/* crypto/md32_common.h */ /* ==================================================================== * Copyright (c) 1999 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)" * * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to * endorse or promote products derived from this software without * prior written permission. For written permission, please contact * licensing@OpenSSL.org. * * 5. Products derived from this software may not be called "OpenSSL" * nor may "OpenSSL" appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== * * This product includes cryptographic software written by Eric Young * (eay@cryptsoft.com). This product includes software written by Tim * Hudson (tjh@cryptsoft.com). * */ /* * This is a generic 32 bit "collector" for message digest algorithms. * Whenever needed it collects input character stream into chunks of * 32 bit values and invokes a block function that performs actual hash * calculations. * * Porting guide. * * Obligatory macros: * * DATA_ORDER_IS_BIG_ENDIAN or DATA_ORDER_IS_LITTLE_ENDIAN * this macro defines byte order of input stream. * HASH_CBLOCK * size of a unit chunk HASH_BLOCK operates on. * HASH_LONG * has to be at lest 32 bit wide, if it's wider, then * HASH_LONG_LOG2 *has to* be defined along * HASH_CTX * context structure that at least contains following * members: * typedef struct { * ... * HASH_LONG Nl,Nh; * HASH_LONG data[HASH_LBLOCK]; * int num; * ... * } HASH_CTX; * HASH_UPDATE * name of "Update" function, implemented here. * HASH_TRANSFORM * name of "Transform" function, implemented here. * HASH_FINAL * name of "Final" function, implemented here. * HASH_BLOCK_HOST_ORDER * name of "block" function treating *aligned* input message * in host byte order, implemented externally. * HASH_BLOCK_DATA_ORDER * name of "block" function treating *unaligned* input message * in original (data) byte order, implemented externally (it * actually is optional if data and host are of the same * "endianess"). * * Optional macros: * * B_ENDIAN or L_ENDIAN * defines host byte-order. * HASH_LONG_LOG2 * defaults to 2 if not states otherwise. * HASH_LBLOCK * assumed to be HASH_CBLOCK/4 if not stated otherwise. * HASH_BLOCK_DATA_ORDER_ALIGNED * alternative "block" function capable of treating * aligned input message in original (data) order, * implemented externally. * * MD5 example: * * #define DATA_ORDER_IS_LITTLE_ENDIAN * * #define HASH_LONG MD5_LONG * #define HASH_LONG_LOG2 MD5_LONG_LOG2 * #define HASH_CTX MD5_CTX * #define HASH_CBLOCK MD5_CBLOCK * #define HASH_LBLOCK MD5_LBLOCK * #define HASH_UPDATE MD5_Update * #define HASH_TRANSFORM MD5_Transform * #define HASH_FINAL MD5_Final * #define HASH_BLOCK_HOST_ORDER md5_block_host_order * #define HASH_BLOCK_DATA_ORDER md5_block_data_order * * */ #if !defined(DATA_ORDER_IS_BIG_ENDIAN) && !defined(DATA_ORDER_IS_LITTLE_ENDIAN) #error "DATA_ORDER must be defined!" #endif #ifndef HASH_CBLOCK #error "HASH_CBLOCK must be defined!" #endif #ifndef HASH_LONG #error "HASH_LONG must be defined!" #endif #ifndef HASH_CTX #error "HASH_CTX must be defined!" #endif #ifndef HASH_UPDATE #error "HASH_UPDATE must be defined!" #endif #ifndef HASH_TRANSFORM #error "HASH_TRANSFORM must be defined!" #endif #ifndef HASH_FINAL #error "HASH_FINAL must be defined!" #endif #ifndef HASH_BLOCK_HOST_ORDER #error "HASH_BLOCK_HOST_ORDER must be defined!" #endif #if 0 /* * Moved below as it's required only if HASH_BLOCK_DATA_ORDER_ALIGNED * isn't defined. */ #ifndef HASH_BLOCK_DATA_ORDER #error "HASH_BLOCK_DATA_ORDER must be defined!" #endif #endif #ifndef HASH_LBLOCK #define HASH_LBLOCK (HASH_CBLOCK/4) #endif #ifndef HASH_LONG_LOG2 #define HASH_LONG_LOG2 2 #endif /* * Engage compiler specific rotate intrinsic function if available. */ #undef ROTATE #ifndef PEDANTIC # if defined(_MSC_VER) # define ROTATE(a,n) _lrotl(a,n) # elif defined(__GNUC__) && __GNUC__>=2 /* * Some GNU C inline assembler templates. Note that these are * rotates by *constant* number of bits! But that's exactly * what we need here... * * */ # if defined(__i386) # define ROTATE(a,n) ({ register unsigned int ret; \ asm volatile ( \ "roll %1,%0" \ : "=r"(ret) \ : "I"(n), "0"(a) \ : "cc"); \ ret; \ }) # elif defined(__powerpc) # define ROTATE(a,n) ({ register unsigned int ret; \ asm volatile ( \ "rlwinm %0,%1,%2,0,31" \ : "=r"(ret) \ : "r"(a), "I"(n)); \ ret; \ }) # endif # endif /* * Engage compiler specific "fetch in reverse byte order" * intrinsic function if available. */ # if defined(__GNUC__) && __GNUC__>=2 /* some GNU C inline assembler templates by */ # if defined(__i386) && !defined(I386_ONLY) # define BE_FETCH32(a) ({ register unsigned int l=(a);\ asm volatile ( \ "bswapl %0" \ : "=r"(l) : "0"(l)); \ l; \ }) # elif defined(__powerpc) # define LE_FETCH32(a) ({ register unsigned int l; \ asm volatile ( \ "lwbrx %0,0,%1" \ : "=r"(l) \ : "r"(a)); \ l; \ }) # elif defined(__sparc) && defined(ULTRASPARC) # define LE_FETCH32(a) ({ register unsigned int l; \ asm volatile ( \ "lda [%1]#ASI_PRIMARY_LITTLE,%0"\ : "=r"(l) \ : "r"(a)); \ l; \ }) # endif # endif #endif /* PEDANTIC */ #if HASH_LONG_LOG2==2 /* Engage only if sizeof(HASH_LONG)== 4 */ /* A nice byte order reversal from Wei Dai */ #ifdef ROTATE /* 5 instructions with rotate instruction, else 9 */ #define REVERSE_FETCH32(a,l) ( \ l=*(const HASH_LONG *)(a), \ ((ROTATE(l,8)&0x00FF00FF)|(ROTATE((l&0x00FF00FF),24))) \ ) #else /* 6 instructions with rotate instruction, else 8 */ #define REVERSE_FETCH32(a,l) ( \ l=*(const HASH_LONG *)(a), \ l=(((l>>8)&0x00FF00FF)|((l&0x00FF00FF)<<8)), \ ROTATE(l,16) \ ) /* * Originally the middle line started with l=(((l&0xFF00FF00)>>8)|... * It's rewritten as above for two reasons: * - RISCs aren't good at long constants and have to explicitely * compose 'em with several (well, usually 2) instructions in a * register before performing the actual operation and (as you * already realized:-) having same constant should inspire the * compiler to permanently allocate the only register for it; * - most modern CPUs have two ALUs, but usually only one has * circuitry for shifts:-( this minor tweak inspires compiler * to schedule shift instructions in a better way... * * */ #endif #endif #ifndef ROTATE #define ROTATE(a,n) (((a)<<(n))|(((a)&0xffffffff)>>(32-(n)))) #endif /* * Make some obvious choices. E.g., HASH_BLOCK_DATA_ORDER_ALIGNED * and HASH_BLOCK_HOST_ORDER ought to be the same if input data * and host are of the same "endianess". It's possible to mask * this with blank #define HASH_BLOCK_DATA_ORDER though... * * */ #if defined(B_ENDIAN) # if defined(DATA_ORDER_IS_BIG_ENDIAN) # if !defined(HASH_BLOCK_DATA_ORDER_ALIGNED) && HASH_LONG_LOG2==2 # define HASH_BLOCK_DATA_ORDER_ALIGNED HASH_BLOCK_HOST_ORDER # endif # elif defined(DATA_ORDER_IS_LITTLE_ENDIAN) # ifndef HOST_FETCH32 # ifdef LE_FETCH32 # define HOST_FETCH32(p,l) LE_FETCH32(p) # elif defined(REVERSE_FETCH32) # define HOST_FETCH32(p,l) REVERSE_FETCH32(p,l) # endif # endif # endif #elif defined(L_ENDIAN) # if defined(DATA_ORDER_IS_LITTLE_ENDIAN) # if !defined(HASH_BLOCK_DATA_ORDER_ALIGNED) && HASH_LONG_LOG2==2 # define HASH_BLOCK_DATA_ORDER_ALIGNED HASH_BLOCK_HOST_ORDER # endif # elif defined(DATA_ORDER_IS_BIG_ENDIAN) # ifndef HOST_FETCH32 # ifdef BE_FETCH32 # define HOST_FETCH32(p,l) BE_FETCH32(p) # elif defined(REVERSE_FETCH32) # define HOST_FETCH32(p,l) REVERSE_FETCH32(p,l) # endif # endif # endif #endif #if !defined(HASH_BLOCK_DATA_ORDER_ALIGNED) || HASH_BLOCK_DATA_ORDER_ALIGNED==1 #ifndef HASH_BLOCK_DATA_ORDER #error "HASH_BLOCK_DATA_ORDER must be defined!" #endif #endif #if defined(DATA_ORDER_IS_BIG_ENDIAN) #define HOST_c2l(c,l) (l =(((unsigned long)(*((c)++)))<<24), \ l|=(((unsigned long)(*((c)++)))<<16), \ l|=(((unsigned long)(*((c)++)))<< 8), \ l|=(((unsigned long)(*((c)++))) ), \ l) #define HOST_p_c2l(c,l,n) { \ switch (n) { \ case 0: l =((unsigned long)(*((c)++)))<<24; \ case 1: l|=((unsigned long)(*((c)++)))<<16; \ case 2: l|=((unsigned long)(*((c)++)))<< 8; \ case 3: l|=((unsigned long)(*((c)++))); \ } } #define HOST_p_c2l_p(c,l,sc,len) { \ switch (sc) { \ case 0: l =((unsigned long)(*((c)++)))<<24; \ if (--len == 0) break; \ case 1: l|=((unsigned long)(*((c)++)))<<16; \ if (--len == 0) break; \ case 2: l|=((unsigned long)(*((c)++)))<< 8; \ } } /* NOTE the pointer is not incremented at the end of this */ #define HOST_c2l_p(c,l,n) { \ l=0; (c)+=n; \ switch (n) { \ case 3: l =((unsigned long)(*(--(c))))<< 8; \ case 2: l|=((unsigned long)(*(--(c))))<<16; \ case 1: l|=((unsigned long)(*(--(c))))<<24; \ } } #define HOST_l2c(l,c) (*((c)++)=(unsigned char)(((l)>>24)&0xff), \ *((c)++)=(unsigned char)(((l)>>16)&0xff), \ *((c)++)=(unsigned char)(((l)>> 8)&0xff), \ *((c)++)=(unsigned char)(((l) )&0xff), \ l) #elif defined(DATA_ORDER_IS_LITTLE_ENDIAN) #define HOST_c2l(c,l) (l =(((unsigned long)(*((c)++))) ), \ l|=(((unsigned long)(*((c)++)))<< 8), \ l|=(((unsigned long)(*((c)++)))<<16), \ l|=(((unsigned long)(*((c)++)))<<24), \ l) #define HOST_p_c2l(c,l,n) { \ switch (n) { \ case 0: l =((unsigned long)(*((c)++))); \ case 1: l|=((unsigned long)(*((c)++)))<< 8; \ case 2: l|=((unsigned long)(*((c)++)))<<16; \ case 3: l|=((unsigned long)(*((c)++)))<<24; \ } } #define HOST_p_c2l_p(c,l,sc,len) { \ switch (sc) { \ case 0: l =((unsigned long)(*((c)++))); \ if (--len == 0) break; \ case 1: l|=((unsigned long)(*((c)++)))<< 8; \ if (--len == 0) break; \ case 2: l|=((unsigned long)(*((c)++)))<<16; \ } } /* NOTE the pointer is not incremented at the end of this */ #define HOST_c2l_p(c,l,n) { \ l=0; (c)+=n; \ switch (n) { \ case 3: l =((unsigned long)(*(--(c))))<<16; \ case 2: l|=((unsigned long)(*(--(c))))<< 8; \ case 1: l|=((unsigned long)(*(--(c)))); \ } } #define HOST_l2c(l,c) (*((c)++)=(unsigned char)(((l) )&0xff), \ *((c)++)=(unsigned char)(((l)>> 8)&0xff), \ *((c)++)=(unsigned char)(((l)>>16)&0xff), \ *((c)++)=(unsigned char)(((l)>>24)&0xff), \ l) #endif /* * Time for some action:-) */ void HASH_UPDATE (HASH_CTX *c, const unsigned char *data, unsigned long len) { register HASH_LONG * p; register unsigned long l; int sw,sc,ew,ec; if (len==0) return; l=(c->Nl+(len<<3))&0xffffffffL; /* 95-05-24 eay Fixed a bug with the overflow handling, thanks to * Wei Dai for pointing it out. */ if (l < c->Nl) /* overflow */ c->Nh++; c->Nh+=(len>>29); c->Nl=l; if (c->num != 0) { p=c->data; sw=c->num>>2; sc=c->num&0x03; if ((c->num+len) >= HASH_CBLOCK) { l=p[sw]; HOST_p_c2l(data,l,sc); p[sw++]=l; for (; swnum); c->num=0; /* drop through and do the rest */ } else { c->num+=len; if ((sc+len) < 4) /* ugly, add char's to a word */ { l=p[sw]; HOST_p_c2l_p(data,l,sc,len); p[sw]=l; } else { ew=(c->num>>2); ec=(c->num&0x03); l=p[sw]; HOST_p_c2l(data,l,sc); p[sw++]=l; for (; sw < ew; sw++) { HOST_c2l(data,l); p[sw]=l; } if (ec) { HOST_c2l_p(data,l,ec); p[sw]=l; } } return; } } sw=len/HASH_CBLOCK; if (sw > 0) { #if defined(HASH_BLOCK_DATA_ORDER_ALIGNED) && HASH_BLOCK_DATA_ORDER_ALIGNED!=1 /* * Note that HASH_BLOCK_DATA_ORDER_ALIGNED gets defined * only if sizeof(HASH_LONG)==4. */ if ((((unsigned long)data)%4) == 0) { HASH_BLOCK_DATA_ORDER_ALIGNED (c,data,sw); sw*=HASH_CBLOCK; data+=sw; len-=sw; } else #if !defined(HASH_BLOCK_DATA_ORDER) while (sw--) { memcpy (p=c->data,data,HASH_CBLOCK); HASH_BLOCK_DATA_ORDER_ALIGNED(c,p,1); data+=HASH_CBLOCK; len-=HASH_CBLOCK; } #endif #endif #if defined(HASH_BLOCK_DATA_ORDER) { HASH_BLOCK_DATA_ORDER(c,data,sw); sw*=HASH_CBLOCK; data+=sw; len-=sw; } #endif } if (len!=0) { p = c->data; c->num = len; ew=len>>2; /* words to copy */ ec=len&0x03; for (; ew; ew--,p++) { HOST_c2l(data,l); *p=l; } HOST_c2l_p(data,l,ec); *p=l; } } void HASH_TRANSFORM (HASH_CTX *c, const unsigned char *data) { #if defined(HASH_BLOCK_DATA_ORDER_ALIGNED) && HASH_BLOCK_DATA_ORDER_ALIGNED!=1 if ((((unsigned long)data)%4) == 0) HASH_BLOCK_DATA_ORDER_ALIGNED (c,data,1); else #if !defined(HASH_BLOCK_DATA_ORDER) { memcpy (c->data,data,HASH_CBLOCK); HASH_BLOCK_DATA_ORDER_ALIGNED (c,c->data,1); } #endif #endif #if defined(HASH_BLOCK_DATA_ORDER) HASH_BLOCK_DATA_ORDER (c,data,1); #endif } void HASH_FINAL (unsigned char *md, HASH_CTX *c) { register HASH_LONG *p; register unsigned long l; register int i,j; static const unsigned char end[4]={0x80,0x00,0x00,0x00}; const unsigned char *cp=end; /* c->num should definitly have room for at least one more byte. */ p=c->data; i=c->num>>2; j=c->num&0x03; #if 0 /* purify often complains about the following line as an * Uninitialized Memory Read. While this can be true, the * following p_c2l macro will reset l when that case is true. * This is because j&0x03 contains the number of 'valid' bytes * already in p[i]. If and only if j&0x03 == 0, the UMR will * occur but this is also the only time p_c2l will do * l= *(cp++) instead of l|= *(cp++) * Many thanks to Alex Tang for pickup this * 'potential bug' */ #ifdef PURIFY if (j==0) p[i]=0; /* Yeah, but that's not the way to fix it:-) */ #endif l=p[i]; #else l = (j==0) ? 0 : p[i]; #endif HOST_p_c2l(cp,l,j); p[i++]=l; /* i is the next 'undefined word' */ if (i>(HASH_LBLOCK-2)) /* save room for Nl and Nh */ { if (iNh; p[HASH_LBLOCK-1]=c->Nl; #elif defined(DATA_ORDER_IS_LITTLE_ENDIAN) p[HASH_LBLOCK-2]=c->Nl; p[HASH_LBLOCK-1]=c->Nh; #endif HASH_BLOCK_HOST_ORDER (c,p,1); l=c->A; HOST_l2c(l,md); l=c->B; HOST_l2c(l,md); l=c->C; HOST_l2c(l,md); l=c->D; HOST_l2c(l,md); c->num=0; /* clear stuff, HASH_BLOCK may be leaving some stuff on the stack * but I'm not worried :-) memset((void *)c,0,sizeof(HASH_CTX)); */ }