif
void *CRYPTO_malloc(size_t num, const char *file, int line)
{
void *ptr;
INCREMENT(malloc_count);
if (malloc_impl != CRYPTO_malloc) {
ptr = malloc_impl(num, file, line);
if (ptr != NULL || num == 0)
return ptr;
goto err;
}
if (num == 0)
return NULL;
FAILTEST();
if (allow_customize) {
/*
* Disallow customization after the first allocation. We only set this
* if necessary to avoid a store to the same cache line on every
* allocation.
*/
allow_customize = 0;
}
ptr = malloc(num);
if (ptr != NULL)
return ptr;
err:
/*
* ossl_err_get_state_int() in err.c uses CRYPTO_zalloc(num, NULL, 0) for
* ERR_STATE allocation. Prevent mem alloc error loop while reporting error.
*/
if (file != NULL || line != 0) {
ERR_new();
ERR_set_debug(file, line, NULL);
ERR_set_error(ERR_LIB_CRYPTO, ERR_R_MALLOC_FAILURE, NULL);
}
return NULL;
}
void *CRYPTO_zalloc(size_t num, const char *file, int line)
{
void *ret;
ret = CRYPTO_malloc(num, file, line);
if (ret != NULL)
memset(ret, 0, num);
return ret;
}
void *CRYPTO_realloc(void *str, size_t num, const char *file, int line)
{
INCREMENT(realloc_count);
if (realloc_impl != CRYPTO_realloc)
return realloc_impl(str, num, file, line);
if (str == NULL)
return CRYPTO_malloc(num, file, line);
if (num == 0) {
CRYPTO_free(str, file, line);
return NULL;
}
FAILTEST();
return realloc(str, num);
}
void *CRYPTO_clear_realloc(void *str, size_t old_len, size_t num,
const char *file, int line)
{
void *ret = NULL;
if (str == NULL)
return CRYPTO_malloc(num, file, line);
if (num == 0) {
CRYPTO_clear_free(str, old_len, file, line);
return NULL;
}
/* Can't shrink the buffer since memcpy below copies |old_len| bytes. */
if (num < old_len) {
OPENSSL_cleanse((char*)str + num, old_len - num);
return str;
}
ret = CRYPTO_malloc(num, file, line);
if (ret != NULL) {
memcpy(ret, str, old_len);
CRYPTO_clear_free(str, old_len, file, line);
}
return ret;
}
void CRYPTO_free(void *str, const char *file, int line)
{
INCREMENT(free_count);
if (free_impl != CRYPTO_free) {
free_impl(str, file, line);
return;
}
free(str);
}
void CRYPTO_clear_free(void *str, size_t num, const char *file, int line)
{
if (str == NULL)
return;
if (num)
OPENSSL_cleanse(str, num);
CRYPTO_free(str, file, line);
}
#if !defined(OPENSSL_NO_CRYPTO_MDEBUG)
# ifndef OPENSSL_NO_DEPRECATED_3_0
int CRYPTO_mem_ctrl(int mode)
{
(void)mode;
return -1;
}
int CRYPTO_set_mem_debug(int flag)
{
(void)flag;
return -1;
}
int CRYPTO_mem_debug_push(const char *info, const char *file, int line)
{
(void)info; (void)file; (void)line;
return 0;
}
int CRYPTO_mem_debug_pop(void)
{
return 0;
}
void CRYPTO_mem_debug_malloc(void *addr, size_t num, int flag,
const char *file, int line)
{
(void)addr; (void)num; (void)flag; (void)file; (void)line;
}
void CRYPTO_mem_debug_realloc(void *addr1, void *addr2, size_t num, int flag,
const char *file, int line)
{
(void)addr1; (void)addr2; (void)num; (void)flag; (void)file; (void)line;
}
void CRYPTO_mem_debug_free(void *addr, int flag,
const char *file, int line)
{
(void)addr; (void)flag; (void)file; (void)line;
}
int CRYPTO_mem_leaks(BIO *b)
{
(void)b;
return -1;
}
# ifndef OPENSSL_NO_STDIO
int CRYPTO_mem_leaks_fp(FILE *fp)
{
(void)fp;
return -1;
}
# endif
int CRYPTO_mem_leaks_cb(int (*cb)(const char *str, size_t len, void *u),
void *u)
{
(void)cb; (void)u;
return -1;
}
# endif
#endif